Putting 37s on my Nissan Xterra

Рет қаралды 2,981

4 ай бұрын

Everything you need to know about putting 37s on your Nissan Xterra!
Also how to install Apex Designs rapid deflate valves
Check out my amazon storefront where I have gathered a list of awesome gear that I personally use!
www.amazon.com/shop/conheck_o...
And be sure to follow me on Instagram ‪@conheck_offroad‬

Пікірлер: 33

@boboyamamoto 4 ай бұрын

If you link the rear end you'll probably need to run coilovers and bypass, if you run a regular shock with a regular coil, like the 4runners, you will notice a progressive loss of stiffness due to the 1k+ of constant extra body fat your X is running. Coils by themselves aren't meant to handle a lot of added constant weight where as a coilover is, the only thing a coilover lacks is the lack of sensitivity, where as a bypass helps in regulating compression and rebound throughout the stroke/travel. Probably need to cut up the wheel wells and make some new ones along with shock brackets/hoops to have an outboard setup and Frankenstein a CJD 4 link setup from a Frontier. Also probably a trussed Dana 70, rather than the titan m226 and more so for 37s. You'll just have to mess around with the yoke and propeller shaft but a drive shaft shop should figure that out easily. For shock help/setup probably ask Ben from Filthy Motorsports or the guys over at Carbon Shock Technologies since your X with the 4 link will be one of the few pioneering into that territory

@conheck_offroad 4 ай бұрын

There is an xterra local to me that is sas and linked on 40s. He owns the shop that I get all my work done. Probably gunna have them do it since they know how to do it

@amersadiq5105 4 ай бұрын

That rig is beautiful ! Keep those videos comin pls :)

@conheck_offroad 4 ай бұрын

More to come!

@oswaldoaguilar9933 4 ай бұрын

X looks really coo.

@MrMerican87 2 ай бұрын

How are people putting 42’s on ? Also what’s your opinion on SAS swap ? I don’t think I’m a do it on my X and just buy a 90’ ranger or Toyota and try it on that. I did just finish my titan upper and control arms for my X.

@everett6733 18 күн бұрын

Woah, how is the topographic design a wrap? That’s awesome

@conheck_offroad 18 күн бұрын

Thanks! I love how it came out!

@ravholly 3 ай бұрын

Dude, I’m just wanting 35’s!

@carlosizz89 2 ай бұрын

Haha need a buddy with a fronty to haul your tires?😂😂. Nice color on a sweet rig. Hows the fuel consumption now? Smiles per gallon yet haha

@conheck_offroad 2 ай бұрын

Yeah having a buddy with a fronty would be nice lol! I get about 10-12 mpg

@carsonhowalt4712 4 ай бұрын

What did they use in the front wheel well to make the black (rubber) transition piece? Looks really well done.

@conheck_offroad 4 ай бұрын

It’s all metal welded into place. They cut out the pinch seam and welded a plate in its place

@jasco1776 4 ай бұрын

Awesome setup!! Love the work you’re putting into the X👍🏼 Do your 4.10 gears run silently? About how much did it cost to regear both diffs?

@conheck_offroad 4 ай бұрын

What do you mean by run silently?

@jasco1776 4 ай бұрын

Without any gear whine

@jasco1776 4 ай бұрын

@@conheck_offroad kzfaq.info2cd8iT8pxqA?feature=shared

@conheck_offroad 4 ай бұрын

No I don’t have great whine

@chatnavz 4 ай бұрын

You regeared? I'm dying to go on 37s lol…just installed a drop bracket wit tswappd

@conheck_offroad 4 ай бұрын

Not sure what you mean by reheated

@chatnavz 4 ай бұрын

@@conheck_offroad regeared lol

@conheck_offroad 4 ай бұрын

@chatnavz oh! Yeah I’m on 4.10s

@Flying_Dollar_Motorsports 4 ай бұрын

I think they'll fit fine. As long as you never intend to turn your wheels.

@conheck_offroad 4 ай бұрын

🤣

@Flying_Dollar_Motorsports 4 ай бұрын

I legit posted that before you showed it hitting the slider. But I have 35s and can get a little touch now and then. Wasn't anticipating how close that back tire was gonna be to the front of the rear wheel well though😮. You seem to be pretty easy on the throttle like me but I'm worried for your front axles with all that unsprung weight

@conheck_offroad 4 ай бұрын

@Flying_Dollar_Motorsports I’ve yet to wheel them, but we got spares just in case

@Flying_Dollar_Motorsports 4 ай бұрын

@@conheck_offroad The wheels look awesome with that wrap. I just put new Mickeys on mine and wanted to upgrade to a bronze 18" wheel but I couldn't bring myself to spend the money. Just kept my black 16" wheels but now that I see yours, I'm regretting not just going for it. So thanks for that! Lol

@conheck_offroad 4 ай бұрын

@Flying_Dollar_Motorsports hahaha yeah the bronze looks good. These are black rhino raids. 17s