PS2 PlayStation 2 Slim Discs Not Spinning

Рет қаралды 45,538

Жыл бұрын

In this video I fix a PS2 Slim which doesn't spin disc's, this is usually caused by the switch at the back of the console that detects when the lid is closed.

Пікірлер: 172

@nick4123 Жыл бұрын

Awesome video! Thanks for putting this out there. Do you know where to buy a replacement switch? Mine looks pretty damaged and I don’t think it works anymore. I need to check continuity.

@EasyConsoleFixes Жыл бұрын

I don't know where you would get a replacement switch. If the switch is damaged you can remove it and bridge across the points to get the machine working.

@valmcgregor9152 5 ай бұрын

Thank you so much for this video. I literally just did what you did to my PS2 slim and it works great now. Unfortunately I do need to get something more stronger to keep the latches inside the PS2 from un latching. At least right now the tape I have on it is working lol

@EasyConsoleFixes 5 ай бұрын

Thanks for the comment glad the video was able to help.

@Civicslayer Жыл бұрын

So I sat there having this issue thinking I would have to waste money fixing it. I had a new controller and game. But u said put tape and it was fixed. I've been playing for 3 months with no issue so THANK YOU!!!

@EasyConsoleFixes Жыл бұрын

Yeah for most people tape will work fine. Thanks for the comment, glad the video was able to help.

@fetchslaybffr Жыл бұрын

My ps2 would run ps2 games only but I just bought a dvd-r to do the free mcboot thing but the problem is the dvd won't run correctly it start spinning for seconds then stops I tried several DVDs and ps2 games and it was working but not the dvd-r how can I fix it? I only want this dvd to run so I can install free mcboot

@Retrotopia903 11 күн бұрын

A bit late but i think you need a new laser its harder for the laser to read burned discs, think thats why normal discs work for u@@fetchslaybffr

@mirexanero13 7 ай бұрын

Merci grâce à vous j'ai pu trouver le deuxième capteur et maintenant ça fonctionne

@EasyConsoleFixes 7 ай бұрын

Thanks for the comment, glad the video was able to help.

@ElSalvita Жыл бұрын

Increíble vídeo que me ha ayuda mucho a reparar mi ps2 Slim top top!

@EasyConsoleFixes Жыл бұрын

Gracias por el comentario, me alegro que el video haya sido de ayuda.

@fetchslaybffr Жыл бұрын

@Karim-Akra 11 ай бұрын

The scph-90k models have their spinning sensor built into the laser, the laser tries to read of it sees data the disc starts spinning This also means if the disc have a scratch the laser won't detect the data so the disc won't spin which gives lower possibilities of successfully loading a disc on 90k models

@EasyConsoleFixes 11 ай бұрын

I knew the 90k ones only had one lid sensor. I didn't realise they were less likely to read scratched discs, good to know thanks.

@razz5614 Жыл бұрын

will this work with the other ps2 slim models? i don't know what mine is, but imagine the disk latch is facing towards you. so the motherboard is on the left, and the drive is on the right, the vents are on the right side with the drive, and there is a circular depression between the motherboard and drive. thank you

@EasyConsoleFixes Жыл бұрын

All the PS2 slims have these two lid switches except the 90000 series consoles. These only have the one lid switch at the front of the console.

@johnnyrickens4268 Жыл бұрын

My PS2 slim was struggling to load the disc but I managed to fix it by applying pressure up to the point when it suddenly worked even without applying pressure. Since a few days it wouldn’t load PS2 games but was still able to load simple DVD discs and PS1 Discs as well. I tried cleaning the laser with Propanol alcohol but it didn’t fix the problem. Today I opened the case and tried to press both buttons in order to see if the discs would properly load then. The Discs only spin for a brief amount of time and then stop however. Do you think I should replace the entire laser with a new one?

@EasyConsoleFixes Жыл бұрын

Normally if the PS2 will only load certain types of games it is a faulty laser causing it. I have seen it caused by a damaged ribbon cable so that is also worth taking a look at.

@fetchslaybffr Жыл бұрын

@EasyConsoleFixes Жыл бұрын

@@fetchslaybffr Hi, I'm not too familiar with the DVD McBoot but I know it only works with some DVD drive versions and you have to use a DVD with the correct ISO version for your drive. If your PS2 is playing games fine there is no issue with machine so I would think the issue must be either the DVD-R or the software installed on it.

@fetchslaybffr Жыл бұрын

@@EasyConsoleFixes how to know what is my correct version of my drive?

@EasyConsoleFixes Жыл бұрын

@@fetchslaybffr This is a good video, he talks about what DVD drive versions work and what ISO to use with them. kzfaq.info/get/bejne/o5-ofKl6xNGbZ4k.html

@scpnoobers Жыл бұрын

I’m not too experienced with this kind of stuff but I opened my ps2 slim Scph-70012 because it was only reading compact discs and not dvd rom games like gta vice city, so I adjusted the laser thingy on the bottom to see if that would work which spawned another problem, the discs don’t spin. :(

@EasyConsoleFixes Жыл бұрын

The only thing I can think there is one of the lid switches has been damaged so the console thinks the lid is open or one of your ribbon cables hasn't been reinstalled correctly.

@scpnoobers Жыл бұрын

I think it was the ribbon cable because the laser does move up when turning the console on or closing the lid Edit:I fixed the ribbon cable and it spins fine. But the ribbon cable scratches

@EasyConsoleFixes Жыл бұрын

@@scpnoobers This is a common problem on these consoles. It can be fixed with some tape or glue or a new ribbon.

@scpnoobers Жыл бұрын

I’ll try the glue/tape part thanks for giving me suggestions

@heidiichigo-san3927 Жыл бұрын

My console is doing the exact same thing, the disc spins, the console tries to read the media when both sensor are pressed, but it always fails to do so returning with the error "disc cannot be read". I reflowed the back sensor in the same way you did, applying some flux on each of the 4 pins and slightly tinning them. I also changed the laser and every component of the laser assembly all to no vail, the console still refuses to read discs. I am at a loss here, perhaps is some other component located on the main board at fault here, may be some capacitor that went bad... Do you have any idea what the issue might be?

@EasyConsoleFixes Жыл бұрын

If the disc spins it does seem like its an issue with the laser. If you start the console with no disc in and press down the 2 lid sensors can you see the laser lens try to focus by moving up and down.

@heidiichigo-san3927 Жыл бұрын

@@EasyConsoleFixes Yes, the lens moves up and down in the rails and also the laser lens itself moves up and down as if is trying to read the disc... Which makes sense, since I tried the exact same laser unit assembly on another console and it works just fine. I am left puzzled as to what else the issue might be...

@EasyConsoleFixes Жыл бұрын

@@heidiichigo-san3927 The only think I can think of then is checking components on the board such as fuses etc to see if they are all ok. Unfortunatly This type of fault finding can be really difficult unless its something obvious.

@filippolippo99 Жыл бұрын

Hello, My ps2 slim (scph-70004) has problems. The discs start spinning but then stop. Sometimes they don't start spinning at all, instead sometimes the disc spins well and I can play with it. I noticed that the ribbon cable that connects to the lens has lifted and is scratching the discs. Do you think that by changing this ribbon cable, the spinning problem will also be solved?

@EasyConsoleFixes Жыл бұрын

Hi the ribbon cable lifting is a common problem on these consoles, they can be just glued back down to stop the scratching. If the cable has started to get damaged from rubbing the discs it is possible it could be causing your problem. If the two switches I show in this video are working fine and the ribbon cable is fine then the discs not spinning could also be caused by a dying laser,

@filippolippo99 Жыл бұрын

@@EasyConsoleFixesI noticed that my ps2 always reads cd's (blue disc) but only sometimes it can read dvd's (silver disc). Is it possible to solve the problem by setting the appropriate potentiometer? Do you know the ohms right values for CDs and DVDs ?

@EasyConsoleFixes Жыл бұрын

You could get it to work by changing the resistance but I would just change the laser. Adjusting the potentiometer only ever seems to be a temporary solution and changing the laser on these consoles is not too difficult. I would also check the ribbon cable. In this video kzfaq.info/get/bejne/e52FdK2ix9a2iok.html I had the same thing, the console would play blue games but not silver and it was caused by a small bit of damage on the ribbon.

@filippolippo99 Жыл бұрын

@@EasyConsoleFixes ok, In any case, i decrese the DVD potentiometer from 963 ohm to 817 ohm , is it ok ? It should't be under 725 ohm , right ?

@EasyConsoleFixes Жыл бұрын

Sorry. I don't know the correct ohm values for these lasers as I just tend to replace them. Did adjusting the laser fix the issue for you.

@freebite 7 ай бұрын

I have a PS2, everything seems to be working with it but it stops spinning after a little bit of play and it seems to randomly stop spinning. Could this be an issue with the sensors? As a secondary question: At first I thought it was the motor, so I bought a replacement disc assembly, laser and motor included, putting that in the motor doesn't spin at all but the laser moves and lights up, this is my second replacement disc drive assembly that has the same issue too. Are these replacements just bad?

@EasyConsoleFixes 7 ай бұрын

If the laser is moving the issue is not the sensors. You will have no movement of the laser or motor if the sensors are not detecting the lid is closed. Does your original motor still spin or have all motors stopped spinning. If its all motors one of the fuses on the board could have blown.

@freebite 7 ай бұрын

@@EasyConsoleFixes The original motor moves but seems to randomly stop after some time, sometimes it will stop after a couple minutes, sometimes a few seconds, other times over an hour. It will usually start spinning again after opening and closing the lid as well. Thanks for replying!

@EasyConsoleFixes 6 ай бұрын

@@freebite If the old motor works its not a fuse then. I would be surprised if the motor had failed on 2 replacement drive assemblies though so not sure what's happening there. The Lid Closed sensors are really just two switches, It is possible the solder connection on the the rear one has cracked causing the console to randomly think the console lid has been opened.

@freebite 6 ай бұрын

@@EasyConsoleFixes Alright, thanks for the help, I'll try and bypass the rear switch and see what happens. Otherwise I have no idea why the new ones won't work. Unless it's because mine has a smaller worm gear motor than the one shown in this video, would that effect anything or would it still be pretty plug--n-play? I made sure to buy ones that seem to match, I'm not using the wrong one.

@EasyConsoleFixes 6 ай бұрын

@@freebite There are are a few different lasers that go in the slims, have you definitely the right assembly for your console. Slim SCPH-7000x use a SPU3170 Slim SCPH-7500x use a PVR-802W Slim SCPH-7700x use a PVR-802W Slim SCPH-9000x uses a TDP-182W

@pvt.prinny759 Ай бұрын

I have an issue that only the blue colored discs (compact discs aka CDs) don’t read, DVDs read fine, i’m itching to play some older nippon ichi games but most of them happen to be on CD format instead of dvd

@EasyConsoleFixes Ай бұрын

That issue is nearly always caused by the laser starting to die. It's nearly always the blue discs that stop working first. I have a video of how to change the laser, it's not that difficult on these consoles.

@pvt.prinny759 Ай бұрын

@@EasyConsoleFixes nice i’ll be sure to check that out, thanks !

@paokpaok4 3 ай бұрын

whats the name of the liquid you apply before start soldering?

@EasyConsoleFixes 3 ай бұрын

The liquid is Flux, it's used when soldering to help the solder flow better.

@paokpaok4 3 ай бұрын

@@EasyConsoleFixes thanks a lot mate. Because I am new at soldering I only knew flux as a paste

@grasshoper4904 10 ай бұрын

I have had three ps2 slims with the same problem i turn the ps2 on and the ps2 wants to start spinning but then stops and it only spins the disc a fraction and then you just hear it ticking what could this issue be? It is worth noting that all thoes ps2s have been worked on for playing burnt discs with the sensors

@EasyConsoleFixes 10 ай бұрын

Normally a PS2 does this when the laser no longer works. You could try replacing a laser or adjusting the laser potentiometer to see if increasing the power gets the laser to read games. Playing burnt discs is known to be hard on the lasers, it could be worth looking into getting a HDD

@madmcmod8665 11 ай бұрын

Hi, I’ve tested the two switch method and the laser head moves down scans for a second, moves up and down (the lens), and then turns off the laser. The motor does not spin

@madmcmod8665 11 ай бұрын

Now it’s making a grinding noise when it reaches the disc spinner then it returns

@madmcmod8665 11 ай бұрын

The disc spinner does not spin

@EasyConsoleFixes 11 ай бұрын

If the laser starts to try and read the disc it means the two switches are working correctly as the console can detect that the lid has closed. It is possible that you need a new spindle motor, it can also be worth checking has the ribbon to the motor got damaged.

@Tezuk_25 Жыл бұрын

Hi I have a problem with drive not spinning at all. I tried to push these 2 swithces by hand and laser want to read the disc but drive doesn't spin at all. It say Reading disc for a second on the screen before it dissapears Do you have any solution to that?

@EasyConsoleFixes Жыл бұрын

It could be worth checking the spindle motor or the ribbon cable that goes to it. If the laser is trying to read but the disc doesn't spin at all.

@keatr0n Жыл бұрын

I know I'm a little late here, but maybe you made the same mistake I did and opened the system, turned it on, and pressed the switches, but had no disc in. If there is no disc, the laser will move and try to read for a second, then stop since it did not see a disc.

@Tezuk_25 Жыл бұрын

@@keatr0n I don't remember if I did this but whn you have shelf on and close lid with no disc, isn't the result the same? Because you can have closed console with no disc

@keatr0n Жыл бұрын

@@Tezuk_25 you can close it with no disc, but I don't think it actually spins without a disc. I had the top cover off, no disc, and when I pushed both switches down, the laser moved, but the disc didn't spin. When I insert a disc and try again, it spins up and reads just fine. My problem is with the switches, but this made me think it was with the disc drive.

@Tezuk_25 Жыл бұрын

@@keatr0n Oh yeah. I tried this countless times as a kdi. That's normal thing to do. Unfornatelly this problem occured with disc in tray

@markjewell911 4 ай бұрын

cheers feller all sorted

@EasyConsoleFixes 4 ай бұрын

Great to hear you got it sorted. What did your issue turn out to be?

@Kevin-iq8tz Жыл бұрын

So its not the pressure on the things that make the disk spin, for mine it works but, it cant read the disk or doesn't sense it, is it the disc reader that needs to be fixed? If so could you give me a link to it on Amazon and if you haven't, make a video on how to fix it

@EasyConsoleFixes Жыл бұрын

If the disc tries to spin or is spinning and not being read it probably is the laser which has gone. I have a video of changing the laser in the PS2 Slim if you want to check it out. kzfaq.info/get/bejne/geCIhMhztr7DdYE.html

@Kevin-iq8tz Жыл бұрын

@@EasyConsoleFixes Thank you so much, I'll be rewatching the video once i get the new lazer

@Mandosami Жыл бұрын

I tested the spin with holding down the relevant spots, cleaned them too...nothing. Is it worth my time resoldering, batt change. Or should I troubleshoot something else?

@EasyConsoleFixes Жыл бұрын

When you held the switches down does the laser lens move up and down or try and focus. If nothing at all happens when you press the switches down it's probably a faulty switch as the console is not detecting the lid is closed. If the lasers tries to focus but it doesn't spin it's probably a faulty spindle motor, spindle motor fuse or maybe the ribbon to the spindle motor.

@Mandosami Жыл бұрын

@@EasyConsoleFixes thanks. I'll investigate and let you know!

@Mandosami Жыл бұрын

@@EasyConsoleFixes yep. Nothing happens. The switch doesn't go green. Just stays red or goes out. Time for a new switch from somewhere you think?

@EasyConsoleFixes Жыл бұрын

@@Mandosami Sorry when I said switches, I meant the 2 switches inside the console that detect when the lid is closed. When you say "doesn't go green" to do mean the power switch of the console. If the power switch doesn't go green it could be the switch is gone or one of the fuses inside the console could have blown.

@madmcmod8665 11 ай бұрын

@@EasyConsoleFixesthis is exactly the issue I am having

@adri-pg6qo 8 ай бұрын

My button is literally broken and I have no idea how I can solder the various pins, can you tell me how I should solder

@EasyConsoleFixes 8 ай бұрын

Here is a picture of the way the switch should be soldered. imgur.com/gallery/jRa1W Only one of these solder joints is needed, this person did both just to be sure.

@stealthsrt4 7 ай бұрын

thank you, my disc didnt spin it seems a lil bit stiff, but i will look at the switch, and plus the power cable connector, i have to put a tiny bit of pressure to get it to power on

@EasyConsoleFixes 7 ай бұрын

There's a little brake at the back of the disc that moves out of the way when the lid closes, is that why it feels stiff. The power connector is an easy fix if you can use a soldering iron. I have a video of how to do it if you want to check it out.

@strudsens 10 ай бұрын

in the beginning i clicked both the sensor buttons to try and get my disk drive to move but it won’t move and it shut off the console every time. any solution?

@EasyConsoleFixes 10 ай бұрын

I don't want to ask an obvious question but the one at the front, are you pushing down the little leaver and not touching the power button which is on the same board. If not it could be worth checking is it a faulty power board.

@strudsens 10 ай бұрын

@@EasyConsoleFixes Hey that was my guess, I was pressing down the power button lever and the sensor at the back at the same time, after a bit it would just shut off not do anything, I've even tried putting the disk in, and turning the console on, and it turns the console off automatically. Im probably going to try and switch the power board, but if thats not the issue then I might end up listing it as parts or repair, because I have no clue how to fix it haha.

@miljlaseras3499 3 күн бұрын

None of thee quick fixes work on mine, not even replacing the spindle helped. Any idea what is wrong?

@EasyConsoleFixes 3 күн бұрын

It depends on what the console is doing, When you held the switches down does the laser lens move up and down or try and focus. If nothing at all happens when you press the switches down it's probably a faulty switch as the console is not detecting the lid is closed. If the lasers tries to focus but it doesn't spin it's probably a faulty spindle motor, spindle motor fuse or maybe the ribbon to the spindle motor.

@miljlaseras3499 3 күн бұрын

@@EasyConsoleFixes there's a fuse for the spindle motor? Where is it located? The buttons for the lid work as they are supposed to, laser is moving, but the cd spindle don't move. I changed this one today since I believed it were the problem, but it still don't spin. The PS2 start up and show the main screen and the contents of the memory cards. It's only the spindle that don't spin.

@EasyConsoleFixes Күн бұрын

@@miljlaseras3499 It does seem then like spindle is not getting power if everything else seems to be working. Here is a link showing the fuse locations on the different PS2 motherboards. www.ps2-home.com/forum/viewtopic.php?t=2779

@Dragonman1477 Жыл бұрын

I have a slight issue. My silver PS2 slim won't spin and so i opened it up and found that it doesn't have the sensor in the back like the one shown in the video. This PS2 worked perfectly in the past so i need help

@EasyConsoleFixes Жыл бұрын

Yes the later model PS2 slims only has the one lid switch at the front of the console. When you press this switch down does the motor try and spin.

@Dragonman1477 Жыл бұрын

@@EasyConsoleFixes it does not. I figure it must have gone faulty as i have hooked power to it and then attempted to see if it would spin and it does not spin in the slightest.

@EasyConsoleFixes Жыл бұрын

@@Dragonman1477 does the laser lens move move up and down and try and focus. If nothing at all happens when you press the switch down it's probably a faulty switch. If the lasers tries to focus but it doesn't spin it's probably a faulty spindle motor or maybe the ribbon to the spindle motor.

@Dragonman1477 Жыл бұрын

@@EasyConsoleFixes no so it has to be the switch.

@dragonknight2992 Жыл бұрын

Can you do tutorial to cleaning the laser..i dont know how to cleaning the laser

@coremythicbrawl-stars6636 Жыл бұрын

In my ps2 slim on the screen it is written that There is no data and underneath that it's written reading disc

@EasyConsoleFixes Жыл бұрын

That sounds like the PS2 is trying to read the game but cant, it's mostly likely an issue with the laser.

@hafihashim Жыл бұрын

@@EasyConsoleFixesbro mine just spins fine but after it stops and spins again what is the problem ?

@EasyConsoleFixes Жыл бұрын

@@hafihashim That seems like your laser is not able to read the disc.

@hafihashim Жыл бұрын

Laser blinks according to the cd is there a problem ?

@EasyConsoleFixes Жыл бұрын

@@hafihashim I'm not sure what you mean by "laser blinks according to the CD. If it is a dying laser you could try adjusting laser potentiometer to see if that helps.

@tayeescobar5689 11 ай бұрын

Good evening. What if you push down both sensors and tue disk doesnt spin?

@EasyConsoleFixes 11 ай бұрын

@tayeescobar5689 11 ай бұрын

@@EasyConsoleFixes thanks! Turns out, the problem is the switch in the rear. Going to try to tape it down.

@EasyConsoleFixes 11 ай бұрын

@@tayeescobar5689 If the tape doesn't work you could also try soldering across the pads under the switch.

@juliomeza2688 4 ай бұрын

Hi could someone please tell me where is the cmos battery on this version of the ps2?

@EasyConsoleFixes 4 ай бұрын

On this model it's under the shielding on the top side over near the power jack. It's just a standard CR2032, there's a plastic holder on the board for it, not like the other ones which have a CR2032 attached to wires with a connector.

@AlKaseltzer87 8 ай бұрын

I can't find anyone having the problem I have with mine. I had it stored in a drawer for about a year. Worked when I put it away, I got it out to play, out the disc in closed the door, the laser moved, lit up, but the motor wasn't spinning. I still get it out every once in a while to mess with it, but everything I find always points to those switches, which both work perfectly. I think the motors fried.

@EasyConsoleFixes 8 ай бұрын

If the laser is moving but the motor makes no attempt to spin it does seem that the issue is the motor. Could be worth checking the ribbon cables to the motor first as some times these can be damaged

@Borzman21 Жыл бұрын

my disc reader doesn’t spin or move and it doesn’t show that it’s trying to read the disc amy solutions ?

@EasyConsoleFixes Жыл бұрын

Have you checked the 2 lid switches I show in the video are working.

@Jasbd3if 4 күн бұрын

im pressing both switches but the disc still doesnt spin what should i do?

@EasyConsoleFixes 4 күн бұрын

@leogarvey9432 Ай бұрын

I was using the psp charger on mine could that be the issue?

@EasyConsoleFixes Ай бұрын

That could be your issue. The PSP charger outputs 5 volt and a PS2 Slim charger outputs 8.5 volts so the PS2 may not be getting enough power.

@leogarvey9432 Ай бұрын

@@EasyConsoleFixes interesting, that would make Sense as the machine has never had any issues with it’s optical drive besides some dvd playback errors.

@Sillysoft 10 ай бұрын

So the laser wouldnt cause the disc to stop spinning? I just had a slim not read disc but also not spin up at all. I replaced the laser and it spins and reads discs just fine. Im learning, so any pointers/info would be appreciated because I would really like to learn how to fix consoles.

@EasyConsoleFixes 10 ай бұрын

Did the old laser try and do anything at all. Even if it didn't spin did the lens move up and down to try and focus. I would have thought the console would spin a little and then stop if the laser was dying but maybe if the laser was completely dead it might not try and spin at all.

@LoafMan_445 Жыл бұрын

The laser thing goes down to where the disc is but it doesn't spin

@EasyConsoleFixes Жыл бұрын

If you have checked that these two switches are working and the disc still doesn't spin the console may need to have the spindle motor replaced.

@LoafMan_445 Жыл бұрын

) :

@danishirfan1134 Жыл бұрын

bro my ps2 can spin and laser still works but can't read the disc and always comes out red screen of death...the disc is played on my friend's ps2 but my ps2 can't read the disc...please help me bro..

@EasyConsoleFixes Жыл бұрын

It may need a new laser, changing them in these consoles is fairly straight forward and the new lasers are fairly cheap.

@danishirfan1134 Жыл бұрын

@@EasyConsoleFixes is it ok if i clean the laser without buying a new one??if i clean the laser can it read the disc again?

@EasyConsoleFixes Жыл бұрын

@@danishirfan1134 If you cleaning the laser got it sorted that's great, a nice easy fix.

@danishirfan1134 Жыл бұрын

@@EasyConsoleFixes What cleaners are good for laser cleaning?

@EasyConsoleFixes Жыл бұрын

I always use IPA (Isopropyl Alcohol). You just want to use something that wont leave any residue.

@user-by8pq5dg3e Жыл бұрын

I want to install ps2 portable. Can I or not?

@EasyConsoleFixes Жыл бұрын

Do you mean the portable screen which attaches to the console

@damienburton906 Жыл бұрын

My ps2 just turns off when the disk thing is closed and won’t turn on unless it’s open dose anyone know how to fix it

@EasyConsoleFixes Жыл бұрын

This sounds like one of the fuses has blown, there could also be another issue with the console which caused the fuse to blow so both would need to be fixed.

@tito5646 2 ай бұрын

Ou s'achète le composant ?

@EasyConsoleFixes 2 ай бұрын

Je ne suis pas sûr que des remplacements puissent être achetés. J'ai toujours juste réparé le switch de la console en les ressoudant.

@JusRELLreallyHIM Жыл бұрын

When I Put A Disc In, The Laser Eye Moves But The Disc Still Doesn’t Spin

@EasyConsoleFixes Жыл бұрын

Is it possible that the spindle motor has stopped working or maybe the ribbon cable which goes too the spindle motor has become damaged

@JusRELLreallyHIM Жыл бұрын

@@EasyConsoleFixes I Fixed It, I Just Moved The Laser Casing Closer To The Disc Clamp/Holder After I Took The Back Of It Off & Cleaned It From The Dust & Such. With Some Games Tho, It Doesn’t Always Spin Consistently, It Slows Down A Lil Sometimes

@EasyConsoleFixes Жыл бұрын

@@JusRELLreallyHIM Glad to hear you were able to get it sorted, the PS2 is a great machine.

@JusRELLreallyHIM Жыл бұрын

@@EasyConsoleFixes Thank You & Yeah, Me Too

@fetchslaybffr Жыл бұрын

@@JusRELLreallyHIM My ps2 would run ps2 games only but I just bought a dvd-r to do the free mcboot thing but the problem is the dvd won't run correctly it start spinning for seconds then stops I tried several DVDs and ps2 games and it was working but not the dvd-r how can I fix it? I only want this dvd to run so I can install free mcboot

@colaboy5796 Жыл бұрын

my ps2 dosent even spin the disc any tips how to fix??

@EasyConsoleFixes Жыл бұрын

If you have checked the two switches in the video are ok and the disc still doesn't spin you could have a broken spindle motor or the ribbon cable to the motor could be damaged or loose and is worth checking.

@colaboy5796 Жыл бұрын

@@EasyConsoleFixes yh no spinning even the lazer thingy dosent move

@EasyConsoleFixes Жыл бұрын

@@colaboy5796 That does seem like one of the switches is not working and the console is not registering that the lid is closed.

@paperwowpaper Жыл бұрын

Not spinning

@markusmitchell8585 3 ай бұрын

Whats the parts name?

@EasyConsoleFixes 3 ай бұрын

The part is the lid sensor or lid switch.

@killerbrad0084 Жыл бұрын

When you say tape can that just be normal celetape

@EasyConsoleFixes Жыл бұрын

Yeah that's fine, it's just needed to hold down the switch.

@Nik-6675 Жыл бұрын

Still doesn't work

@EasyConsoleFixes Жыл бұрын

If you are sure the lid closed switches are working correctly and the disc still doesn't even try and spin then the issue is probably with your spindle motor. It may be worth checking the motor, ribbon cable to the motor and the fuses on the board to make sure these are ok.