PT3 $500 Fiero GT. Fix exhaust leak, Engine cradle weld, clean heater fan, trunk wires

Рет қаралды 3,730

9 ай бұрын

Ordered parts, key ignition, door locks, shift select cable and did some engine cradle rust repairs. Welded in some patch panels, thats the only rust I found underneath after inspection.
Vacuumed the front compartment, took out the heater blower motor and cleaned the mouse nest out of there. AC works! But sucked up an acorn and had to remove blower again to get the nut out.
Patched the rust hole in engine trunk with fiberglass reinforced bondo, painted and installed the rear carpet
Fixed the trunk relaese and door ajar switch wires that go through the trunk lid. Soldered the broken wires together and used heat shrink tubing. Now the electric trunk lock works and so does the door ajar light.
The $500 fiero project car runs great so far. Killer deal
Fiero GT Playlist: • $500 1987 Fiero GT
Total cost for this 1987 Fiero GT project:
$500 for the Fiero
Ignition and door locks $50
Shift select cable $93
Links:
Fiero GT perfect fit outdoor car cover: amzn.to/3PJrpVQ
-------------------------------------------------------------------------------------------
Like my videos? Links below, be sure to like and follow please :)
Fiero project playlist:
Thanks you for watching, PLEASE subscribe!
▽ Follow MotoCheez
Instagram: / motocheez
Facebook: / motocheez
Web: www.MotoCheez.com
Copyright Disclaimer Under Section 107 of the Copyright Act 1976, allowance is made for "fair use" for purposes such as criticism, comment, news reporting, teaching, scholarship, and research. Fair use is a use permitted by copyright statute that might otherwise be infringing. Non-profit, educational or personal use tips the balance in favor of fair use.
Custom intro music and Voiceovers by Harp C Chord, Ryan Harper.

Пікірлер: 120

@zibafairchild6185 9 ай бұрын

Them tail lights are worth more than $500, so you did real well!

@peteryoung3122 9 ай бұрын

I'm an old car guy I worked on cars for 44 years get yourself some jack stands going under that car with only the floor jack is an accident waiting to happen. I love the car great deal

@MotoCheez 9 ай бұрын

I did use the stands while I was under the car, removed when welding and video, which was dumb I know!

@dlwhite6537 9 ай бұрын

Wow I thought all these cars were long gone. There was a legend that they all caught fire and were destroyed.

@MotoCheez 9 ай бұрын

Many did, all of it was because of debris that would fall on a manifold and catalytic converter

@billcotton1551 9 ай бұрын

Cheezy , I have a friend who has 2 Fieros ,I referred him to your channel, he is gonna love this!

@gubr 9 ай бұрын

Also like the retro rims. Just fit the age of the car.

@DirtyDiezel 9 ай бұрын

1 for you, and 1 for your kid, I think thats an exxxxxxxcellent idea :) GET IT CHEEZY!

@Timmy-il1hb 9 ай бұрын

Fieros are FUN CARS!!! I had a 2M4 with the iron duke and it would scoot it came with telekinetic steering lol. That's awesome you can make the camera fly right above your hand!

@Slane583 9 ай бұрын

I'd say for $500 you scored big on that one. Especially with how very few problems it has for its' age. As for your wheels, there's not really anything wrong with them. But IMO they don't match the car too well. I'm used to seeing that style but I've always seen them on Firebirds/Camaros and Silverado pickups. So I think the issue is they're too "muscle" looking for a small sporty car. Especially a car that is European inspired. I think the Fiero needs a nice set of wheels with a sporty star pattern. Just my OP, it's not my car so it's not my place to say. 😁

@MotoCheez 9 ай бұрын

They're not my first choice, but they're not ugly to me

@Slane583 9 ай бұрын

@@MotoCheez Nah, they're not that bad. I've seen far uglier and tackier looking wheels that people have had on cars they shouldn't be on.

@jaredshadley 9 ай бұрын

You can replace the door striker pins with the Dorman FORD pins. Will stop door light and door rattle when window is down. (New hinge pins if worn are recommended but issues will come back)

@MotoCheez 9 ай бұрын

Thanks! I'll definitely do this if it persist, I drove it last night and it seemed ok, I'm thinking maybe the rear lid wires shorting or something

@dorsk84 9 ай бұрын

Saw this vid about an hour after seeing someone on Marketplace selling one. They put in alot of work into it and a 350!!!

@MotoCheez 9 ай бұрын

I saw one with a 350 in it but I guess it's been sitting they were going to take the motor out of it for another project. The 350s kind of heavy unless it has a lot of work to get some horsepower out of it. In LS swap would be ideal! I have a SBC 350 sitting in my other garage complete but I think it's too heavy....

@kevinnashskitchen3517 9 ай бұрын

Pimp my Fiero 😁👍 Do a series of mods to make it rise and shine! Collectable car 😬See if you can spend under 10k on one and get 15k for it in 3 years or something.. 😂 Just an example .. Be safe and use some jack stands bro!😁

@MotoCheez 9 ай бұрын

Yeah CDs cars are crazy priced. I'll definitely throw a decent paint job on it

@slowpoke71 9 ай бұрын

You got a hell of a deal on that

@MotoCheez 9 ай бұрын

I agree!

@knerdrider 9 ай бұрын

You have mini-truck. This should be mini-KITT. 😊

@moonpie1616 9 ай бұрын

Made me so happy when you showed us what was wrong with the blower the second time...😅😊 Curiosity gets the best of me

@vernonjjf 9 ай бұрын

My mother warned me about people like you! :)

@MotoCheez 9 ай бұрын

She was right!

@captsam54 9 ай бұрын

You Da Man.. Following up on each and every thing you need to get that car straight..!! Well except for the funky Duct tape..lol

@MotoCheez 9 ай бұрын

😁👍

@1985FieroGT 6 ай бұрын

with the ignition on, trunk latch only works with the parking brake, with ignition off, it works regardless

@MotoCheez 6 ай бұрын

Ahhh. Ok. Wire was broken to trunk I fixed too

@tallboy2234 9 ай бұрын

Nice ride! Cheezy👍😉

@kevinnashskitchen3517 9 ай бұрын

Nice cover for car. Cool!

@Foche_T._Schitt 9 ай бұрын

Put some fungus killing fuel treatment in the gas tanks as a precaution.

@tonybosen701 9 ай бұрын

Nice score on the car thats a fun little cruzer

@rex4x4 9 ай бұрын

Frig mannnn .... I havent seen a fiero that clean in years

@MotoCheez 9 ай бұрын

I agree I looked at a few, I got a killer deal!

@rex4x4 9 ай бұрын

@MotoCheez my mechanic buddy up here has a gt in his back garage ... been there for 5 years .... customer disappeared and diddnt pay his bill ..... 0 rust on that one .

@MotoCheez 9 ай бұрын

@rex4x4 awesome

@richgenalski8639 9 ай бұрын

sweet car bro my favorite besides Subaru bratt

@MotoCheez 9 ай бұрын

Yeah I love the Brats too

@woodyTM 9 ай бұрын

It really does sound exactly like my '88 Z24, that sucker is loud

@tonybosen701 9 ай бұрын

Please put jack stands under the car man i like this channel and i want you around a long time

@MotoCheez 9 ай бұрын

I had stands under it when I was under it doing the exhaust I took him out when I was welding cuz he got in the way of recording. But yeah you're right!

@rc2634 9 ай бұрын

I like the looks of this one more, compared to the future Superchegarged

@joshriver75 9 ай бұрын

I think that little green box you removed above the blower was one of the electronic rust prevention systems.

@MotoCheez 9 ай бұрын

It was a remote alarm system, I looked up the model

@diamond_industries 9 ай бұрын

If the interior has a mouse smell I have had luck putting a few scoops of fresh coffee grounds in a coffee filter and zip tying it closed. Kind of resembles a big version of those old snap pops you throw on the ground. Anyway I hang hang it from the rear view and I have had luck with the smell going away and it smells like coffee and haven’t had mice try to eat it. Done it a few times and no problems and the smell goes away.

@MotoCheez 9 ай бұрын

Wow I never heard that, I'll give it a shot It doesn't really smell too bad though

@d.j.9961 9 ай бұрын

Best yhing to avoid a check engine light on O2 sensors is spark plug anti fowlers.

@mellow1163 9 ай бұрын

When i had my fiero it went through the snow great. Mine got stolen, be careful they are so easy to steal.

@MotoCheez 9 ай бұрын

I don't plan on taking this in the snow I don't want it to rust anymore, there's no security key on these so they are easy to steal unless you put a ignition disable switch somewhere which isn't a bad idea

@mellow1163 9 ай бұрын

@@MotoCheez the way they got mine was they popped a hole in the plastic right behind the key and then all they had to do is push the metal rod from the ignition forward and it will start. What a bad design, it probably took them 40 seconds to take.

@MotoCheez 9 ай бұрын

@mellow1163 The other fiera I got was stolen too and then recovered a few days later it's on the VIN report. This one doesn't even have a key yet they just forced the ignition to turn on that's how I've been driving until I get my key sets

@gabriel-hn5ok 9 ай бұрын

WUT up cheezy ?!? nioce car btw !

@MotoCheez 9 ай бұрын

Same old, thanks!

@gabriel-hn5ok 9 ай бұрын

goood @@MotoCheez

@michaeldrum8700 9 ай бұрын

High flow cat😂😂😂

@timothybroga1704 9 ай бұрын

He he he

@kevinkehlet1543 9 ай бұрын

Dude, where's your jack stands? Sorry my safety side kicked in lol

@MotoCheez 9 ай бұрын

I put them under but moved them a few times because they got in the way. Saftey first for sure! Was waiting for someone to notice 😁

@josephsaucedo8691 9 ай бұрын

Hi cheese you asking the last time about the ignition and I think I misunderstood a push button set up by passes all of the ignition set up on the steering column as long as you can move the wheel it will start and drive. If the car battery dead that when you would have to supply power some how to keep it running jumpers to a good battery or its got a real good charging system . it a nice set up if you don't have keys if it die you have to hook up the push button. It basically send power straight to the starter turning the car over when button pushed.👍💯👊🍻

@MotoCheez 9 ай бұрын

Yeah that'll work on the older cars but not the chip or RFID cars. As long as you can bypass the steering lock that is

@josephsaucedo8691 9 ай бұрын

@@MotoCheez yup exactly on the old car you cut the rod if you don't care about it locking again and for the RFID and other signals its not a problem with a tool called flipper zero it can send any signal basically to the car that you want if you know how to use it right that is💯👍🍻👊

@MotoCheez 9 ай бұрын

@josephsaucedo8691 He had a flipper zeros only work if you can get the RFID code to start with. On a car you don't know you're going to have a problem

@josephsaucedo8691 9 ай бұрын

@@MotoCheez yup I'm sure they have it by now the technology behind it moving extremely fast now the apps are definitely a game changer as long as you know what file to use off get hub.😇💯👍👊

@MotoCheez 9 ай бұрын

@josephsaucedo8691 It's a digital key code with millions of combinations. They're probably is a way to scan but it would take a long time

@justinmcroberts4633 9 ай бұрын

Im not a fan of most American Racing wheels, but those seem to fit it.

@jasonstring9156 9 ай бұрын

Yeah the exhaust manifolds are leaking-super common problem on them, mine are leaking too 😂 The bolts are very prone to breaking off and most likely will

@MotoCheez 9 ай бұрын

I kind of figured that, of course the AC compressors in the way

@jasonstring9156 9 ай бұрын

@@MotoCheez yeah the front manifold is easy to get to, but those damn bolts😂3 out of 6 broke off on mine in the block😕

@MotoCheez 9 ай бұрын

@jasonstring9156 Don't seem too easy with that AC compressor in the way. Did you do the welder with a nut to get them out, that's what I'm afraid of, them breaking off

@jasonstring9156 9 ай бұрын

@@MotoCheez yeah that back manifold by the AC is not fun you can get to it on the top by removing your decklid for more hand clearance. If they break yeah it sucks. You can try that method, sometimes pulling the head is the only way. I’m swapping in a 4.9 caddy v8 so I’m just living with the leak for now

@thumpersquid 9 ай бұрын

Your welder sounds like a cheezy fart through my laptop speakers LOL

@MotoCheez 9 ай бұрын

🤣😂

@wonyankeesays5661 9 ай бұрын

YAYYYYYYYYYYYY

@MotoCheez 9 ай бұрын

1st!

@Motorider2018 9 ай бұрын

👍👍👍👍👍🔥🔥🔥🔥

@RatdogDRB 9 ай бұрын

I see mama got her parking spot back. I wondered how long that'd fly. Would one of those brushes used for cleaning dryer ducts help in conjunction with the vacuum to get where you're struggling to reach inside the blower ducting?

@MotoCheez 9 ай бұрын

Yeah I moved it before she got home, I didn't think of a brush I just used one of those trim remover things to loosen up the stuff

@DirtyDiezel 9 ай бұрын

tube snake?? lmao

@richardp6178 3 ай бұрын

Use axle stands!

@MotoCheez 3 ай бұрын

I did!

@jamesbramlett5407 9 ай бұрын

your buddy Brian looks just like that old guy in Big Daddy - Sandler's girlfriend's new boyfriend... the one with a five year plan, 'don't die' :) Cool ride tho, always secretly like Fieros...would be fun to electrify one

@MotoCheez 9 ай бұрын

Haha. I see it. I thought about making the other one electric but after pricing out what it would cost for a motor batteries controller and all that it was over $10,000. Wow

@1357winter 3 ай бұрын

floor jack is an accident waiting to happen

@MotoCheez 3 ай бұрын

Yes! I did have stands, most the time....

@jasonstring9156 9 ай бұрын

The ajar light could also be your decklid switch, check that

@MotoCheez 9 ай бұрын

I think that's what it was, toward the end of video I rewired deck lid because the wires were broken off where the hinge goes up and down

@jasonstring9156 9 ай бұрын

@@MotoCheez I saw that 😎 yeah I’m soo excited for these videos too-since they’re my favorite oddball car. I’m gonna order another Chonda bike soon also😂 I was hooked when I bought a hellcat 125 and a Raven 250

@MotoCheez 9 ай бұрын

@jasonstring9156 Thanks! Yeah those trying to bikes are addicting because they're so cheap you can have a lot of them

@gubr 9 ай бұрын

Maybe use snake camera to look into the ducts and see mr. and mrs. mice go at it?

@MotoCheez 9 ай бұрын

Good idea

@Sinerwray 9 ай бұрын

Put a snake camera in the vents and use Lysol to kill mice pee pee 😂

@DirtyDiezel 9 ай бұрын

Hey cheez, I want more top speed on the TBR7. Chain says 530, and I counted 12 teeth on the sprocket. So should I get a 15 tooth 530 sprocket?

@MotoCheez 9 ай бұрын

I believe you can only fit a 13t with the 530

@DirtyDiezel 9 ай бұрын

@@MotoCheez it goes from 12 to 14

@DirtyDiezel 9 ай бұрын

@MotoCheez I ordered a 14 and a 15, I will let you know what happens!

@MotoCheez 9 ай бұрын

@MotoMeat ok. Thanks

@DirtyDiezel 9 ай бұрын

your door is a jar? lol

@MotoCheez 9 ай бұрын

😀🤣😂

@frankmc5021 9 ай бұрын

I can't drive 55! Hahaha

@paulnunya3429 9 ай бұрын

I agree with Vee, the wheels are ugly. They are Cheese Master 1989 wheels. High school kids back in the 80’s thought these were cool. They never were cool. Lol 😂 imo

@MotoCheez 9 ай бұрын

That's 3 so far!