Put Aluminum Foil on Led Bulb Brightness Will Increase 100%

Рет қаралды 944,054

Жыл бұрын

Led bulb repair can be done at home with simple methods. You can repair led bulbs with very simple tools such as graphite and aluminum foil. LED bulbs can break down when they get too hot. You can fix these led bulbs at home instead of throwing them away. Aluminum foil and pencil methods are effective in repairing led bulbs. Don't waste money on a new led lamp using these methods.

Пікірлер: 339

@drstapes-ravi 6 ай бұрын

New generation clickbait

@amicxble9350 2 ай бұрын

As u clicked lmao

@bebz_tvchannel450 2 ай бұрын

No! Thats legit i already try that

@alsilverman5084 Ай бұрын

Thanks for the alert. Didn’t watch.

@The_Real_Grand_Nagus 29 күн бұрын

@@amicxble9350 ... which is why it's called clickbait. What's your point?

@amicxble9350 23 күн бұрын

@@The_Real_Grand_Nagus and u clicked as well and goodie complaining too🤣🫵

@michaelbrukley1311 Жыл бұрын

Do the smart thing and use solder. The graphite will cause resistance heating. The alunium foil will break down and possibly catch fire.

@gweedomurray9923 Жыл бұрын

~ Which goes to prove that "a little knowledge is a dangerous thing".

@sumitabhbishoyi6666 Жыл бұрын

@@gweedomurray9923 awesomely said

@gweedomurray9923 Жыл бұрын

@@sumitabhbishoyi6666 ~ Sadly so, Sumitabh Bishoyi . Thank you.

@TTGTO288 Жыл бұрын

Do the smart thing and don't be a cheap ass, go buy a new $2 bulb ...

@skepticalgenious Жыл бұрын

I was wondering if it was graphite or a special pencil for electricity. So many things could I theorize be added to the pencil making it electrically conductive.

@showdownz 6 ай бұрын

This is pretty unsafe. Led Bulbs do in fact get pretty warm. The normal heating and cooling cycles when used will break down the adhesive of the tape and it could lift, weakening the aluminum's connection. Now what you have is a small pocket of hot air with kindling (the paper) and an ignition source, the electric arc from a barely touching tinfoil connection. Surrounded by plastic which is most likely flammable. Fire takes 3 things: Heat, Fuel, Oxygen. (a spark creates enough heat to start the process). The graphite seems better, but not much... for the same reasons. Solder it!

@mrjoepietube 5 ай бұрын

that was also my first tought the carbon pen trick maby good , the foil trick unsave, soldering the best

@hafeth6093 Жыл бұрын

The load will increase on the rest of the remaining worms, and they will burn one after the other... It is a temporary and non-permanent solution... Thank you..

@ruslanmedian5689 Жыл бұрын

Стабилизатор тока там стоит, нагрузка только на нём возрастёт, но не на светодиодах.

@willtj1787 Жыл бұрын

It's normally they are using constant current circuit on the led bulb, so no, you are wrong

@thedislikebutton1907 Жыл бұрын

temporary and non-permanent both have the same meaning.

@HolarMusic Жыл бұрын

EDIT: this comment is wrong, the one below it is correct @@willtj1787 the same amount of current will split up between less LEDs, meaning each one will get more

@richardtomaszewski3569 7 ай бұрын

@@HolarMusic No, the LEDs are wired in series meaning the same current runs through all the LEDs. That's why the entire bulb quit when one LED failed, the circuit was broken. What will actually happen is since the LED driver is designed to put out a fixed amount of current the voltage output will drop since there is one less LED to push that current through.

@BernhardSchwarz-xs8kp 4 ай бұрын

The scares on the left hand of this dude indicate where his way of solving problems leads. I am surprised that he still has both hands.

@randovid1 Ай бұрын

this mfer is even using metal tweezers to check what led is burnt while the led is live lmao, even if it has insulation, this mfer is holding it very close to the metal part lol

@caponych Жыл бұрын

Никогда не лезьте во включённую лампу неизолированным инструментом - Вас может запросто убить электричеством, хоть напряжение на одном светодиоде и невелико, но так как источник питания в лампе не имеет галванической развязки от сети 220В, то Вы можете попасть под потенциал сети.

@CaptRich-bi3gp Жыл бұрын

Aaaaaaaahhhhh!!! Run!!!!!!

@SunSetAutomacao Жыл бұрын

But removing one or more LEDs will increase the current in the electrical circuit, which will soon cause other LEDs and other components to burn out. The correct thing is, if you need an LED lamp with more brightness, buy another one with greater power. Só que retirando um ou mais leds ira aumentar a corrente do circuito elétrico, que logo mais vai causar a queima de outros leds como também de outros componentes. O correto é, se necessita de uma lampada led com mais luminosidade é comprar outra de maior potencia.

@willtj1787 Жыл бұрын

Have you heard about constant current circuit?led bulb generally use constant current circuit. So no you are wrong

@HolarMusic Жыл бұрын

@@willtj1787 since the LEDs are connected in series, the same amount of current will split up between less LEDs, meaning each one will get more than it should

@izzzzzz6 4 ай бұрын

use a resistor or they will blow even quicker as they are in series. When he says increase brightness by 100% it's because they go from not working to working lol. Use a resistor or another led. Problem is the heat sink it's not easy to get enough heat into the board to solder them due to the built in heat sink or ground plane.

@John-vz1wq Жыл бұрын

For the brightest effect, the foil should be wrapped all over the screw of the bulb

@regularguy519 Жыл бұрын

🤣

@blackknight9558 Жыл бұрын

Hahaha

@Vex22778 Жыл бұрын

@@blackknight9558Don't forget to have a little bit of thermite

@AlanHartPhD 6 ай бұрын

This is a joke

@kazotorakun4428 Жыл бұрын

والله انك شخص راءع سيدي شكرا لك

@kealahau6727 5 ай бұрын

It s like telling people they can learn to fly by jumping from a bridge...

@ledlightinghyderabad Жыл бұрын

Every light has it's unique look n rich lighting

@un65tube Жыл бұрын

OK. This might technically work. But be aware that depending on the lamp design you may risk to get an electrical shock that may kill you! This should only be done by people that are aware of the danger working with electricity. If you ever do it it would be better to replace the burnt out LED by one of the same type. And even though I like the idea to save money and produce less waste it might be better to spent $2 for a new lamp. That's much more environmental friendly than a burning house!

@nixulescu9399 Жыл бұрын

yeah this might be safe on low voltage instalations like those ~40v cables, otherwise it's a bad idea!

@SylvainSybaris Жыл бұрын

Smart people will just buy a brighter bulb instead of rigging a low led bulb.

@kungfumaster12 Жыл бұрын

doesnt make the bulb brighter... this is just a how to fix a broken led lightbulb. smh

@jimb032 Жыл бұрын

And you are being very generous with the word "fix" . Kludge, bodge, rig, and other more appropriate words come to mind.

@dionjennings2379 5 ай бұрын

Hot damn! I just this minute tried it and it works completely. But I think I'll go the way of solder instead of the foil. THANK YOU FOR THIS FIX!!!

@izzzzzz6 4 ай бұрын

use a resistor or they will blow even quicker as they are in series.

@hambernat6444 4 ай бұрын

Harmful video, nice time catching fire. 👍

@paulie6446 Ай бұрын

Licking the diodes whilst plugged in also makes it brighter.

@cepedaruben1 2 ай бұрын

I've been getting my LED bulbs to work again the same way. I got the idea from the Christmas lights that failed in the same way back in the day😅. Leave the cap off so they don't overheat tell everyone to keep their friggin hands away from them. They all still work many years later.😮 No problem I'm just getting my money's worth😂.

@chrisanon3075 Жыл бұрын

Die idee ist Wortwörtlich der Burner 😂 Cool wie man einen Wiederstand vom Hersteller überbrückt . Mit glück reduziert es die Lebensdauer mit Pech auch die vom Bastler 😂

@CaptRich-bi3gp Жыл бұрын

Most definitely

@theonewhoknows2 4 ай бұрын

Yep well said.

@izzzzzz6 4 ай бұрын

@yohankerk4162 Жыл бұрын

С синей изолентой можно было даже фольгу не подкладывать. С синей изолентой все работает! 😂😂😂

@user-rh7jx6di1g Жыл бұрын

Видео неправильного ремонта. Правильно это надо паяльником припаивать новый светодиод

@I.X.Y.18 Жыл бұрын

Зачем новый,что есть то дочтаточно...

@user-rh7jx6di1g Жыл бұрын

@@I.X.Y.18 быстро перегорит, потому что будет больше тока на меньшее количество светодиодов, если тупо один выкинуть

@moto-lab250 Жыл бұрын

i find that sticking a fork into the socket also works well.

@TRAZExYT 4 ай бұрын

Be careful when commenting stuff like this coz some people without any knowledge/ kids will try this

@TheRealXXDarknezz 3 ай бұрын

@@TRAZExYTYes. For any mentally impaired people or children: Don't do this. It's a joke and very dangerous in reality.

@user-eu8dc4ee9o Жыл бұрын

👍👏👌

@Faim75 Жыл бұрын

Синяя изолента - это то что надо!

@adamsosnowski3451 Жыл бұрын

taka naprawa wystarcza maksymalnie na miesiąc

@stanisawk1385 Жыл бұрын

po napprawie swieci jasniej bo w szeregu diod jednej już nie ma, więc napięcie rozkłada się na pozostałe, ale są one wtedy jakby przeVoltowane, więc ich zywotność maleje . To jjuż lepiej wlutować tam nową diodę

@antonioliandro7553 Жыл бұрын

olá bom dia parabéns gostei muito Eusou Antônio de viçosa Minas Gerais

@CaptRich-bi3gp Жыл бұрын

I felt the same way when initially seeing this actually played out. However, now I feel I may have been mislead to some degree. But why, what is the end game? What do they want? Who is "they"?

@turibinosanches4692 Жыл бұрын

Mas gostam de aparecer... faltou colocar o RG e CPF...

@j7ndominica051 Жыл бұрын

The rubber tape will melt and fall off. The current through the remaining LEDs will increase and the will burn out.

@ruslanmedian5689 Жыл бұрын

Ток не увеличится.

@Benoit-Pierre Жыл бұрын

bad tapes will. 3M Scotch TM won't.

@cesarcua5823 Жыл бұрын

The LED connection is in series if are going to short the busted LED the good LED will overload. Correct me if i'm wrong

@abhishekarora1 Жыл бұрын

Correct, better bro solder led or resistance on it. This trick will not last more than a few weeks.

@vijendrarastogi8601 Жыл бұрын

Correct

@DEEPAKSINGH02041992 Жыл бұрын

CESAR bro you are wrong.. As the current remains same in series, other LEDs won't be overloaded. This is DOB circuit. Trust me, I am an engineer.

@shininsemnia3825 Жыл бұрын

@@DEEPAKSINGH02041992 nope, you are tech support

@v.j.chandrasekharchandrase6218 Жыл бұрын

You are right . After all the main flow cannot be checked when the circuit in the led bulb is tampered . It’s just like reigniting the filament bulb when the tungsten matter draws more electricity . For example a tungsten bulb when the loosened filament burns 4 times brighter than its original power.

@gadepallibharadwaja1034 Жыл бұрын

To add radiating aluminium particles are the biggest cause of cancer. Please research further.. also can correct me if I'm wrong. Thank you..

@philparrish6914 Жыл бұрын

You are wrong.

@A25665 6 ай бұрын

The thumbnail😅😂😂😂

@asrulkreatif Жыл бұрын

Good job broo

@antoniofiorani7338 Жыл бұрын

Bravo..bravo..BRAVISSIMO😂 CIAO

@orhanusterman1409 Жыл бұрын

bord ısınınca bant gevşeyerek devreyi keser. board gets hot and tape loosens and it cuts off

@DriesduPreez Жыл бұрын

Good video, but misleading thumbnail

@tolzsfogas2295 Жыл бұрын

it's not a good solution, because this way the other leds have a higher voltage and thus the others will be destroyed sooner.

@yngvedanielsson448 Жыл бұрын

KORREKT !

@teammouse Жыл бұрын

Incorrect i did this procedure on 2 led lights about 6 moths ago and they still work fine

@tolzsfogas2295 Жыл бұрын

@@teammouse add that more LED is very sensitive to current...

@hsafik Жыл бұрын

@John-vz1wq Жыл бұрын

The driver is a constant current limiter so the remaining LEDs should be fine

@bass305-HCCA Жыл бұрын

I'll just go with a higher lumen bulb for an extra couple of bucks.

@Conchobhar Ай бұрын

Learn how to solder! With aliexpress it's never been easier to invest in good soldering tools, and learning how to solder is a ton of fun.

@leandroribeirocorrea4 Жыл бұрын

Nice work. Thanks.

@cHAOs9 Жыл бұрын

You will get a free light show if you screw a ball of foil into the light socket. Dumb people: if you havent burned your house down yet, dont try this its a joke.

@ledlightinghyderabad Жыл бұрын

😮 wow 😳

@zacharynguyen7286 5 ай бұрын

Hope everyone is doing good and staying safe

@hhyling8483 Жыл бұрын

recipe for fire in your house?

@user-fr6kz3oe5s 28 күн бұрын

my bulb is a glass dome, best and safe st way to remove this ?

@user-gv3zx7ju7w 5 ай бұрын

LED칩을 교체하고 납땜 할거라 생각했더니 그냥 포기하고 은박으로 붙였네요. 잘했습니다.

@flash001USA 6 ай бұрын

How to burn your house down with graphite and tin foil modifications to a cheap light bulb. Yeah, I think I got it now... Thanks.

@jabjab12 4 ай бұрын

Dont mess with live socket voltage

@chrish1695 Жыл бұрын

why not just replace the led?

@mrjoepietube 5 ай бұрын

that is indeed the best , i have done it and the now keeps on working for many hours but it is very very fiddly job with these smd leds and normal solder station.

@bananasandbass 2 ай бұрын

This looks completely safe…

@izzzzzz6 4 ай бұрын

This just means they are going to blow even quicker. If you are going to try it this way put a resistor in.

@Sevastopol-gx9vc 4 ай бұрын

Человечество давно создало паяльник. 😊

@a.k.m.manzurmurshed210 Жыл бұрын

Fantastic idea!!!!!!

@jimb032 Жыл бұрын

No it's not. It's temporary at best. It will increase current across the rest of the LEDs and they will be short lived.

@paulb9769 6 ай бұрын

Fantastically bad idea

@eyesir7827 Жыл бұрын

i hear you loud and clear

@kk-xg3xl Жыл бұрын

current limited at the DC convertor chip.......the Brightness of each LED are no change

@DEEPAKSINGH02041992 Жыл бұрын

You are correct kk, that's what I am trying to teach to the commenters, but they are dumb and don't understand. Looks like tiktokers are all over.

@LanielPhoto 5 ай бұрын

I believe it is the voltage that is the constant. No current limiting....

@mrjoepietube 5 ай бұрын

defintly constant current.

@ChinhNguyen-mw6bc Жыл бұрын

Độ sáng thì phải nói là sáng hơn nhiều nhưng độ bền thì lại giảm xuống cũng k ít. Nếu làm như vậy thì thắp sáng đc mấy canh h là bị cháy thôi à. Vậy thì sáng hơn để rồi vứt thì sáng hơn làm cái gì chứ😅😅😅

@CaptRich-bi3gp Жыл бұрын

Millennial's, am I right? They think this is a disposable world.

@user-mg4lg3lw1h Жыл бұрын

你要用鉛筆的鉛來做導電目標久了也是會因高溫而脫落(用錫箔紙亦同)，用錫焊接不是更好!最好的方式還是買相同燈珠做更換壽命才長，要不然其他燈珠受電增加，整體燈珠壽命也會跟著縮短~

@paulthemachinst6545 4 ай бұрын

Why is it he tested in the 3rd outlet, passed about and didn't put it back in the same outlet 🤔

@punkbrutus Жыл бұрын

This might cause fire.

@user-jq2gg3sm4c Жыл бұрын

А если убрать два светодиода то яркость увеличится в 200 раз? А если три? 🤯 А для увеличения яркости если нужно то можно просто снять колпак.

@liu96uu85 Жыл бұрын

пффф, я только 3 оставил и лампа весь город освещает! по плану - вообще все убрать и вместо солнца использовать!🤣 ну, а если серьёзно - автор ролика явно долба.б

@user-pb3cb3eh3l Жыл бұрын

Чем больше закарачиваешь перегоревших светодиодов тем лампа светит хуже ,а не ярче как вы тут пишите.Говно оно и есть говно,в Китае это стоит копейки ,а у нас дерут деньги .Вчера сын купил на алике лампы с прозрачной колбой и из 10 штук одна не исправна,моргает как паралитик и ни где ни чего не подрегулируешь.Только в мусорку.

@CaptRich-bi3gp Жыл бұрын

@@user-pb3cb3eh3l yeah damn skippy!!!

@user-hc1oc5ip7f Жыл бұрын

@@user-pb3cb3eh3l это к нанооленеводу))... оно тут же высрет супермегонано-заводик...из могил поднимет конструкторов и инженеров... эх, заживём))))))

@alexfox3036 Жыл бұрын

Ой! Фсё! Я сразу при покупке закорачиваю ВСЕ светодиоды! Теперь у нас в селе каждый день солнечный!!! светит на 100500 ярче солнца! Вот так то!!!

@Jack19000 Жыл бұрын

THIS ISNT HOW TO MAKE THEM BRIGHTER THIS IS HOW TO FIX BROKEN LEDS

@RynaxAlien 2 ай бұрын

Forgot to put on tin foil hat

@CaptRich-bi3gp Жыл бұрын

You know what; to hell with all that. I've got a few bucks, I'll just go buy a couple of new ones. OK...?

@TheSpiderm0nkey 4 ай бұрын

It's not 100% brighter if you remove one of the COB elements 😅

@tablatronix Жыл бұрын

Just buy some solder

@szymonbaranowski8184 Жыл бұрын

i can feel how it murders eyes

@mattlawton4715 Жыл бұрын

Why not solder new led in 🤔

@123syamsul Жыл бұрын

He showed how to 'resurrect' a dead LED bulb without special skill such soldering etc. Perhaps the bulb's life will last shorter than before, but it doesn't matter.

@raymondchan3587 Жыл бұрын

@@123syamsul It may cause fire shorting circuit.

@mrjoepietube 5 ай бұрын

best but very fiddley with these smd leds.

@galatei11 23 күн бұрын

You do know that you're effectively delivering more energy to the other LEDs shortening their lifespan even further ?

@Duniakreatif07 Жыл бұрын

Sip

@harshatejaa5877 Жыл бұрын

Will there be any change in power consumption?

@jimb032 Жыл бұрын

Yes, it will shortly change to zero. Because doing this will increase the current across the rest of the LEDs and I can promise you they will be short lived. I give it a week at even light use

@Perktube1 Жыл бұрын

The thumbnail lied to me.

@philparrish6914 Жыл бұрын

@GamrokFeddy 29 күн бұрын

Bro don't use the graphite method. Just put some solder on it.

@Paul-044 3 ай бұрын

Wouldn't it be cheaper to buy a new bulb?

@lucky13manyou Жыл бұрын

БЛАГОДАРЮ !!!!!!!!!!!!!!!!!!!!!!!!!!!💥💥💥💥💥💥💥💥👍👍👍👍👍👍👍👍

@bharatbosamia8814 Ай бұрын

If you remove 1 led bulb from series after someday another led will burnt

@temporarilyjosh 5 ай бұрын

It was a great fix until my house burned down.

@mauricesalaman7308 2 ай бұрын

All he is doing is just increasing the current amount. He will be paying more money now!🤔😜

@chrisshari8367 Ай бұрын

The last time I used pencil lead as a conductor I was in prison!!! And that was to make a lighter. I am not saying it can't be done, what I am saying is,why not just use some solder and repair the light a more effective and efficient way? Solder would be the absolute right way to go for this repair.

@sharkfinn6469 Жыл бұрын

Regardless, these things are theown away i. Masses because they are not easily servicable. Responsible production needs to be enforced. Too much wastage is going on for corporate greed

@34Gw 5 ай бұрын

Awesome idea to cause fire

@zerazara 4 ай бұрын

Graphite increase conductivity with increased heat. Eventually your house could burn down.

@user-mz7de5tk4u Жыл бұрын

У меня уже несколько ламп горят после такого ремонта больше года. Светят ярче. Использую в быту в нормальных условиях.

@user-pw1mm4js5u Жыл бұрын

Это просто муж забыл вас предупредить, что он давно выбросил лампы "после ремонта" купил и вкрутил новые.Вот они и нормально горят.Сегодня даже новые лампы ,и те не все работают по году и дольше, а вы тут рассказываете сказочки, как у вас выхолощенные так долго светят.Я несколько раз пробовал такие "ремонты" , только посерьезнее, с хорошей пропайкой,но лампы после этого живут считанные дни.

@amerikosy_naxuj_vash_youtub Жыл бұрын

Не пезди пиздобол. Больше года.

@CaptRich-bi3gp Жыл бұрын

You bumped your head

@ss-5553 Жыл бұрын

NIce job, thank's for the video.

@4khakan Жыл бұрын

I do not understand why you do not use soldering iron. i repaired my bulbs always but i see this video. what for you trying with pencil and aluminium? go solder it.

@Life_is_short_Enjoy Жыл бұрын

Its costly.

@4khakan Жыл бұрын

@@Life_is_short_Enjoy ahah do not live if you do ot have 0.0001 cent

@TheOgi22 7 ай бұрын

How to make fire.

@lecabramacabra9917 4 ай бұрын

....I'll pass, i don't feel like setting my house on fire today.

@user-pb3cb3eh3l Жыл бұрын

Все эти лампы перевод денег; лампа накаливания горит по несколько лет не сгорая,а это говно порой и на месяц не хватает.

@alfabe1823 Жыл бұрын

Terbiyeli yorum yap mide bulandırma ayıp.

@SamsungA-nx4ey Жыл бұрын

Это не лампы, а продавец. Или электричество.

@user-dd3sr5dc5g Жыл бұрын

Да, но только электричества лампа накаливания расходует в 10 раз больше светодиодной при той же яркости свечения.

@user-pb3cb3eh3l Жыл бұрын

@@user-dd3sr5dc5g То что берет лампа накаливания ,ты в разы больше истратишь на эти светодиодные покупая их часто или расходуя электричество на перепайку этих диодов,а еще они вредны для нашего зрения.

@user-dd3sr5dc5g Жыл бұрын

@@user-pb3cb3eh3l , у меня в месяц за электричество получается цена этой лампочки. То есть за год - 10 лампочек. Работают они 5-7 лет, а если со стабилизатором, то и 20 лет могут. Нет, если заявленные 30000 часов они проработает - гораздо выгоднее по деньгам, чем лампы накаливания, хоть они сами и стоят в 5-7 раз дешевле. Это когда электричество стоило 4 копейки - тогда да.

@demonkey123 7 ай бұрын

Just buy a new lamp. You will live longer 👍

@mn-ru4li 2 ай бұрын

Do try this at home

@TTGTO288 Жыл бұрын

Do the smart thing and go buy a new $2 bulb ... how cheap are you? Something like this is what intelligent people call "a fire hazard waiting to happen" ...

@spicky2966 Жыл бұрын

more current for the remaining bulbs-If overload led life is reduced.........

@123syamsul Жыл бұрын

Yes, you are right. But for the moment it doesn't matter especially in emergency (late night and we don't have spare bulb, for example).

@user-vh9hk3rw7x Жыл бұрын

Залепушник! Синяя изолента даже легендарная, отвалится через пару часов. Перемыкать сгоревшие светодиоды совет для глупых пацанов!

@CRUCC22 7 ай бұрын

Brightness Will Increase - life will decrease

@Sanderssolutions 3 ай бұрын

You just put it on OFF. 100 % Result !!

@alinnimeni3789 Жыл бұрын

Tried this on a phillips led bulb and it doesnt work, can t find the faulty LED.

@jimb032 Жыл бұрын

Good. It's a stupid idea anyway. It's temporary at best. It will increase current across the rest of the LEDs and they will be short lived

@watching95 Жыл бұрын

Might be the wires from the socket part of the bulb to the board.

@shiroumxm2052 Жыл бұрын

just a bridge..wich will make the rest of LED get more current and wear way faster

@mrjoepietube 5 ай бұрын

nope constant current circuit

@123syamsul Жыл бұрын

Thanks you for the good idea.

@jeffcantley9203 Жыл бұрын

It's not really a good idea

@d.m.mdarkmoonmusic306 Жыл бұрын

is that real?

@philparrish6914 Жыл бұрын

Perform at your own risk. Don't believe everything you see/read on the internet.

@d.m.mdarkmoonmusic306 Жыл бұрын

@@philparrish6914 true

@jimb032 Жыл бұрын

Yes, but it's a waste of time. It's temporary at best. It will increase current across the rest of the LEDs and they will be short lived

@pb5640 Жыл бұрын

considering the price of these bulbs it’s not worth the fire risk.

@tkarfi Жыл бұрын

best way is solder it, this is so stupid

@suluhprabowo1275 Жыл бұрын

👍👍👍...🤝🇮🇩

@ruslanmedian5689 Жыл бұрын

LED драйвер ограничивает ток, даже, если останется лишь один светодиод, он не перегорит от якобы перегрузки, как здесь многие пишут. Нагрев драйвера возможно увеличится, и только.

@HolarMusic Жыл бұрын

the LEDs are wired in series, so the same amount of current from the regulator meant for all of them will split up between less LEDs, meaning each one will get more

@mrjoepietube 5 ай бұрын

holarmusic cleary has not paying attention enough during science class.