Pwrhaus MK7 / MQB 2.0T + 1.8T TSI 3rd Gen Diverter Valve Spacer Install

No video

Pwrhaus MK7 / MQB 2.0T + 1.8T TSI 3rd Gen Diverter Valve Spacer Install

Рет қаралды 24,223

Күн бұрын

Here's a general guideline and overview of how easy it is to install the new Pwrhaus MQB Diverter Valve spacer. This simple spacer gives you great sound with no downside. With it's unique slotted outlet design you get incredible audible feedback from your motor - sounds unlike any on the market. Machined anodized construction, includes all hardware for a bolt on installation.
More Info: store.blackfore...

Пікірлер: 32

@andyroo_ 2 жыл бұрын

To everyone trying to get the back bolt in on the original diverter valve, you need to click the intake housing, look up mk7 catch can install by Deutsche auto werks, that should help some of you get that stubborn bolt!

@nhelcarreon574 13 күн бұрын

Hi what part is the silver colored thing beside the ignition coil on the right side?

@jesusguajardo4231 3 жыл бұрын

Toughest installation ever..damn.. but other issue.. I'm on is38 stage 3+ and I dont hear no huuuush noise or sound? Spacer is different then a regular blow off or diverter valve? What is the main purpose of this product? Is it safe for my type of turbocharger? I need help.

@kolbyturner3690 8 жыл бұрын

how do you get the third bolt on the dv in the back with the stock hose in the way?

@hicthed 6 жыл бұрын

KOLBY TURNER do you have a solution for this? I am stuck with the same problem

@anthonyjbone 6 жыл бұрын

same

@SpikedCola 6 жыл бұрын

'18 1.8TSI - I ended up installing the dv on the spacer before installing the spacer on the car. I also had to install the rear bolt for the spacer inside the spacer before attaching the dv, because it wouldn't fit through the hole after the dv was installed. Once I mounted the spacer+dv with the bottom and front bolts, I loosened the dv so that in the rear hole the allen key would fit past the dv, and tightened the rear bolt. Then I tightened down the dv. I was able to push the hose out of the way to get the allen key into the rear dv bolt.

@andyroo_ 2 жыл бұрын

If you clock the turbo intake housing tube you can get it, (check Deutsche auto werks mk7 catch can install)

@ghislainpitre7899 5 жыл бұрын

Hows this work? Looks like dust and dirt can get in there..

@boostinmk7ca853 8 жыл бұрын

no sound clip ???

@blackforestind 8 жыл бұрын

This video is just an overall installation guideline, you can hear a sound clip in this video here: store.blackforestindustries.com/pw12eagen3di.html

@johnmalex93 7 жыл бұрын

I've had the hardest time searching for this for my car! I have a 2016 Jetta Sport 1.8t and specifically on your website under your Jetta category the one you have will not fit any 2013.5+ 1.8t's!? Help me please!!!

@tropicaljeeper8797 6 жыл бұрын

Did you find anything?

@gulfanatic 5 жыл бұрын

cannot get the back dv bolt on because the hose, any advise?

@saijack_ 3 жыл бұрын

get someone with small hands

@andyroo_ 2 жыл бұрын

Clock the turbo intake housing tube (check Deutsche auto werks mk7 catch can install)

@ismypassword1 7 жыл бұрын

What song are yall using btw?

@blackforestind 7 жыл бұрын

kzfaq.info/get/bejne/bK2iqN2Ur7DLpYE.html

@drew97989 5 жыл бұрын

installed this yesterday on my 2015 MK7 GTI and I have a check engine light! Any solutions???

@TheAirsoftVigilantes 5 жыл бұрын

If the check engine light is still on, I would take it to Advanced Auto or Auto Zone and have them do a free code scan to isolate the problem. But it could be just the sensor being weird. Put a small dab of dielectric grease on the connections to prevent shortages. I'm no expert but this is what I do when working on anything with a sensor

@jesusguajardo4231 3 жыл бұрын

Yes, just cler codes.

@TheWalterHWhite 6 жыл бұрын

Why does every car vehicle have to have a stupid electronica song playing in the background

@austio951 3 жыл бұрын

This is damn near impossible to install the last bolt for the DV with that hose in the way. Of course your video mentions nothing about the last screw 🙄

@JJJinez 6 жыл бұрын

Will this work with a performance inlet pipe (cts, spulen,leyo)?

@verdeithaca 6 жыл бұрын

I just installed this today on my MK7 GTI w/CTS intake and it fits fine. You're good to go!

@JJJinez 6 жыл бұрын

Alex Bartel mine did not worked :( i installed the CTS inlet pipe and i couldnt install the hose that connects on the inlet due to little to no space... my car is a Cupra and it has the IS38 :/ good thing is that i found a nearly new cts bov at an excellent price so i did not care too much :p