I left a clue to one of my favourite tunes. Comment the Artist and Track. Will be giving away a monitor arm from autonomous. You can support the channel through Amazon> Noctua NT-H2: amzn.to/3Krf1qf Thanks a lot!
@vbuijten2 жыл бұрын
Summer of '69 by Bryan Adams
@koalamama2 Жыл бұрын
Solomon Grey, Interstate 695?
@JunkBondTrader2 жыл бұрын
yeah I;ve concluded it doesn't matter too much, just don't do anything too weird. The reason why it gets so much conversation is because we can't see our result, and it makes people wonder if they got it right so they start looking up how to ensure its done proper.
@BelaPuma Жыл бұрын
Hey, do you maybe know how much termal putty do you need for the whole gpu
@Prod.M00N Жыл бұрын
Not too much not too little, meaning medium peasized.
@SSJBen2 жыл бұрын
Been building computers for 20 years, have used about every thermal paste and method under the sun. It doesn't matter what you do, as long as there's paste. End of story. What, you expected a 200 word essay?
@TechIlliterate2 жыл бұрын
😅
@RambleOn072 жыл бұрын
But how can I irrationally dunk on people with this?
@Engeryu2 жыл бұрын
what does it means a "method under the sun ?"
@RambleOn072 жыл бұрын
@@Engeryu anything that people on earth have done.
@Engeryu2 жыл бұрын
@@RambleOn07 Aaah okay thx not english native so i understood that was an expression, but what does that meant ^^'
@fnglert2 жыл бұрын
I know I'm late to the video but what you did wrong here was let Aloy run around in circles in an arctic environment. To really stress your CPU, have her run around in a desert. After all, the arctic is colder than the desert, it's easy to keep a cpu cold in the arctic. For those who can't read between the lines, this is a joke.
@auntiepha83432 жыл бұрын
Thermal paste that is dried on the sides of the socket will not insulate any heat. That is easily debunked. The heat transfer occurs from the cooler touching the top of the CPU and dissipating the heat thru the cooler itself. Insulating the sides of the CPU socket thermal paste will not affect the cooler performance in any way, Thermal dynamics.
@user-jn9dl9px6r2 жыл бұрын
Genius.
@timm75242 жыл бұрын
Great video. I'd argue it *does* make an argument for not going total ham with the paste, but not for thermal reasons. That suction in removing it later could be awful. I'd guess that bubble in the middle of the final test wasn't there while running, but purely from the suction force trying to get the dang thing back off.
@main_rouge2 жыл бұрын
I remember once ripping my CPU from the motherboard with it still stuck to the cooler, in the end nothing was damaged but that certainly gave me a good scare. I've been really careful not using too much paste ever since.
@Karzipp2 жыл бұрын
just happened to me today with the preapplied paste :P
@406Steven2 жыл бұрын
After doing that to an original Pentium and pulling one of the pins out I started pre-heating my chips before removing the cooler. Go stress test it for 5 minutes to build up heat, shut it down, then twist it back and forth to break the bond before lifting it off.
@lol_05.762 жыл бұрын
@@406Steven Copy that, 10-4...good tip, for sure!
@narancs52 жыл бұрын
"normal-people insane" is a great term
@ruxandy2 жыл бұрын
Yep, pretty much what every sane person expected. Nice video! Thermal paste or other variants like thermal glue, thermal silicone (or solder in recent years) which typically spills on the sides of the actual die has basically been present on any CPU that has had a factory heatspreader in the past 25+ years. Never has this been a problem, so why would it be for the contact between the heatspreader and cooler heatsink? 🙂
@gernhartreinholzen39922 жыл бұрын
LTT already tested this extensively. They found no difference between a normal amount and a RIDICULOUS amount of thermal paste. Only too little paste made worse results. So always use a little more than just enough instead of a bit too little.
@TechIlliterate2 жыл бұрын
People still leaving my comments on the daily claiming the contrary smh...
@Twistedstar03209 ай бұрын
I loved this playlist, with a $3,500 PC sitting here in parts waiting for me to build it, this was excellent information.
@kicsiduda2 жыл бұрын
You did the tests we didnt dare to. Thank you
@kyzercube Жыл бұрын
The Spread Method has always been the way I apply my thermal paste and I don't even ad a dimple in the middle for " good measure ". I use AS5 paste though and this paste is much darker and thicker than most pastes so it's easier to judge the evenness of the spread than other pastes. I also use a paper based business card so I can fold it in half for extra space to get into the cpu area without having to remove stuff and it works perfectly every time.
@auntiepha83432 жыл бұрын
Finally a KZfaq video that found a use for those gigantic thermal paste syringes 😃
@gustavosifuentes2922 жыл бұрын
if you think this is too much, you haven't seen gamers nexus video on thermal paste
@delusional-ibra Жыл бұрын
@@gustavosifuentes292 lmao that amount of paste going to fill my bathub
@auntiepha8343 Жыл бұрын
@Ms Moon Boo 👍😁
@weirdodude11732 жыл бұрын
I've had a heatsink glue itself on there when I used too much paste before, and I ripped the CPU out of the socket. Luckily I was able to still use it, but what a scare! Thumbs up for the video.
@Rocky1138 Жыл бұрын
I've done this and since changed my method to warm the heat sink with a heat gun before trying to take it off using gloves. The heat makes the paste pliable.
@chieftron2 жыл бұрын
The biggest thing that was not included in this test, your ambient temperatures. That is the most important thing during these kinds of tests. This tests really means nothing without ambient temps included.
@TechIlliterate2 жыл бұрын
I do my best to keep ambient static and record it in my tests. Though I will start adding it in my videos. Thank you.
@chieftron2 жыл бұрын
@@TechIlliterate I will say this was the first video I watched of yours, not even sure why it was recommended, but, I will say I did browse your channel afterwards and I do like your content so I hope you don't take offense to my comment. However, it will validate your experiments much more when including ambient temps. I wish you continued success with your channel !
@afroteddybear2 жыл бұрын
The job of thermal paste is to ensure consistent and even contact between heat sink and heat source. The assumption is that too much paste adds excess conductive material, crippling conduction. This is a fallacy, because the distance between heat source and heat sink remains consistent, therefore, the volume and mass of thermal compound will remain the same. Too little thermal compound reduces the surface area of contact between the two surfaces, thus reducing conduction. Spreading the thermal compound across the heat source ensures *close to optimum* surface area contact between the two surfaces, hence, better conduction. This is all assuming best case scenarios; nothing is ever at best case.
@MrSmitheroons2 жыл бұрын
A really fun video to watch. I can see that too much paste is not an issue. (With a nice cooler with good firm and even pressure, and a nice, broad and flat AMD IHS). On the other hand, I can remember to just have an upper limit to how much "too much" paste I am willing to deal with, and then I'll be fine. Thie leaves a LOT OF ROOM to do it right. Anxiety brain calmed. Thanks.
@JunkBondTrader2 жыл бұрын
Only if using non conductive paste. Conductive thermal paste, if you use too much, the excess can drip down onto your MOBO, and cause it to short circuit.
@ussenterncc1701e Жыл бұрын
I replaced the stock AMD wraith stealth cooler which came with my Ryzen 5 5600, the new cooler was a Raijintek Orcus 240 liquid cooler. After watching a bunch of videos on this channel, I concluded that it wouldn't even be necessary to clean my old thermal paste off. It was only 6 months old, wasn't dried, and came preapplied to the cooler so I trusted it had sufficient coverage. I added all the paste that came with the new cooler and just slapped it on. I did have some thermal paste on hand to do a clean reinstall if necessary. I tested before and after, room at 20°C, maxed CPU with Prime95 10 minute runs, neither setup thermal throttled. Stock setup plateaued at 89°C, new cooler 60°C. I even let the new setup run Prime95 for 30 minutes, did not exceed 60°C. So, yeah, thermal paste is not the big deal it's often made out to be. All the testing I've seen on this channel was very helpful. Just thought I'd share my experience for anyone else going down a similar rabbit hole.
@ItsLadyJadey2 жыл бұрын
So... I found out the hard way what happens when you use too much paste over the LONG term. When I went to pull my Wraith cooler off of my 2700x so I could put in my new 5600x, the cooler took the whole CPU with it. Ripped it straight out of locked position on the board. I had to use the side of a plastic knife to pry and pull and finally pop the CPU off of the cooler. (It wasn't damaged and due to my dumb self forgetting to update my BIOS I actually had to put the 2700x back in to do the update) The combination of the grooves in the wraith cooler and the fact I used too much paste, causing it to spill over the side, over time the paste turned into kind of a cement-y consistency. It literally cemented my CPU to my cooler. That being said, the entire time I used it with that much paste, even towards the end of changing the CPU, my Temps never changed to anything concerning, maintaining my expectations while using an air cooler.
@Appalling682 жыл бұрын
LOL! I like your style, dude. Well done!
@TechIlliterate2 жыл бұрын
Hey, thanks!
@Gooner3333333332 жыл бұрын
So basically the temperature differences could have been down to the room temperature changing. Which shows, that in the short term, there's no difference between too little and too much
@vincent672392 жыл бұрын
Hell, it could have even been down to a fart
@jasonsong86 Жыл бұрын
Personally I like to use the spread method so I can make sure it's all covered and I am not using too much.
@chronicalcultivation2 жыл бұрын
I left a comment on your paste comparison video where I mentioned the Thermalright coolers and the paste included with them. Thermalright makes an AM4 bracket that makes removing the cooler without ripping out the CPU much easier. Luckily I know how to straighten pins safely or that glued cpu issue you had would have destroyed at least 4 of my Ryzen Unfortunately it's not cross compatible with all coolers.
@jackc86212 жыл бұрын
Criminally underrated channel
@TechIlliterate2 жыл бұрын
Thank you 🙏
@JunkBondTrader2 жыл бұрын
If you use conductive paste, and it gets on your mobo, it will short cirtcuit. Too much paste isn't a problem only if using non conductive paste. With conductive paste you need to be very careful not adding too much.
@colt5189 Жыл бұрын
I've always done the spread method. But seeing your other video of maybe there being an air bubble. I'll continue with the spread a thin layer. But then put a tiny dot in the middle. That way there is 100% coverage without a bunch of spill over.
@little_forest Жыл бұрын
In the end, it is very basic thermodynamics, that covers the topic on the theoretical side. And that might give some context for your data and the assumption that too much is bad. The transferred power of heat goes linear with the thickness, the contact area, the temperature difference and some coefficient. So the "two much" probably refers to the thickness, double the thickness means half of the heat is conducted. But the thickness is barely determined by the amount (volume) of paste you apply but rather the consistency and the pressure. So yes, too much paste meaning a too thick layer will decrease heat transfer. No, the amount paste you put on will not change (much) the thickness of the layer. Also, half the area means half heat is transferred, at least via the paste. So even where there is too little paste and not the entire chip is covered, there is definitely less heat going through the paste. However, the area where there is no paste, there is not no heat transfer, just less. Your data showed that very nicely. The time plots of the temperatures would have been nice, also because I am very sure that the data noise would have shown very clearly, that the temperatures are all within the margin of error except probably the too little one. Also I think the rise of temperatures is the more sensitive property that shows any tiny difference of heat transfer. But that of course does not change the result that the amount of paste has barely any effect on the heat transfer.
@wag1492 Жыл бұрын
Thermal paste is something people with too much free time think about
@OfficialNakatsuMegami2 жыл бұрын
I have manually spread TIM for over 30 years to know I have full coverage, without all of the guessing, it 100% removes the guess factor if enough was applied. Never had an issue, and with AMD using Chiplets and I/O dies, 100% coverage is mandatory for all CCX's to be covered. The tiny Pea is only used for outdated Monolithic dies.
@Xorthis Жыл бұрын
Nice, the more info like this out there the better. People think thermal paste application is an artform. It's not. Application of paste is simply binary, just like CPUs. 1) You don't have enough. 2) You have enough. That's it. Do what you want to get it on there. A pea, an x, spread like butter, spread like jam, portrait of the Mona Lisa, at the end of the day either you put enough on, or you didn't.
@SlavomirDanas Жыл бұрын
BASS LINE, you got me there...
@406Steven2 жыл бұрын
The too little definitely wasn't making good enough contact, those few degrees aren't going to hurt anything but definitely worth doing a normal pea-sized drop. The rest of the tests I'd be curious about room temperature and overall margin of error, very interesting to see that they all perform roughly similar. I've been an Arctic Silver 5 fan for a long time so I've been careful not to over apply due to its conductive nature but good to know that if I get a little heavy-handed it's just going to squeeze the extra out the side.
@renewagain6956 Жыл бұрын
"Squeeze the extra out the side " ... That's what she said. (This was posted on Valentine's Day)
@406Steven Жыл бұрын
@@renewagain6956 Well played 👌
@eternialogic Жыл бұрын
thermal paste has a lower heat coefficient, so the saying 'less is best' is there. You sprinkle a small dot in the middle and really wiggle that cooler around, but you should eventually see the bare metal of the bottom metal plate. The point of the paste is to fill in the gaps between the metals, not become the entire gap between the metals. Maybe if you used 'liquid' metal like in the PS5 it would be better, but that is a very difficult method to replace since liquid metal can instantly ruin your motherboard. I can guess how many PS5s have been ruined due to liquid metals alloys (if you ever used mercury, NEVER do that! Instantly turns aluminum into crumbly dust)
@isellfreemoney9899 Жыл бұрын
another issue with liquid metal is that it eats aluminum. so the IHS of the processor would get ruined by it
@criznittle9682 жыл бұрын
I want to see just pure thermal paste as the cooler - as much paste as you can pile up
@CrusinVK7 ай бұрын
great video. 'normal people insane' HAHAHA love that phrase. I'll stick to my spread method... worked fine for 25years of building my own PC's. great channel. keep up the awesome work. got a feeling you'll bmake a video that'll blow up YT any day now.
@niklaskras5498 Жыл бұрын
So the result is: mounting methode is key. Buy cooler which does the best job at screwing it down with the perfect amount of pressure. Another test would be: just put the cooler on. No pressure. Just a bit of pressure. Screw it down like the company intended. Because too much paste+not enough pressure will such hard.
@TheProvokedPrawn2 жыл бұрын
Good job. 🤣
@andrewkincare1916 Жыл бұрын
This is helpful, thanks!
@Narkiukas Жыл бұрын
Just watched your few related videos. And finaly some one smashed this fully! I'm Gonna draw N letter (as my firts initial) in area of half of the size the chip, in the middle and this why I leave my spirit to work on magic numbers :)) Thanks
@sithounetsith98772 жыл бұрын
I apply thermal paste with my fingers, it is just a bit stainy , but overall no difference with applying it with a plastic flat tool.
@ogrejd Жыл бұрын
@8:00 - Nasty not being able to get the cooler off like that. Motherboard manufacturers really should make the CPU release lever longer for situations like that so that you can just pull the whole thing out and pry them apart with a chisel or whatever. :)
@user--PM2 жыл бұрын
too much thermal paste being a problem is only valid if your paste is electrically conductive and it gets into places it shouldn't, shorting out things on your pc is bad, but non-conductive pastes aren't an issue if you put too much on there. one point of testing you could have done, no thermal paste at all, that may have crashed on cinabench or maybe thermal throttled, and of course higher temps, i wouldn't be too worried about it causing permanent damage, cause the cpu will throttle to save its self if it gets too hot and even shut down if way to hot.
@eugenek11802 жыл бұрын
Excellent work!
@perochialjoe Жыл бұрын
How many of these videos need to be made before people finally shut the hell up about "too much" thermal paste
@doctor_who12 жыл бұрын
you know, there is something under the lid that transfers heat between the actual CPU and the CPU lid. no amount of paste is going to cure if you have defective thermal transfer between chip and lid. which might explain your results.
@TechIlliterate2 жыл бұрын
Doubtful. I have had similar experiences with other AMD and Intel chips.
@helloken Жыл бұрын
That was some Confucius wisdom on that final quote there
@مقارناتالجيوش2 жыл бұрын
normal amount is good for me
@RichardGQue Жыл бұрын
Thermal paste has a shelf life, if you're someone who isn't going to use it it's irrelivant how much you're saving to throw away later.
@momomunsta88872 жыл бұрын
Have been looking for a video of just this test, thanks you! Also you present your data in a good clear way.
@greenbow78882 жыл бұрын
I always used the 'buttered toast' method. (Yeah I know it sounds like hindsight is a wonderful science. However it always felt like common sense.) There is one thing to add, which is that I paste the CPU when it's out of the socket. .. Noted you having difficulty spreading with it in the socket.
@worldwide78128 Жыл бұрын
This causes air bubbles unless you add a pea on top of the butter
@greenbow7888 Жыл бұрын
@@worldwide78128 Since it offers the best thermal results, I doubt it.
@colinscutt5104 Жыл бұрын
20 or so years ago too much paste could and did cause overheats , i think nowdays the heatsink securing hardware is tighter and more even so it tends to squeeze excess out more reliably
@doc7000 Жыл бұрын
I think because the paste gets pushed out, as long as you have enough pressure on the cooler then it should be fine is my prediction.
@danyf3116 Жыл бұрын
Best way to clean thermal paste is using Brake cleaner.Runs off and leaves no residue behind and not hard on electronics. Been doing so since 1979.
@elham74592 жыл бұрын
9:03 Okay, okay... I think it's colorful :)
@bobking7347 Жыл бұрын
The only time it'll really be an issue is if you use a paste that is electrically conductive and capacitive like artic silver 5, or other metal based pastes, with artic silver 5's "silver" particles inside which can short out other components on the board from spilling over too much, the other issue is dust attraction, dust eventually can begin to act like an electrical conductor not just a thermal insulator, electrical conductivity in varying degrees depending especially on it's composition, which is purely environmental, when it squishes out the sides of under the cooler, it can build up dust around the base of the CPU's ihs heat spreader or further and potentially form dust bunnies over time, really it's not a bad thing to put a decent thin foam airtake inlet filter on the case to help keep things clean. Artic Coolings mx6 carbon based thermal paste is a great choice as it is non electrically conductive or capacitive.
@TheGreatSeraphim2 жыл бұрын
Another tuber already proved that paste conductivity has a negligible increase from no paste at all. Your own video also showed this though you're baseline was not a correct baseline. A correct baseline would have been no paste.
@TechIlliterate2 жыл бұрын
That's a good point. I did make a video where I tried no paste. the difference was something but not deadly at all.
@Ittiz2 жыл бұрын
I think all those numbers are statistically insignificant.
@mafi9782 жыл бұрын
so it doesn't matter at all.
@TRXST.ISSUES2 жыл бұрын
Great video
@mikepxg6406 Жыл бұрын
I think my M1 Mac Mini is always cool always quiet. 😄
@wngimageanddesign9546 Жыл бұрын
Tests must have a system which can't go into thermal throttling. All clock and voltages must be fixed in BIOS and OS. And the test runs need to be done of a length of time for heat soaking, and you must eliminate variables like ambient temp and water cooling coolant temp. A short test run may be only showing the initial heat up of the die and is heatsinked off by the IHS. Personally I only use the spread method, for a complete coverage and the thinnest layer possible, as ALL thermal paste is an insulator compared to the two metal interfaces' coefficient of heat.
@jiali5598 Жыл бұрын
The thickness of the pastes is inverse proportional to the weight you put on top. The ideal case is to apply while the CPU is hot (lower surface tension, thus making the paste escape easier) and apply as much weight as the motherboard can support.
@lukejpittman Жыл бұрын
Bro are you the leader singer of Small Town Titans? I honestly can't tell. Great vid.
@nicekeyboardalan6972 Жыл бұрын
I think the point of less=better is the fact of the next time you won't have to clean off so much paste i hate touching old thermal goop that stuff will not stay off of ur fingers or your clothes lol
@skivvywaver3 ай бұрын
I have tried several different methods and the one that works the best is to make sure you get some between the heatsink and the CPU. I just squeeze out a fat pea sized blob in the center and mount the heatsink. I intentionally add what I think is a little too much. I've got lots of 91% alcohol and paper towels if I accidentally make a mess. I used to fuss over stuff like this and actually since socket A it really hasn't mattered.
@AzulaisQueen74310 ай бұрын
I think it doesn't matter as long you have a full application
@pjstartv67982 жыл бұрын
Your cooler and the number of heat pipes is going to have more of an effect on temperature than your application of thermal paste.
@treyu Жыл бұрын
I once applied too much thermal paste, it drowned my cpu, had to remove it and clean it with an extra thin needle because some paste went inside the slot lol. Si yeah, too much paste can kill it. Anyway, great vid.
@vladislavkaras491 Жыл бұрын
Thanks for the video!
@aikafuwa71778 ай бұрын
How well are you controlling the ambient temperature? The small deltas are too small to discern from ambient variances.
@ANTHONY-rp3ud Жыл бұрын
Too much paste, to little paste, It's actually making me crazy I did my PC And I put a good amount of paste on it, My CPU temperature is Under 60 Celsius At all times I'll just see how it goes if there are issues I'll just do it over it's very easy to do thanks for the video
@tandlose2 жыл бұрын
I've been wondering if thermal paste goes bad while in its container. For instance is it worth buying 10g thermal paste and use for the next couple of years or is it better to buy it when you need it.
@no1baggiefan2 жыл бұрын
Ive got a syringe of arctic silver, 50g, Ive had it over 12 years, its still good stuff imo.
@TechIlliterate2 жыл бұрын
@@no1baggiefan I would agree. Most will keep for many years. Though some are apt to separating.
@sscultima2 жыл бұрын
i had a tube of of the larger arctic silver5 for 10 years, mine dried out but it had only enough for maybe 2 applications left in it
@futuristicentity24172 жыл бұрын
I think it depends on the CPU cooler honestly I hear liquid cooling is superior I might try it....
@AhmedDeedatPalestine2 жыл бұрын
I think the cpu is holding the temperature at that same point by reducing clocks or something no matter the amount of thermal paste. I think benchmarks could give you more accurate results.
@tyson68572 жыл бұрын
This is actually a very interesting theory and would be interesting to explore in a video!
@themonsterunderyourbed9408 Жыл бұрын
I guess you missed the part where he ran cinebench?
@CaptainVKanth2 жыл бұрын
Thank you, I'll just stick with my stock thermal paste provided by BeQuiet Dark Rock Pro4 on my 5950x.
@Stratos1988 Жыл бұрын
Not the first video of this type, but informative and conclusion is the same. I think it way LTT testing amount of paste on CPU and Jayz2cents, when messing about with some gpu where he covered die and area around it within those metal brackets. Card was fine.
@sjoervanderploeg4340 Жыл бұрын
You should run a repeatable full load test like stress(-ng) or prime95. But then, if you put too much paste on... the IHS and the block will squeeze it out anyway!
@nicholas22752 жыл бұрын
heat will pick up later as the paste dries out when there is too much, when it's fresh it squirts out the side and works somewhat normally
@redoksaltar7226 Жыл бұрын
thanks alot for good test
@fortuneteller26392 жыл бұрын
By applying "way too much thermal paste" you also ensure that the motherboard around the fan is also cooler because it overspills. Motherboard is fine to be a bit flooded around a fan
@vinniethefinger7781 Жыл бұрын
Peanut butter had about the same result. Choosy mothers choose Jiff.
@69mutulica Жыл бұрын
Hello. What settings do you have your ryzen 5900x running at? I have the same cpu and a negative curse of -15 and I have higher temps than you. I have corsair h115i pro for cooling. Just curious about your pbo settings. Thanks.
@beardedbarnstormer9577 Жыл бұрын
Amount of paste was never about thermals. It was about clean up and removing of heatsinks. Been that way forever in the server world
@aarkmish80872 жыл бұрын
I have some other question. Is using laptop on a flat surface enough or do I need a stand? (like I play games only occasionally, mostly I just use laptop to multi-task browsing, writing, music, streaming & watching videos).
@TechIlliterate2 жыл бұрын
They usually come with tine feet to get enough airflow but if you want better cooling, and thus better performance even by a little, getting a stand with fans will do great.
@theclaybeartravels3596 Жыл бұрын
What a lot of people fail to know, is the CPU isn't the same size as the lid. The CPU is only the size of your thumbnail in the center of that lid; hence you only need a little dot of paste in the center.
@kilroy9872 жыл бұрын
Would it be simpler to say in the title whether or not it is, then people can watch to see what happens?
@TechIlliterate2 жыл бұрын
Yeah maybe I'll try that approach.
@marcellinokosagi76002 жыл бұрын
I applied too much thermal paste on my CPU, but the pc is working fine and there's a noticeable fps boost on the games that i play. unfortunately this also makes the heatsink stuck to the CPU. Should i just let it be and try to take it off when i want to reapply the thermal paste again sometimes in the future?
@main_rouge2 жыл бұрын
the longer you wait the harder it will dry and get more and more difficult to remove so you might not want to wait too much
@ewwwt2 жыл бұрын
I think I'll alternate between the X and the buttered toast with the dot in the middle. XP #IAreNoob
@LivelysReport Жыл бұрын
I think it matters little so long as there is adequate coverage on the cpu.. but I think if you want to best spread on a cpu, I would go with spread and small pea..
@ruthmoreton6975 Жыл бұрын
For CPU grinding try X4 Foundations with the expansions. That game made my PC thermal throttle on a stock cooler. ( i7-7700 )
@odkrywca Жыл бұрын
You should add to test one try without paste.
@papp10012 жыл бұрын
I'm not sure. I'm no expert.
@Overonator Жыл бұрын
How did you control for ambient temperature?
@LaurentiusTriarius2 жыл бұрын
Copper foil, like multiple layers pressed in sandwich. Wonder what that would do... "Searching on ebay for copper foil" 🤔
@ruthmoreton6975 Жыл бұрын
I have just commented on another video involving paste and I reiterate my previous comment. It's hard to screw this up. However - Have you ever tested with NO thermal paste? Perhaps that should have been a benchmark?
@f1jones544 Жыл бұрын
He has done that. He referenced it in this video and I think he said it made little difference.
@jeffreylebowski4927 Жыл бұрын
Hey just one question, were your fans working at a constant rpm through out these tests or were they throtteling up and down to keep a constant temperature?
@enveloreal Жыл бұрын
fans at a constant 50% - 2:06
@totheknee2 жыл бұрын
Do another test with a 1 mm thick of paste, but _don't_ tighten the bolts. Just let the CPU float on the paste.
@pointyfox2 жыл бұрын
It will perform worse the thicker it is. The thermal conductivity of aluminum is like 8-10x that of the most conductive thermal paste. Copper is like 40x. The reason for the thermal paste is that it is more conductive than air, which you'll most likely have between the cooler and cpu at a microscopic level. The thicker it is the more insulating it is compared to just a thin layer to remove the air. Going thicker with the application doesn't really matter since tightening the cooler down will squeeze out most of the excess. Though more thermally conductive pastes tend to be more electrically conductive as well due to the addition of metal particles, which could potentially damage electronics should it squeeze out where it's not supposed to be.