Note that O-rings can be replaced with matching Viton rings however sourced. When I get a rebuild kit I measure OD, ID and thickness which lets you cross check to ensure you use a correct replacement.

Great video lots of good pointers and no editing of video way to go sir

They are excellent torches (I have at least three of them) and well worth fixing with a seal kit. The Oxweld/Purox/Linde/L-tec/ESAB torches are proven since the earliest days of OA welding and have great ergonomics. I prefer them to my Victors and rate them even with Smith. Seal Seat (also an old company) sell parts and have a downloadable catalog. Torches, tips and parts are plentiful on Ebay. Those not wanting to tackle the work can have their local welding supply send their torch or regulator off for rebuilding.

The oxygen goes down the center and comes out the center hole it's what blows the molten metal out when you hit the cutting lever, great video though I need to rebuild mine to that's how I found this video tks. Big help.

I am in the process of rebuilding a purox cw-202, I am stuck at removing the oxygen cutting lever valve, I removed the front plate with three holds in it and cant figger out how to get the rest out , in your video yours was out. Is there a trick any help would be greatly appreciated.Thanks

You have an extra o-ring because you re-installed the old one. Watch your video and you will see it was right after you found that o-ring hiding in the ziplock baggy.😂

Arkansas Torch Repair does good work, not sure if they sell rebuild kits

Thank you for posting this video! For I too need to rebuild my old torches: a Oxweld; Linde W-200. I like many cannot find the parts, / rebuild kits. No where on eBay, amazon etc.! Please share with us where you found yours, if not the name, perhaps they web site or type of business.

where can I find these o-ring sets and what are the part numbers for them, for the Purox w-201 and cw-202.

I have the W201 with the #30 bent tip

Just picked up a Purox W-200 at a flea market and I'm going to be going through a similar process. Have you fired yours up?

Next video - use more intense lighting so we can actually see what you are doing.