I can’t see what you are doing dude.

Safety routine: -Remove magazine. -Clear chamber. -Barrel sock on. Eye pro goes on upon arrival, does not come off until departure.

That hop up looks nice

Enjoyed your foam inserts btw, they are nice. Got one in a DYTAC blast flash hider for the world's shortest airsoft suppressor.

Note: i am not a technician and will probably never be one. So for years my airsoft gun was shooting all over the place and was double feeding, for no reason like at all, i tried everything changing hopups, changing buckings, changing nubs, changing barrels, changing engines, even changing my rail because i thought it was pushing on my hopup causing it to mess up. so one day i broke down my gun for the 3rd time ever, doing it my self (the previous times where the shop technician at the airsoft arena i play at) so i took out my bucking, and noticed it was cut but the metal walls where the whole in the barrel meets the metal nub thingy that MAXX gave me, so i went though my stuff and found an old bucking of mine, i have no idea what brand but it came with my gun when i bought it so it was a stock bucking from an SR-16E, so i took that bucking and replaced it with the old/new/stock one, and i noticed the bucking was sticking out of the opening where the Barrel clamp was supposed to sit, so i tried pushing it in, it wasnt going in no matter what i did, and if it did go in it would be to long and would foldup and warp the lips, so i figured what the hell its a bucking they are cheap, so i cut like one 1-3mm off it (I eyeballed it and cut it to where it was almost flush with the edge) and i put it back together, looked at everything else fixed the position of my rail cause it was a little twisted, I had no hope that it would work when i went to shoot it, so i went down connected my air tank (Jack engine 120PSI, i used to run 80 but it was shooting 160FPS and i knew 130PSI was the limit for Jack engines) turned on my light, and BOOM i shot three bbs straight as a fucking laser, i was surprised as hell and super fucking happy because for years literal years the grouping was 1foot apart at 6-7yards, but suddenly it was a 2inch grouping at 50 fucking Yards, i was so surprise i couldn't believe what i was seeing so i called over a friend and he told me i wasn't crazy and it was actually shooting straight. i don't even have a tight bore barrel i have a stock barrel... The Bucking i had before the one with the hole in it, i realized when i opened it that it was litterally ripping its self apart and grinding the bbs that where shot thought it and thats what caused the accumulation of white dust and or power that looked like the dust from BBs if they where shot and on the ground and you stepped on them. i don't know what the hell i did and why its working now but i am so happy with what i did, i am not sure if its a temporary fix or a permanent fix because of course im not a technician but it shoots straight for the first time in yeeeeaaaarrrs litteral yeeeeaaaarrrrs i have had this gun...

Great video. Thanks

This is over a year after you posted this video, but I was just wondering what bucking you are using?

If your are using a standard bucking do you need the nub or can you just use the standard arm?

hello, at 5:46 do I have to take the hopup apart and take that one piece out and install the other piece or can I just take the hopup out of the box and install it into my gun without having to do all that stuff?

Hello, im facing some dificulty with may gun, perhaps you can give some tips in order to solve some issues. I hava VFC HK M27 IAR, with some updates, but i’m facing some dificulty to find out what could be wrong, or malfuctioning. She is running with gate titan, 6.01 450mm modify hybrid inner barrel, with maxx hopup unity (old vertion) assembled with the Thru Hop - Thrusight bucking monted with concave hopup arm. Iniitialy i was facing some issues regarding double feeding, that kind has solved changing the nozzle size, the actual one is from Maxx and has 20.25mm. it has instaleled too a Maxx piston head, and cilindre head. Normaly the first shoot it goes weak, them its “stabilaize”, however sometimes its happens again some times dont. The last time, i noticed that double feeding is happening againg wen i use hevier BB sutsh as .32, with .30 i have no issues of doube feeding. What i possible are making wrong?

is there possible to use the Light diods on the Maxx hop up to get the same function as the TM NSG have regarding a empty chamber stopp function

Does it have to be a flat hop to installed or can it be a standard

Can you modify the arm to use er hip and a er m nub?

How do you remove the springs

Why talk about the hop you aren't going to use so much?