PTO Stump Grinder~Woodland Mills WG24 on back of my TRACTOR!
Рет қаралды 10,528
4 жыл бұрынHow To Change The CUTTING TEETH on a PTO Stump Grinder~EASY~Woodland Mills WG24.
The Woodland Mills WG24 PTO Stump Grinder is an awesome piece of equipment and you can easily change the teeth on them yourself!
Brandell's new channel:
/ @bigorangetractors
We post videos of tractors and homestead implements here on the farm! Just hit the red button and the bell icon to be notified when we release new videos! It is 100% FREE 😍
AMAZON*
🎁 AMAZON STOREFRONT: amzn.to/2Ve3F1Y
👨🏻🌾 👩🏼🌾 Our website!
www.hamiltonvillefarm.com
🚜 MAHINDRA PARTS: www.4mymahindra.com
SAVE 10% with code: HANK
❤️ TEESPRING*: teespring.com/stores/hamilton...
💰 PAYPAL: Hamiltonvillefarm@gmail.com
---------------------------------------------------------------------------------------------------------------------------------
Products we use on the farm:
⛓ SawHaul*
www.sawhaul.com
Get 5% off with PROMO CODE: HANK
🦏 RhinoHide Canopy*
www.rhinohidecanopies.com
Tell them Hamiltonville Farm sent you!
👍🏼 SureCan
www.surecanusa.com
Tell them Hamiltonville Farm sent you!
🚜 TITAN ATTACHMENTS*:
www.jdoqocy.com/click-9172484-...
🚑 My Medic FAK*
www.anrdoezrs.net/click-917248...
---------------------------------------------------------------------------------------------------------------------------------------
Find us on INSTAGRAM: @Hamiltonvillefarm
FACEBOOK: Hamiltonville Farm
TWITTER: @Hamiltonvllfarm
*Some inks are affiliate links. If you click on the link and purchase a product ,then we receive a small commission.
#Hamiltonvillefarm #howboutcha
@dougdinsmore9751 Жыл бұрын
If you watch a Woodland Mills video or read the manual that came with the grinder it specifically states to start grinding from the right edge of the stump (when you are standing behind the stump and tractor look forward). You should only be grinding with the lower left quadrant of the wheel. That way the grinder isn't trying to walk across the top of the stump. It all about physics.
@HeritageFarmsTexas 4 жыл бұрын
The great videos continue to roll. That’s a nice piece of equipment.
@HamiltonvilleFarm 4 жыл бұрын
Thanks Scott. I appreciate you. 👍
@HamiltonvilleFarm 4 жыл бұрын
Check out my other PTO stump grinder video here: kzfaq.info/get/bejne/n8CUrdKC3rTVaYU.html
@terrymangum3914 4 жыл бұрын
It looks easy when you have someone who knows what he is doing and has the tools to do it. Enjoyed the video and I subscribed to Brandell's new channel last night. We have rocks everywhere around here.
@HamiltonvilleFarm 4 жыл бұрын
Thanks Terry. I appreciate you and your support 👍
@BigOrangeTractors 4 жыл бұрын
Having the tools, or the ability to make them, definitely makes any job easier.
@jasoncline4383 4 жыл бұрын
Nice video guys. I always wondered how to use those torque adapters, thanks Brandell and grats on your channel. I'll be watching.
@HamiltonvilleFarm 4 жыл бұрын
Thanks Jason. Hope you have a Merry Christmas 👍
@StanleyOrchard 4 жыл бұрын
Awesome video my friend and Randall’s channel is awesome as well! Love what you guys do and from our family to yours we would like to wish you a very merry Christmas guys! Looking forward to seeing what 2020 has to bring!
@HamiltonvilleFarm 4 жыл бұрын
Thanks brother. Back at ya. Merry Christmas 👍
@georgebell7103 4 жыл бұрын
Thanks for the nice video... according to the WM operator manual, the grinder should attack the stump right to left. This will pull the grinder down into the stump. Grinding from the left or middle will cause excessive vibration and jumping.
@HamiltonvilleFarm 4 жыл бұрын
Thanks for that Mr George 👍 I appreciate the comment.
@HeavensGatesCherryFarm 4 жыл бұрын
Love watching this video great job!!!🍒👍
@HamiltonvilleFarm 4 жыл бұрын
Thank you Larry I appreciate you.
@RavensRidgeNC 2 жыл бұрын
Quick note on the torque adapter (nice fab, btw!), just received the WG24 and they now ship one with the grinder. Your vids helped convince me it was worth it - thanks!
@HamiltonvilleFarm 2 жыл бұрын
It’s a good product👍
@houndsmanone4563 4 жыл бұрын
Good tag-team effort Hank. I'm on it Brandell. I'll be over to join your channel. Full-watch.
@HamiltonvilleFarm 4 жыл бұрын
Thanks Don. I appreciate you watching as always. Have a merry Christmas 👍
@BigOrangeTractors 4 жыл бұрын
Thanks so much! Teamwork does make the dream work.
@RCAFpolarexpress 4 жыл бұрын
Good eveing Sir, That stump Grinder is great !!! and your partner is very funny !!! Great team !! Cheers !!!
@HamiltonvilleFarm 4 жыл бұрын
Thanks buddy. Hope you have a merry Christmas. 👍
@RCAFpolarexpress 4 жыл бұрын
@@HamiltonvilleFarm Thank you Sir, you too have yourself a great Christmas time with your love ones !!! Cheers !!! ( Joyeux Noel !!! )
@ReapWhatYouSeauxLeJeune 4 жыл бұрын
Great job y’all. I use to work for a company The would fly me around all over to run a mulching Machine . We would clear under the big timber. Yes them teeth last a long time . Fire prevention
@HamiltonvilleFarm 4 жыл бұрын
That's cool man. I appreciate you watching Todd👍 (or Jeriath 😊)
@brucewayne857 8 ай бұрын
I notice that when your grinder contacts the stump, it jerks to the side. You should take the side to side play out of your 3 point arms and it won’t jerk like that.
@tifttyson 4 жыл бұрын
BTW, I subscribed to Brandell’s channel. He knows a lot.
@BigOrangeTractors 4 жыл бұрын
Thanks so much. I've had some good teachers, this guy included!
@HamiltonvilleFarm 4 жыл бұрын
Yes he does.
@JohnAmes 4 жыл бұрын
Merry Christmas my friend's
@HamiltonvilleFarm 4 жыл бұрын
Merry Christmas John 👍
@BradMyers 4 жыл бұрын
I like the new intro. Besides Randell's great skills, I think you like to hang around him because he has orange tractor (not the orange tractor, but at least an orange one). :)
@HamiltonvilleFarm 4 жыл бұрын
Lol. I like hanging out with him because he's a cool cat. I'll switch him to red😂😂😂 Merry Christmas Brad!
@BradMyers 4 жыл бұрын
@@HamiltonvilleFarm Merry Christmas to you and the wife.
@noonerstrickland1743 4 жыл бұрын
I subscribed to Brandell’s channel. Any friend of Hambone is a friend of mine!
@HamiltonvilleFarm 4 жыл бұрын
woot woot!! Thanks Colonel!
@CamppattonFamilyCompound 4 жыл бұрын
Interesting. When I worked for an underground construction company, we build a 18" wide 5' diameter grinder that went on an excavator instead of the bucket. We could grind stumps, asphalt pavement, and hard sandstone with it. Only four of the equipment operators were allowed to use it. It took a light hand on the controls.
@HamiltonvilleFarm 4 жыл бұрын
Easy process 👍
@brandellfleming3225 4 жыл бұрын
I actually used the WG24 to dig a drainage ditch for Hank and Gina. Except it was on accident, when I didn't raise the grinder up while moving at one point!
@CamppattonFamilyCompound 4 жыл бұрын
@@brandellfleming3225 Hopefully it was were they needed it. My Kioti is a little small for the WG24 and we only have one tree we may take down next year. I can dig it out with the backhoe attachment.
@BigOrangeTractors 4 жыл бұрын
@@CamppattonFamilyCompound what do you have? They are rated for 20-45 hp machines, but I have seen these, or similar style, work on as small as a Deere 1025r.
@CamppattonFamilyCompound 4 жыл бұрын
@@BigOrangeTractors CS2510
@tomsommers4954 3 жыл бұрын
Do you think this stump grinder would work on a category 2 tractor hitch? Thanks
@JoeMGajdowski Жыл бұрын
Permatex anti-seize seems to be very underrated on You Tube video mechanic's channels. Why is that? Why would you not put something on bolts or studs that helps out the next time you have to do maintenance work on equipment?? Blows my mind! Also, regrinding the teeth couldn't one find a company locally that can regrind them for you???
@murky2502 2 жыл бұрын
How are you holding the grinder up at that angle?
@tifttyson 4 жыл бұрын
I have the same stump grinder. Brandell, could you give me an idea of how often to grease the main bearing. Woodland Mills is not specific in their owner manual. Too much grease can be harmful for a close system. I have ground around dozen stumps. Some them 3 ft in diameter. I greased everything when assembled the unit and cautiously put a few shots of high temp grease in the main bearing. This all when the unit was new a few months ago.
@HamiltonvilleFarm 4 жыл бұрын
Good inputt. Thanks for watching and taking the time to comment 👍
@BigOrangeTractors 4 жыл бұрын
The bearing is just a pillow bearing, so any excess grease will be thrown out while in use. You can even see some of the grease trail on the disc in a few of the scenes. I've used mine exactly the same as you, with between 1-2 dozen stumps and several of them being 36"-60" in diameter. I think I've greased it maybe twice. I would worry much more about under-greasing than over-greasing. However, the nice thing is they are standard bearings available almost anywhere!
@tifttyson 4 жыл бұрын
Tinker Tractor Welder Mechanic that is very good to know. With all the grinding I have done with it I was concerned about it. I now know I can grease it periodically without fear of damaging it.
@BigOrangeTractors 4 жыл бұрын
@@tifttyson absolutely. With all the grinding I've done, I've probably still only put about 6-8 hours on it. I'd say 4-8 operational hours would be good, or just a squeeze or two every time you go to use it (if it's an infrequent use item). I usually grease my equipment after I finish using it, so it's ready for the next time.
@tifttyson 4 жыл бұрын
Tinker Tractor Welder Mechanic that is what I will do. Thanks again.
@chuckhortler2814 2 жыл бұрын
Have you sharpened any of the teeth? I just bought one of these and have already ground about 50 stumps ranging from hard wood to very soft/rotten pine stumps. Have only seen rock in one of the grinds and tried to be careful around it. That said, the teeth are not what they were when it started out (I bought 12 spares when I got the grinder so I can compare to those too). Woodland Mills indicates that these can be removed and re-sharpened... any idea how to go about that?
@HamiltonvilleFarm 2 жыл бұрын
this may help. kzfaq.info/get/bejne/acWknMt0t9CpoH0.html
@chuckhortler2814 2 жыл бұрын
@@HamiltonvilleFarm Thanks... it's a nice video about making a tool for tightening/removing the four vertical teeth. WM now includes a tool to do this with the unit. nothing about sharpening in that video or any in his channel. appreciate the pointer!
@HamiltonvilleFarm 2 жыл бұрын
Yeah sorry, I couldn’t remember. We made the video a long time ago
@mikekalinowsky6176 Жыл бұрын
If they last forever whats the point . I have to replace teeth all the time
@birdseyeviewfamily 4 жыл бұрын
Any tips on actually sharpening the teeth? We have the same stump grinder and the teeth are definitely due for a sharpening. Can’t find any tutorial videos for these specific teeth.
@HamiltonvilleFarm 4 жыл бұрын
Filing would be my bet. Maybe Brandell will see this comment and chime in. He knows that kind of stuff👍
@brandellfleming3225 4 жыл бұрын
I talked with woodland mills, and they said that you can sharpen them to some extent using a silicon carbide grinding wheel/disc. I would just say to make sure they are nice and true/flat when done grinding them.
@birdseyeviewfamily 4 жыл бұрын
Brandell Fleming Thanks!!!!
@chuckhortler2814 2 жыл бұрын
any further tips on this topic? (didn't see it before I posted a separate thread... Google sorts these by most popular so this one was buried).
@MySliceOfHeavenoutdoors 4 жыл бұрын
I expected it to be harder to change those teeth
@HamiltonvilleFarm 4 жыл бұрын
Yes sir...pretty easy. Thank you for watching Joey
@BigOrangeTractors 4 жыл бұрын
So did I, which is what I built the wrench in the first place. Better to be accurate, though, so I'm glad I built it, but glad it worked so easily, too.
@MikeDPlxztc 4 жыл бұрын
I'm surprised how few teeth are on the grinder if they doubled the amount of teeth wouldn't it cut better
@HamiltonvilleFarm 4 жыл бұрын
Maybe🤷🏻♂️ my assumption is the woodland Mills engineering team felt this was an optimal amount. Distance between teeth and orientation of teeth probably produce the desired output of shavings. More teeth may clog up the blade. Again, I'm guessing at this point. Thanks for the comment. Makes one think. 👍
@jeeperHK 11 ай бұрын
Great. Another WG24 video where no one read the user manual first. How helpful.😡
Hardy Brothers Outdoors
Рет қаралды 5 М.
Hamiltonville Farm
Рет қаралды 35 М.
Eater Straw Hat
Рет қаралды 26 МЛН
Quantum Tech HD
Рет қаралды 29 МЛН
Ăn Vặt Tuổi Thơ 2024
Рет қаралды 87 МЛН