Pulling eaton power divider. 355 rears. vibration

No video

Pulling eaton power divider. 355 rears. vibration

Рет қаралды 42,727

Skrapenpennies

Күн бұрын

rebuild eaton power divider, remove power divider, vibration semi truck vibration fast vibration

Пікірлер: 45

@endtimeawakening5557 Жыл бұрын

Great explanation on this Component. I'm amazed at how much torque these things can take, given the amount of weight that's being moved through the drive train. Thanks for sharing this repair. God bless!

@skrapenpennies9947 3 жыл бұрын

Vibration still there. Found the problem though, yoke nut on back of front rear was loose

@melindaortiz9741 2 жыл бұрын

@skrapenpennies9947 2 жыл бұрын

The front yoke started vibrating again so I put some washers into the through shaft where the power divider shaft slides into and now is tight

@DanielHernandez-cx3vh 2 жыл бұрын

I’m having that same vibration issue while letting the truck coast at one speed I feel a vibration going at 65 mph feels like a driveshaft issue have been to 4 shops and no1 can pinpoint it have had my driveshaft balanced, u joints are fine everything is in time yokes check and nuts are tight real difficult issue to pin point

@skrapenpennies9947 2 жыл бұрын

@@DanielHernandez-cx3vh sometimes it can be tires out of round. Normally they shake at two different speeds like 45 and 65

@skrapenpennies9947 2 жыл бұрын

I had a day cab classic I pulled all the axles out and ran the truck in high gears and got up under truck and I put my finger on drive shaft while it was turning and could feel it beating against my finger. I had another drive shaft made solved the problem. They are not that much to get made at power train. Usually the yokes on shaft are bad. I would put new u joints in and they would still move when I pushed on shaft

@Galen1959 2 жыл бұрын

Great videos! Love the big tru k videos

@user-mh6zq4hk2x 4 ай бұрын

I really appreciate you brother Great video & great camera work & explanation

@abcdefgWakaWaka 2 жыл бұрын

I think some of that movement you have when the yoke is off is fine.

@MrPHDtrucker Жыл бұрын

Curious to know if after a year later of fixing your part of iter if it's still working

@CFLDumpsters 2 ай бұрын

Good stuff, great video where did you get rebuild kit? I need to do mine

@skrapenpennies9947 2 ай бұрын

There's a place called power train nearby. They also build driveshafts

@jafarhon 2 жыл бұрын

red silicone is the winner here, get me the name of it, i got to get that for me, looks like it gets glued up pretty good

@skrapenpennies9947 2 жыл бұрын

It's permetex high heat. Never had a leak with it on anything

@edenfieldjared0 Жыл бұрын

did you have to use heat with the big gun and one inch socket?

@alfredrevis1876 Жыл бұрын

Is there a kit I can buy those washers mine is loose to? Thanks nice video.

@grebilorellana320 2 жыл бұрын

I got the same problem did you fixed the problem with the washer??

@skrapenpennies9947 2 жыл бұрын

I put a few washers inside the through shaft. It's working good.

@skrapenpennies9947 Жыл бұрын

It was the yoke on drive shaft causing the vibration

@patrickgunning478 Жыл бұрын

There's a shim pack at the input retainer no need for any extra washers

@terrellscaife2411 Жыл бұрын

So is that Ingersoll, rand 261 how is the power? to me, they seem extremely heavy I prefer the 2146Q1MAX

@billybobs841 9 ай бұрын

How did it do man ? Good video

@onebaldman4719 5 ай бұрын

Floor jack would of help loosen instead of banging the screw driver in

@skrapenpennies9947 5 ай бұрын

Great idea

@quyeno8819 Жыл бұрын

ok men

@lucasmonks5767 15 күн бұрын

My doses it down a hill wile slightly touching the throttle

@skrapenpennies9947 2 күн бұрын

Sounds like yoke on drive shaft or u joints. Unless the bearing on power divider loose. Most have shims you can take out to tighten bearing

@melindaortiz9741 2 жыл бұрын

Replace bronze bushing too

@johnkordish3546 2 ай бұрын

Should of not used a 12 point socket to take that off should of used a six point socket

@skrapenpennies9947 2 ай бұрын

Its the only one i had that would fit and it took me an hour to find that one😂😂

@johnysilver1853 Жыл бұрын

My truck has problem when I turn differential switch on I hear air does something but only one rear wheel spinning on passenger side. What can be the problem? What's need be checked or replaced?

@shubhamsaindane Жыл бұрын

Hey bro you check your truck axial spinning axial meaning and another axial I think your axial are dameg