Slow Stick with Carbon Arrows - Details and Flight Footage // FPV

Рет қаралды 5,351

5 ай бұрын

More details on the Slow Stick Carbon Arrow (SSCA) build as well as more good weather flight footage. I am really enjoying this plane.
3D Printed Parts / Wing Plans: www.printables.com/model/7596...
* The link above contains all the recommended parts list with links.
Previous Video on the Build: • Trucking Around with F...
Running with QLiteOSD for telemetry On Screen Display: www.etsy.com/listing/12723536...
Thanks for the support!

Пікірлер: 41

@chiparooo 18 күн бұрын

Very nice build! Looks like it flys beautifully. That fpv footage between the wheels is amazing. Will this build out below the 250g weight? Thanks for sharing!

@PeterFolz 5 ай бұрын

Just downloaded all 3D files and ordered from Walmart some arrows and also landing gears, thanks for sharing

@Qromer 5 ай бұрын

Thanks Pete! Can't wait to see what you come up with!

@msd2000 5 ай бұрын

Great job putting this all together. I've started working on my kit! 🛩

@Qromer 5 ай бұрын

Awesome, thanks. I hope you post up some photos!

@deanedeane4318 5 ай бұрын

What a great set up !!! So gentle and stable !!!😉😎

@Qromer 5 ай бұрын

Thank you, I am really enjoying it.

@lordlardofframs 5 ай бұрын

Thank you so much for sharing your knowledge and experience. Brilliant video.

@cip-shopcowley1658 5 ай бұрын

Well done, thanks for sharing 👍

@TNT_FPV 5 ай бұрын

👍👍 Love that SUS

@ghsfdl4350 5 ай бұрын

cool plane. That population density is nuts though. im guessing Phoenix area?

@litl1016 3 ай бұрын

Hey awesome kit. I just purchased it a while ago and got all my parts printed and cut out. Any chance you could do a wing build video? This is actually my first foam plane build and just not quite sure how you put together the main wing. Thanks

@Qromer 3 ай бұрын

Build the left and right wings, then you join them. Use carbon rods for leading and training edges. It is similar to the Flite Test builds. I will look into doing a wing build video.

@ailtonsilva3045 Ай бұрын

Boa noite essa assa é feita de qual material, gix s minha de depron mas ficaram muito fracas.

@paulmeyer9161 23 күн бұрын

2x on a wing build video

@ernestomoralesh 5 ай бұрын

Thanks for the details. I have seen your Slow stick with aluminum square tube. Do you have the .stl? I can not find easily arrows with 7,5mm diameter.

@Qromer 5 ай бұрын

Yes, I still have the original GWS Slow Stick that came with the aluminum square tube. They stopped making them back in 2007 or so. Did you see the parts listed on the Printables site? The arrows are made in China. Make sure you are checking the outer diameter, as often they list them with the inner diameter.

@herryrachmad333 4 ай бұрын

Thanks for sharing the detail, and i will build one for, may i know tbe weight and battery size, thanks in advance

@Qromer 4 ай бұрын

The battery and hardware are listed with the STL files. The battery is a 3S 2200mAh and will give you 14-15 minutes flying.

@herryrachmad333 4 ай бұрын

@@Qromer thank a lot, happy landing mate

@lordlardofframs 5 ай бұрын

I have started my build, what is your finished flying weight please.

@Qromer 5 ай бұрын

All up weight with 2200mAh 3S pack is 980g -- this includes full FPV system, OSD, GPS. I am using a heavier foam than most as well as lots of packing tape to water proof the foam board. I am super happy with it. I hope this helps. I would love to see and hear about other builds. Please post up on Printables some photos and details of your build. Thanks!

@lordlardofframs 5 ай бұрын

@Qromer I certainly will, thank for the information

@wideyxyz2271 4 ай бұрын

❤

@chippy310 4 ай бұрын

just downloaded your plans and looking forward to building it. having trouble trying to get the wing files to open

@Qromer 4 ай бұрын

Download the PDF files... They are listed in other files section on the page.

@chippy310 4 ай бұрын

@@Qromer great thanks😊

@DavidSmith-rr8uh 5 ай бұрын

I used to fly the old aluminum body version of this slow stick with my grandpa. It was a blast and the memories will never be forgotten. I do not have access or the ability to 3D print. I know it might be a pain but would you be willing to print and sell me the parts used for this? This would be a great project to do with my son to start another generation in flying. Pretty please 🙏

@Qromer 5 ай бұрын

I wish I could, I just don't have the time. There are some good print services out there.

@DavidSmith-rr8uh 5 ай бұрын

I guess I never really thought about that. I will have to look into that. Thanks.

@lordlardofframs 5 ай бұрын

I have just purchased the files, but unfortunately there is a lot of information missing. The Wing PDF has no dimensions (it also needs to be tiled for A4). There are also no instructions i.e do you cut the arrow shaft to a specific length and what is the distance between each component i.e motor to wing spacing, CG etc

@Qromer 5 ай бұрын

Hey, thanks for the support. The PDF pages are scale 30" x 20" -- you can tile print them using Adobe Acrobat Reader -- that way you can select A4 or Letter or what ever paper you are using. You do NOT need to cut the arrows -- they should be 31" long. The distance of each component are NOT critical and but if you look at the photos and video you will see the order they go in. This is the most important part. As will any Slow Stick, you can adjust on the stick where you like them and to help balance the plane. As for the Motor to main wing... if you see in the video and photo all the parts at the front are touching each other. I hope this helps.

@lordlardofframs 5 ай бұрын

@@Qromer brilliant, thank you

@Qromer 5 ай бұрын

I have added Tiled PDF prints for both A4 and US LETTER Size to the listing.