PRS Buttstocks | Wades Best Of The Best

PRS Buttstocks | Wades Best Of The Best | On The Bench

Рет қаралды 2,903

21 күн бұрын

In this week's 'On The Bench' video, Wade runs you through his favorite PRS Buttstocks at this point in time. Follow along as Wade dives into what he likes about these stocks and what he would like to see improved upon. Links below. #texaspredatorhunting #predatorhunting #allymunitions #texas #coyote
Follow us:
allymunitions.com
allyoutdoors.com
Instagram: / allymunitions
/ allyoutdoors
/ wade.thejudge
/ texaspredatorhunting
Facebook: / wade.chandler.56808
B5 CPS Short: b5systems.com/collection/stoc...
B5 CPS Medium: b5systems.com/collection/stoc...
B5 CPS Long: b5systems.com/collection/stoc...
Magpul Gen3: magpul.com/prs-gen3-precision...
Magpul PRS Lite: magpul.com/prs-gen3-precision...

Пікірлер: 46

@txpredatorhunting 19 күн бұрын

Be sure hit that like and subscribe! We appreciate you watching!

@txpredatorhunting 19 күн бұрын

Official correction , stock weights - not sure how I got that all messed up in my notes. Exact weights on scale B5 cps 1 lb 4.4 oz Magpul prs lite 1 lb 2.8 oz Magpul prs gen 3. 1 lb. 11.7 oz

@GuacIsExtra99 19 күн бұрын

I like the prs lite and the moe pr bc I can put my thumb through the bag rider part and pull back onto my shoulder

@msquared9605 19 күн бұрын

The B5 with appropriate size cheek piece on an A5 buffer sounds like a good combo. Mostly for alphabetically aesthetic reasons

@mckimmym 19 күн бұрын

I love the PRS Gen3 on my 24” 6mm ARC. I wish I could put one on my 6mm ARC bolt gun. The adjustability in all three axis is a step above my xrs chassis.

@WagaBags 19 күн бұрын

I'm holding out for the Magpul DT-PR for my 6ARC build

@txpredatorhunting 19 күн бұрын

Should be a great light weight option for sure.

@ronws2007 19 күн бұрын

I agree. If you can afford it and the weight is secondary, the PRS Gen III is great. I have it on my AR-10 (Windham Weaponry R16SFST-308.) Putting on a rifle tube and the Gen III got rid of the T (telescoping, like a carbine stock) did change something that I had to fix. The R16 has a mid-length non-adjustable gas block. The buffer weight in the rifle tube turned out to be too light and I had overgassing symptoms. So, I mixed and matched from a few different buffers I had and got to 6.1 ounces, which works fine for the 165 to 168 grain rounds I use in that gun.

@DooxTrebucket 19 күн бұрын

My favorite is the PRS Gen 2 (the AR-15 specific model) The cheek piece is closer due to the shorter charging handle. I was lucky enough to find one online at a small shop in the color I wanted even after it was out of production.

@txpredatorhunting 19 күн бұрын

Nice

@aktideracer8710 19 күн бұрын

Luth AR has some interesting ones but I’ve never tried them. Great info as always

@txpredatorhunting 18 күн бұрын

Thanks for watching.

@gdw1316 19 күн бұрын

On the B5, I have one with the medium length versions. I am 6'4" so my LOP is long. I had an issue with where my cheek landed on the medium version. Did some digging on the internet and found that the Medium and the LONG are the SAME unit, you just have to undo 2 screws and flip the cheek riser to turn it from medium to long or long to medium. I also have the PRS v3 and the PRS Lite. Weight being no issue, the PRS v3 is the "best" in my opinion. The Luth-AR isn't bad either(super light).

@txpredatorhunting 19 күн бұрын

I have same issue with cheek pad on medium and small. I like the length of the large. And b5 does make a piece that goes over the cheek pad, makes it longer but if you have high cheek bones like myself, it’s to much on 1.5” mounts.

@kerryhall6170 19 күн бұрын

I run that prs lite stock on a heatseeker chassis with the RAR 6.5 grendel and I love it.

@zacharyfelkel7924 19 күн бұрын

How’s that chassis system? Looking at getting one for a bighorn origin. That’s why I’m watching this trying to figure out what stock I want to go with. Think I’m gunna try the magpul prs first.

@kerryhall6170 18 күн бұрын

I like it, the reason I went with it was because I wanted a chassis style platform for my RAR that I can still use the AR style mags. It's solid though and nice finish.

@stude327 18 күн бұрын

Luth AR-MBA1. Give it a go Wade.

@1776carpediem 17 күн бұрын

PRS G3 for me, heavy but very nice on my 224 Valk

@mckimmym 18 күн бұрын

I think MDT has one too.

@thermalclips 19 күн бұрын

IMI adjustable sniper stock. Has all the features of the magpul minus the angled bag rider

@txpredatorhunting 19 күн бұрын

I’ll check it out.

@maker_greg 19 күн бұрын

I'm curious about the magpul dt-pr stock. It's not out yet but it looks like a nice lightweight collapsing stock with the features of the prs model. The moe pr is out, but without the dt technology it kinda rattles.

@txpredatorhunting 19 күн бұрын

Have several, yes rattle bois.

@texlee1640 19 күн бұрын

They are as ugly as sin but I love my medium length comb B5 best overall. I've never been pleased with the Magpul PRS stocks and that helped pushed me towards the B5 in the end. I think the LMT precision stock might be even better.

@txpredatorhunting 19 күн бұрын

Gonna have to check out that lmt.

@kerryhall6170 19 күн бұрын

Hey Wade, off topic but how do I reach out to you about hunting yotes in corn fields? I live in Troy, TX and I'm surrounded by corn fields and I can hear 100s of yotes around hear but having trouble calling them in. Any help would be appreciated man.

@txpredatorhunting 19 күн бұрын

Email through the website.

@michaelcerrone1482 19 күн бұрын

I've had all of these stocks. I was not a fan of the B5. I had one that came with my Sgt of Arms 6ARC, swapped it for a PRS gen3 as soon as I could. Plus, if you're running the world's greatest bipod, you should get the matching stock as well...😂😂😂!

@txpredatorhunting 19 күн бұрын

Word!

@michaelcerrone1482 19 күн бұрын

@txpredatorhunting I literally say that all the time! Happy to see there's other ghetto rednecks out there!