PUK Welding device - Retipping a prong on an emerald ring / Krappe Schweißen
Рет қаралды 8,350
Күн бұрынThis one is a classic, a worn prong. In most cases is not worthwhile removing the stone from the setting, and then soldering the prong. With the PUK5, work is carried out directly next to the stone, by adding and welding in a gold wire of the same alloy, the prong is rebuilt. The slight dark discolouration that is visible on the stone is only soot; this can simply be wiped away after welding.
This method is a fast way to create a new, completely stable prong that will hold the stone securely.
Welder used / Verwendetes Schweißgerät: www.lampert.in...
Welding for goldsmiths and silversmiths: Ring welding
Schweißen für Gold- und Silberschmiede: Ring Schweißen
Get your own Lampert welder here: www.lampert.in...
For more information contact us via www.lampert.in...
#precisionwelding #jewellerydesign #schmuckherstellung #argongaswelding
@dudemcfood1 5 жыл бұрын
Maybe if they gave the settings used this video might be of some educational use.
@LampertWelding 3 жыл бұрын
Thanks, we will keep this in mind. Basically it is recommended to start with low settings for power and impulse time and to increase stepwise. More info about work projects including advices for settings can be found here: lampert.info/en/workshop-news
@rockgold73 2 жыл бұрын
How much it's cost?
Lampert Precision Welding
Рет қаралды 6 М.
Robinson Foundry
Рет қаралды 1,1 МЛН