PUSHING THE LIMITS... 1/16 RC speedruns and CRASHES😱

Рет қаралды 16,841

Күн бұрын

When your RC does not want to go fast it will tell you!
I was hoping to push my CRAZY HBX 16889 build to at least 130kph on 4s but it had different ideas, it wanted to fly🤣
Bit of modding to do!
BUT, I also took the JJRC Q117 brushless truggy with the stock system, run it on 3s and OOOH YEAH we beat the 82kph I previously got with the 2847 4000kv motor and the stock "2s" 35a esc combo didn't blow up😃
HBX 16889 speedrun collaboration
• HBX 16889 Team Speedru...
JJRC: • JJRC
HBX 16889 build
Surpass Hobby 2845 5900kv motor
m.aliexpress.c...
Hobbywing WP-SC8 120A 4s esc
m.aliexpress.c...
21t pinion gear
www.ebay.com.a...
Ovonic 1300mAh 100c 4s lipo
www.ovonicshop...
HBX 12056 wheels
www.ebay.com.a...
Music made on the GroovePad phone app.
All editing done on my phone using the Kinemaster phone app.
Contact -
Email
saulaldridge@yahoo.com
Facebook
/ rc-crazy-110316407770980

Пікірлер: 160

@kjetilpedersen583 3 ай бұрын

🙏 Thanks for sharing this.Yes 106 is nice speed for the cars

@rccrazy 3 ай бұрын

You are very welcome and thank you for watching👍 Very happy getting over 100kph😁

@tahayt6142 Жыл бұрын

Great video bro thanks for the testing mine is on the way I'm surprised it handled it at 100c as well esc didn't burn that little thing is a beast hope to see more vids on it soon

@rccrazy Жыл бұрын

Thanks and you are welcome👍 Yes I was surprised it done so well without any issues, plenty fast for the size aswell😅 I'm waiting on some new diffs then I will do some mods and speedrun it again, stock motor on 4s first I think😁

@tahayt6142 Жыл бұрын

@@rccrazy broo imagine if it can actually take 4s that's just gonna put arrma to shame😂

@rccrazy Жыл бұрын

Motor should be good just hopefully it keeps its stability on 4s, think we may need some more appropriate wheels😆

@armandopace6113 Жыл бұрын

Insane trying to get these little beast's to fly and they are flying ✈. They need wings 🤪🤣🤣 great video mate 👍🦘🏁🤣🤣

@rccrazy Жыл бұрын

HBX wants to fly without wings🤣 It is definitely fun trying to get small cars to go really fast but it far from easy. Thanks mate😎🤘

@renercadventures Жыл бұрын

Thanks for sharing my friend 🤩👏

@rccrazy Жыл бұрын

You are welcome Rene🙂 Thanks for watching👍

@doubledome2076 Жыл бұрын

SPEED AND POWER‼️👍👍🦾🦾

@rccrazy Жыл бұрын

Absolutely🤪 Thanks for watching Dome👍

@JesseBlum 5 ай бұрын

Just did a 30minutes run with the drive rc truck. But I changed the 4000kv motor to a 3200kv and using a 4s battery haha. It's absolutely nutz

@rccrazy 5 ай бұрын

Well yes if your running 4s it's basically impossible to use full throttle so you should get decent run time.

@peteuncle2935 Жыл бұрын

Nice runs, pity the street wasn't clear and there was traffic too. For the steering, you could add some exponential setting to the steering, say 20%, it reduces movement of the servo around the centre point so initial steering input is very gradual. Makes cars less twitchy and easier to steer straight.

@rccrazy Жыл бұрын

Thanks Pete👍 No not the best time for speedruns with all the parked cars and traffic. Yeah I may have to dial in some expo I think and possibly use AVC if I have another Spektrum AVC receiver to go in it👌

@JesseBlum 5 ай бұрын

I have 3 of the Drive rc cars now. They have had amazing deals on amazon I put some stronger swingarms. I'm using a 45amp esc and a 3s 2200mah 50c battery absolutely crazy

@rccrazy 5 ай бұрын

They are definitely one of the best for the prices listed in my opinion yes👌 Thanks for checking out the video Jesse🙂

@roadstar499 Ай бұрын

Very cool runs...i have new jjrc 16th scale brushless race car..uses exact chassis and radio as your orange truggy which i also have...i installed a surpass 2845 5900 kv in race car..since it has smaller wheels top speed on 2s lion batt is 25 mph...anyway using stock battery it was over 30 mph using a 20t aluminum pinion..problem is pinion gears stripped out in 40 seconds...my car stock uses 18 t steel pinion...but when motor mount is flipped over a 20t mod .6 meshes perfectly ...i ordered a jjrc 18t which hopefully works perfectly..i reinstalled its stock motor and pinion and ran it hard fir 5 mins with no issues..fingers crossed the steel jjrc pinion will handle the more powerful higher kv motor...the stock motor in jjrc race car is only a 2440 4500kv..which gets pretty hot... thanks for sharing 😊

@rccrazy Ай бұрын

Yes aluminium pinion gears are not strong in any situation these days really, maybe brushed drift cars but even then I'd want a steel pinion. But I found 22t to mesh properly when the mount is turned around, 20t was too loose for mod0.6 so maybe that contributed to it stripping super fast. Definitely go steel but next time try a 22t, hopefully the mount is exactly the same as on the truggy and buggy👍

@roadstar499 Ай бұрын

Wow...thats awesome,so i guess discipline rc got it wrong saying only 18t and 20t work with that mount...i am pretty sure jjrc would not change motor mounts specs for these cars,because it would be extremely unnecessary a dumb thing to do... Also using a 22t would add 20% more top speed over 18t which would get this jjrc sg 218 around 40 mph on 2s using 2845 5900 instead of stock 2440 4500kv...you really know your stuff..thanks for all the great information...😊

@rccrazy Ай бұрын

I guess so according to my experience. Like I said all my JJRC models have been 18t and 22t, being smallish teeth you don't want that typical gap or play between the gears like you would have with mod1 or mod1.5, but again alloy is not good in high torque situations. And yeah you'll get more top end speed anyway using a 22t so I say woohoo🥳😅 Best of luck and just remember failing is all a part of learning👌✌️

@roadstar499 Ай бұрын

Well if mesh was off like you said it makes perfect sense...i ordered 2 22t surpass hobby brand pinions...could not find steel,but i think these may be better quality alloy...only $7.50 shipped from ali...i will only run on stock 2s..it should be fine..if not i will find some steel pinions next time...thanks again.. 😊

@rccrazy Ай бұрын

@roadstar499 yes hopefully they are a steel alloy mix or something, no standing backflips and you should be good🤪

@user-ep4yv8hr8c 5 ай бұрын

Grazie ,sono Marco da Oristano .Ho acquistato la rc 16102pro,è pazzesca!grazie e complimenti

@rccrazy 5 ай бұрын

Thanks Marco😊 Glad you are enjoying your car😃

@droogsurgeon1440 5 ай бұрын

So you can run it stock basically, with a 3s and it won’t kill the engine? I fly cheap little RC helicopters and don’t know anything about RC cars. But I just ordered the truggy as you call it, I’m super excited about it, but I really need a crash course on how everything works, what it is, why I need it and the cheapest and best ways to improve it. I’m extremely poor, I’m waiting on a hip replacement and I’m out of work. Living off a small check each month. Any videos you have made that answer those questions would be sick, and much appreciated. ❤from Atlanta Georgia USA

@rccrazy 5 ай бұрын

Hey mate👋 So the motor will not have any issues running 3s but some of the 2in1 boards(receiver and esc) can not run 3s. When you get your car check to see if the 2in1 board is mounted to the chassis with double side tape or 3 screw tabs. The ones mounted with 3 screw tabs seem to fail on 3s every time but the ones without the tabs do excellent on 3s🤷 And upgrades, I highly advise getting some oil shocks for it as the stock shocks are friction shocks and are SOOOO bouncy. Get 65mm maximum shocks so the car can bottom out, that will prevent parts like swing arms, hubs, wheels, bearing and the shocks themselves from getting over stressed when the shocks are fully compressed. Other than that these car are pretty well set-up. Some diff modding like shims and doff oil would be helpful to prevent damage but not needed.

@hotkeys6853 Жыл бұрын

Thats awesome! I bought something similar to yours (scy16201- conquerer) because a video you posted before. I put same same sized motor 2847-4500kv in mine with stock gearing i was able to get 63mph-101kph. I love these little things so much fun. Do you know what specs the pinion your running are? ive ordered a couple and cant seem to get one that meshes properly with the spur.

@rccrazy Жыл бұрын

EXCELLENT results👏😃 Yes they are awesome little bashers! I believe the pinion and spar is Mod0.6, I think the stock pinion is 18t and if you flip the motor mount around you can fit 20t or 21t pinions for higher speed😁

@hotkeys6853 Жыл бұрын

Thank you so muuuuccch!! Can't wait for your next speedrun videos on this! Subscribed and liked the video. I wish you all the best. I am looking forward to more content.

@rccrazy Жыл бұрын

You are very welcome! I got to install some new diffs but yes I will try and get it out again for at least 1 more speedrun, 4s next time🤪 Thanks👍

@Undertwolitre Жыл бұрын

111 is epic for a 16889 mate !

@rccrazy Жыл бұрын

Thanks mate😁 Yes I was happy with that, as it is I was expecting some trouble at speed though😅 Few aero mods and some tweaking it should get 130kph at least🤞

@francabarros 9 ай бұрын

Hello friend. Congratulations on the video. I'm following your channel because of the quality of the videos about jjrc 1/16. I'm waiting for mine to arrive from China and I also bought some upgrades according to the list: Platinum ESC 150-SL / CNHL 3S 1500mah 100c / Dumborc X6FG / Oil Shock absorber / Aluminum heatsink with 40mm cooler. I'm thinking about testing the 2840 brushless motor and measuring the temperatures. If it gets too hot, I'll jump to a 3665 3800Kv with a 22T pinion. What do you think of this upgrade? I would like your comments about this setup and if possible, make a video testing this setup for us ;-)

@rccrazy 9 ай бұрын

Firstly, thank you very much!🙏 But I'm afraid you have purchased a much too large esc, 50a may fit but 45a is plenty. I don't think a 1500mah 3s will fit either, biggest I could fit in the battery tray was 850mah 3s. And I'm so sorry but I have more bad news, 36mm size motors won't fit these cars without MAJOR mods and a DIY motor mount, 28mm maximum so a 2850 will fit just! So sorry😕

@timallen6035 Жыл бұрын

Good video. Nice speed runs.

@rccrazy Жыл бұрын

Thanks Tim😁 Definitely need to get out for some more speedruns👌

@roadstar499 2 ай бұрын

On the orange truck was that all stock except for the Hbx wheels..88 kph is insane.what about motor and esc temps? Thanks for sharing

@rccrazy 2 ай бұрын

You are very welcome👍 Yes 100% stock but the HBX wheels and temps were fine👌 But one think you need to know if you don't already, there is two different versions of the esc, one with screw tabs that are for it mounting to the chassis, they do NOT survive 3s. The other will run on 3s and with a 22t pinion on the motor all day, it looks identical but has no tabs and is held down with double side tape instead.

@roadstar499 2 ай бұрын

@rccrazy ..i actually found one today...how do you know about esc issues with the ones with tabs...several reports or personal experiences? I did buy a sg918 which is same manufacturer it has screws and tabs holding esc...i ran it on 3s in 95 degree heat..6 or 7 350ft runs.very fast,but not 55 mph..it uses 18 pinion and 2440 4600 kv..handled so good...decipline rc moded his and got 66mph..insane..thanks for the feed back.😊

@rccrazy 2 ай бұрын

Oh sweet you got a good one, unless it got super hot on 3s as most people reported. But yes almost every person that I know of that tried 3s on the tabbed ones they failed very fast and in some cases actual flames😬 I have blown one tabbed one on 3s in just a single pull of the trigger. And yes these could quite easily get 70-80mph with the correct setup.

@roadstar499 2 ай бұрын

Yes,maybe its a good one but 2440 4600kv motor gets pretty hot on 2s and real hot when i ran 3s..car runs very smooth though..i have heat sink on the way and i will probably hook up cooling fan...i also had ordered the 116 pro right before i watched your video..also have oil shocks coming with it...fingers crossed i have the good esc/rx installed...thanks

@user-jd2fg5fx7y 11 ай бұрын

Uncle, when uncle changes riceiver, uncle changes fish, no control

@user-jd2fg5fx7y 11 ай бұрын

or not change

@judybustamante9859 Жыл бұрын

I like those HBX tyres but i find the car flips too easy once you use tyres above 85mm. And have you stripped the gears yet with all that power?

@rccrazy Жыл бұрын

These are one of my favourite wheels for smaller cars, they are so offset, I have never really had rolling issues with them. One tooth gone from the rear crown gear but they lasted a long time and very cheap to replace, definitely not complaining for the price.

@magnusstone 2 ай бұрын

Would you say the 850mah is enough? I usually use 2200mah in the MJX/HBX ones (3s)

@rccrazy 2 ай бұрын

Well 850mah 3s is perfect size for this cars battery bay, you could possibly get taller lipos in there with a DIY latch to go over a taller lipo but longer won't fit, my 2200mah 3s would never fit. Personally I'm happy with 15mins Max run time and just take a few with me.

@Mick_Au Жыл бұрын

Awesome man shame about so much traffic would be good if it was a dead end road. How’s the battery 😬😬😬

@rccrazy Жыл бұрын

Thanks Michael👍 Yeah we couldn't get to my big speedrun road and I expected so much traffic or so many cars parked. The battery is ok, wasn't punctured so should be pretty safe still👌

@Mick_Au Жыл бұрын

@@rccrazy Glad to hear You don’t like hard case battery’s?

@rccrazy Жыл бұрын

Well it's not that I don't like them I've just never had any luck with hard cases, all failed in no time🤔

@Mick_Au Жыл бұрын

@@rccrazy Interesting mate maybe because they heat builds even more inside. Also can’t see what’s going on with the hard case at least soft pack can tell straight away. Keep pumping out the content! 😎👍🏻🥳

@rccrazy Жыл бұрын

That's it, at least you can somewhere keep an eye on soft cases👌 Working on content 24/7 pretty much mate, im just slow 🐌 😅

@t3floz 9 ай бұрын

What is best? The original lion or 2s? Whats faster and what about runtime? Also is it a big chance that the esc will breake on 3s?

@rccrazy 9 ай бұрын

Lipo will be slightly faster but much better punch, I think liion would give a little longer runtime as a lipo with the same Mah. And most people have had great success running 3s, only heard of 1 case where there was a problem but according to the owner it seemed like it was faulty from the beginning.

@GM-rs1rj Жыл бұрын

Is it worth upgrading the tires with inserts? Nice video btw 👍😎

@rccrazy 11 ай бұрын

Thanks👍 But sorry, I don't quite understand, the wheels have foam in them already.

@GM-rs1rj 11 ай бұрын

@@rccrazy do the original wheels have foam? To me they feel really soft therefore I was looking to change them. But if they are filled already it will not make much of a difference I guess.

@rccrazy 11 ай бұрын

Oh sorry I didn't realise you were talking about the stock wheels having HBX wheels in this video, which do come with foam. No I don't think the stock wheels have inserts. In some cases it helps having foam inserts but I don't think it's necessary with these little cars just bashing around. But if you like to upgrade or just tinker on your cars then why not experiment😁

@GM-rs1rj 11 ай бұрын

@@rccrazy alright thanks. The upgraded shocks are on their way so u think that will improve a lot. Thanks for the reply 👍

@rccrazy 11 ай бұрын

Your welcome👍

@wilber8637 3 ай бұрын

Wheel size inside is 12mm..if any wheel is 12mm must can use at him already...if im at there im also must join bro play together too...

@rccrazy 3 ай бұрын

Sorry about the late reply. Yes if you really wanted to you could use HUGE 1/10 monster wheels, not a good idea for the diffs though😵😅

@wilber8637 3 ай бұрын

@@rccrazy never mind brother...is ok...im also got think want to use more bigger wheel too..😅 want to do same like brother rc car also... brother have a nice days ..

@yatescharles69 Жыл бұрын

Nice build

@rccrazy Жыл бұрын

Thanks for checking it out👍

@user-es9bb3vl1y Ай бұрын

Mate help something happened to my JJRC battery.. I bought new JJRC but it is not moving backward or forward but yes the steering works, it turns left and right but the light of the RC flashes continously which is a sign of battery mal fucntion, Now what should i do?

@rccrazy Ай бұрын

I thought flashing light was a indication of a flat battery. You charged the battery to FULL yes? If so then it will be as you said a faulty 2in1 board, in that case it would be a warranty claim or just order a new jjrc 35a 2in1 board.

@bendavis4675 7 ай бұрын

Mine went up in smoke after I tried using a 3s battery in my JJRC Q117 . Unfortunately after just a few minutes not even close to full throttle, it started smoking and immediately stopped working. I live in a snowy climate so I wasn't sure if it was the battery or that it was dusted with snow on the inside. Has anyone else used them in wet or snowy conditions?

@rccrazy 7 ай бұрын

Oh no, your not the first person to say it failed on 3s. Not sure how all mine work so good on 3s🤔 I can not help with wet or cold weather driving sorry, but as I said others have failed due to running a 3s lipo.

@bendavis4675 7 ай бұрын

Thanks for the response! Mines still under warranty so I’m exchanging for a new one. What battery do you use? Maybe I bought bad battery.

@bendavis4675 7 ай бұрын

Thanks for the response! Mines still under warranty so I’m exchanging for a new one. What battery do you use? Maybe I bought bad battery.

@rccrazy 7 ай бұрын

@bendavis4675 that's good! I use ZEEE 850mah 100c 3s lipos. I don't think it was a bad lipo though, as I said quite a few people now have said their escs failed on 3s so just be aware it may happen again. If the esc has changed in any way between manufacturing runs that could be the issue, 1 different diode or capacitor and it can effect its capabilities.

@bendavis4675 7 ай бұрын

That makes sense. Thanks for the help!

@user-cv3ov9pe1e 21 күн бұрын

Just a quick question ive got this car and im about to receive some 3s battery whats the best esc you recommend or any other components i should uprade so that nothing blows up 😂

@rccrazy 21 күн бұрын

If you are going to use a hobby grade esc you will also need to replace the controller and receiver as you can not use the stock controller or receiver(2in1 board) But I definitely recommend getting a good quality esc if you do go down that route, Hobbywing 40a or 50a will fit, I use the Hobbywing 10bl50a in mine now and it's flawless. Please don't buy Surpass or GoolRC escs they are terrible😬

@user-cv3ov9pe1e 21 күн бұрын

@@rccrazyok thank you for that ive looked around but cant seem to find that esc it would be amazing if you could send me the link if not thats ok thanks for the advise

@rccrazy 21 күн бұрын

The 10bl50a or the esc in the video?

@samucapb2 7 ай бұрын

Where can I find the tires that you are using on your JJRC Q117? Thanks!

@rccrazy 7 ай бұрын

I got mine from Ebay Australia but these are exactly the same👍 nl.aliexpress.com/item/1005005960649731.html?spm=a2g0n.shoppingtesla.mainproduct.d0.2e5bL3liL3liZb&pdp_npi=3%40dis%21AUD%21AU%2436.70%21AU%2420.91%21%21%21%21%21%40210307c117052937553108603e0279%2112000035056089934%21btf%21%21&afTraceInfo=1005005960649731__unknown__c_ppc_item_bridge_lp__gcGHQWR__1705293755556&gatewayAdapt=glo2nld

@superteuteuch 6 ай бұрын

hi, what's the hex size?i cant find the info anywhere @@rccrazy

@rccrazy 6 ай бұрын

12mm hexes👌

@superteuteuch 6 ай бұрын

@@rccrazy perfect!

@jhomjuarez3328 Жыл бұрын

Hello! Where did you get those wheels? I want them! Nice vid brother

@rccrazy Жыл бұрын

Thanks for watching👍 I got them from ebay Australia, sold as Wltoys upgrade wheels but they are actually HBX wheels. Just found them available on Aliexpress👇 m.aliexpress.com/item/1005005007721101.html?pdp_npi=2%40dis%21AUD%21AU%2426.01%21AU%2415.86%21%21%21%21%21%402101ef6816842882419525469e6db0%2112000031324237860%21btf&_t=pvid%3Af5c27cac-5a4c-44b1-b210-e95cb5220150&afTraceInfo=1005005007721101__msite__c_ppc_item_bridge__xxxxxx__1684288242&spm=a2g0n.ppclist.product.0&gatewayAdapt=Pc2Msite

@jhomjuarez3328 Жыл бұрын

New subscriber!

@rccrazy Жыл бұрын

Really appreciate it thank you🙏😊

@rickykonoloff5047 Жыл бұрын

Dads 😎 man

@haydenkelliher2859 Жыл бұрын

Extend the wheelie bar out like a drag car

@rccrazy Жыл бұрын

I'm assuming you mean the JJRC, I'm not modifying anything major for on-road as it's staying a basher

@hectorchavez7616 9 ай бұрын

HOLA BUENAS NOCHES, ME PODRÍA PASAR EL ENLACE DÓNDE COMPRÓ LA BATERÍA DEL CARRO COLOR NARANJA Dive JJRC Q117 ...?

@rccrazy 9 ай бұрын

www.amazon.com/Zeee-Premium-Quadcopter-Helicopter-Airplane/dp/B08H5GD35D/ref=cm_cr_arp_mb_bdcrb_top?ie=UTF8

@usethatflame Жыл бұрын

Hey was anything running hot after this on the scy with the 3s?

@rccrazy Жыл бұрын

No it was fine on 3s. I believe even running a 4s esc and lipo with the stock motor would still run cool just doing speedruns👌

@usethatflame Жыл бұрын

@@rccrazy thanks for the quick response mate, you recommend having a bash on 3s with stock electronics?

@rccrazy Жыл бұрын

Yes this car is awesome bashing on 3s with the stock system, no heat issues but just keep in mind more power could damage other components like diffs especially if your landing jumps with a lot of throttle or doing full throttle launches.

@usethatflame Жыл бұрын

@@rccrazy legend thanks mate I'm goanna order one. Looking forward to see more of your videos

@usethatflame Жыл бұрын

@@rccrazysorry man is the battery plastic piece tight when you put the zeee battery in? I can only find batteries that are like 3mm higher and don't wanna snap that plastic thing that holds the battery down. I can't find those zeee 100c batteries anywhere

@user-vb3dg3pb6s Жыл бұрын

Cool, where can i buy these rc cars in Australia? Let me know, much appreciated bud

@rccrazy Жыл бұрын

Sorry mate we'll over slept😴😆 I get a lot of my stuff of ebay including these JJRC rigs. www.ebay.com.au/itm/155379523543?hash=item242d575fd7:g:~D8AAOSw1h5j0zHI&amdata=enc%3AAQAHAAAA4J2Y6W3PmOL2A8%2BY0aLY14rSI60ZuEUAaCoq2afOhzE%2FPZ5Tr7SJJUkh%2F1m78XrRgc0ICO0ceKi1ki%2FUTEtOMdHIts%2BM%2BgSZLZRlATIg%2Bk8yAR2S%2BK56E%2FnDEVOxeM%2BZXtYiTF1P5BqNj%2BNqijHmFRDGEoyRzV6fDQM7208XfYSrmG9hFbeKktnpXuHi0p8j1h7yTb%2BgZjlq5e30CnzFpGa99ARPR1sbjUvqsLDr21bgbqVRthgCNLm5DcY74ufitpbLslSAT5MHkScYT3JwBcnXLm%2FMWBYxddl1xfAnRINZ%7Ctkp%3ABk9SR7jBsbXTYQ

@mzmhrc1274 Жыл бұрын

With that custom motor mount, can u put 3650 motor in it?

@rccrazy Жыл бұрын

Not really custom just modded to fit larger pinions. I don't think 36mm motors will fit due to lack of clearance, 28mm motor is basically sitting on the chassis already, you could cut out the chassis for the motor maybe🤔

@mzmhrc1274 Жыл бұрын

@@rccrazy yes i mean modded the stock one. I bought one mjx hyper go brushless maybe will receive it another 2 or 3 days. I think maybe i will return it back and buy this one.

@marvinv2372 Жыл бұрын

What size 3s battery can I get for this amazing car

@rccrazy Жыл бұрын

I think you could fit around 1000mah upto maybe 1500mah 3s depending on brand. I just use 850mah because I know most should easily fit and get long enough run time.

@TomTheSurgen1 5 ай бұрын

I run mine on 3s all the time no issues m6 end

@rccrazy 5 ай бұрын

So I'm assuming your 2in1 board is mounted with double side tape yes? The ones that have 3 mounting tabs molded to the box rather than just double taped on do not run 3s or fail very fast.

@TomTheSurgen1 5 ай бұрын

@@rccrazy I will check later

@speedslidesandspeedrides1728 6 ай бұрын

Can i use 3s with a 35a esc a 4400kv motor and 17tooth pinion gear

@rccrazy 6 ай бұрын

If you mean the stock esc then I would not recommend using 3s. A good 35a esc and upto 2838 4400kv motors may be OK on 3s but if you start going bigger motors like this 2847 4000kv motor I would highly recommend a 45a or higher esc for 3s. And 17t does not fit on these cars without modification, 18t or 22t mod0.6 only.

@speedslidesandspeedrides1728 6 ай бұрын

@@rccrazy i have a surpass esc with cooling fan 32000rpm cooling and 2845 motor 4400kv in my q901 with 10 scale tires on a 1 16 scale and 14t pinion but the tires geares it to about 18t so can i run 3s on this onroad

@rccrazy 6 ай бұрын

@speedslidesandspeedrides1728 yes if the surpass esc is 3s capable then that setup should run fine on 3s on-road👌

@speedslidesandspeedrides1728 6 ай бұрын

@@rccrazy it says 2 to 3s

@rccrazy 6 ай бұрын

@speedslidesandspeedrides1728 yes should work then😁

@Rustin-ld6qi 2 күн бұрын

How do you measure speed ?

@rccrazy 6 сағат бұрын

SKYRC GSM020 GPS system(available online)and the phone app.

@yCaraleowGamer 4 ай бұрын

Esse SCY 16102 PRO SUPORTA BATERIA 3S? sem fazer upgrade

@rccrazy 4 ай бұрын

Technically no only 2s.

@yCaraleowGamer 4 ай бұрын

@@rccrazy como conseguiu usar 3S?

@rccrazy 4 ай бұрын

@yCaraleowGamer only the non tabbed escs seem to run 3s. Some are held down by 3 screw tabs. If yours is held down by 3 screws DO NOT try 3s but if it has no tabs and is held down by double side tape then 3s may be OK.

@yCaraleowGamer 4 ай бұрын

@@rccrazy thank you very much for responding

@carlanchastain9989 Жыл бұрын

What tires are on the car

@rccrazy Жыл бұрын

m.aliexpress.com/item/1005005007721101.html?pdp_npi=2%40dis%21AUD%21AU%2426.01%21AU%2415.86%21%21%21%21%21%402101ef6816842882419525469e6db0%2112000031324237860%21btf&_t=pvid%3Af5c27cac-5a4c-44b1-b210-e95cb5220150&afTraceInfo=1005005007721101__msite__c_ppc_item_bridge__xxxxxx__1684288242&spm=a2g0n.ppclist.product.0&gatewayAdapt=Pc2Msite

@user-jd2fg5fx7y 11 ай бұрын

Hi what is the ESC name and receiver name and what prices

@user-jd2fg5fx7y 11 ай бұрын

In the first car video

@rccrazy 11 ай бұрын

Dumborc X6FG receiver Hobbywing WP-SC8 120A esc

@rccrazy 11 ай бұрын

Esc www.aliexpress.com/item/1005004384790528.html?&_t=pvid:52be5a3e-c9b1-4aa7-a529-d7bf3c450683&spm=a2g0n.ppclist.product.0 Receiver www.aliexpress.com/item/1005003118208189.html?pdp_npi=2%40dis%21AUD%21AU%2430.55%21AU%2415.89%21%21%21%21%21%402101c5ac16936612409558706e3c3d%2112000031474278603%21btf&_t=pvid:942c4f52-5150-40be-8fe9-18b371abe444&spm=a2g0n.ppclist.product.0