I also like how you do the chapters in the videos.

Really hoping you get to test the CAT WB 718 and Ti. These are short (5.5") cans that weigh almost nothing. The weight for Titanium is 6.9 oz and for Inconel is 12.8 oz. These are supposed to be Hux back pressure low and have that deep low sound that competes with the best of them. I would love to see this silencer up against this Vent 3! THANK YOU for making this channel and doing the video's the way that you are. The community needed this!!

Keep cranking out the videos I didn’t realize the channel was so new. It seemed so well setup

Quickly becoming my favorite channel

Thank you again sir. Please Please please stay financially untethered to these companies so that your videos and opinions are honest base solely on the performance of the can. Thanks again bro

My biggest concern would be service life. Titanium baffles already don't last as long as stainless or inconel, and having the whole thing be 3D printed and porous seems like a good recipe for it to start eroding holes in itself in 3k rounds.

Congrats on the 100k. Well deserved, now to a million.

Great job and we really appreciate side-by-side comparisons. It's refreshing to see unbiased videos. Keep up the good work. I shot these PTR suppressors at a few events. Game changers.

This was such a great video! Can't wait to see you test even more of the claimed super quiet low backpressure suppressors. 3d printing has really taken the suppressor world by storm and we're seeing some really amazing things come out of it. Can't wait to see what the next video is!

Certified my form 4 on 5/2 for my first suppressor. It was a Vent 2, I can’t wait‼️

Congratulations on the 100k views, incredible that you've achieved this milestone so quickky. Great video! $1500 is going to be a pretty tough nut to crack especially right now when people just dont have the expendable income they did a few years back. Looking forward to you doing further testing using a decibel meter to see exactly how they stack up. Thanks again for another great video!

PTR and CAT, are the new kings of the suppressor world! I would definitely love to see these two go head to head! Fantastic, real world, non-bias review! Subscribed, and looking forward to much more!!!! I would like to see the PTR against the Mob from CAT

Great video and great information! Congratulations guys!

Impressive product and video. Keep up the good work.

Thank you for the video guys. Keep up the hard work.

THIS...THIS is what we are looking for! Real world reviews in real world scenarios. Don't get me wrong, i love Jay's (Pew Science) reviews, but range testing, comparisons & conversations during the test tossing the ball back & forth. EXCELLENT WORK fellas! Keep up the great work! Excited to see the channel explode into great & GREATER things! God bless sir!

Bro!!!! Congrats on the 100k!!

I've had the Vent 2 since March and it's awesome. Full auto rated and on my 9mm carbine it feels like home. Great review, you earned my sub so keep up the good work!

Awesome vid!! Seeing Kraken smile after he shot his round was priceless!! Much love to you allllll!

Awesome content! Thank you for the info

Great video yet again. I've shot the PTR products and each of the Vent suppressors and they are awesome. Also talked to Bill and his team at a view different events and they are the kind of people I like to support. Now, after seeing this video, I'm finally sold as well. I'll never invest in another can that isn't high flow again either.

I prefer these longer videos as the shorter ones. Not saying every video has to be long but I enjoy suppressor content so much that I do prefer the long versions lol! Awesome video Rob!

Love my nomad L and my osprey 9. The osprey sounds amazing on my scorpion. Keep these videos coming!!

I just bought this can for my AR yesterday. I cannot wait to pick it up and try it!

Great video! I had no clue about PTR before this.

Love this. Real world testing with side by side comparisons and no BS. I’ve been heavily considering the Vent 2 but I already have a bunch of 9mm cans. The Vent 3 was on my radar but now it’s at the top of my list.

Keep cranking vids out good quality ones

Snagged one of these PTR vent 3's last month, great can and worth the cost IMO. Awesome video and info as always!

Just got my RC3 and I’d love to see more videos including that!

Always blows my mind when companies have used car salesmen pitching their products.. almost turns me off from what in this case seems like a solid product.

Love the video 🤘

I will say this about this review; The guy from PTR actually mentioned CLR for cleaning. Where as CAT wants you to buy their proprietary CAT cleaning solution, for $150. Unless I'm mistaken, they are similar in the 3D design and both made of Titanium. I think that's pretty cool of PTR! As per your original question, I would have to say yes! Definitely worth it

Its actually quite nice when a company promises the moon and actually delivers. Well provided the Vent 1 for 7.62 is just as good, its going to get added to the "next purchase" list. EDIT: The sole thing that makes me not dead set is still unfortunately the price but to be fair im not a rich man either so $1500 to some people is alot but not crazy where I can barely justify that at this point.

Congrats on the 100 K subscriptions. Would love to see a review of the PTR vent 1 for those of us that have a 7.62 x 39 and a 5.56 rifle as well. Can it serve dual purpose for both rifles? Would also like to see if some of the 5.56 suppressors could do double duty on a 5.7 x 28 pistol. Just trying to see how we can get the most bang for our buck and what would the trade offs be for a multi-role suppressor. Loving the content and how this channel is growing!

Felt like I was watching an infomercial for a minute

Thanks again for the great videos. I like that you did subjective sound comparison, something I haven't noticed on your other videos. Unfortunately for me barrier into the suppressor world is cost. It would be great if you could test some lower cost options like the Aero Precision to see how well they measures up.

These videos are coming out with perfect timing. Just finished building my 11.5 sbr and highly vested in low back pressure suppressors for it. Keep up the good work. On a side note have you heard anything about the velos k?

Can't wait for the RD LS5 sound test video!

Pretty amazing results, especially for the size and weight. Just need the price to come down.

Great video!! I got to handle the Vents, and they are beautiful cans, but the price makes it a no-go for me. Which is a bummer because I like the vent 2 a lot.

Very tempting

Awesome video and my biggest factor is warranty and customer service. If a company gives customers a hard time, I’m out no matter how good their products are.

Good stuff

Would like to see a 9mm suppressor review! Specifically between the Mojave 9 and the new Maxim Defense MS-9!!!

Vent 3 vs RC3 people will be interested to find out. Durability ruggedness sound great video

....and here it is!.. This is the video I was waiting for. I'm glad to see it performed good and that is a feat within itself considering it's their first suppressor. This being said, I do have some reservations mainly since it's their first and we all know how common issues usually are on initial products. The other concern is on the proprietary PIP. Most know that Titanium does have some amazing properties but unfortunately its not the best in erosion, this said I wonder how this foam like, porous formed Ti would hold up to abusing cycles or FA schedules. This basic comparison does show a positive outlook on this newcomer but I'm just wondering on long term wear & warranty. Although Bill was a great salesman, we didn't get any warranty nor factory servicing information. In retrospect, price & performance I'll take the 7.62 FLOW Ti. Thank you for this initial review guys! Great job..👏 EDIT: I covered my opinions on the rifle cans. As mentioned, 9mm platforms don't usually suffer from back pressures, as gas operated intermediate cartridge platforms do. The inflated price of hi-tech 3-D printed, Ti LBP is an advantage, I don't think the costs measures to these advantages. it's hard to justify $1500 for a pistol cartridge tube, that does not blow the competition out of the water. For less than half the price, you have options with similar performance like the Omega 9K. Again... this is just my perspective.. 😉

I think you brought up a good video content. As someone who owns lots of suppressors, a cleaning vid would be good. Do you different techniques on different ones? What solutions work best? How to protect the finish so it goes in black the the day you bought, but comes out shiny polished? Let's see how you maintain your favorite Nomad 30.

Another video well done. I don't have the disposable income to purchase such a high end can, so I gotta stick with the blue collar cans from YHM and Griffin Armament.

After taxes and stamp you'll $1800+ PTR really pushing it on this one. Too many great cans in the 800-1000 range and amazing value cans at the 400-800 range. its only "Full-Auto Capable" while the 9mm rating shows what the cans real limits might look like "120 Rounds (full auto) - 10 Minute cool down 9MM" unless you're getting a less durable 9mm suppressor for the same price as their 556/762. Either way really enjoying your long format videos.

Revolutionary can. Mark your calendars. This thing will change things forever

Pew Science has only tested the Nomad-L on 308 bolt gun, not 5.56 on either barrel length. I'd be curious to see the Nomad's results for sure. But the sales rep was not entirely incorrect; the measurements gathered by Pew Science for the Vent3 on the 10.3" MK18 are quieter than even the CAT WB is on a 14.5", making it the quietest (least damaging) suppressor in the 556 test matrix thus far. As far as hearing damage risk comparison; Nomad-L on 20" 308 bolt gun is 21.3 points quieter at the shooter's ear and 9.4 points quieter overall than the Vent is on the 10.3" Mk18. Largely due to it being a bolt action and having the endcap further away from the shooter's head. But the Vent on a short barrel semi auto getting that close to a top performing bolt gun suppressor like the Nomad is very impressive. Cracking the 40 zone in muzzle suppression on the MK18 has yet to be done by any other suppressor. Makes me excited for the growth of the suppression industry. Pew Science has improved customer knowledge and created a better frame of reference to better quantify performance than simply decibel meters designed for steady state noise. This new frame of reference showcases the benefits of advanced technology, which created a market for people to consider buying advanced tech instead of the same old omega baffle ripoffs that we've been fed for years.

Really liking the channel. Do you have any Griffin cans to review? Seems they are left out of a lot of reviews.

Been looking at a Huxwurx 762Ti eagerly awaiting the 308 version of this to see a comparison.

Ptr vent vs the CAT would be a sweet video

Cool can. But wouldn’t pay the premium $$$

I wish you put a bore scope down these suppressors to see the design difference. Sure that isn’t a cross sectional view but at least it would be a neat data point.

Just a head up: I feel like this "foam 3d printed technology" is going to get copied almost immediately. Most 3d printed suppressors are made using DMLS (or other more expensive) 3d printers all costing in the $10s of thousands hence the reason I don't have any experience with that exact type of 3d printer but I do own several 3d printers both FDM and DLP (the 2 most common types which use plastic and UV cure resin respectively) and while they all use totally different technology the making of foam type stuff on FDM printers happens accidentally all the time and it can be programmed to do it they just almost never print metals because its better to do it with DMLS typically and most people don't even know you can print metal on FDM printers if you use a very special type of material and then sinter it aka throw it in a very powerful special high temp oven. DMLS 3d printers work way differently and basically have a bed of metal powder and a laser melts a design into that layer on the bed of powder then the machine pushes another layer on top of it and the process repeats over and over again until you have a mostly finished part then you do the sintering and post processing and all that. In other words I can think of a couple ways the "3d printed foam" could probably be done and I'm no expert so if the suppressor really is that good then you can bet other manufacturers are already working on copying it and testing different ways to do so and I don't think it's probably as hard to make or do as they make it seem. Also I feel like it could be done on a FDM 3d printer too in which case I'd know exactly how they do it and exactly why the cost is as high as it is because the type of FDM material you'd use is expensive as hell last time I checked and again with that type of printer it should be very easy to recreate they would just probably have to do even more post processing work than DMLS printed parts which its usually the other way around. Anyway its all complicated and props to them for the ingenuity and I hope they make some good money if it is that good but I wouldn't count on that being the only one to use that "technology" for very long and with competition comes price drops

Another great video, as for buying it, I may have to wait. I’m looking at the X2 Dev Group OrionX Suppressor which is slightly less expensive than the Vent suppressor. I have their rifle so I want that can on it. As for getting a decibel meter, I would seek out other KZfaq content creators that have one and maybe collaborate with them. So far everything you have done is great I truly appreciate what you are doing. 👍🏼👍🏼👍🏼

Honestly the car salesman turns me off a little more than the price point. Titanium isn't necessarily known for hard use either. All that being said it's always good to see another player in this space. I'm sure they'll provide more innovation as time passes.

There are SO DAMN MANY OPTIONS ! I've been looking and learning and still know nothing, I was hoping to have just one that can do 556 and 300BLK by changing mount and end cap . The 300BLK is the most difficult to tune in the back pressure for sub's I may have to have a dedicated can for that , which means I'd have to have two one for each. Death air sand man L, or Omega 36M , YHM 30 , HUXWRKS . Cost - sound - weight each are important.

Can't wait to see the full back pressure to decibel comparison video.

Definitely wish there was decibel readings for the suppressors here. Hopefully soon. Not saying you're biased to this suppressor with a ptr rep nearby, but its easy to question subjective hearing test without concrete numbers to show. Nothing against you or ptr, just like my numbers! Hope you're able to get ahold of some cat suppressors soon. I dont have many suppressors yet, but my odb is out of this world compared to what i do have.

You and @inrangeTV would get along well with the 'no gods, no masters' mentality with sponsorship.

I have a suggestion of two different videos. 1. Tough, durable go to war 556 can. 2. 556 can for no barrel length restriction. Check out Rugged and Maxim.

Yo is that an Archon Type B? Was not expecting to see that today! Do you have any interest in the gen 2, or are you satisfied with the gen 1?

Test out the cat cans ! Nice channel

I’ve spent over a thousand on two rifle cans. Fifteen hundred is a hard sell to any average person even if it’s a perfect suppressor.

Titanium foam sounds fun to clean, which is probably why it was not mentioned.

Velos is a hard use can. The vent is not purely by material construction. The Velos is the best all around 556 can I own for ARs with barrels 14.5 and under. Better than my RC2, turbo k, polonium k, etc. longer barrels I prefer the mini 2, polonium k, and other k cans for length and weight. I want to try the Velos k however

You should do a video on the KAC MCQ QDC PRT

I don’t know if this is the right place to ask about the ptr suppressors but I have the idea that it is a porous material since they said it is a titanium ‘foam’. Does that mean that some of the gases leave the suppressor through the sides as well? Does this allow the suppressor to vent/breath better because of this. One area of concern if this is true is if you were to paint over the suppressor would that cause issues?

I noticed in this video that on your 11.5" rifle you are adjusting a gas block through the rail with a bullet. What gas block are you using? I have been looking at the Riflespeed gas blocks, but my setup according to their configuration tool says none will work on my system. Like your rifle, my setup is the similar in no clearance after rail to muzzle device. Thanks for the help.

I enjoy the flow through cans and especially the 3d printed ones, but how does warranty work when there no way to really work on something like these?

I'm working on a 7.5 300 blackout. I'm a leftty like you are. I would like to know what suppressor is best to keep gas out of my face first, second good sound and low to no muzzle raise.? Thanks for your help and videos.

Any thoughts on overall toughness of these cans? If my rifle falls over and the middle of the can hits the corner of a bench on the way down, is the can going to snap in half? Or be unfazed? The Vent 3 looks awesome in how quiet it is. But, I can't help thinking it looks flimsy. Like it would break from staring at it too hard. A buddy of mine loves his Thunderbeast cans because he says they're quiet AND he can use them as a club if all else fails. I don't want to club people with my cans, but I also don't want something that will be destroyed in a minor mishap.

What do you think about the rugged razor 556 and the dead air Sierra 5 or the PWS BDE 556?

Also just to add theres a little misleading wording in the pew science rankings. It is the quietest at the muzzle but gets beat by 3 other cans at the ear. (not including the DSX since its on a tuned upper that nothing else has been tested on)

I do think it’s worth $1500 however it’s just too much for me to justify with so many other options out there. I’ll wait for a black Friday sale or just wait long enough for them to drop the price

A generous amount of blue loctite with proper torque is good enough for most use. Red loctite is a bit more secure, but neither is really meant for high temp.

Curious on how the Nomad LT compares as you are closer to that 11oz in weight.

U guys seems very knowledgeable and this is a great comparison video but, $1500? Why not promote any multitude of HUB interchangeable suppressors added with BCG designed to mitigate gases while using a suppressor like lantac. You spend less than $1,000 and then take the other $500 and buy ammo with and you're still better off

What happens when the porosity holes get clogged up with carbon and any unburnt powder? Does flow through and sound suffer?

Great channel. Buying? No I will not, not in this economy.

Obviously the rifle speed has adjuster is useful for the channel but for a rifle with a dedicated can, I’m assuming it would not be worth it? Or would you disagree?

I’m not sure if anyone else noticed, but the little blurb of the .30 cal can on and off a “G3” type rifle? The clip of the non suppressed ptr91 obviously had been manipulated. Anyone who has any experience knows that G3 type rifles throw brass like a morherfucker unsuppressed. The rifle in the video had brass flopping out.

I would like to know how hard you can push it. What's the cool down period per shot rate? Edit: What is the maximum recommended temperature for the suppressor AND What is the max firing rate to get to that temperature?

My real question is long term capability of the can given the purposefully induced porosity. Have you thought about getting a Flow 556 Ti?

Picked up a vent 3. It’s good, not sure it’s $1500 good. It is heavier than my other TI suppressors.

I was always told in past not to ultrasonic titanium that’s why I went with stainless,said would become brittle?

Ok. I’d bite for sound, weight, and flow though plus versatility. I’d consider a 30 cal or a 36 cal. Can’t give me most of what I want then I’ll buy dedicated for each platform.

.308 testing on a G3? Are you me? And I think the price is probably due to the manufacturing and R&D. Not 100% sure, but I don't think there's any other can on the market that uses that particular style of flow-through design so they probably spent a lot in testing to make it work as well as it does. But anyway, looks like I'm adding the Vent 3 to my wishlist with backpressure and sound performance like that. Just have to see Sig's SLX and Radical's 5.56 can now, and flash performance from all of them before I make my final call.

Did he drive up to your range in a flex seal boat too? :)

I would consider this can if I was in that price bracket.

silencer shop available again?.... link was removed and I was waiting for the in-stock notification :'|

❤🎉

should compare that vent 9mm to rugged r9, full config.

Can titanium stand up to inconel considering round count? No? Give me inconel...

👍👍👍👍

Is that the Joe Foss range just west of PHX?

You know its super exspensive so i havnt really decided yet. Depends on the tests.