Putting plastic on your jetboat hull

Рет қаралды 108,815

5 жыл бұрын

hopefully this will show you some of the basics of putting uhmwpe on the bottom of your boat, its best to fit it when building the boat from new as its easier to make it be part of the intake
I now have a patron site
www.patreon.com/user?u=23307003
you can see some new stuff here, the first mountain bike clip , If you want to make a donation and put some fuel into the boat tank it would be much appreciated - more boating stuff to come - its not over yet.....

Пікірлер: 83

@nicktorea4017 5 жыл бұрын

This is the most comprehensive and in depth video on jet boat bottom protection yet.

@themadnes4322 4 жыл бұрын

thank you . i have been watching for sometime . you have given the best information . great vids . i believe quality time proven info . thank you GOAT .

@graham2631 4 жыл бұрын

Thanks for the advice. Nice to see a information video and not another look how great l am. Im at the card board stage figuring out size/shape gona do a full size mock up in thin ply then try metal.

@motionengineering4935 5 жыл бұрын

If you are going to plate with polyethelene please be aware that it expands and contracts quite a lot depending on temperature. For example if you plated outside in the sunshine in middle of summer the sheet would be in an expanded state, when put in cold water it will try to shrink... and more than you think! Try to apply it when the temperatures at its coldest. Otherwise its an excellent product for the purpose.

@chronicawareness9986 5 жыл бұрын

it really does shrink allot , im not talking about this application but polyethylene def expands and contracts from my experience in other things

@goatracing610 5 жыл бұрын

Excellent ,thats exactly the sort of comments that I wish more people would put up, good solid advice

@lachlanwestrupp7487 5 жыл бұрын

get it hot before you put it on then it stays tight on the boat

@tomc.6073 5 жыл бұрын

You, Sir, are an absolute manamal! Cheers,

@chrispalffy3511 5 жыл бұрын

Great stuff Goat thanks for sharing

@humanitynow1565 4 жыл бұрын

Thank you very much for the details

@paulchristian8271 5 жыл бұрын

I'm building a Wattscraft boat right now, and I got the UHMW kit with it. They are expensive, so I only got the center section covered. I was at a fab shop yesterday, and they had a stack of full length pieces that they said they would sell to me super cheap. I think I'm going to go back and get what I need to cover the rest of the hull. I'm doing videos on my build.

@mikepitcairn6888 4 жыл бұрын

Very helpful, thanks Goat

@jeffwhite9001 3 жыл бұрын

This man can build me a boat anytime.

@bdjm8595 3 жыл бұрын

Excellent video!!

@alaskadcadventures6258 5 жыл бұрын

Goatracing610 is still KING of the jet boat videos. Very good tips on how to save the boat from damage. One of my favorite lines in your videos.... "tearing up my boat since 2010 so you don't have to" made me laugh my ass off when I watch that video. Hope the plastic keeps your boat going for years to come. One question I have is where is your gas tank? The boat seems so little, and with 90- 100HP probably burning 6-8 GPH your would need 12-16 gallons US for a two hour boat trip. The black boat I think is the best handling one from just watching the videos. Thanks for the videos

@yrurags 5 жыл бұрын

Goatracing is the Benchmark of Wee Jet Dinghys! Very clean work as usual buddy....

@yrurags 5 жыл бұрын

Goat has been wasting his vacation time for us since 2010! Boy how the quality of work, boating skills and video have improved.

@mierbeuker8148 5 жыл бұрын

This video broke my speakers. I got no sound. Will that stuff protect my speakers in future?

@mierbeuker8148 3 жыл бұрын

@Darwin Dustin Yea look, you are now starting to be a nuisance with your trying to get people to download your little virus, and your extra account always immediately responding that it works so well. Reported you, and people, please don't search that term and then click on it. It is a virus!!!

@Kimbeattie 5 жыл бұрын

Wow thanks for the vid really helpful Hi from Canada

@altair7001 5 жыл бұрын

Another thumbs up form Canada here too!

@cheeseymccheese7249 4 жыл бұрын

And 3

@Ajaxaxxess 4 жыл бұрын

Just stuck UHMW to our minis with Bondit 45TH epoxy. No fasteners or holes drilled.

@Nowehi305 5 жыл бұрын

Awesome

@robertlaird6746 3 жыл бұрын

Thank you!

@renoallstate4573 3 жыл бұрын

Love the sticker

@UnitedViral 5 жыл бұрын

Where do i get a jet drive unit like you show in the video?

@jocrp6 5 жыл бұрын

I love squirt boats!

@bensimpsonnz 5 жыл бұрын

Epic video - Chur boy :) - Have you got your plans for available to buy for building the hull ?

@gerryscott876 5 жыл бұрын

instead of cs bolts have you used elevator bolts? We switched to using them to prevent the bolt head tearing through the uhmw. Our problem was material packing between the structure and uhmw forcing the 2 surfaces apart.

@goatracing610 5 жыл бұрын

Im just using ordinary counter sunk bolts as they get threaded into the plastic and the hull . Ive found that if you dont use the silicon to hold/glue everything together it will just rip the bolts out of the plastic. The silicon sticks the plastic to the hull but it also takes some of the stress/load ? of the bolts if you hit something hard

@gerryscott876 5 жыл бұрын

@@goatracing610 cool if I build a boat I'll follow your advice, nothing like tried and true

@paullangford8179 5 жыл бұрын

I thought the boat was made of plastic. But armouring the bottom with metal makes good sense if you're running over shallow water full of rocks.

@davidlarkin9505 5 жыл бұрын

Goat did you plastic weld the front centre gap & the side runners on to base sheet

@goatracing610 5 жыл бұрын

no its just silicon, that marine grade is tough stuff

@TheFtr27c 4 жыл бұрын

In south Florida We have shit load of air boats we have product called steel flex a polymer plastic that takes a beating. Question is this the same product? Thx. Awesome look boat you got

@kiwikingi1 5 жыл бұрын

Good stuff, definitely would give more confidence in the rough stuff, what's the weight difference like?

@goatracing610 5 жыл бұрын

15mm plastic with some 10mm around the front edge with all the bolts and silicon is roughly another 70 kgs of rock sliding/hitting protection - it means that if you hit anything at speed or just banging rocks all day long at the river your still going to get back home

@tip397 5 жыл бұрын

Howdy Goat. I agree with you but keep in mind you just added 70kg to your boat. The plastic wont stop those real hard hits from denting the hull. Great video, thanks.

@motormech1h343 5 жыл бұрын

Yeah but it will stop you from sinking!

@goatracing610 5 жыл бұрын

yip Ive added 70kg of shock absorption and protection to the hull - similar to the idea of wearing body armour on a motorbike -if you hit something hard it will leave a bruise , hit something with out amour on , somethings going to break. As it sits the boat weighs in at 180kg,at the moment there is no dints in the new hull and you can see some of what I put it through. I know from experience that if I was to be doing the same hits in a bisalloy or hardox hull the boat would be getting a new bottom on it by now - been there , done that

@tip397 5 жыл бұрын

@@TUGG75 I boat the same rivers, most weekends, in a similar boat. Thicker hull with hardend slipcoat. My next new boat will have plastic. Save your bullshit please.

@tip397 5 жыл бұрын

@@TUGG75 I aint your "buddy". Doubt you have any. As before, keep your bullshit comments to yourself.

@motionengineering4935 5 жыл бұрын

But has he really added any weight at all, since polyethelene FLOATS he might have increased the weight on land and actually reduced it in water.

@chack9241 4 жыл бұрын

Hey mate, great vids; thanks for the tips. A couple of questions: 1. I assume the UHMWPE needs to be folded on a large press brake. Does it need to be preheated before folding? 2. Am I right in assuming the space between UHMWPE & aluminium is not water tight? 3. What stops water wicking up the bolt threads? Do you need to apply liquid sealant to bolts &/or bolt holes before fastening together? 4. If you're tapping both the UHMWPE and aluminium then any initial air gap between the two would remain after a bolt is fully tightened (unless one of the threads strip). Why tap the UHMWPE and not just pre drill it out to 6mm? Cheers bloke

@murdocwestrup 4 жыл бұрын

4. With only 4 mm of alloy not slot to make a thread on an being threaded through will help hold it to stop the bolt spinning while putting the nut on.

@leocosta9804 Жыл бұрын

Good evening, could you give me a tip if this hull reinforcement can also be done on a jet ski, because I walk in rivers with a lot of rocks here, I'm from Brazil.

@goatracing610 Жыл бұрын

Yes a lot of people reinforce their hulls with plastic for the rivers, use 20mm and dont forget to upgrade your intake to stop the stones from going in

@leocosta9804 Жыл бұрын

@@goatracing610 Hello, but from the experience you have, you have already seen someone do this hull reinforcement on a jet ski, would you have someone who has already done it or some website or something like that that can inform me better, thank you very much for your help.

@bruntondm1985 5 жыл бұрын

Hi. I live in Tauranga and keen on a jet boat like yours. Where can I buy one?

@goatracing610 5 жыл бұрын

Id just keep looking on trademe , its cheaper to buy one of there than to buld one from new

@alexeigorelov610 5 жыл бұрын

Очень нравится ваша канал 👍👍👍👍

@goatracing610 5 жыл бұрын

спасибо, скоро появятся еще несколько видео

@gomei 4 жыл бұрын

how money jet pump,,

@MrDeanw101 5 жыл бұрын

no need for silicone. 4" spacing between bolts on the chines and around intake, 8" spacing everywhere else with 10 " - 12" in between rows.

@simonrichardson5098 5 жыл бұрын

Wher do you get the plastic from mate

@SF80CAMARO 5 жыл бұрын

Pause at 4:45 Domtar Universal Palstics?

@jadonktm5099 5 жыл бұрын

Ok that’s fair enough what about a resin or something similar so you don’t have to still holes to keep it on

@dennisferris4671 4 жыл бұрын

Yeh, I'm thinking drilling 350 holes in the bottom of my boat is counterproductive.

@nastimasto6183 3 жыл бұрын

What engine did you ride?

@goatracing610 3 жыл бұрын

yamaha gp 1200 out of a jetski

@nastimasto6183 3 жыл бұрын

@@goatracing610 Can we communicate? I'm a car electrician and I need some advice

@nastimasto6183 3 жыл бұрын

Can I use this engine? m.french.alibaba.com/p-detail/Hot-Issue-Market-Auto-engine-with-62055022374.html?spm=a2706.7835515.0.0.16883c39izkszB&__detailProductImg=//s.alicdn.com/@sc01/kf/HTB1wfMhOXYqK1RjSZLeq6zXppXa3.jpg_220x220.jpg

@dalesmth1 5 жыл бұрын

Kudos for the Trump sticker!

@user-nw4ck4eg2o 5 жыл бұрын

saund????????

@goatracing610 5 жыл бұрын

извините за проблемы с KZfaq на данный момент, у следующего видео снова будет звук

@NERPAATV 5 жыл бұрын

Вам нужна защита днища лодки как на наших аэровездеходах!

@QuantumPK 3 жыл бұрын

Translated = You need boat bottom protection like our ATVs!

@scottberry5266 4 жыл бұрын

Was a good video until I seen the Trump sticker... now it’s a GREAT VIDEO👍🏿👍🏿👍🏿👍🏿

@jadonktm5099 5 жыл бұрын

You should of used spray on stuff it’s just as good

@mikekerbs2555 5 жыл бұрын

Sauce , please Thanks

@goatracing610 5 жыл бұрын

spray on stuff makes the hull slippery only , offers no protection to the hull and has to be constantley recoated as it just wears off

@sacredovum 5 жыл бұрын

And after 2:45 mark, the political warriors got battle-ready

@dozer1642 5 жыл бұрын

ovum I wasn’t gonna look at the comments until I saw that sticker. I came for the Unhinged Trump Derangement Disorder commenters.

@altair7001 5 жыл бұрын

Nowadays, people on the Right are builders, creators, workers. People on the Left are dreamers, sheeple, destroyers. Pretty simple when you think about it.