🌟✨ Get your copy of my new book “Be a Self Taught Woodworker” on Amazon now! 📖✨🌟

For those in USA they have the basic pyrography pens for about 26 or 27 usd. Works great. My walmart (I've seen these in several walmarts) has a pack of disks you can work on as well. You can get the tool and those disks for about 30 to 35 and technically have all you need for starters.

I used to do wood burning way, way back in the day when I was a kid. Cause back then, parents bought their sons tools to set fire to wood. The smell is all that I remember. Quite fondly.

I’ve watched a ton of pyrography videos, for beginners, but yours has been the most helpful! Thank you!

Just starting my Pyrography journey as of 29.3.24 after my husband brought me a kit for my birthday so finding these videos very helpful thankyou

I recently got into pyrography a few weeks ago. I got a super inexpensive wood burner from my local Walmart and some free wood from the local home depot scrap pile. The wood I got has a light of varying grain patterns so trying to do my projects that come out good has been a struggle. The soft parts of the wood vs the more harder parts. I can totally understand what you mean with the inconsistencies in the line work. It's been a good practice (to get me used to woods with different grain) and the pieces ive done on those wood pieces so far technically have only been practice but the people around me say they look fantastic even with the inconsistencies so that brings great joy. I'm also looking forward to being able to get better wood with less pronounced grain switches. Since I'm doing so good with the wood that is naturally difficult to work with I can't wait to see the results of the work I can do when it's easier wood. 😊

Greetings from Ireland. . I've started getting into pyrography, and yep I started on pine. I can draw quiet well freehand, and produced some nice stuff as a beginner . But pine off cuts from planks and I've planed them and sanded them but I now understand the grain pattern burns at varying depth of burning. You have explained things far better and straight to the point . So thank you for your information and look forward to learning more . Joe

Literally sitting here with a pyrography machine just arrived in the post so started to check out how to use it to take my turned bowls and boxes to another level. This was the best video Ive seen and given at my level so it made a lot of sense. Thank you for taking the time to create and upload such a useful video.

I use transfer paper just like this. I tried drawing straight on the wood but took much longer to get a stencil. I have been wood burning for a couple of years now. Never underestimate the use of colors added to your burns. Thanks for the video

I started off with the soldering iron type to begin with which I did a head of a labourer for a friend who just lost his dog , then I bought one that a friend made that had two pens but it wasn't that powerful so the tips had to be quite thin . I've just bought another machine that uses a thicker wire and has a digital display but only one pen so can't wait to see how it performs

I just started pyrography and I am doing birdhouses. I just want to tell you that this is the best of videos on this topic I have seen. I have watched plenty. You held my interest and for a beginner it was easy to understand your instruction. What was funny is when you said I could use a rubber to erase the carbon paper my eyes got wide. Luckily you translated, lol. Thank you for a great video, I subscribed and liked. I also ordered a copy of your book. One more thing, I sincerely like you. You give off some great vibes, nice human!! Have a blessed day!

Started a few weeks ago with a basic walnut hollow versa tool, cause I didn't want to spend a load on a higher end set up and have found I love pyrography as it is quite therapeutic for me, gives me an outlet to create. May look into a set up like you have with the 2 pens and wire nibs, as I get impatient waiting on the tool to cool before changing tips. Btw, love your mandalorian on your piece, I did one myself and the project is posted on Instagram. Keep on keep'n on. 👍

Thanks from Scotland, having done three items with a set from a German supermarket chain I have found a creative bug and planning on getting an upgrade. I like the box where you house yours for ease of storage also love Bobba Fett.

Thank you for taking the time to make this video! Ordered my 1st kit earlier and should be here tomorrow; can't wait to get started!! PS: Loved the rubber/eraser moment! :D

Love your videos. Character, personality and sharing knowledge. Came here for the Great Guitar Buildoff. Sure to stay for the quality and genuine presentation. Cheers from Canada!

I just took the plunge I'm not a drawer but what the heck you only live once. Definitely going to make that box. I like your no nonsense style and will be subscribing. Thank you.

Just bought a box type wood burner after buying the pen type first, this video is full of great info mate! Thanks!

I print using a laser printer (the kind that uses toner instead of ink) and transfer the image using a normal fabric iron on high. A little pressure and heat and the image transfers perfectly. Gotta be a little careful of warping with thinner woods. Takes a little trial and error but it's my go to.

I am thinking about giving my grandsons a wood burner set. They are complaining about being bored to death on the land my daughter just bought. This should be able to bring out the artist inside them. Thanks for sharing

Thank you for this video. Very clear and down to earth explanation. I subscribed and now will binge your videos to see what else I can learn.

Hi. I'm from Kazakhstan. You have a great job. I also recently started doing wood burning.👍

A really good presentation on pyrography. Nice and clear, filmed well, good/relaxing music in the background nice Yorkshire accent and useful tips. Thank You! :-)

Thank you for an entertaining and informative video. I bought a book and now a basic set to try this art form out. 😀👍

Good advice thankyou

I was in a big struggle with my wood. I think it was to rough. Thank you for the tips! Great work!

That guitar is sick

Finally something I've done. I can agree that it's lots of fun! Even if you are using simple soldering iron.

Impressive description, you make pyrography look 'doable'. Thank you!

Very informative & encouraging to all levels. As a beginner, yet to purchase a burning unit, it would have been helpful to see you use both the rigid tip (soldering) iron & the wire tip unit. I will look into your other videos to see if I can see the soldering iron being used...even though you sold me on the other! Great video & inspiring artwork.

You speak my kind of lingo Chris

Wow, this was great. Thank you so much for sharing this!

You really have a God given Talent

Perfect music sounds like soaking music..great video I appreciate from Alabama

Thank you for the inspirational introduction to pyrography.

thank you for the very informative video. i am going to get a Colwood burner.....and only want a few tips....which ones would you recommend? you mentioned that you had a lot but only used a small number. thank you once again for sharing your knowledge, experience, and expertise.

Recent subscriber here. You're extremely talented sir :)

Thank you!!

Very helpful! Thank You!

I love this so much. Thank you!

Love your video! Really helpful thank you! 🤩

Thanks from Canada, an international learner. I’m not sure how my “ rubber” will work. My manhood is a great handle but I hate splinters. Using it to rub carbon is a really sick idea. Lol

Terima kasih atas pembelajarannya

Thank u for this lesson.

awesome tutorial! thank you! subbed

Is this Tre Cool? The drummer from Green day?

Please can u do video using the soldering tool with tips.its a fixed heat and i cant find a video using this.i cant relate yr techniques bec im not using yr sophisticated machine.thank u

Great video ! New subscriber 👍 I actually came here hoping you'd show the burning of the mandalorian helmet ! 😬 getting a kit soon and a helmet burning would make a great present for someone I know ! Thanks for the great content 😊

New to this, enjoyed the video and found it very usful, can you give some info on the brand of machine please, as it looks very easy to use, does the brand iron and tips come with it?

Great info Chris. Loving the vids for the GGBO (teasing with that body sitting in the background 😉) All the best mate Take care 👍✌😎

Gracias felicitaciones y siempre adelante

On a rougher grain of wood, would sanding sealer help make a better burn surface?

Hi on the first wood Burning type. Do you have to unscrew the screw to allow for you to change the tip or do you just put the tip over the existing one

Thank you for this video. It was extremely helpful. Liked and sub'd.

Hi would you please guide in buying (pyrograph and wood burning tools). Which brand or make to buy as an begginer. Thanks

Try some balsa wood

Amazing thank you :) You make it look so easy! I took the plunge and tried this the other day for the first time, but burning the plywood gave off of a strong smell. Is it not toxic? thank you

I am looking to cut an oval shaped whole in a plastic bottle could this be used for that

Can you do a video showing the photo transfer to the wood?

What did you call an eraser? It sounded like Whopper. Just wondering. Never knew they were called something else.

My brother Christopher plays the guitar and I’d like to ask if his Les Paul is compatible for pyrography ? Yeah ! I’m not making it up )( his name is Chris )

I swear ive gotten to the point where I can tell if someones british by their thumbnail 😂

do you use any type of eraser to clean up the burn marks?

do you like this woodburning kit

Congratulations. These are beautiful products. I also do wood burning. I'm waiting for my page.

Any advice for ply board please

Calvary mount 👍🏻🙏

Video very informative, unfortunately I am quite hard of hearing and the background music at the beginning completely spoiled it for me. I wear hearing aids and tend to avoid videos where music is played. Hearing aids do not cut out background noise, so maybe either turn it down or better still why have it anyway?

My dad bought a wire tip burner and it came with a small bottle of oil could you please tell me what this might be for thank you

Top video

Can I just buy one type of nib/ tip instead of getting a whole lot of other type of nibs I will probably never use.

I just discovered your channel today. I would love to know how you created the box to hold your wood-burning pens and nibs.😲😃👍

Great tutorial thank you. Is plywood from a DIY shop safe to use?

What about heating the glue on plywood, wouldn’t that be toxic?

bagus sekali

Hi very interesting where do you buy those tips you just showed us🙂

What other types of wood do you suggest? You only mention plywood.

Hi there can you please tell me what pyrography machine you use and where to get it from please. Thank you Graham

Have you ever tried using the pyrography tools from Razertip? They are a company based out of Canada near where I live. They are supposed to be really good.

Good work.👍👍keep it up...

Hi great video, how is the burning kit you have like after a year of using it. Any issues? Thinking of getting one. Many thanks.

How much was the box you got there?

Can you stain the wood after the burn?

Hit ye with a sub this is the best beginning guide on KZfaq so far

if i stain the wood can i still burn on it or do i do it before the stain?

Oudo a rubber’s fine with me

nice work mate.the kit i just bought looks the same as yours but if i use it on the setting you used ,it glows red hot and smokes a lot.but i did use pine wood which i know is wrong.and the wires coming from the pens seems really warm as well...is this normal?

Wait, are you a lefty too? I have the same pyrograph, I believe it's the best of the cheapest ones on Aliexpress :) I haven't figured out using it yet, I just put one of flat, pointy tips on mine and tip started smoking on 130 I think 😬 It's a scary world for electrophobes!

Do you use stencil’s in pyrography

Carbon paper! Ha! Let me ask my grandmother if she has any. Otherwise beautiful work.

Does it work for right hand folks too? Lol

Dang man, didn't know David Cameron was so good at pyrography

У меня такой-же пирограф есть

Отличная работа!!!привет из России.заходите в гости я тоже выжигаю

As a beginner I did not find this to be helpful, because I just have the beginner wood burning pen you showed, so all the instructions you provided with your elaborate duel pen kit with adjustable heat was not helpful for me.

🥰👌

Очень круто,лайк.заходите в гости,я тоже выжигаю.

Someone English at Last

👍🏻👍🏻👍🏻👍🏻👍🏻🇬🇧Subbed👍🏻🇬🇧

why the annoying music

Helo from lombok indonesia ..👋Thanks for your info brother wish all best and many luck thank you