QUICK & SIMPLE Explanation! Wheel Offset & Backspacing Explained

Рет қаралды 27,169

Күн бұрын

Wheel Offset & Backspacing Explained by Landan with LMR.
When you follow manufacturers’ specifications on offset and backspacing, you can have improved handling, less stress on suspension components, and even wider wheel widths can be installed for the highly sought-after staggered look on your Ford Mustang or other vehicles!
THE THREE TYPES OF OFFSET
Negative Offset: The hub mounting surface is closer to the back portion of the wheel. This will result in greater clearance for aftermarket suspension and provide you with a wider overall stance.
Zero Offset: The hub mounting surface is even with the centerline of the wheel.
Positive Offset: The hub mounting surface is closer to the face of the wheel. This will result in extra fender and quarter panel clearance to help eliminate tire rubbing problems.
Backspacing is measured from the back portion of the wheel to the hub surface of the wheel, where it bolts to the car. Backspacing is always measured in inches and is closely related to the offset, meaning, that when you change one, it immediately affects the other.
Chapters
0:00 Intro
0:27 Wheel Width Explained
0:48 Wheel Offset Explained
1:45 Back Spacing Explained
2:16 Overview
1979 - 2021 Ford Mustang Wheel Offset Guide:
lmr.com/products/mustang-whee...
Shop
Shop SVE Wheels: 1979 - Present Mustang or Ford Lightning truck
lmr.com/products/SVE-Mustang-...
Watch More
SVE Wheels playlist: 1979 - Present Mustang or Ford Lightning truck
• SVE® & 5.0 Resto® Wheels
KZfaq: latemodelres.to/youtube-subsc...
Facebook: / latemodelresto
Instagram: / latemodelresto
TikTok: / latemodelresto
#LMR #Wheels #SVE
Use of this video is subject to the terms as set forth in our LMR Install Video Disclaimer | lmr.com/page/lmr-install-vide...

Пікірлер: 28

@perspicator5779 24 күн бұрын

Nice concise simple explanation! No wasted blah, blah! Great job!

@latemodelrestoration 22 күн бұрын

Thanks! -Landan

@floyd4311 2 жыл бұрын

Even if you thought you knew…a review never hurts!

@latemodelrestoration 2 жыл бұрын

Glad you enjoyed the video! Let us know of any other ideas you would like to see from us! - Jay

@oldowl4290 Жыл бұрын

Hands down the best video to date on KZfaq about this subject. You couldn't do any better!

@jimmyjamesgarage3290 2 жыл бұрын

Great breakdown Landon. 👌

@kimhelton5514 Жыл бұрын

excellent !!

@victorxavier9977 2 жыл бұрын

Great breakdown 🤘

@latemodelrestoration 2 жыл бұрын

Glad you liked it! - Jay

@anantagaura Күн бұрын

That's how you explain things. Not those Fitment Industries guys basically just showing off.

@safdaralli2567 Жыл бұрын

By far ..THE BEST VIDEO at explaining the subject at hand..what sets this video apart is the VISUAL AID/VISUAL REFERENCE that allows the viewer to get a good look at what is being explained without which it is a bit challenging to picture in your head (Spatial Dimensional Awareness)...Bravo Zulu brother..

@latemodelrestoration Жыл бұрын

Thank you for the great feedback! -Landan

@misterchristopher1020 2 жыл бұрын

I have a 2003 mustang GT. I have a rear end from a 1996 which is about 3/4" narrower per side. I have a 15x10 with 6.5" backspace and it fits a 275 60 15 perfect.

@rik11stang29 2 жыл бұрын

For gt Stang. 2016

@chunkafunk81 2 жыл бұрын

good information:) thankyou! btw...what happened to JMAC??

@TheKansasDude 2 жыл бұрын

I have wanted to know that for a long time as well.

@latemodelrestoration 2 жыл бұрын

JMAC still works for us here at LMR. He is currently a part of our Product Development team. - Jay

@Edub816 Ай бұрын

So, will your SVE SC 17X9 5 lug wheels work on a fox body with sn95 spindles? Which just rack limiters etc needed on the 4 lug? I noticed the spacing is different. However, I’m terrible with geometry. Thanks.

@latemodelrestoration Ай бұрын

Yes, the 17x9" 5-lug SC-style wheels will fit a Fox Mustang with SN95 spindles. Rack limiters will be needed and more than likely you'll also have to clearance the inner fender splash shield. We have a separate video on that. I'll link it below. As far as the wheel specs are concerned, the 4-lug SC-style wheel has a +20mm offset to clear a Fox Body grease cap. That's why you see the small difference between the 17x9" 4-lug and 5-lug wheels. kzfaq.info/get/bejne/qtF6ZdegztPPemw.html

@Edub816 Ай бұрын

@@latemodelrestoration thank you.

@dimvol8605 Жыл бұрын

Hey there. I want to ask you. My factory wheels have the following size. 7,5x17 et 25 6x139,7 bore center 106,1. I want to buy new wheels. The size that is close to my factory size is 8x17 et 20 6x139,7 bore center 106.1. My question is will it fits or will I have an issue. Thank you in advance for your help.

@latemodelrestoration Жыл бұрын

Hey there, it depends on the kind of car you are wanting to install the new wheels on. We specialize in the Mustang and SVT Lightning. If you have any questions or concerns about another vehicle, we recommend checking out some forums or contacting other owners that have a similar spec to compare.

@rik11stang29 2 жыл бұрын

So to make the tire and rim flush with the car.. negative off set

@robpeters5204 2 жыл бұрын

You have to know what the measurements of your cars hub to fender and then find a rim that will fit using the info given in the video or you will be trying on different rims til the cows come home.

@robpeters5204 2 жыл бұрын

Don’t forget about wheel diameter.

@804MRMAN 5 ай бұрын

*Spoke design was left out. Which is very important with wheel fitment and should be included into the fundamentals of "wheel clearance and appearance"*

@xushenxin 8 ай бұрын

All I want to know is it it will fit. Don't give a shit about these stupid concepts.

@latemodelrestoration 7 ай бұрын

I think we can all say the same thing. We just want an answer. However, it doesn't always work that way, so it's good to understand these concepts. -Landan