Choosing which firmware to flash to your Quansheng UV-5R, UV-K5, (8) or UV-K6 Comparing Egzumer and IJV MOD
Пікірлер: 213
@jj32665 ай бұрын
Egzumer scans on whichever is highlighted A or B. Plus program your own preferences with a short press of #1 & #2 under ptt button and also a long press.
@m7frs2725 ай бұрын
You are 100% correct, Thanks for highlighting this 👍
@karinchaney1014 ай бұрын
Thankyou for a thorough review, I know this takes a lot of time and it is appreciated by those of us who are new to all of this.
@m7frs2724 ай бұрын
Thank you and thanks for watching, glad you found it helpful 👍
@neilwww14 ай бұрын
How did you go with firmware update? I've just received mine and having trouble with data not being transferred even though the radio is connected and detected via the com port.
@MatthewJohnCrittenden5 ай бұрын
Straight to point(s), have a sub. Sticking with Egzumer for now, you've saved me the time trying IJV. Great little gadgets and appreciate all the community effort to improve them.
@mertklck3 ай бұрын
Hello, which firmware works more stable?
@MatthewJohnCrittenden3 ай бұрын
@@mertklck Latest one is rock solid. Not had any issues flashing or using any version.
@mikegriffin5645Ай бұрын
IJV 3.14 is the best firmware out there, Egzumer is dead, zero development on it ...
@moisesalvin80295 ай бұрын
Tried IJV for quite sometime, I like the single line mode wherein you can input "ANY" frequency with no issues, love the "gain", but , I agree with the side buttons shortcuts of Egzumer it is a life saver plus the awesomeness of having a spectrum analyzer, will wait for the updates from IJV. Thanks for the vid Ben!
@buddypage115 ай бұрын
Very helpful and timely. Had mine about a week and ready to dig out my old programming cable and install the Egzumer FW. Was exploring the UVMod site, using the firmware patcher to generate a version. Comparing the UVMod to Egzumer and others would be very helpful too. Thanks. Subscribed.
@m7frs2725 ай бұрын
Glad you found it useful and thanks for the Sub 👍
@TheBillyfarrell5 ай бұрын
Thanks for that, I’m currently using the egzumer and think I’ll stay with that for now. Great help 👍🏻
@m7frs2725 ай бұрын
Thanks for watching, glad you found it useful 👍
@DonzLockz5 ай бұрын
Great comparison video in detail on important stuff. Its very cool that these can be modded. I wish all radios could be modded with custom firmware.🍻🤠
@heinerrambold88895 ай бұрын
I like the display color in the ijv, but prefer the battery indicator, scanner and some other things in the egzumer. Well explained Ben, thanks a lot!
@m7frs2725 ай бұрын
Just to clarify, the display colour is specific to the model of radio (UV-5R = blue and the UV-K5 (8) is orange) Thanks for watching 👍
@heinerrambold88895 ай бұрын
Thanks Ben!
@petercarter90345 ай бұрын
Just ordered my K5 from AliExpress just trying to get my head around the firmwares, looks like its going to take me a while, just as well I'm retired !
@guidelineuk48763 ай бұрын
Thanks ben all I needed to know an more .. clear precise no fing about TOP JOB
@m7frs2723 ай бұрын
Thanks, glad you found it useful 👍
@SheffieldVince-2E0NZS5 ай бұрын
Just ordered this UV-K5(8) now. Total price of £12 something after tax. Thanks for doing some explaining here fella, it will come in very handy.
@m7frs2725 ай бұрын
Glad you found it useful, cheers 👍
@PaulMc-qn7iv5 ай бұрын
Send us a link lad !
@andyhopkinson27085 ай бұрын
Any link
@sgtclubba17325 ай бұрын
With egzumer you can program the side buttons eg F1Short, F1Long F2 etc. Its handy to change Mode by allocating 'Switch Demodul' to either F1 or F2 buttons.
@acestudioscouk-Ace-G0ACE5 ай бұрын
Thanks for making this video, I have a pair of K5s and your information is going to be very useful.
@m7frs2725 ай бұрын
Thanks for your comment, glad you found it useful👍
@TheBlackn1ght5 ай бұрын
Thanks I always saying what mod is the best so you did (help me) keep up the good work I got egzumer is on my radio ( thanks again good video)😊
@m7frs2725 ай бұрын
Thanks for your comment, glad you found it useful👍
@qslradio292Ай бұрын
Great video, thank you for the demonstration of each firmware 👍
@m7frs272Ай бұрын
Thanks for watching, glad you found it useful 👍
@yorkshiresfinestpair5 ай бұрын
Great video thanks! Im still undecided on which firmware i want to run as each one has good and bad points to them at the moment ive got IJV on mine.
@denniscrowley85175 ай бұрын
You Sir, are the Man.! Thank you for your time and effort. Peace from Texas
@m7frs2725 ай бұрын
That's very kind! Thanks 👍
@petrol884 ай бұрын
Howdy (also in Texas, in a town with your last name) Which one did you go with?
@karlschneider83653 ай бұрын
@@petrol88 He says that he preferers the Egzumer in the vid, im pretty sure
@jurgengunthner76832 ай бұрын
Thank you. You saved me a lot of time and efford. I will just use the radio as a scanner and not transmit. Over here in DL we have very strict rules about spurious emissions. 73s
@m7frs2722 ай бұрын
Thanks for watching, glad you enjoyed it 👍
@kjbathe5 ай бұрын
Thanks for putting this together
@m7frs2725 ай бұрын
Thanks for your comment, glad you found it useful👍
@steves79735 ай бұрын
I've bought expensive radio scanners and never received a firmware update. I bought a £15 Quanshang and get regular firmware updates for free, wow ! You can't beat that, I'm just waiting for what Quanshang is going to follow up with next, a digital model ?
@m7frs2725 ай бұрын
Who knows! Thanks for watching 👍
@thefitnessinstructor89372 ай бұрын
oh jesus a DMR quansheng would legit crater the entire market. that's a weapons-grade deal. i'll buy 20 on launch
@DonzLockz2 ай бұрын
Superhelpful, thanks Egzumer is the one for me to try first. ;)
@m7frs2722 ай бұрын
Thanks for watching, glad you found it useful 👍
@richardevans59215 ай бұрын
Well done Ben, another well demonstrated Video, I personally prefer Egzumer.
@m7frs2725 ай бұрын
Thanks again Richard 👍
@starcityofva5 ай бұрын
Thanks for the video. Subscribed and liked. I have a k5(8) on the way this was great info. 73s
@m7frs2725 ай бұрын
Thank you!
@LightBlazeMC5 ай бұрын
Needed this vid thank you
@m7frs2725 ай бұрын
Thanks for your comment, glad you found it useful👍
@DM-fz3ly5 ай бұрын
excellent video comparison!
@m7frs2725 ай бұрын
Thanks for watching, glad you enjoyed it 👍
@19TC5045 ай бұрын
its also happends when you use the ijv filmware when you start scanning it start scanning on the frequentie you didt selected,same with transmit it transmit on the frequentie you didt select
@psynurse5 ай бұрын
Finally a comparison
@m7frs2725 ай бұрын
Thanks for watching 👍
@johnstockwell83225 ай бұрын
Great review 😊
@m7frs2725 ай бұрын
Thank you 👍
@natalie12b4 ай бұрын
Hi thanks very much now I know to use Air band
@m7frs2724 ай бұрын
Thanks for watching, glad you enjoyed it 👍
@steelgtr5 ай бұрын
EGZ FW: When I cycle bands I don't get 10m or CB? Starts at 50.0000?
@DitoZBR3 ай бұрын
Please, add in the vid description the versions of both firmwares you have used. Cheers!
@emavideo20 күн бұрын
which firmware will give me the SSB and DSB (Single sideband) function. Or iis that only with the iJV?
@FJBandtherest5 ай бұрын
Do you know if this firmware works on Baofeng in the States? They look the same. Where do you find these modded files?
@ExploringWithJason4 ай бұрын
Doesn't the Egzumer have that "secret menu" when you press ptt and the button underneath when you turn it on and you can unlock transmit on all frequencies?
@m7frs2724 ай бұрын
Yes it does and I've demonstrated it in this video: kzfaq.info/get/bejne/Y81nms-IqrzUlKs.htmlsi=SOIp3R6Wr8QGmVb2 However it's highly recommend not to TX on frequencies that the radio isn't designed for. See this video as well: kzfaq.info/get/bejne/eKtijJqHl9qrfYE.htmlsi=JRUo_Tx9IZkF9iiP Thanks for watching 👍
@wisteela5 ай бұрын
Great guide. I'm going to be buying one of these radios, so I'm looking for as much info as possible. Subscribed. 73 M7TUD
@m7frs2725 ай бұрын
Thanks for the Sub & for watching 👍
@smithers139Ай бұрын
Thanks for that as new Ham very useful video M7GAU 73s
@m7frs272Ай бұрын
Glad you found it useful, thanks for watching 👍
@bulldozer06124 ай бұрын
great comparison, thank you very much! What settings do I have to make to See the channel name and frequency in channel mode? If I remember correctly, only name or frequency is possible with my ezgumer FW...
@m7frs2724 ай бұрын
Thanks, and glad you found it useful. Hopefully some of my other videos may help with your question: kzfaq.info/get/bejne/ocBhnJqKtZaZmIU.htmlsi=dU2gxUc1GeV6Hnre kzfaq.info/get/bejne/Y81nms-IqrzUlKs.htmlsi=rFTtAE_wwTtrrfKS
@humaxf15 ай бұрын
Helpful comparisons. When programming with chirp, which make and model do I need to select read/write? Thanks
@ElMareTV5 ай бұрын
Quansheng, UV-K5, check the correct COM-port
@m7frs2725 ай бұрын
You'll need the latest version of Chirp and Select Quansheng and UV-K5
@michaelmilenkoclewes5724 ай бұрын
Mine does tx on am. Perfectly 2 watt dead key 5 swing
@truculenttabasco5 ай бұрын
What is the "bandwidth" setting for? (Narrow, wide, wide+, etc.). Are these just channel widths? If so, how do you determine the appropriate channel width for a certain frequency?
@m7frs2725 ай бұрын
Yes it's the width of the channel/frequency. Generally most FM transmissions, ie: Ham, Marine, PMR 446, GMRS etc are narrow FM.
@VK3TWO4 ай бұрын
I'm curious as to why you refer to it as E.G.Zumer vs egzumer? I prefer the usability of the egzumer over IJV.
@m7frs2724 ай бұрын
Hi, it was just habit as that's what some others were initially calling it initially. I stand corrected 😉 Thanks for watching 👍
@daytona12122 ай бұрын
The CEC firmware let's you transmitt APRS and SSTV. Also nice firmware.
@m7frs2722 ай бұрын
Yeah I do like the CEC firmware. I've done a separate video on the SSTV operating: kzfaq.info/get/bejne/n650pLCVyce6eKM.htmlsi=6R1QMcXH19L1G9uv
@daytona12122 ай бұрын
@@m7frs272Thanks, I will try and find it.
@user-il7hs7sh7g4 ай бұрын
IJV mod has an issue when using DSC, doesn't receive, it transmits fine.
@maciusexe60335 ай бұрын
what does the PS or DWR mean in EGZUMER
@petrok1rp2543 ай бұрын
CEC firmware sounds to be best to me.
@ElMareTV5 ай бұрын
Hello Ben, great video. I have one question. How did you save the CB radio frequencies on the device? I tried this via CHIRP but I always get the error message that the frequency is not supported. Can you help with that? Thanks in advance.
@sylenzyostampa5 ай бұрын
You must unlock from chirp setting/driver information/
@Ratchet_effect5 ай бұрын
There is a few ways to do it, I don't want to step on young Ben's toes, so best he explains it, or a possibility of a video showing how maybe? 🖖
@ElMareTV5 ай бұрын
Thank you, this works@@sylenzyostampa
@m7frs2725 ай бұрын
@@ElMareTVGlad you got it working. Thanks to the great community on here 🙏
@DK-pb4ye3 ай бұрын
@@Ratchet_effect Can you elaborate? I have been searching for 2 days and these comments are the only mention of fixing this other than an old dev conversation from a year ago about a different firmware. Any help is appreciated!!
@malcolmthompson4505 ай бұрын
Tried a few versions of IJV and really like the single channel screen BUT I have found an issue with all versions. Power settings are not read properly from the code plug - import from CHIRP and all High power settings show on screen as Low - change power level on radio to show High when downloaded to CHIRP they show as Low. This is a major issue. Also there are no contact details to report the problem.
@m7frs2724 ай бұрын
Thanks for watching and commenting. We have to remember that all of the 3rd party firmwares are developed and shaed for experimental purposes by individuals who create them in their own time, some of whom are on the social media pages such as the Facebook forums etc..
@rrobert1495 ай бұрын
Quansheng UV-5R plus egzumer firmware ?
@YlmazDALKIRANscallion26 күн бұрын
Thanks!
@m7frs27222 күн бұрын
Thanks & Thanks for watching 👍
@themagnushjort5 ай бұрын
Is it possible to have tx blocked when you're out of the stock frequency range while still allowing you to listen to all the frequencies?
@m7frs2725 ай бұрын
Yes, If you checkout this previous video at 29 mins I show the hidden menu 61 (on Egzumer) where you can select what you like: kzfaq.info/get/bejne/Y81nms-IqrzUlKs.htmlsi=3zrvCP8W317W4N7n
@themagnushjort5 ай бұрын
@@m7frs272 Awesome, thanks!
@3qdxАй бұрын
Do both models have the Egzumer firmware Spectrum Scope? I've only seen it on the yellow UV-K5(8) screen model, but I prefer the blue screen UV-5R PLUS model so I wondered if the Scope will work on it also. Thanks.
@m7frs272Ай бұрын
The UV-K5, UV-K5(8) and the UV-5R Plus are all basically the same radio just cosmetically different, so yes you could have the Egzumer firmware with spectrum scope on the UV-5R Plus with the blue screen.
@manowarm1685 ай бұрын
UVMOD the best
@georgebarbaris44953 ай бұрын
Great video Ben i would like to ask you which firmware transmit at 27 am fm usb ? every time i have reinstall configuration and calibration or just flash any firmware I want thank you
@m7frs2723 ай бұрын
Unfortunately it's not possible to get it to transmit correctly on 27Mhz in any mode (FM, AM or SSB) The radios internal amplifiers are only designed to work within certain VHF and UHF frequencies. Although Unlock TX in the firmware will give out a few microwatts (not even milliwatts!) On 27Mhz the rest of the RF power will come out at much higher power on various VHF frequencies. See my other video: kzfaq.info/get/bejne/eKtijJqHl9qrfYE.htmlsi=b0fyKPd3xYljOYg1
@georgebarbaris44953 ай бұрын
@@m7frs272 Thank you for your time and your nice videos!
@buddhistsympathizer11362 ай бұрын
These radios are wholly unsuitable for transmitting on 11 metres - Get a different radio for this purpose.
@smithers139Ай бұрын
Can you provide some links where to download from please ?
@Conte19763 ай бұрын
Greetings from Greece! Could you please provide me a Valid Link for the Latest Version which I think is the IJV mod v2.9r5. Thank you!
@Darkwoods773 ай бұрын
Hi Ben,quick question.. if I did the firmware upgrade, would it be able to receive ssb on 2 meter vhf? Thanks Jack
@m7frs2723 ай бұрын
Hello Jack. Yes it would. With Egzumer it will receive USB and with IJV MOD you can receive and TX on double side band.
@user-uf7ws1ot9o3 ай бұрын
So what’s the real distance from handheld to handheld how far away can you get from each other with it and how about in a 10 story building will work inside the building from downstairs to 10th floor?
@m7frs2722 ай бұрын
Hi, it would really depend on the construction of the building and any local RF interference within the building, but it should be fine. As for distance, that really depends on the terrain. In open air and line of sight I'd imagine about 5 miles on VHF.
@Bartok_J3 ай бұрын
One of the first things I noticed when I did the Egzumer v0.22 upgrade: the option to select a decent length for the backlight to stay on. The original firmware only allowed a maximum of five seconds. ☺ I flashed it with Microsoft Edge (not Chrome) and it worked fine. I've played safe and set it to tx on amateur bands only. An observation is that mine won't tx in USB - I just get an error message. I hoped I might be able to use it for 2m SSB. :-( Thanks for putting this up! ♥ Mark GØOIW
@m7frs2723 ай бұрын
Hi Mark, thanks for watching and glad you enjoyed it. Try the IJV MOD firmware, as that will allow you to TX on DSB (double sideband) on 2m
@LeHunkyDory3 ай бұрын
Hey, just an noobie here. I found an online patcher that allows me to play around with some more tx options but none to lock on amateur band only, I think, unless it's called something else sometimes? 😅 Anyway, how did you manage to lock (using egzumer) to tx only on amateur ham? Thanks in advance!
@Bartok_J3 ай бұрын
@@LeHunkyDoryUsing Egzumer, you need to go into the hidden menu. Switch off the radio, hold down the PTT and function 1 button on the side and switch on. That will give you access to extra menu items (function 61 and above) which include various options including the ability to lock tx to amateur bands in different parts of the world.
@Bartok_J3 ай бұрын
@@LeHunkyDory Item 61 "F lock" is the one you need. Sets the TX frequency band plan. DEFAULT+ (137-174, 400-470) - allows TX on default bands, plus options Tx 200, Tx 350, Tx 500 FCC HAM (144-148, 420-450) CE HAM (144-146, 430-440) GB HAM (144-148, 430-440) (137-174, 400-430) (137-174, 400-438) DISABLE ALL - disables TX on all frequencies UNLOCK ALL - enables TX on all bands
@tonycat473 ай бұрын
Nice Video.👍 Do you know how to keep the display light on permanently? Goes off too quickly.
@m7frs2722 ай бұрын
Depends which firmware your using, but see 19mins into this video: kzfaq.info/get/bejne/Y81nms-IqrzUlKs.htmlsi=9PCpXr7ZiIdbTuJE
@johnwest79935 ай бұрын
I want the frequencies and the modes open in the firmware since I plan on changing the hardware filters and amplifier stages to work properly on 10 and 6 meters. I already have plenty of 2 meter, 70 cm HT's. It's a bit of work, especially adding antennas that will work on those bands, but it will be a lot of fun, and that's what ham radio is all about. But the firmware is beyond me, so I'm just waiting for firmware that will do the job.
@m7frs2725 ай бұрын
That sounds interesting, good luck with that. It would be a real game changer if you could!
@johnemmons90875 ай бұрын
Wow! Are you going to post this as a video I hope?!
@steefw38094 ай бұрын
Just calibrate with signal generator (like TinySA eg) with IJV (as far as I know the only fw with which tuneable) and you don't need anything. 6 and 10 metres is sensitivity less than 127dB, which is very good i think !
@johnemmons90874 ай бұрын
Any luck with the hardware mode’s yet!!!!
@MattinLapland5 ай бұрын
Was thinking of buying one but the harmonics issue worried me…are they better now?
@m7frs2725 ай бұрын
The harmonics issue is only a problem if you try and transmit out of the frequency range that the radio is originally designed for. So basically it's fine for VHF over 137Mhz & UHF upto 470Mhz. Just don't try and TX on CB (27Mhz) 6m & 4m Ham bands etc... Thanks for watching 👍
@MattinLapland5 ай бұрын
@@m7frs272 Aha ok that’s good to know many thanks 👍 I’m going for my radio licence soon. Radio is a very old hobby but never held a licence before.
@johnemmons90875 ай бұрын
There was a song in 70’s “Don’t fear the reap….harmonics”!!!😎
@m7frs2725 ай бұрын
@@MattinLapland Yeah I was the same, old hobby but only got my foundation license at the start of the pandemic. Good luck with your license 👍
@carlorobotti55725 ай бұрын
I have a UV-K5(8) (your right model) and have bought usb baofeng cable with CH320 com chip: installed with good driver. Have difficulties with latest Quansheng FWupdate software (language not recognized) So I have Installed "k5prog_win_v1.27.exe", put the cable, push PTT+switch ON of update mod, (led on ) on the K5.. but the software close for missing response from the radio. I cannot understand why. Any help? Is there a menu option on the radio that block the update/serial cable?
@m7frs2725 ай бұрын
I've not come across that problem, sorry. If you have Facebook there's a great and helpful community out there on several dedicated Quansheng pages that can usually help.
@carlorobotti55725 ай бұрын
@@m7frs272 RESOLVED: I've discharged the wrong (K6) FW. Now the upload is working. The Programmer from Quansheng has already problem with my PC (chinese language....) but CHIRP is working even if there are some errors in the report/print of the parameters they have to correct.
@pmusic64142 ай бұрын
For a GMRS user (primarily), which of the two firmwares would be better?
@m7frs2722 ай бұрын
Hi. To be honest on GMRS frequencies it really doesn't matter. I personally still prefer the menu layout of the Egzumer firmware, but it's down to personal preference. Thanks for watching 👍
@BravoKiloZuluАй бұрын
For me it's a case of trying to find any firmware that will flash it. 99% of them refuse to acknowledge my USB ports.
@m7frs27227 күн бұрын
Have you tried a different USB cable? Thanks for watching 👍
@johnyjohn543 ай бұрын
Hello! How can the radio go back to the original firmware? Thanks!
@m7frs2723 ай бұрын
You can simply flash back to original or any other firmware you require.
@Robyn.....................2545 ай бұрын
Thanks for this vid im new to this and finding it really difficult to program channels onto it from chirp any other options i could use?thankyou
@m7frs2725 ай бұрын
Glad you enjoyed this video. Please see my other videos featuring the UV-K5 on my channel for more information.
@Robyn.....................2545 ай бұрын
@@m7frs272 thankyou so much
@fabulousoffroaddesigns50802 ай бұрын
Can you set this to run just on channel mode and run the channels from 1 to 22?
@m7frs2722 ай бұрын
Yes 👍 Check out some of my other videos for more info. Thanks for watching.
@fabulousoffroaddesigns50802 ай бұрын
@@m7frs272 I've been watchng, but I have not seen any explanation of running FRS/ GMRS or C/B.
@mecherocirat3825 ай бұрын
Me puedes confirmar si desbloqueando funciona la banda de 40 metros solo quiero recepción gracias
@m7frs2725 ай бұрын
I've not found a firmware that allows that yet, but it may be possible 🤔
@DrFiero5 ай бұрын
EGZumer = exhumer verb [ transitive ] to exhume , to dig up to exhume a body / to dig up artifacts :)
@m7frs2725 ай бұрын
Thanks for this 👍 I'll try and say it correctly in future videos, thanks for watching.
@ch-_-radi64555 ай бұрын
I will need 3 radios for the best top 3 fw ❤🎉 73
@shaunwilliams37945 ай бұрын
How did u make it blue
@m7frs2725 ай бұрын
The blue screen is on the UV-5R Plus model. As far as I know its not possible to change without adapting the hardware/components internally.
@DoubtingThomas-mx8sl5 ай бұрын
Do these work on UV-K6 UV-K5(8)
@m7frs2725 ай бұрын
Yes, they are essentially all the same 👍
@ronaldgrimmig66595 ай бұрын
Your IJV mod isn't like mine. Mine is as user friendly and will transmit anywhere. Maybe you should update yours. I'm running IJV 2.7 I think.
@ronaldgrimmig66595 ай бұрын
Sorry it's v2.6.
@ik8vwaАй бұрын
What is the "II" indicator in the upper right screen of the ijv?
@m7frs272Ай бұрын
Hi, "II" is showing that particular channel is is scan group 2. If a channel is in scan group 1 it will show "I" or nothing at all if its not assigned to any scan group. I think it does the same in most firmware versions to be honest. Thanks for watching 👍
@ik8vwaАй бұрын
Thanks a lot
@mikegriffin5645Ай бұрын
It seems both Egzumer and Quansheng Dock are both all but dead, no work being done on them at all, seems issues with Chirp and other issues are at place ;) Anyway, I am using the IJV 3.14 and it is simply amazing, like a whole new radio, plug killer Chirp integration
@bettinanstevens92595 ай бұрын
Anyone have the uv-k5 (99)? According to Amazon it is the most recent version of the UV-K5 series radio with only cosmetic differences. Can anyone verify this? Can it be modded?
@johnemmons90875 ай бұрын
I tried to get some on Amazon and EBay (USA sales) and they took so long I canceled them. I ordered straight from china from a reputable dealer and got it quickly!!! Amazon doesn’t even sell the latest one (with blue screen)
@ssorcnivek23 күн бұрын
I live near Beccles. Will you share your channel list please?
@m7frs27223 күн бұрын
No problem 👍 My email address is in my channel description. Drop me an email and I'll send it over to you. Thanks for watching.
@jasong96955 ай бұрын
Try Kamils version
@eddtheduck20115 ай бұрын
does this transmit on uk cb band
@m7frs2725 ай бұрын
Basically, no, please see my latest video: kzfaq.info/get/bejne/eKtijJqHl9qrfYE.htmlsi=1J3l4rXJQt87NCy1
@stratocasterblue2 ай бұрын
Blast everbodies cortisol levels to 90 at the begining with your triple volume cw dam funko pop
@m7frs2722 ай бұрын
Apologies! I've made the intro volume lower on more recent videos. Thanks for watching 👍
@georgebarbaris44954 ай бұрын
Hallo my friend Can a firmware update be reversed? To the original? Thanks
@m7frs2724 ай бұрын
Yes it can 👍
@georgebarbaris44954 ай бұрын
Thank you for your reply nice videos Ben!
@herbertpondare81093 ай бұрын
does this radio can scan 40 meters?
@m7frs2723 ай бұрын
Not with any of the firmware I've tried. The lowest it will go is 17 meters (18 Mhz)
@pogtv8415 ай бұрын
yahooooooo
@m7frs2725 ай бұрын
Thanks for watching 👍
@optscepАй бұрын
I got tje the egzuner one but it does not transmit....😢
@m7frs272Ай бұрын
What frequency/s are you trying to transmit on? You may need to check the 'F Lock' setting in the hidden menu.
@optscepАй бұрын
@@m7frs272 I did and it's still locked
@skewsme76505 ай бұрын
So... ... ... no Fagci firmware?
@m7frs2725 ай бұрын
I did try it but it bricked both of the radios when I tried to flash it, so flashed them both back. I'll have to experiment more and maybe that's for a future video. Thanks for watching.
@skewsme76505 ай бұрын
@@m7frs272 gotcha, i'd probably stay away from that firmware until it matures a little, and try the Egzumer one on my UV-K5(8). Thanks 👍
@skewsme76505 ай бұрын
Now, if only QuanSheng would release a variant with cleaner output and higher wattage, while still retaining the ability for us to use mods.
@Lagomosa5 ай бұрын
@@skewsme7650 We need lower power levels, not more, want more go mobile or base.
@johnstockwell83225 ай бұрын
You’ve swapped your knobs
@grindz1455 ай бұрын
Knob jokes aside... I was thinking the same thing. Black on black is dooope.
@m7frs2725 ай бұрын
Well spotted! Yes I have 😉
@m7frs2725 ай бұрын
Yep, I think it looks better 😉
@johnstockwell83225 ай бұрын
I did the same, prefer the blue screen. I have just bought a plus version (£7 ion Ali exp) just for the larger battery and intend to swap the internal board over so I get the blue screen on my 5(8). I know it has no USBC for charging, but that’s fine I rarely use that anyway. 😊
@timothybrown77923 ай бұрын
As far as I understood it's only Milliwatts of power on 11m anyway so pretty pointless
@m7frs2723 ай бұрын
You are 100% correct. It's fine for receiving but definitely should not be used for transmitting out of the frequencies It's designed for. Thanks for watching 👍
@J0B-20 күн бұрын
hello ben 73'S, M0JNJ
@m7frs27219 күн бұрын
Hi John 👋 Thanks for watching 👍
@stratocasterblue2 ай бұрын
Nobody none of these videos show this radio recieving ssb on 2 meters 440 all I see is out of band nonsense
@QUADBOYification5 ай бұрын
Highlighting differences in firmware versions on different UV devices is somewhat awkward. Every firmware mod is different as are prices for groceries in different shops. You can fill hundreds of videos with these comparisons, basically comparing apples and oranges.
@ATP-Flo4 ай бұрын
Not really different devices.
@weblegion4 ай бұрын
Harmful harmonies? You kidding me - Who is this going to hurt?
@m7frs2724 ай бұрын
Anyone on board an aeroplane that's crashed due to interference for starters! 🤣 (and it's harmonics)
@weblegion4 ай бұрын
Come on.... That is just WAY over the top thats nonsense! @@m7frs272
@m7frs2724 ай бұрын
That may be a bit far fetched, however the interference WILL be caused within the airband frequencies causing disruption and difficulties with voice communication and navigation aids on board. Don't forget, aircraft and A/G stations use minimal power to communicate (about 1w) so a few Watts out of a handheld on the wrong frequency could cause serious issues. I've done another video highlighting this if you're interested: kzfaq.info/get/bejne/eKtijJqHl9qrfYE.htmlsi=NH9sw5cqFYET9_yL
@weblegion4 ай бұрын
Interference! The harmonics are so so LOW and the transmitters from Air Control and the Cockpit are far more powerful to override any interference... @@m7frs272
@weblegion4 ай бұрын
Yes I k now its Harmonics! Google spell nonsense - I can spell. @@m7frs272
@charly13055 ай бұрын
👎
@0nepieceofmybody4 ай бұрын
is a bad mod . Make radio crash and screen problem and sometime radio transmit in automatic. no good this firmware very very bad,