Car Stereo Wiring Harnesses & Interfaces Explained

Car Stereo Wiring Harnesses & Interfaces Explained - What Do The Wire Colors Mean?

Рет қаралды 5,941,574

Күн бұрын

What do the colors on your wiring harness mean? How do you connect your wiring harness or interface to your stereo? We'll show you!
Full explanation on our blog: blog.qualitymobilevideo.com/ca...
Downloadable guide: www.qualitymobilevideo.com/am...
Video Chapters:
0:20 Interfaces vs Harnesses
0:35 Interfaces
0:55 Data Bus
1:30 Wiring Harnesses
2:00 What do the Colors and Wires Mean?
3:50 Wiring Harness Color Diagram
4:00 Crimping Connectors vs Soldering Joints
4:30 Using Butt Connectors - How can they fail?
5:55 Should you cut your Harness?
6:50 Solder your Wiring Harness Connections
10:12 Taping/Cleaning up the Harness to look Factory
12:00 Difference between Harness and Interface
13:45 Completed Harness. What Next?
14:00 My Radio Won't Turn on! Voltmeter Check
14:25 Do you even need a Wiring Harness?
15:00 What if you have an Aftermarket Amplifier?
16:10 Alternatives to Soldering Connections?
Parts:
Car Stereo Wiring Harnesses
www.qualitymobilevideo.com/car...
Car Stereo Interfaces
www.qualitymobilevideo.com/car...
Car Stereos - Single Din and Double DIN
www.qualitymobilevideo.com/car...
Klein Tools Crimper
www.qualitymobilevideo.com/kle...
Tesa 3/4" Cloth Tape
www.qualitymobilevideo.com/516...
Visit www.QualityMobileVideo.com for all of your car audio and video needs!
Music by Wake The Wild: www.WakeTheWild.com
Instagram: @qualitymobilevideo
Twitter: @qualitymobilevi
Facebook: / qualitymobilevideocom-...

Пікірлер: 2 000

@Qualitymobilevideo 5 жыл бұрын

Diagram/Thumbnail 3:50

@HappyHands. 5 жыл бұрын

my adapter harness did not include a RF filter. Is it worth the added cost and labor to add one?

@arronsimmons2834 4 жыл бұрын

Quality Mobile Video stock amp wiring color codes for power and speakers

@ismaelramirezjrir 4 жыл бұрын

What if your vehicle is turned off but your stereo is still on ?? And if sometimes the same stereo automatically turns on by itself when the vehicle is turned completely off

@JaylenBieber 4 жыл бұрын

I have the 7018b radio backup camera. mine's has the Orange and black wire, what does it get connected to? And it also has a brown and pink wire what are those get connected to? I think the pink is reverse for backup camera. But the brown wire, I have no idea!

@lanceherr6466 4 жыл бұрын

@@HappyHands. e. E vbbv

@sanchosanchezlol Жыл бұрын

Finally a video that actually describes this stuff instead of gatekeeping or assuming people just know it

@marissaparker4913 5 ай бұрын

Dude, I'm a tech dinosaur. The way you explain things is exactly my learning type. I can't believe that you helped me finally wrap my head around this stuff. Thank you!

@Qualitymobilevideo 5 ай бұрын

Glad to help! 👌

@danhuttinger5040 7 ай бұрын

It's always a pleasure for me to watch someone who knows what they are doing.

@Qualitymobilevideo 7 ай бұрын

Thank you! 🙌

@uglyboy4067 2 жыл бұрын

This was awesome. I just got myself an android touchscreen stereo for my rover 75 and for the life of me, I couldn't wrap my head around the wiring. Your video had it up and running in no time at all. Thanks bud.

@Qualitymobilevideo Жыл бұрын

Awesome! 👌

@frankziccarelli1724 6 жыл бұрын

One of the best instructional video's to ever appear on YT! Great job and thanks!

@lwuajiro 4 жыл бұрын

Very well explained without being over informative. Just nice and simple!.Thank you!

@Qualitymobilevideo 4 жыл бұрын

Glad it was helpful!

@jeffreyblackman5430 5 жыл бұрын

Probably the best car audio video I've seen. Very detailed and helpful! Thank-you!

@Qualitymobilevideo 5 жыл бұрын

Thanks Jeffrey!

@Sussy-hotdog 9 ай бұрын

The Atoto kit I installed was fairly straight forward for the labeling and color coating of wires. It was the 4 sets of speakers + and -, and then the ground, ignition and straight power from the battery. Thank you for your additional information. It gave me confidence and reaffirmed my installation.

@orenhaim2965 5 жыл бұрын

This is a GREAT video! Thank you :)

@staryshow 5 жыл бұрын

Informative and well explained. TQ

@johnnywayne3443 5 жыл бұрын

prime example of an exact explination. simple and straight. thanks

@davidkirby3667 4 жыл бұрын

Great video. Answered a lot of questions in my conversion to a new radio in my truck.

@matthewpeoples3766 6 жыл бұрын

Super clean work.detail is always the key to a good a job no matter what your doing.

@mark88turbo 4 жыл бұрын

Excellent video, very helpful, thank you!

@JSP-vq6jy 5 жыл бұрын

Easily fall in the "Must-Watch" category. Educative, informative and above all-accurate. Thank you and best wishes and will look forward to your future videos.

@Qualitymobilevideo 5 жыл бұрын

Thanks! Glad you found it useful!

@albertallen3366 2 жыл бұрын

A thousand videos and finally find one that works .

@SgtSam1 2 жыл бұрын

So so helpful! I’ve been installing aftermarket stereos since I was a teenager but haven’t done one in about 8 years in any kind modern vehicle. Your explanation of interface finally helped me understand what is going on these days with the wiring. Thank you!

@Qualitymobilevideo Жыл бұрын

Glad it was helpful! 👌

@oragamithunder5725 Жыл бұрын

😮

@CarlsonLipke 3 жыл бұрын

Thanks for tips! I was struggling with wires recently during installation of Raspberry PI 4 (single board computer) with OpenAuto Pro software in my car. I decided to install two separated amplifiers for rear and front set of speakers and finally have perfect sound and modern infotainment in my car!

@jessemori Жыл бұрын

Enlighten me please lol I have raspberry pi and an 07 Escalade. The only way I’ve been able to integrate them is with an snes emulator for rear seat entertainment but this intrigued me

@ast-og-losta 5 жыл бұрын

Thank you. I feel much more confident about my stereo install project

@Qualitymobilevideo 5 жыл бұрын

Let us know how it goes!

@hardrockbeat 4 жыл бұрын

Replaced everything in my truck audio wise. Didn't think I needed an amp for my component speakers. Now that I want to add one, the info on T-ing in to the harness to add am amp without rewiring was what I needed out of this video. Thank you!

@Qualitymobilevideo 4 жыл бұрын

Glad we could help!

@josephmartinez7912 4 жыл бұрын

Thank you so much for actually showing the harness soldering! Everyone else literally skips to the part after they soldered it which is useless, you saved my life! Awesome work

@Qualitymobilevideo 4 жыл бұрын

Glad it helped!

@jonathanbywater2063 5 жыл бұрын

Really superb. Thanks so much.

@Argyll1986 Жыл бұрын

100,000 thank yous. I have been struggling for a few days with a head unit install on my truck and in my daughter's car .... your video showed me where I was going wrong (how the acc. connection triggers the ON function). Many thanks !!!

@Farehaven 5 жыл бұрын

Awesome video, exactly the info I needed.

@geraldrussell7486 6 жыл бұрын

Man you do a great job of explaining and then demonstration

@Qualitymobilevideo 6 жыл бұрын

Thanks!

@adrianunda7953 4 жыл бұрын

Awesome video brother! I will try it and see how it turns out. Much appreciated.

@Qualitymobilevideo 4 жыл бұрын

Hope it helps!

@tnamen1307 4 жыл бұрын

@@Qualitymobilevideo Sir, my car SDVC function doesn't work in my i20 2011 1.2. all the other functions volume, etc. are working ok. Please show video how to check the SDVC signal wire damaged or shorted. Thanks in advance.

@dawsonmarshall7627 3 жыл бұрын

@@tnamen1307 0

@dawsonmarshall7627 3 жыл бұрын

@johnlong3885 4 жыл бұрын

I can’t imagine anyone not liking your videos. I think you’ve done an amazing job. Thank you.

@Qualitymobilevideo 4 жыл бұрын

Haters gonna hate. I think they focus on the person on camera and find things they dislike, rather than the information which is dense and reliable

@stevenviesca7924 11 ай бұрын

Thank you for being so thorough in the process. Lot of videos skim over alot.

@Qualitymobilevideo 11 ай бұрын

Glad it was helpful!

@joecraven2034 5 жыл бұрын

The best video I've seen on this topic. Nice job.

@Qualitymobilevideo 5 жыл бұрын

Thanks Joe!

@tnamen1307 4 жыл бұрын

@swwiss 5 жыл бұрын

Nice video, would like to say if you used your crimp tool correctly, the wire would not pull out, you needed to turn the wire 90º when you made the second crimp to curl the terminal joints around on themselves

@marcsongaudin8429 3 жыл бұрын

That's the best video it has been taking me two days to install my planet audio, I did everything I hoped but the radio doesn't turn on. I am still working on it. I will test those wires tomorrow.

@jerrys2753 4 жыл бұрын

Extremely helpful and clear! Now I can get my radio finished up tomorrow

@Qualitymobilevideo 4 жыл бұрын

Glad it helped!

@luzgonzalez2838 6 жыл бұрын

AWSOME VIDEO, THANKS A LOT!

@Qualitymobilevideo 6 жыл бұрын

ANYTIME LUCY!

@aponte4464 6 жыл бұрын

Lucy Gonzalez 😒

@thenet2452 6 жыл бұрын

Very good video..you explain to the point..

@nickdavis3068 4 жыл бұрын

Its going on 2020 can someone please invent just 2 to 3 wires systems

@carlosz4248 4 жыл бұрын

Nick Davis there is a bunch of plug and play wiring harnesses! They are expensive tho.

@paulweston8184 4 жыл бұрын

@@carlosz4248 No such magical plug n play harness exists for obvious reasons. You will still have to connect the harness leads from the new headunit to the leads on the aftermarket harness by crimping or soldering. Then that will plug into your vehicles harness.

@flimsyjimnz 4 жыл бұрын

The deeper into the future we go the more wires come out of the woodwork.. sorry!

@jo31b 4 жыл бұрын

@@paulweston8184 here is one www.amazon.ca/Homyl-Adapter-Daihatsu-Harness-Connector/dp/B07D4JBGJD/ref=mp_s_a_1_1?keywords=Toyota+iso&pid=bwqOVbr&qid=1578559537&sr=1-1-catcorr&vehicle=2006-76-1021-20--16---8088--1-1---4&vehicleName=2006+Toyota+Matrix

@jo31b 4 жыл бұрын

@@paulweston8184 here's another one www.amazon.ca/Homyl-Radio-Adapter-Extension-Changer/dp/B07BM7D62V

@MrCompenso 2 жыл бұрын

Great video! A level of detail that I haven't been able to find anywhere else.

@Qualitymobilevideo 2 жыл бұрын

Glad it was helpful!

@progification 4 жыл бұрын

Really helpful for understanding some of the basics! Thanks a lot for this video :)

@Qualitymobilevideo 4 жыл бұрын

Glad it helped!

@benmitchell2642 6 жыл бұрын

I've installed a basic car stereo without a harness and it took hours. The harness adapters are well worth the extra money spent

@brycedale1712 5 жыл бұрын

Ben Mitchell and you can put the stock unit back in if needed

@detox2778 5 жыл бұрын

Only if they make on for your vehicle , wont find any for mine , its a pain in the ass

@williamburgoon1834 5 жыл бұрын

@@detox2778 what car do you have

@detox2778 5 жыл бұрын

@@williamburgoon1834 a 2003 jaguar super v8 , with a premium sound system , a dumb stock amp , the whole nine yards of dimes dumbness lmao

@williamburgoon1834 5 жыл бұрын

@@detox2778 its possible but just gotta find the parts online, plastic kit harness antena adapter but yea pretty unique

@petehuskins 5 жыл бұрын

Great video mate! Clear and well paced and with none of the shouting a lot of presenters seem to do! I personally hate crimp connectors and always solder (using a liquid cleaner/flux ) beforehand), but thank god for "heat-shrink" such amazing stuff!!!

@Qualitymobilevideo 5 жыл бұрын

Thanks!

@andreanarafanan1016 5 жыл бұрын

What color does a Town and Country 2004 Chrysler for dual radio connector to the blue and what color is the coming from the stereo from the car

@andreanarafanan1016 5 жыл бұрын

Need to know if my dual radio to a 2004 Town and Country Chrysler wiring what color is the wiring coming from the car car stereo in to the radio

@brickcity9mm896 Жыл бұрын

That's because you're a doeeb

@JackieMorgan-jm8pv 6 ай бұрын

@@Qualitymobilevideoback off

@arturomorales4654 5 жыл бұрын

Good job Bro. Very professional!

@JesusHernandez-kx1nj 2 жыл бұрын

My guy, thanks to you I finally have a new stereo. Thank you ! 😁

@Beaver.17 6 жыл бұрын

great video. Amazing music!!

@rickwilliamsjr.4003 5 жыл бұрын

while i agree solder and heat shrink is the best connection, the butt connectors will not fail if installed correctly and you arent swinging on the harness. i also advise slide heat shrink over the wire before stripping to prevent strands from folding back

@BucketList22 2 жыл бұрын

Amen

@maximusmeridius1272 Жыл бұрын

A very solid video for us beginners out here. Well done.

@monkey555500 4 жыл бұрын

great video clearly explaining what i need to know,thanks

@Qualitymobilevideo 4 жыл бұрын

@randallsimonsen1907 Жыл бұрын

Good advice. I would argue about useing the wrong tool to crimp, try a ratcheted model that crimps two points at the same time against a third, if you find you must buy tools dont, just use the butt connectors with solder in them and heat with a disposable lighter or even a hair dryer, this also eliminates the need for any added tape as the outer silicone shrinks and is far better, not to mention it is very easy to use even for someone who has never solderd.

@Gglsucksbigballz 4 жыл бұрын

Would have like to heard more about remote amp turn on vs power ant. If it’s trivial and you can use either or when to use which. Great video!

@magic8053 2 жыл бұрын

You can use either, but some don’t have a power antena wire

@magic8053 2 жыл бұрын

@A. Melbs Im no expert but Power antenna is for when the radio is on so if your radio turns on at just the turn of the key then it gets 12v power, remote amp turn on is from the head unit and is made for an amp

@wooo297 Ай бұрын

i get no sound for bluetooth or apple carplay after, only from radio stations after amplifier install connected maybe to antena wire , instead of power on so they made the wrong connection take it back to the shop or do it myself

@ajhawk2908 3 жыл бұрын

Amazing job man! 👍🏼 Thank you!

@kevokell1 5 жыл бұрын

To sum up this video in one word... Excellent! From the presentation thru to the editing...clear and concise...I'm now a subscriber.

@Qualitymobilevideo 5 жыл бұрын

Thanks!

@gregbrady8454 Жыл бұрын

Butt connections are perfectly fine dude. Relax

@the1tfactor 6 жыл бұрын

Clear and comprehensive video, thank you very much. I just got a little confused by your brief explanation about aftermarket amplifier connection. I have a 2005 Ford Focus ZX3. Just got a Pioneer AVH-1300NEX. I have a 4-channel Alpine amp I want to use. My plan is to take the RCA Pre-outs back to the amp, and run the speaker leads back to the front. I THOUGHT I heard you say I would not make the connections between the Ford Harness and the Pioneer harness for the speaker leads, but would wire the speakers to the Pioneer harness. Not to the Ford harness? How can the speakers connect via the aftermarket unit if those connections are not tied into the Ford harness in any way? Or is the Ford harness the primary, just passing the signals through to the aftermarket harness? I may have been thinking of them in reverse. I'm sure I am wrong in my thinking, not you in your presentation! Thanks for the great work.

@the1tfactor 6 жыл бұрын

Hah, never mind. Searched your videos and found this: kzfaq.info/get/bejne/mrqIZN15zMezo30.html

@jimmystockwell7669 5 жыл бұрын

Tanya Robinson Is to

@garrynutter860 5 жыл бұрын

Great video, Gave me the basics to attack my Suzuki to Pioneer. Thanks.

@Qualitymobilevideo 5 жыл бұрын

Nice!

@christopherhereford1803 5 жыл бұрын

Thank you for sharing! That was very informative.

@Qualitymobilevideo 5 жыл бұрын

Glad it helped!

@domanater480 4 жыл бұрын

Jesus, aftermarket head unit sure is looking good now....

@RKM-mi1cg 5 жыл бұрын

The best online explained video ever. Can't find better. Yet I'm struggling now to understand how to connect a new mp5, GPS radio. It's for my Nissan qashqai 2008 model. I had a standard radio Bluetooth cd player inside before. I removed it. Any chance of me asking for help? And you helping? What i require is a diagram or images to show me what to connect where. Is it possible for me to send you images of what I have. Then maybe you could understand what I'm talking about. Or is that not possible.? Either way. I would really appreciate your response and know how. Your's hopefully Mr R K M.

@michaelpeake979 5 жыл бұрын

Rashid Majid .

@zz12345aaa12345zz 5 жыл бұрын

nice try bro lmao

@phillys2k 10 ай бұрын

This was broken down so well ! Thank you!

@PierreMichael2020 2 жыл бұрын

Even if this video is from 2017, you are still helping people like me... thank you so much for this excellent video. I will lookup your other videos, thanks again.

@Qualitymobilevideo 2 жыл бұрын

We tried to make and probably did make a decent video.

@xxpandagachaxx3899 6 жыл бұрын

I am installing a Pioneer FH-X730 BS in a 2006 Lincoln Town Car with steering wheel control. I am using a Maesto SW interface controlor. On tne plug there is a red/blue stripe wire thst is markd"SWIT-in . where does this wire connect to the wiring harness?

@robertlackey9742 6 жыл бұрын

Maya Playz I'm installing the same stereo in my ex state patrol car, crown vic police interceptor, 2010. Everything works great except I have no wipers, any ideas?

@rf1331 6 жыл бұрын

This was so clear-exactly what I was looking for! Great video man! btw anyone know what music's playing around 8:10?

@Qualitymobilevideo 6 жыл бұрын

Made by a band called Wake The Wild! Look them up!

@rf1331 6 жыл бұрын

Quality Mobile Video thank you! Btw this video helped me finally hook up my stereo, so thanks again? ✌🏻

@GOAT86STUDIO 4 жыл бұрын

Thanks a lot! I was thinking of learning this。

@Qualitymobilevideo 4 жыл бұрын

Glad it helped

@adrn8400 5 жыл бұрын

Best explanation!...very well put together video...absolutely full of information on every issue when upgrading

@Qualitymobilevideo 5 жыл бұрын

Thanks!

@toneytone7497 4 жыл бұрын

Overkill..Ha!! More like Quality!! 🙏Very nice

@Qualitymobilevideo 4 жыл бұрын

YUP

@Ppp-kk6hw 6 жыл бұрын

What happens if you don't have a car or a stereo

@Ppp-kk6hw 6 жыл бұрын

Only kidding thanks big man. Dink dank do. Bolton thing

@Qualitymobilevideo 6 жыл бұрын

Lol anytime

@wesker877 6 жыл бұрын

Ppp just sit in silence.

@Playboifresh251 5 жыл бұрын

I have a 2012vw jetta SE I want to hook up an inline converter what colors are the rear speakers.

@IndianJS 5 жыл бұрын

😂😂

@markswasey4301 3 жыл бұрын

Awesome, thank you for explaining what each wire does!

@Qualitymobilevideo 3 жыл бұрын

Glad to help!

@manut3998 5 жыл бұрын

Thank you so much you give me the guts for trying to connect my car stereo and it works ! :)

@Qualitymobilevideo 5 жыл бұрын

Heck yea!

@Handler4071 3 жыл бұрын

imagine finishing soldering them all up only to find out that you forgot to slip in some shrink tube.XD

@alexstoubis890 3 жыл бұрын

happens many times if you ask me! :P

@EstebanMenchacaGamboa 3 жыл бұрын

Just happened to me!

@ambrosiopintojr.2111 4 жыл бұрын

thanks for that wonderful explanations...good job sir...👍😃

@airborne2876 5 жыл бұрын

Thank you! This cleared up a lot.

@Qualitymobilevideo 5 жыл бұрын

You're welcome!

@AJAviator 2 жыл бұрын

When soldering, staggering the connections will reduce a big bump in the harness where all the connections are, it's a bit more fuss, but could be useful, and look better.

@Qualitymobilevideo 2 жыл бұрын

Excellent point!

@garyphan7852 5 жыл бұрын

Is there anybody can help me , I have 2004 Lexus RX330 , one of the CD player stuck , thank you

@MegaE46 4 жыл бұрын

Gary Phan my SC430 used to do that. You just have to keep hitting eject like nonstop or keep holding down the load button if it’s a multi-disc

@johnpaulenderpalmer8811 4 жыл бұрын

@@MegaE46 cool ugit ut

@kevintaylor5682 3 жыл бұрын

P ll

@ramprasadgopalan6377 3 жыл бұрын

Very informative and methodical, this is how an informative video should be done. I highly appreciate you sharing your knowledge. Thank you

@Qualitymobilevideo 3 жыл бұрын

Glad you enjoyed it!

@nolove4442 Жыл бұрын

Thank you thank you so much, I’ve been trying all day trying to figure out what color is what, my first time hooking up my system and running a stinger 9 conductor wire. Running 4 kicker DS for the 4door speaker and running a 8” sundown neon and (2) 6.9 sundowns on a 5channel amplifier. This video just helped me finished my set up. Much appreciated.

@Qualitymobilevideo Жыл бұрын

Great to hear!

@HappyHands. 5 жыл бұрын

I don't think the inventor of the but connector designed them with the intent of using them for mountain climbing or car towing or for any heavy pull load of any kind :)

@harrylambrakis2213 5 жыл бұрын

exactly lol

@hawkboy000 4 жыл бұрын

For real. The damn wire is gonna sit there behind your dash.

@niggamany 2 жыл бұрын

@@hawkboy000 🤣🤣true

@sakhralhadi 5 жыл бұрын

Thanks a lot for the nice video but please next video reduce the background music it is very very annoying

@christmaslights9870 Жыл бұрын

You really just saved my bro and I a lot of time and money. Thanks for that! Amazing video 💯

@BFC442 Жыл бұрын

Thank heavens for good people like you 🤗🤗

@OfficialEnterprises 5 жыл бұрын

3:50 for the thumbnail picture....

@tomjohnson1110 5 жыл бұрын

Nah, still as confused now as I was when I started watching the vid.

@Qualitymobilevideo 5 жыл бұрын

What are you confused about Tom?

@tnamen1307 4 жыл бұрын

@@Qualitymobilevideo which wires is the wire for SDVC function wire?? Please help how to locate that wire on your video.

@wapartist 4 жыл бұрын

That soldering rig is insanely awesome!

@Qualitymobilevideo 4 жыл бұрын

Thanks!

@armanifaysal2783 5 жыл бұрын

Good information thanks

@MrJohn324 5 жыл бұрын

Of course butt connectors are gonna fail if you use that much force to separate if you do it right it will last

@kingcarcas1349 6 жыл бұрын

Just don't have any1 tug on ur butts

@vinibomsabor 5 жыл бұрын

Thank you!

@d.3540 5 жыл бұрын

Thank you great men

@youtubecommenter65 9 ай бұрын

Great video! I do have one question, though. In newer vehicles where the factory radio is able to detect whether or not the car is in park before allowing you to perform certain tasks, would it be possible to have an aftermarket radio communicate with the gearshift to do the same thing, at least in some cases, or would tapping into the parking brake wire still be required like in older cars? For example, in some Hyundai Tucson models, the factory radio will not allow you to pair a new phone to Bluetooth unless the car is in park.

@djizzal20 Жыл бұрын

This video helped me hook up my radio for the first time. Thank you

@DayTrader__ Жыл бұрын

Dude, you’re are bad ass! Ty for this. So quick and to the point!

@Qualitymobilevideo Жыл бұрын

👌

@alexaderreyes5945 4 жыл бұрын

Very professional good tutorial thanks

@EN_autoblog 3 жыл бұрын

Very thorough. Thanks.

@opal386 3 жыл бұрын

This video is the most informative and educational on this subject. Thanks a lot! I have a question on the steering wheel control unit and parking brake by-pass. I have a 2005 Lexus ES330, and try to change the factory radio to aftermarket one, do I really need the steering wheel control unit and parking brake by-pass?

@ahaaguayo Ай бұрын

Amazing, pretty good explanation dude. Thanks!

@zakkrick 4 жыл бұрын

Super helpful thanks

@josel.dominguez6747 4 жыл бұрын

Amazing nice and clear and well explained video, thanks for sharing regards.

@somatra52 5 жыл бұрын

Very informative. Can you make a video on how to properly installed an android aftermarket head unit that has a CanBus and also requires a Fiber optic decoder box to produce sound .

@brianblack2591 Жыл бұрын

very well done. hard to find anything about the right wires. very helpful. thank you

@Qualitymobilevideo Жыл бұрын

Glad it helped 👌

@cupcake6830 5 жыл бұрын

Dude! I love your presentation style!

@Qualitymobilevideo 5 жыл бұрын

Thanks!

@nomomomomomom6916 4 жыл бұрын

So good video, all well explained. Very good job, Thank You

@Qualitymobilevideo 4 жыл бұрын

Glad it helped!

@randyrawdingii5135 5 ай бұрын

Thank you, sir. I'm installing an interface, aftermarket stereo, 2 amps, spare tire sub, Hertz processor and 3-way components in an '06 IS250. So I have a few wires. Not my first time but my first time doing it RIGHT/in 15+ years, so THANK YOU. Goin' after that SQ baby!