Quick Repair a Vacuum Hose NO TAPE

Рет қаралды 405,703

3 жыл бұрын

Its important to note that this will only work in a non-electrified hose. Do not cut into a hose that has electrical running through it.
Due to factors beyond the control of Hank's Garage, I cannot guarantee against improper use or unauthorized modifications of this information. Hank's Garage assumes no liability for property damage or injury incurred as a result of any of the information contained in this video. Use this information at your own risk. Hank's Garage recommends safe practices when working on vehicles and or with tools seen or implied in this video. Due to factors beyond the control of Hank's Garage, no information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. Any injury, damage, or loss that may result from improper use of these tools, equipment, or from the information contained in this video is the sole responsibility of the user and not Hank's Garage.

Пікірлер: 141

@rodneyreynolds2529 Жыл бұрын

I am 70, female(husband's pic) and want to thank you so much! I fixed it all by myself thanks to your wonderful instructions...I am grateful...Bless you...keep it up!

@144Donn Жыл бұрын

TY SO MUCH! After about 2.3-3 years of taping and then just leaving the vacuum cleaner in the closet, I just fixed both ends! You are a Prince!

@parghi22 Жыл бұрын

Thank you, worked perfectly! Didn’t know this was possible, I’d been using duct tape for half a year and it did not work well. This took me 15 mins and it’s like new.

@paulwoods7470 2 жыл бұрын

Mate, this was a life saver, really helped and actually was so easy, been putting this job off for over 2 months, saw this video and all done in about 15 minutes, can't thank you enough !!!!!!

@rad1sh480 Жыл бұрын

I love KZfaq! Thank you so much for taking the time to show how to do this, even though you're scrapping your vacuum cleaner. I have literally repaired mine exactly as you did, even to the unwinding of the cord as it was stuck. Saved hours of searching Ebay for old spare part. Thanks again.

@Babybottle2you Жыл бұрын

I’ve watched a dozen of these trying to find the best way to fix this vacuum and Hank!!! Hands down this was the simplest and easiest way to fix a vacuum hose. Thank you for your insight! I also appreciated that extra knowledge on inspecting the hose to make sure it’s even repairable. 👍🏼😁

@JulieMrsP 3 ай бұрын

Thank You! It’s taken me 10 minutes to fix my favourite vacuum.

@annemcgowan2489 2 жыл бұрын

Thank you for helping to save my old vacuum! I thought I was out of luck since I couldn't find a replacement hose for my model. But with a break right near the end, this tip did the trick!

@jayc3110 Жыл бұрын

Thank you! That was simpler than I thought. Just fixed my vacuum hose after watching this. Thanks again and best wishes.

@sanpansam7977 7 күн бұрын

Wow, so simple and easy. Thanks.

@helsinkiproject 2 жыл бұрын

So simple and brilliant. Thank you for the tip!

@xondominique2602 8 ай бұрын

such an easy fix! and i was worrying where would i find a replacement hose for my old vacuum. thank you so much!

@Gabe_Cross 2 жыл бұрын

This worked for me. Thank you very much. I have an old Hoover cordless vacuum cleaner that I could not find a replacement hose for. Fortunately the tear was on the very end just like the one in your video, so I could do exactly what you did here.

@TheTheo58 24 күн бұрын

Very good video Hank, I've done a lot of these with hose cuffs wand and machine ends. Making up long hoses for my Lux and Royal tank vacuums. Reused many discarded hoses and cuffs.

@petercrofts8962 2 жыл бұрын

Thank you very much for putting this up. The trick of tearing out the remainder of the old hose is a good one.

@10gallons Жыл бұрын

Thank you for this. Simple and straight to the point.

@cherylfowler2666 Жыл бұрын

Wow. I wanna say thank you thank you thank you. Watching this video just saved me from buying a new hose …. You’re a lifesaver my hubby ordered part lol I said to him who is the part for cause it’s not for my vacuum is fixed lol Joking lol

@belleck25 2 жыл бұрын

Wow. This is a life saver. I was about to buy a new one if I couldn't get a new hose but you saved me. Although mine can't be screwed but it can hold and I can use it again. I jut probably need to buy something to tape it.

@mollygirl 3 ай бұрын

This is great when you're a youngish person who doesn't have arthritis in both hands, but for we old bats it's not going to be so easy.

@JP-yt1ek 23 күн бұрын

It could be worse, you could be blind too

@mahkuntizitchy2083 9 күн бұрын

@@JP-yt1ek Or have explosive diarrhea!

@dreddwailing5505 4 күн бұрын

Use a pair of pliers and unwind the coil inside the connector

@Findinglifesbeauty 4 ай бұрын

Thanks for sharing this!! Thought I was going to have to replace the vacuum, but this was an easy fix!

@fhamid01 Жыл бұрын

thank you !!! I just fixed the nozzle to the vacuum after watching your video !!!

@MatthewNelson12 4 ай бұрын

Thanks for posting this. It was really helpful!

@sabiantheomnivore5592 2 ай бұрын

Great video. Fixed mine in minutes.

@glenheil2449 3 жыл бұрын

Thanks for the info just fixed my old kenmore

@ryanthomas49 3 жыл бұрын

This is perfect advice. My Eureka Airspeed has a tear right at the end and I have to use a hand vacuum for stairs, hard to reach places, etc. In the future, I could use this.

@lorrainedrake6462 2 жыл бұрын

Very good advise ,wish I had seen this earlier could have saved some money 💲 by just fixing it and not paying out for a new one 🙄

@brianwohlt352 Жыл бұрын

Thank you for the helpful video! You saved me $28.99.

@robertlock5501 Жыл бұрын

Nice - exactly the repair i was looking for - i'll be trying this out ASAP

@Circa_-rp7zp Жыл бұрын

Worked perfectly! Thank you so much

@but199018 Жыл бұрын

Thanks Hank! Worked like a charm for me as well.

@spillingthetea-na1642 3 ай бұрын

🙏🙏🙏🙏 bless you for this video! Trying this tomorrow ❤

@ScorpioMsbhvn99 Жыл бұрын

Thanks so much! This really helped. I had no idea it was so easy.

@mts7274 Жыл бұрын

Holy cow! Thanks for posting this. Just fixed my Bissell Powerforce Helix today after watching this video!

@cme3344 Жыл бұрын

It worked!!! Thank you!!! I was just about to purchase one online and thought I'd search KZfaq first.

@DOLRED 28 күн бұрын

Yep. I have an early 1970s Montgomery Ward Canister Vac which I salvaged in 1976 and will not give up on. It still has all its might. Most canister bags, as different as some can be, will fit. The hose could use some work as you described. Thanks!!

@moonbladem 22 күн бұрын

Awesome tip! Thank you!

@tattoedpassport 9 ай бұрын

Thank you!!! It works and saved me money. I almost cried cuz I’m broke 😭 and my vacuum was a hand me down. Has to be at least 15 years old. Thank you!!!!

@keithharris4867 2 жыл бұрын

Worked like a charm!

@cathyserafinowicz6374 Жыл бұрын

Thank you,I’m going to try this tomorrow.❤️👏🏻👏🏻👏🏻

@mattphilip3266 2 жыл бұрын

you saved my morning, thanks.

@freddiaz82 2 жыл бұрын

Thanks dude! You just saved me time and money! 😀

@octogirl2046 Жыл бұрын

Wow, Thank you. I didn’t know I could do that. I’ve gone through five rolls of tape. Lol

@isabellajohnson5779 Жыл бұрын

Super awesome video, it seems so simple and yet I wouldn’t have ever thought about doing this , my vacuum hose just broke on me and I’m lost without my vacuum having 2 small children and 2 cats I MUST have a vacuum lol, anyway thanks for the fantastic tip, I can make this stretch a little longer before I have to buy a new one

@wafaazaher9362 11 күн бұрын

شكرا بجد استفدت جدا 🌹🌹🌹

@jennifishy Жыл бұрын

thank you so much something i would normally be grab the tape and repair it but your video save me alot

@carolgrimes6106 Жыл бұрын

Thank you this was a easy fix for me again thank you for the video 😊

@GeorgeWitham-qb6ye 10 ай бұрын

Love this vacuum!

@EptotALT 2 жыл бұрын

Thanks this worked like a charm

@mattwaters6987 Жыл бұрын

Good to know. Thanks for sharing. 👍 😊

@peterfrance702 2 ай бұрын

Thank you!

@johnburns6422 4 күн бұрын

Good Job .

@cassiewoolfrey313 2 жыл бұрын

Thank you SO MUCH!

@480_Detailing 9 ай бұрын

I was about to take this new hose back to Home Depot then i realized it just came unscrewed thanks to this video 😂

@alanr1062 Жыл бұрын

Thank you, it worked a treat on my Vax lift off 👍

@AlperUyan 6 ай бұрын

It works! Thanks man.

@meshark_t 27 күн бұрын

Tnx, good to know it can be done.

@Venus_hooked 6 ай бұрын

Thank you very much❤ you are a life saver.

@joannapushman3806 3 ай бұрын

It worked 😊Thank you!

@richardstell8099 7 күн бұрын

Thank you sir ! 😀

@justmoi7934 12 күн бұрын

Getin!! After 5years of gorilla tape and sighs of 😤😤😫😫 I now have a proper hose well chuffed thankyou! Oh I have a vax and it’s like when you get to the end of taking the broken bit out of the connector..they must of siliconed and super glued that right in there, so I took my needle nose pliers and started twisting it around them (I just couldn’t do the last bit by hand at all) came out so easily after that 🤩🤩🤩

@sesker12 Ай бұрын

THANK YOU SO MUCH ...

@martinkuo1380 Жыл бұрын

Worked like a charm on a kinked Bissell hose.

@luvr381 11 ай бұрын

This is great! I can't get replacement part for my Panasonic vacuum anymore.

@sharpazn 7 ай бұрын

perfect!!! I straight up teared up the whole thing and put hose right back in. I will have to buy some glue but for the moment the thing works perfectly!!! NO TOOLS!

@fishcats1 Жыл бұрын

Thank you so much!

@stuffoflardohfortheloveof 6 күн бұрын

Well well, nice one! Didn't know you could do that 👍

@smilewithnature820 Жыл бұрын

Thank you....big big thank you

@Alsedana Жыл бұрын

Thank you you have been really helpful

@hanksgarage_ Жыл бұрын

Glad it helped

@leeskeery Жыл бұрын

Great. Thank you 👍

@anthonygameclub4059 6 ай бұрын

Thanks so much from Bali paradise island 🏝️🏝️🏝️

@jerleytomatao7598 Ай бұрын

Thank you so much now i can fix our vacuum hoss cleaner now’

@kundi13 Жыл бұрын

Saved me moneyyyy....thank youuuu !!!

@aileencarla13 11 ай бұрын

Thank you sir ❤

@patmccleland988 4 ай бұрын

Thank you Hank! So easy. Thanks for an easy to follow description....

@SaaviPuri-br7kq 4 ай бұрын

thanks

@markbrouillette9075 Жыл бұрын

Thanks, brotha!

@MIEDEPAIN20011 Жыл бұрын

Great , thank you 😊

@nellieandclarice 2 ай бұрын

Thank you for this video. I’ve been glueing mine with a plastic glue and it’s been OK for about 10 uses and then it cracks again the glue comes loose. I’m gonna try your tip now. If it continues to crack, I will buy a new one.

@adduintense Жыл бұрын

Thank u!❤

@shattered-reflection8045 3 ай бұрын

Great quick instructional video! Thank you!

@J_C_Zarn 2 жыл бұрын

"If you can't unscrew it, just undo it" - Planned Parenthood

@Jp-kb3op Жыл бұрын

lol

@H.pylori 7 күн бұрын

Still works in 2024....Thanks.

@cynthiaroswick1621 Жыл бұрын

Thank you for your video. I almost ordered a new hose($64.00). You are a life saver

@DL-by8el 10 ай бұрын

Oh my gosh thanks

@judeamuwella8699 11 ай бұрын

Thanks, I searched for u tube but most of the hoses connections are by two tabs which my one does not have. I ll try this method tomorrow. Thanks in advance

@hashimsalim2665 15 күн бұрын

good

@vallprout 9 ай бұрын

Worked for Electrolux Oxygen. However, my machine had 2 wires embedded in the hose in the socket that had to be cut to get the hose out. That meant that the carpet head would not be able to vibrate on operation. But will just have to use the hardwood floor head instead.

@mehrasat9057 Жыл бұрын

Thanks simple problem simple solution 😅

@Oakley1331 11 ай бұрын

Thank you SO MUCH for this video! Before I watched this, I thought the hose was glued in the handle. Then my husband tried unscrewing it.. I started sweating watching him, certain he was going to break the plastic end piece an second. That's when I started frantically googling for a solution. It was like the clouds parted & the sun came out when I seen your video: )Good job on this little video. It was short, to the point & extremely helpful. 🤩

@paulmusch675 6 ай бұрын

Do you think a Beam Rugmaster Hose would be repaired similarly?

@JoseFlores-jc4ob Жыл бұрын

Thank you. Can you replace an Atrix backpack hose? I would love to know if that is possible without buying the new hose.

@IlusIl Жыл бұрын

OMG, is that easy? I almost buy the new one, thanks bro

@MrDouglasshippuden 2 жыл бұрын

Didn’t even know it was a screw on. You saved me $30

@NeverEndingStar Жыл бұрын

we have tape around ours right now, im going to try this LOL

@fiore32 2 жыл бұрын

Omg this is so cool 😎

@gregakinson2800 2 жыл бұрын

Good video but if you have the long sweeping hard plastic gooseneck that the hose goes into your out of luck.

@peggybrenneman6371 2 жыл бұрын

Where does one purchase a continuous length of hose to do this? I have a cleaning business and I use the Shark Navigator Pet Vac. The only thing that ever breaks on these vacuums is the hose and that's from using a coat hanger to get it unplugged. I have 4 hoses I need to repair but can't find where to buy just vacuum hosing? TIA

@jamesgullo8240 9 күн бұрын

Was that hose from an auto scrubber?

@butterbean3004 3 ай бұрын

Doesn't work for a hoover steamvac. Can't shorten the hose as it's a 90 degree turn into the end cap. Barely long enough, bad original design. Tried multiple layers of aluminum foil tape with no luck. Will have to go back to duct tape. There is a water supply line that runs inside for the attachments. Otherwise, will try and find another longer same diameter section and splice it in 8 inches up. Hose has been discontinued from hoover.

@michaelny7184 Жыл бұрын

♥ BRILLIANT ♥

@DL-by8el 10 ай бұрын

I have a eurika boss and need to refeed the hose into the end. I could get the wire out of the end (like you did) but can't get the plastic out from the grooves in the end. Should I soak it in hot water?

@hanksgarage_ 10 ай бұрын

You can try that