PVC Spiral Tree (Dimension of Frame)

Рет қаралды 63,642

9 жыл бұрын

This Tree was made with SCH. 40 1/2" PVC
To build this tree you will need:
(24) 1/2" 45s
(16) 3' Long 1/2" SCH. 40 PVC
(16) 4-1/2" Long 1/2" SCH. 40 PVC
(16) 8-1/2" Long 1/2" SCH. 40 PVC
(8) 1/2" Tees
(8) 1/2" Crosses
(8) 1/2" Caps
You will need 67' of SCH. 40 PVC
You can contact us Via Facebook at lakehelenalights

Пікірлер: 21

@jxm0290 2 жыл бұрын

What I like about your plan also is that the tree base perimeter can be scaled down just with a few simple calculations. Yours is about a 4 foot footprint and I scaled mine down to 3. Thanks again. Brilliant design.

@arctrooper2584 3 жыл бұрын

The top is made of 45's and connected super tight with 1/2 pvc then drill and screw the top to the caps.

@ScreenPrintR 2 жыл бұрын

Great job on the spiral tree and video.

@hd2kill 6 жыл бұрын

Well done

@freddychia980 3 жыл бұрын

Hi, how do you join the top part? What is the type of joint call?

@jxm0290 2 жыл бұрын

Thank you sir. Took about an hour from start to finish and the wife loves it. Now just need to figure out how to arrange the lighting.

@Lostinstarsss 2 жыл бұрын

How did you finish the top? The directions to this thing are so vague about the top part.

@jxm0290 2 жыл бұрын

@@Lostinstarsss . Still working on that. Might fabricate some type of star it something. Gotta be a little creative for that part. Could probably get by with as is also though.

@Lostinstarsss 2 жыл бұрын

@@jxm0290 Thanks Jeff! I'm going to give this a go and see if I can figure out something for the top.

@jxm0290 2 жыл бұрын

@@Lostinstarsss My neighbor across the street composed what is a multi-thousand dollar music synced LED light display with house and trees, my little PVC tree is pretty much shit at this point and may not see the yard this year. 🤣🤣🤣

@Lostinstarsss 2 жыл бұрын

@@jxm0290 OH NO!!!! That is a tough act to beat when someone goes all out like that. I'm going to try to connect 8 of the 45 elbows together with cut 1 inch pieces of pvc, then see if I can screw through the cap ends into that and connect it all together. If it works I'll let you know!

@tomsnow51 2 жыл бұрын

This is Jan 9 2022 so it's a little late to try your plans but I will consider it next Christmas. Please make a video about attaching lights. Some tree lights go around in circumference and others go vertical Thanks

@BethoHdz 3 жыл бұрын

I can't seen on the top, please, could you explain me how did you made the top?

@jandiferreira649 4 жыл бұрын

Like 👏👏👏👏

@thecovidlife 3 жыл бұрын

How did you do the top part?

@NinjaTenK 3 жыл бұрын

How many lights do you need?

@blueovalblood 5 жыл бұрын

It might say in the video, I had to watch without sound, but this is made for what length if light strings? Thank you for the video

@lakehelenalights6288 4 жыл бұрын

I took an average of 20ft folded in half to make a 10ft long strand of 100. The different lengths only determine how tight the spiral will be. I really plan on making an upgraded video here shortly

@daveneisler55 3 жыл бұрын

@@lakehelenalights6288 any pictures of it lit up? And am I getting it right that for the topper that it is just screwed into the caps?