PVC cockpit 55 F1

Рет қаралды 58,226

6 жыл бұрын

This is my Ultimate F1 style cockpit, puts you in the right driving position! Designed from scratch to mimic the F1 driving position, offers an unexpectable comfort experience.
Fully adjustable to accommodate drivers of various heights - wheel and pedals tilt adjustment and also wheel and pedals distance adjustment, from driver. Capable to hold big size tv, if needed. Beach chair type seat.
For more info about construction guidance, visit cockpit's page on my site: sites.google.com/site/pvccock...

Пікірлер: 88

@Icezakim 6 жыл бұрын

This might be my another project. AWESOME!

@ServiceProcess Жыл бұрын

Just to say, I purchased the plans for the cockpit 55 F1, Purchased all the parts as the instructions and built it. A-MAZE-ING really really pleased with it. Big thankyou. Just some things I would add from my experience. You need to add to the build instructions what sequence you should build the parts in not so bad if you use the screws method as you can undo, but with the glue (which I went for) there is no going back. But yes, to re-itterate, very very pleased with it moreso than if I had purchased a cockpit. Well done to the designer.

@estebangomar9087 9 ай бұрын

Hey, i want to build the cockpit how did you contact the creator of the cockpit because i didn't know how to do it

@UsernameInvalidsosna 6 жыл бұрын

όπως πάντα απίστευτος :)

@alfonso25959 6 жыл бұрын

Whao!

@antoniodiazhargous5279 6 жыл бұрын

Hello I would like to know in what program you create the car models, since I found them very interesting and I would like to use it for other projects

@ArisTeidis 6 жыл бұрын

Oh, I use the SketchUp (2015) + Keyframe Animation

@williamcarriere5778 4 жыл бұрын

Hi, I'm starting to consider building one of those setup and I found your video...Amazing!!! I was wondering if you were selling or giving those 3D? And at the same time if you could give me some guidance in witch setup I should build. Thanks for your help!

@ArisTeidis 4 жыл бұрын

Hi William, I sell a detailed construction guide for this and other cockpits of mine. Have a look in my site here >> sites.google.com/site/pvccockpitsimracing/home

@rokie231 3 жыл бұрын

@@ArisTeidis Hi I have made the RIG based on your model can u check this out and thanks a ton dude.!!! kzfaq.info/get/bejne/fb5zh9hhy6u1koE.html

@vesztegmate5898 4 жыл бұрын

Do you use the 10bar PVC Tubing or the 16bar high pressure? How sturdy is it if I'm building it from the normal 10Bar tubing?

@ArisTeidis 4 жыл бұрын

10Bar is good enough! 16Bar is a little better but much more expensive. If you find it at the same price, of course - prefer the 16Bar.

@vesztegmate5898 4 жыл бұрын

@@ArisTeidis thank you for your answer :) great design

@Kylosgrande Жыл бұрын

Hello, do you like this model the best for F1? The other one looks like it has more support for your legs? What F1 model is best and most comfortable? Thank you! I’ll buy on your site

@ArisTeidis Жыл бұрын

This is my best F1 model in case you don't want (or can't afford) a car seat, otherwise I would sugest better the #69F1 kzfaq.info/get/bejne/ar-kiq-Emp_XgJ8.html

@stevensmith3690 3 жыл бұрын

I'm interested in building one of these how can I get the blueprints or a guide for this build

@ArisTeidis 3 жыл бұрын

Yes! sites.google.com/site/pvccockpitsimracing/f1/pvc-cockpit-55_f1

@josearcadioparedes2237 2 жыл бұрын

Hi Aris, I would like make this cockpit but I have a question before pay for the complete guide, I hope, You can answer me. How many meters I need to make it? 18m or 1.8m? I need that information to do my budget

@ArisTeidis 2 жыл бұрын

Hi Jose, unfortunately is 18 meters and not 1,8m... It's a greedy model :) In case you fall out on the budget because of the tubes, use cheaper one (thinner). It won't make a big difference.

@xavye8922 8 ай бұрын

Bonjour, pour commencer pour cette superbe innovation que je viens de découvrir. Ma question était de savoir si vous aviez la possibilité de créer un plan PVC à partir d'un simulateur existant? Encore merci pour cette idée. dans l'attente de vous lire. Très cordialement. Xavier 🤗

@ArisTeidis 8 ай бұрын

Je m'excuse, honnêtement, je ne comprends pas ce que tu veux dire.

@xavye8922 8 ай бұрын

@@ArisTeidis il y a un modèle que j'aime beaucoup...le MonkeyDriver. Pourrais tu faire les plans pour le construire en PVC? Merci beaucoup. Je peux aussi t'écrire directement sur ton Mail en anglais si tu préfères. Bonne soirée. Xavier

@ArisTeidis 8 ай бұрын

@@xavye8922 D'accord maintenant je comprends... Je suis vraiment désolé mais un tel plan nécessiterait beaucoup de temps et d'efforts à réaliser et pour le moment j'en suis incapable. Il ne serait pas non plus correct de copier le travail de quelqu'un d'autre. J'espère que je ne t'ai pas contrarié.

@william360carmine3 6 жыл бұрын

Buenas tardes, ud podría hacer un diseño, que de modo formula1, pase a modo auto normal? Gracias

@ArisTeidis 6 жыл бұрын

Hola, ya tengo este modelo, #51 y #52: kzfaq.info/get/bejne/b72Dn5N2p52uj6s.html

@AntonRacing 4 жыл бұрын

Hello ! do you think the PVC can handle a direkt drive wheel ?! this looks awesome !

@ArisTeidis 4 жыл бұрын

Yes, no problem, I have tested it with my DD.

@AntonRacing 4 жыл бұрын

@@ArisTeidis not too much movement ?

@ArisTeidis 4 жыл бұрын

@@AntonRacing If, maybe 1-2 mm movement lateral, but it is not noticeable at all... :)

@AntonRacing 4 жыл бұрын

@@ArisTeidis i think thats the way to go ...its really a good design ....

@ArisTeidis 4 жыл бұрын

@@AntonRacing Yes, it's a good design, very close to the F1 position. If you prefer to use a car seat (which by the way offers more solid seating) I would suggest to wait 1-2 months because I'm working now on two models using car seats, one is pure F1 position and the other is a GT/F1. If You want more info, notify me at teidisaris@gmail.com and I'll send you some pictures.

@alfredoruizzavala9695 3 жыл бұрын

I just donated to get the blueprints, I hope they send me the building instructions

@ArisTeidis 3 жыл бұрын

Thank you Alfredo, just sent you!

@ryanrisley6917 2 жыл бұрын

Would 1 inch pvc piping work instead of 2 inch pvc piping since 2 inch piping in the U.S. costs around 400 dollars for the materials.

@ArisTeidis 2 жыл бұрын

No, it won't be the same result...😐

@ryanrisley6917 2 жыл бұрын

@@ArisTeidis I see why it wouldnt be the same result, it would end up smaller, thank you.

@ArisTeidis 2 жыл бұрын

@@ryanrisley6917 Correct, but except from that, the frame will be weak. Unfortunately prices for PVC tubes differ a lot from place to place. In Greece where I live, the expenses for all the materials (+ screws and clamps) would not exceed the 220€.

@antoniodiazhargous5279 6 жыл бұрын

hola me gustaria saber en que programa creas los modelos de autos, ya que los encontre muy interesante y me gustaria usarlo para otros proyectos

@ArisTeidis 6 жыл бұрын

I'm sorry my friend, I used google translator but I couldn't understand what do you mean. Could you repeat in English, please.

@rubenmex83 4 жыл бұрын

@@ArisTeidis asking what software do you use to design

@ArisTeidis 4 жыл бұрын

@@rubenmex83 Sketchup

@rubenmex83 4 жыл бұрын

@@ArisTeidis That answer is for Antonio Díaz Hargous. My question is how much is the weight limit of the person who supports your design?

@ArisTeidis 4 жыл бұрын

@@rubenmex83 I don't think there is a limit for the PVC, but surely you should use a strong fabric for the seat, in order to hold 100+ Kgr.

@weetnoggeennaam3081 3 жыл бұрын

in how many degrees is the chair and seat

@ArisTeidis 3 жыл бұрын

Hard to say as this is in fact a fabric. I can't measure this. In my new model (#69) where I use a car seat, is positioned to about 24 degrees.

@thestrenge9250 2 ай бұрын

Hola cómo consigo estos tubos que mm son? Y también cuantas cantidades tengo que sacar si no quiero el soporte de TV ?? Podrías hacer un video más largo y detallado porfavor

@ArisTeidis 2 ай бұрын

I suggest you to use 50mm diameter High Pressure PVC. More information here: sites.google.com/site/pvccockpitsimracing/f1/pvc-cockpit-55_f1

@thestrenge9250 2 ай бұрын

@@ArisTeidis Okay donde puedo encontrar las medidas de cómo hacer los cortes porfavor

@ArisTeidis 2 ай бұрын

@@thestrenge9250 On the link I sent you above you can find these information (you have to buy the construction guide).

@ronrepo8789 4 жыл бұрын

where should we place the u bolt

@ArisTeidis 4 жыл бұрын

4 U bolts needed, 2 for the pedal base and 2 for the wheel base.

@lizethsagrero6215 2 жыл бұрын

Could you give me the measurements of your prototype?

@ArisTeidis 2 жыл бұрын

Yes, go to model's webpage for more information: sites.google.com/site/pvccockpitsimracing/f1/pvc-cockpit-55_f1

@FajnyFilip2137 2 жыл бұрын

could you reupload this project? link is not working.

@ArisTeidis 2 жыл бұрын

Hi FiFoNz, the construction guide costs 20€ and you can find more information here: sites.google.com/site/pvccockpitsimracing/f1/pvc-cockpit-55_f1

@gilson2947 4 жыл бұрын

Do you have any dimensions or instructions that you could send me

@ArisTeidis 4 жыл бұрын

Yes I do. Go for more information to the cockpit's page on my website: sites.google.com/site/pvccockpitsimracing/home/cockpits/f1/pvc-cockpit-55_f1

@juanenriquefuentes6558 4 жыл бұрын

What material is the seat?

@ArisTeidis 4 жыл бұрын

Any thick fabric that won't stretch, for example awning fabric.

@fabriciorodriguez8363 3 жыл бұрын

Donde se consiguen?

@ArisTeidis 3 жыл бұрын

Hi Fabricio. If you need more information about this model, go to sites.google.com/site/pvccockpitsimracing/f1/pvc-cockpit-55_f1

@etiennebelanger767 3 жыл бұрын

I have send a donation but I dont receveid my plan. I don't think he saw that I had donated. Surely it is just a mistake. I imagine when seeing this everything will be sorted out: D

@ArisTeidis 3 жыл бұрын

Thank you Etienne for your donation. I have sent you the plans!

@etiennebelanger767 3 жыл бұрын

@@ArisTeidis Thanks a lot !!

@ghadjiquest 3 жыл бұрын

Someone have this project to downloaf?

@ArisTeidis 3 жыл бұрын

sites.google.com/site/pvccockpitsimracing/f1/pvc-cockpit-55_f1

@sinezio.rodriguez 9 ай бұрын

Tem outra opção de pagamento sem ser o PayPal?

@ArisTeidis 9 ай бұрын

Steam giftcard

@sinezio.rodriguez 9 ай бұрын

Fiz a doação

@ArisTeidis 9 ай бұрын

@@sinezio.rodriguez thank you, I sent the plans to your email!

@vinniepazzz 3 жыл бұрын

Do you have plans for this?

@ArisTeidis 3 жыл бұрын

Yes I do (for sale). More info here: sites.google.com/site/pvccockpitsimracing/home/cockpits/f1/pvc-cockpit-55_f1

@pavloskairis9994 7 ай бұрын

page not found - 404

@ArisTeidis 7 ай бұрын

sites.google.com/site/pvccockpitsimracing/f1/pvc-cockpit-55_f1

@Mark_DanielS 6 жыл бұрын

Have you built it

@ArisTeidis 6 жыл бұрын

yes, for testing purposes. (photos.app.goo.gl/dv4BpQCSbcjLfqex6)

@nerooc2578 6 жыл бұрын

Hi! I really like the project. Could you send a refreshed link to the photos, as this one probably expired? Greetings!

@ArisTeidis 6 жыл бұрын

Hi, try this: photos.app.goo.gl/zRxujh8WY8hTMT7Y6

@nerooc2578 6 жыл бұрын

Thanks! That's a really cool project. How much did it cost ultimately?

@ArisTeidis 6 жыл бұрын

It costed about 210€. (I'm from Greece and comparative a 50mm PVC Tee costs me 1,6€ and a 90 degrees elbow costs 1€). I have made a detailed construction guide. If you are interested have a look on my site: sites.google.com/site/pvccockpitsimracing/home/cockpits/f1/pvc-cockpit-55_f1?authuser=0