PVS-14 Basics - Tips from Cold Harbour

Рет қаралды 45,708

2 жыл бұрын

Just got your PVS-14 but don't know what to do with it? Wondering what all the knobs do?
Looking for some more info about the device you have? Look no further.
Our PVS-14 devices:
coldharboursupply.com/collect...
Web: coldharboursupply.com/
Instagram: / coldharboursupply
Facebook: / coldharboursupply

Пікірлер: 75

@diktat6558 2 жыл бұрын

Bro when you focused in 😂😂😂

@joelapplin88 9 ай бұрын

Thanks! I watched before setting my pvs14 up!

@Giovanni-od7if Жыл бұрын

Nice breakdown and explanation of everything. Subbed 👍

@lock7852 Жыл бұрын

Thanks it really helped me out!

@MotoJB Жыл бұрын

I like the music and more-so appreciate the content. These fools that can only complain about the music need to ghost.

@nfaisnfgay Жыл бұрын

The music is way too loud

@esther12q Жыл бұрын

great video!

@mcondon23 Жыл бұрын

Great vid

@ArcanusLibero Жыл бұрын

Thanks for sharing you expertise on the product.

@5jjt 3 ай бұрын

@11:11, the adjustment that you are referring to, is does that involve simply turning the objective lens ring, or is it the more complicated step mentioned earlier in the video w/ a 0.7mm hex key? I'm asking because my vision is 2.75, both eyes, and I'm not sure if it's positive or negative.

@travislupum Жыл бұрын

I want one of these so bad I have two itt pvs7 units that work amazing

@joshuapoplin9210 2 жыл бұрын

Any information on the push in battery pvs 14’s?

@johnnyhotbody1155 10 ай бұрын

If i order the bundle with the cadex mount and live in the states will the order cancel or no?

@prank_name3126 8 ай бұрын

what material is that headgear made out of? alluminium? or plastics?

@callsignblackbeard9590 2 жыл бұрын

Hey bro like your chill informative videos

@cv8metal884 Жыл бұрын

Do you have a link to the sacrificial lense for the diopter side? I already have one for the objective lense but you had mentioned you guys sell one that doesn't mess with your fov.

@coldharboursupply Жыл бұрын

Our lens protectors work for both front and back sides: coldharboursupply.com/products/defender-nv-optics-protector

@joey2dobbs 6 ай бұрын

So what is the difference the deminst shield and sacrificial window...

@klane7 2 ай бұрын

If i tap my pvs14 l3 harris with my fingers a little hard the brightness goes to max gain and back again to my original brightness. What can cause this?

@CyberKatze Жыл бұрын

On my PVS the screw is missing and i guess the ring is turned all the way in tightly, since i can adjust the focus past infinity. Can I turn the stop ring counterclockwise to adjust it without worrying to unscrew the entire lens unit?

@r.u.sirius7423 Жыл бұрын

The objective ring set screw on my PVS14 is loose, allowing the ring to rotate some. I didn’t notice it until I mounted a COTI on my 14. That set screw is super small and takes a very small hex key. I believe he said 0.7 mil key in the video. You can purchase another set screw from TNVC if you haven’t fixed yours yet.

@user-fj3gp4dv9e 10 ай бұрын

The BGM is frustrating and it’s harder to focus on the dialogue but I did see ya plan to eliminate that. Maybe do one like this again for the hard of hearing like me

@dubstepmachine4430 Жыл бұрын

Are the PVS 14 units that you supply under ITAR? I live in New Zealand so there's a lot of issues when coming to wanting to buy night vision and it being blocked from exportation due to ITAR.

@rklkify Жыл бұрын

no they aren't because thy're in Canada

@dubstepmachine4430 Жыл бұрын

oh sweet

@HenrikSherwood Ай бұрын

Gen 3 units are under ITAR, gen 1-2 aren't

@caleblong2918 Жыл бұрын

I recently purchased a pretty hard used pvs14 at abprice i simply couldn't pass up and recently noticed that the little ring with the white dot on the diopter side seems to just move when changing the diopter setting, it's basically just freely spinning... any chance you can explain if that is a big deal or matters enough to worry about replacing? I'm new to the NV game and would like to replace any parts that need it, but also don't have unlimited funds to do so, so I'm just trying to figure out what is considered problems that NEED to be resolved... also, how would i go about testing whether or not it is purged correctly? Ive been loving watching all of your videos and glad I found your channel! Thank you for all the information!

@pizzasteakphocheeseburgeri2965 Жыл бұрын

you're fucked lmao

@Mr-mp9ur 2 жыл бұрын

I can see pvs14 working in your video. Did you turn on your device without daycap during in light room?

@reyg4918 Жыл бұрын

Great tutorial. How would you remove the FOV lenses out of the PVS 14 the objective and ocular and what tools would I need to do so? I'm trying to see if I can replace the 40-degree FOV to 51 degree. Any suggestions would be appreciated.

@roflchopter11 Жыл бұрын

Apparently the 51 degree optics are crap in terms of distortion, flare, eye relief, etc.

@ameritus9041 Жыл бұрын

eh, crap is a bit of an exaggeration from what I've researched so far. worse for an otherwise equivalent intensifier tube yes, but it's not just a blanket they're crap. if you put a really nice tube in and buy a nice lense set you will have far better clarity than a regular 40deg fov device with a low grade tube in it. I've been researching the question extensively lately since I'm currently trying to decide between a pvs14 vs an mnvd51. tnvc has an interesting white paper on the topic.

@reyg4918 Жыл бұрын

@@roflchopter11 I have a pair of 51 FOV Nobs and I have no issues with distortion compared with another PVS14 40 FOV that I own.

@lawrencerodgers9845 Жыл бұрын

@@reyg4918 are they AGM?

@reyg4918 Жыл бұрын

@@lawrencerodgers9845 Yes, they are.

@mtnride4930 Жыл бұрын

Very informative. I am looking for head gear now. What attachment should I be looking for that accommodates the J mount? When not in use I just turn the battery around is that acceptable?

@coldharboursupply Жыл бұрын

The included skullcrusher in the bag works with the bayonet J-arm. Check out our other video discussing the various mounting options. While there is internal reverse polarity protection, reversing the battery for storage is not recommended.

@mtnride4930 Жыл бұрын

@@coldharboursupply Thanks I will check it out and thanks for the tip on the battery. I don't like the skull crusher it came with so I want to find something else other than a helmet.

@thebasestrugglord9284 Жыл бұрын

Just get a helmet

@mtnride4930 Жыл бұрын

@@thebasestrugglord9284 Like I said I don't want or need a helmet. Thanks

@forestnfren8146 Жыл бұрын

i just got my first pvs14 today. I can with 100% certainty saying buying a skullcrusher for USGI style bayonet jarms is a waste of money. Mine has an insane amount of slop. Save for dovetail interface.

@endrit5885 Жыл бұрын

i cant get the retaining ring out, i got the eye cup out. But my doesnt just screw out like yours..

@nuneze23 Жыл бұрын

same

@jacobspurgeon2110 9 ай бұрын

Don’t see the rear storage cap on website, who makes it?

@coldharboursupply 9 ай бұрын

The rear storage cap comes standard on all devices bought from us, if you would like one, send us an email at sales@coldharboursupply.com and we can invoice you.

@jacoboparker Жыл бұрын

Near focus… 🤣DB in the house

@ginogomez5401 4 ай бұрын

Great info....please skip the background music next time. Hella gets annoying with the same ass chime. Everything else is fantastic though.

@vorwaerts_nie_zurueck 11 ай бұрын

Great info! Having fun with my PVS that I just received. One little thing, the background music is distracting and slightly annoying due to the short loop. maybe ditch it?

@coldharboursupply 11 ай бұрын

Thanks for the feedback, BGM is something we are moving away from in our newer vids. Check them out!

@vorwaerts_nie_zurueck 11 ай бұрын

@@coldharboursupply will do! Keep it coming💪

@0xide1 Жыл бұрын

um um um um

@sanctealphonse4510 Жыл бұрын

Dude, please... no looping rainbow music for 15 minutes straight!

@MotoJB Жыл бұрын

If the looping music bothers you, there is an easy out for you. Take it.

@sanctealphonse4510 Жыл бұрын

@@MotoJB that was a month ago, I don't even remember the music. Bruuuuuh!

@LumpyBumpyAcidFish Жыл бұрын

@@MotoJB big man on campus ready to get raped by blacks

@nfaisnfgay Жыл бұрын

@@MotoJByou good?

@BoredAmerican Жыл бұрын

@@nfaisnfgayhe is a professional meatrider

@gangplankoverboard7336 Жыл бұрын

Omg, turn the background music off!!!

@rachmathidayat7736 Жыл бұрын

This is a nvg pvs 14 made china or original? And what is the diferent between vps fake madein china with original?

@gloryrow100 2 ай бұрын

What's with the loud 70s porn music?

@joesixpack7551 2 жыл бұрын

...annnoying music

@theWadebros 8 ай бұрын

Creat your own PVs14 video. I’d like to see it.

@aesthetic8780 7 ай бұрын

No, good music.

@aesthetic8780 7 ай бұрын

But could be quieter

@jonsingleton203 24 күн бұрын

Also do not use any loctight period. Because the threads are only a helicoil in a plastic housing and you will end up pulling out the threads ask me how I know.

@jonsingleton203 24 күн бұрын

The lack of knowledge on how usefull that cap is for certain things scares me because I'm still a newbie and your supposed to be the pro