As you were discussing working with Damien vs working alone I was reminded of Proverbs 27:17 "as iron sharpens iron, so one person sharpens another". Ya'll make a great team.
@austinsmith37496 күн бұрын
I cannot begin to explain how much I appreciate you explaining what you were doing. I’m probably one of the people you would think knows these things but what I don’t know is what you know and that’s over half of the reason I watch your episodes. thank you for continuing to deliver to us, so that we can learn from you and enjoy our craft even more
@danmcburney324725 күн бұрын
I love it when you do more explaining !!!!! I loved it when you were first doing flying lessons and realized you might need to dumb it down for us newer guy's 😁👍👍 you're the bomb August , Thank you ❤
@daveinky25 күн бұрын
Come for Rock, Paper, Scissors and stay for awesome tree work. Best wishes August and Damien ! 👍
@toddwilkinson62125 күн бұрын
So this is what all that stuff about pulleys and leverage in grade 8 science was about....
@Odhinn63825 күн бұрын
I think so.
@jamesdunn889325 күн бұрын
My teacher did not teach me this
@toddwilkinson62124 күн бұрын
We had a portable rig frame, with all sizes and types of pulleys, and ropes, various "block and tackle" type multiple stack pulleys. Even had a spring scale we could attach at various points to measure applied force with different combinations/configurations etc. It was quite extensive. Very useful and practical knowledge that has come in handy many, many times over the years. :-)
@litewatefitr25 күн бұрын
Love the editing of the loss of the shoot to Damien limbing his way up the trunk. You guys do good work. Love the channel
@VeteranTreeService23 күн бұрын
The editing of the fir put a big smile on my face. -- pom pom rope ends 😂 --
@douglasdonegan937225 күн бұрын
Thats crazy how that top is bent over with that rope pulley
@troyerthedestroyer25 күн бұрын
Down only jobs with awesome people like Damien are the best!
@opendstudio714125 күн бұрын
Tackling problems, blocking obstacles and pulling for a predictable execution. Good instruction and equipment demonstration.
@n085fs24 күн бұрын
"Using a throwline, Damien has got the..." *shows how high it is* I wanna see that throwline throw. That is incredibly high. I bought a fishing pole and a 6oz lead weight to throw, and I can only get up about 80 feet while I need 120. I'm considering assembling a potato cannon and using compressed air to launch the lead weight.
@AugustHunicke24 күн бұрын
Use the potato with a washer to keep the knot from going through the potato on acceleration.
@mattharris201825 күн бұрын
I really enjoyed that video. Thanks.
@carolgadles704525 күн бұрын
Amazing as always !!!!
@bobwiese612825 күн бұрын
Excellent Brother!! God Bless. 😊
@rhondasweeney727125 күн бұрын
Awesome job 👏 😊
@scatoutdebutter25 күн бұрын
Like somebody else said: Proverbs 27:17 ... interesting dynamics of thinking and talking feedback like that... even if the other guy isn't even saying anything. Great explanations... August has gotten better and better as a teacher... seems like increasing in maturity and wisdom as far as teaching...and looks like being more aware of the less experienced... sincere observation... no flatter intended, but beware, nevertheless: Proverbs 29:5! ... but keep up the good work. I've "retired" from tree work but my son has taken it up.... I'm going to send him this video. Best regards and wishes to you and Damien. Robert Wood
@timdelph904824 күн бұрын
That noodliness you mentioned when talking about whether or not you’d need to pull more on the back cut is legitimate. Cut a pine the other day in a real similar way. When I started my face with tension applied, it was still leaning back a little, but it was super eager to go without adding any more tension.
@richardf913724 күн бұрын
Nice Work!
@user-oz5ke3qt8n25 күн бұрын
I like this video August and Damien have a good day ( Ty Ron
@batmantiss25 күн бұрын
My fiddle blocks have saved me a LOT of time and climbing. Good shootin
@nickmiller67116 күн бұрын
We use that 5:1 system regularly out here in Colorado.
@tedanderson46325 күн бұрын
Hey August..... I found out the Colorado spruce trees send their branches out horizontal ... I should have said perpendicular to the trunk of the tree.... We have lots of those on the Washington State coastal area along with a lot of engelmann and setka spruce trees.... I noticed something about these Colorado trees the bark is real craggy and tough.... This one tree person we have here in town thought that he could almost climb the tree by hanging onto the bark..... I saw a Colorado spruce tree here in town that is barely 70 ft tall with a 1 ft diameter Branch along with others that are very large which is typical of that Colorado spruce and it has lots and lots of b r a n c h e s...... KZfaq is full of information about spruce trees. I was going to be a boat builder when I was in high school.... I remember how interesting my wood shop teacher made everything..... He used to be able to identify lots of different types of wood just by looking at the knots in a milled plank.... Violin makers for some reason like the Colorado spruce tree.
@batmantiss25 күн бұрын
If you went up to the idaho mountains where the snowpack is heavy, you'd see tall, skinny colorado spruce. They adapt to their environment really well
@jamesdunn889325 күн бұрын
I'm from Washington state too
@julianalderson393823 күн бұрын
Yer some very cool 5 to one kits out there. Hows the rope grab go never used one?
@richardmiller410425 күн бұрын
Out of interest how come you didnt climb it and break it down? Love the channel by the way. Very good information
@AugustHunicke25 күн бұрын
Because there was space to flop it.
@julianalderson393823 күн бұрын
Nice thing to say to damo' cheers
@Neighborhoodgo2guy24 күн бұрын
✊
@julianalderson393823 күн бұрын
Sorry infront cant remember but much esier to gain. Cheers nice job.
@InWithBothFeet25 күн бұрын
Nice vid! I'm sure europeans would say your bar was too long. 😆 I'm curious about what goes into the decision making concerning when to climb and chunk a leaner down vs pulling and doing a tricky fall with limited space.
@AugustHunicke25 күн бұрын
It’s all about if there’s space.
@pproh60824 күн бұрын
Love the educational explanation of the setup. I have to say though that I disagree with your assessment about how you got the tree to drift a bit at the very end by shaving more of the hinge wood on your cutting side. The tree went where you aimed it with the initial notch, perpendicular to the hinge. On you post fall stump view, we can clearly see the hinge had holding wood across it's entire length. That tells us the butt had to have stayed fully attached during the fall travel and had fallen on a line perpendicular to the hinge. The thinning of the hinge you did at the very end just decreased the resistance of the hinge as a whole and allowed the tree to commit to the pull/fall easier. The tree went where you aimed.
@AugustHunicke24 күн бұрын
Your keyhole view opinion has the sound of basic understanding but is simplistic, and underestimates the potential for steering a falling tree with hingey wood. The tree would have gone further to my left and not been perfect without my adjustment. You don’t learn the nuances of steering without putting the time in. I have steered falling trees to the right, and then back to the left, to get around canopies/obstacles, and all with hinge properties and drift provided by canopy and stem weight. There are several premises in your comment that are generally correct but not comprehensively correct. It’d be a good podcast or vid workshop subject.
@pproh60824 күн бұрын
@@AugustHunicke Appreciate you taking the time to reply. It would make for a great podcast convo. I know I'll be discussing this concept with the folks I work with.
@AugustHunicke23 күн бұрын
thanks, its a big but very interesting subject that deserves better coverage
@gs1100ed21 күн бұрын
Regarding that frayed rope end….Do you typically burn/melt the fibers in addition to taping a frayed rope end like that?
@AugustHunicke20 күн бұрын
Not usually
@benjaminwhiteley696825 күн бұрын
#getaugustto200k
@jamesdunn889325 күн бұрын
Hey August I have a question for you about people who watch the trees get cut down are you used to have people watch you cut? Or do you get nervous
@AugustHunicke25 күн бұрын
I prefer an audience.
@tedanderson46325 күн бұрын
@@jamesdunn8893 if I lived down by you and had some property just for entertainment purposes I would call that August crane truck out there find some trees that needed to be removed and watch that crane truck fly those tree sections out of there and set them down next to the chipper.... Doing stuff like that is so much fun..... talking to people and watching their reaction to what's going on. I think more people should call him and tell him that they want him there with the crane truck. You know if you got some questionable trees you call him and problem solved.... Right?...... Don't worry about when you're going to do it or how you're going to do it just start doing it then the when and the how will take care of themself.
@jamesdunn889325 күн бұрын
@@tedanderson463we have ceader trees lots of different trees
@br-dj2ti18 күн бұрын
That's exactly how I am I do like an audience feel like I can showcase my skills if that makes sense God bless you stay safe
@jakubhostinsky448225 күн бұрын
Hi August, what is the reason for the shackle ( 6:50 )? I would recommend to use stopper prussik instead, so it can be pretensioned and let go.
@AugustHunicke25 күн бұрын
Instead? The shackle is part of the unused prussic progress capture. It was unnecessary as mentioned in the vid.
@jakubhostinsky448225 күн бұрын
@@AugustHunicke I'd love to see it with the progress capture installed, maybe it is simplier than my setup.
Hate to be a part of the peanut gallery but I would also like to note that the higher your tie in the more leverage you have, but you have to go out far enough that you are pulling away instead of straight down. Not a critique just my 2 cents