Quick steel Thermosteel ( Review )

Рет қаралды 111,914

6 жыл бұрын

This video contains Paid links that gives me a 6% commission if you click and buy any product on that website . Check out my web site www.nobox7.com/ Check out my store front www.amazon.com/shop/nobox7
Support this channel on Patreon www.patreon.com/user?u=3620781 Check out my store front www.amazon.com/shop/nobox7 Purchase here amzn.to/2vxfmF4
Testing a new high temp compound after our findings in this video
This stuff only lasted 5 days . quick steel thermosteel is not a very good product as far as i can tell , sure it has its place , just not in my shop but dont worry im gonna do some more test with this stuff

Пікірлер: 111

@SteveTheBeardedWonder Жыл бұрын

I just used this to seal a crack in my exhaust manifold and so far I'm very impressed. I may do a review after a couple day or weeks of spirited driving.

@NOBOX7 Жыл бұрын

LOL , never crest under spirit or around corners , your radar may not pic up ...

@Mike-oz1wf Жыл бұрын

@@NOBOX7 is it still holding after all these years?

@joemama3372 10 ай бұрын

@@Mike-oz1wf answer is already in the video. @ 10:15

@dustinaruba7509 5 ай бұрын

Yes I'm hoping to use this for a temporary seal on my exhaust just to pass inspection

@squarebodyseth5986 4 ай бұрын

How is it doing!?

@jameslester108 2 жыл бұрын

Thanks for the info

@Adam-gn4oo 3 жыл бұрын

I just used it works great but if you read the instructions it's a filler for steel to steel or steel to iron patches it works great for it's intended use

@TheWolf047 3 жыл бұрын

that's what I thought too...stupid

@mendezcampos9197 3 жыл бұрын

I got leak on chevy s10 2000 intake gasket think can seal that n than i pour some bars intake sealer inside for better seal.

@SL7Z62 6 жыл бұрын

Why Not just use Stove & Furnace Cement its only $2.99 at most hardware stores 8oz tube

@theagileone827 3 жыл бұрын

When the update video haha. Its been 2 years.

@jt-wy8qc 5 жыл бұрын

jb is the only 1 ill buy now on ,i try all i can find and jb its the best at every thing i do and tested but my friend uses that quick steel on motors and it works idk how he gets it to work bc i cant

@eduardodiaz5762 5 жыл бұрын

I've used it on a 2 stroke Motor too, make sure the surface is well sanded and prepped before putting this sandy Goop on it, still would recommend JB Weld tho

@nathanlink4926 6 жыл бұрын

Appreciate the content, you help me build my Oil burner!

@NOBOX7 6 жыл бұрын

Thanks brother , Glad i could help .

@alidenver787 2 жыл бұрын

you all prolly dont give a shit but does someone know of a way to log back into an instagram account? I somehow forgot my password. I would appreciate any help you can offer me!

@finnleykye6130 2 жыл бұрын

@Ali Denver instablaster :)

@alidenver787 2 жыл бұрын

@Finnley Kye I really appreciate your reply. I found the site thru google and im waiting for the hacking stuff now. I see it takes quite some time so I will get back to you later when my account password hopefully is recovered.

@alidenver787 2 жыл бұрын

@Finnley Kye it did the trick and I finally got access to my account again. Im so happy! Thanks so much you saved my account!

@calvinmcginnis7239 Жыл бұрын

That's just some good stuff I've used it on fixing aluminum thermostat housing and it held up pretty good

@justindastar 4 жыл бұрын

still no link

@chrystamizon6898 4 жыл бұрын

Does it work with alluminium? Im gonna use this to stick alluminium brembo brake cover to my brake caliper. Please reply 😥

@NOBOX7 4 жыл бұрын

I would not use this , use jb quick , it should be fine

@manicmandownup 6 жыл бұрын

Do you think this would be ok to use on a hairline split on a line coming from my sending unit? You can’t see the split but when I start my truck there’s a fine mist of fuel that sprays out...your thoughts?

@NOBOX7 6 жыл бұрын

i would clean the line then apply some jb weld ,then rap some copper wire " a single tiny thread like strand " and wrap it around the pipe and continue to apply jb weld as you wrap the wire , leave a squib out the other end so you can twist it off, basically your gonna make a copper wire jb weld composite.

@manicmandownup 6 жыл бұрын

cool idea, thanks!

@HazenMire 4 жыл бұрын

Just used this stuff on an exhaust pipe break. Wish I spotted this vid first since I was debating on this or JB weld.

@JOE...Leach. 2 жыл бұрын

Jb weld didn't work it's garbage to

@HazenMire 2 жыл бұрын

@@JOE...Leach. hey there Joe, it's been 2 years since that post of mine, and wouldn't you know it, I've finally replaced my exhaust pipe this summer after years of patching the same break over and over. Having used the different pastes, putty's and wraps available at my local advance and AutoZone. Honestly I've had the best luck with water dipped Fiber Fix and the occasional soup/steel or aluminum can depending on size of the hole. Just make sure to sand the area clean or it won't adhere.

@ambertrumbauer-griffis6032 4 жыл бұрын

OK to fix small hole in motorcycle gas tank?

@NOBOX7 4 жыл бұрын

no i would try jb weld or acid core solder

@GemCityLilMatt 11 ай бұрын

I bought one from the store and when I opened it , it was already dry what should I do ?

@NOBOX7 11 ай бұрын

Take it back and ask for refund then get fire place patch from home depo or menards

@brightnessus3549 4 жыл бұрын

Is it still holding on ?

@shivareddy3788 3 жыл бұрын

Hi .. can this product be used on aluminum transmission case..

@NOBOX7 3 жыл бұрын

I wouldnt trust this stuff on any thing, use heigh temp jb weld

@shivareddy3788 3 жыл бұрын

@@NOBOX7 thanks...there is crack on transmission case onmy car skoda rapid..its cost 70k to replace it.. will JB weld extreme heat will work? You experience with this help me a lot..

@brazenhammer3307 2 жыл бұрын

Just used some on a Crack in my exhaust manifold, we will see how good it is I don't have a cat so it should be fine for my 1960 ford fairalane

@blizzytaj Жыл бұрын

Did it work?

@brazenhammer3307 Жыл бұрын

@@blizzytaj yes I had to add a second time because I missed a Crack but it worked really well

@overratedprogrammer 18 күн бұрын

Still holding up?@@brazenhammer3307

@petedude2lu3 11 ай бұрын

boiler technicians have some 2400F pipe thread and gasket sealproducts. hit me back and i will recall what brand(s)

@NOBOX7 11 ай бұрын

Thanks thats what makes the comment section so great on youtube search

@bigb3577 9 ай бұрын

U would not be able to use this to fix loose thread if there’s high pressure ?

@NOBOX7 9 ай бұрын

use jb weld

@bigb3577 9 ай бұрын

@@NOBOX7jb weld got too hot and just started bubbling and melting off

@paulkoenings5934 5 ай бұрын

As a result of video, I purchased Thermosteel. Not easy to work with, very funky solution after mixing. Let cure four days before starting engine. Initially, after curing seemed fairly strong. Ran engine 4-5 hours & substantial cracks. Do not recommend for any length of time.

@NOBOX7 5 ай бұрын

Thanks for the input

@luiszelaya2823 6 жыл бұрын

This thin is too brittle. It clogs the holes but it won't last. I'd be careful using this thing in any hole before the cat converter since it will send a lot of loose particles forward.

@tiggeronloose6040 11 ай бұрын

well it looks like you pressed glass so hard it had no filler between glass and metal and I did not see you clean surfaces

@worshipwhilewewait 3 жыл бұрын

Whew first off MIX THE CRAP OUT OF IT! 2-3 min. Should end up being a consistency of sandy glue. It's an epoxy-like substance. If you're using it on an exhaust system hook your shopvac to the tailpipe sucking OUT thru the tailpipe to draw the material into the crack (IF it's a hairline/small crack). Otherwise use like you'd spread bondo with screening (no suction). Let it sit for 24 hrs. Have used QS and JBWeld and actually like the QS better. Just used this on a plant air compressor manifold and worked perfectly IF you read the instructions and use it on the materials it's intended for. Also PREP IS 99% of the job!!! CLEAN SURFACE!!!

@brocfleischer7486 Жыл бұрын

Have you ever tested on iron to steel? It doesn't say anything about glass, plastics or wood.

@NOBOX7 Жыл бұрын

i recomend jb weld high temp this stuff did not work well and is like sand in a jar , it doesnt stick well in my opinion

@600miles 3 жыл бұрын

Mine hardened up in the container after having it for 5 years, that's $18 wasted

@LukeVMH-Games 8 ай бұрын

my exhaust is always 1300 degrees F. jb weld doesn't do that

@fredkyle1252 5 жыл бұрын

STICK WITH THE SURE THING JB WIELD

@raullab3195 4 жыл бұрын

Fred Kyle that shit dont work fuk dat shit

@kurtilingus 2 жыл бұрын

Dang, was hoping either this junk or JB's "Extreme Heat" analog would have the same smooth consistency as JB's original steel resin just bc I was hoping there was a chance it would outperform JB orig. as a *strong* thermal transfer adhesive... No friggin way! They might as well have boulders in these products where thermal transfer performance is concerned & renders them useless for that application. Rats...

@shinigami117s8 Жыл бұрын

I’m assuming it’s still going good?

@NOBOX7 Жыл бұрын

it lasted 2 years

@TheJestar30 6 жыл бұрын

Has it held up to date? Dependable? Thanks

@NOBOX7 6 жыл бұрын

No sir i do not recommend this product so far . perhaps it has uses just not in my shop

@eduardodiaz5762 5 жыл бұрын

He didn't follow instructions so there is that too.

@NOBOX7 5 жыл бұрын

@@eduardodiaz5762 yeah but there aint nothing saving this crud , its crap no matter how you put it on . It leads you to believe its a steel putty but its far from that , JB weld is way better .

@eduardodiaz5762 5 жыл бұрын

I used it on a 2 stroke iron block, it's still there after 6 months. But I can see it brittle up and not holding up to 400°, I should of tried JB Weld. Thanks for the advice.

@orlandonunez6167 3 жыл бұрын

Should of cleaned the surface first.

@LukeVMH-Games 8 ай бұрын

been five years, can I get an update?

@NOBOX7 8 ай бұрын

I dont know if i used it wrong or what but it didnt last very long at all . I will not buy it again i dont think

@cornfusedatbest6693 3 жыл бұрын

Nothin better than a tutorial done by Charlie Daniels. I was hopin ta hear "Uneasy Rider" at the end. Anyway, I had good luck with JB putty. It's mostly about how ya prep the material that needs fixin ... or just put on the curb. Good Video.

@BeBpato 3 жыл бұрын

I guess it worked because he has to linked the video 🤣

@TheOwen1974 4 жыл бұрын

Used it to patch cracked exhaust header, it worked great. I cured it with a heat gun.

@roccomerleno5101 4 жыл бұрын

Still holding? I just did mine with it

@benludwig3034 2 жыл бұрын

@@roccomerleno5101 did it hold up

@jopisano67 6 жыл бұрын

Anyone ever use this stuff on small holes on exhaust pipes ?

@TaxPayingContributor 5 жыл бұрын

Just put this sandySlime on some pinholes at weak welds on my catalytic converter unions. Worked it into holes, then smooshed another 1/8 in layer over top. 4 hours rock hard. Gonna give it overnight to cure before I bring it to temperature.

@eduardodiaz5762 5 жыл бұрын

Put it in a hole on my 2 stroke engine, it gets only 400° on it still there after months. I threw the rest away after it harden and was useless

@djevilj66 5 жыл бұрын

i just put it on a small crack in a manifold, it wasent hard to aplly at a 55-ish degree angle so far im pleased but we'll see how long it holds. depending on how big you hole is id dill it to about 1/4" so that this stuff could also get inside and form a lip making it almost like a plug that way its not just gripping the surface, way less chances of it flaking off the exhaust

@djevilj66 4 жыл бұрын

@John Nelson thanks man, but it still didnt stand the test for some reason it didnt hold up for me

@bigdeal87 2 ай бұрын

Holyshit i look 6 yrs later how did it last?!

@NOBOX7 2 ай бұрын

Terrible dont buy it its no good

@bigdeal87 2 ай бұрын

Thanks anything better you would recommend?

@colbolt54 Жыл бұрын

Just place a Mica sheet over the hole and forget the eyepiece

@harry9392 4 жыл бұрын

It's not glue it's a mixture of steel and epoxy that's why it's called quick steel

@NOBOX7 4 жыл бұрын

what's your point , i found it to be worthless foe any application , after this test we can see it crumbles to powder and does not even bond to itself

@harry9392 4 жыл бұрын

@@NOBOX7 I found when mixed well it worked great but It won't bond glass to metal but is great for metal to metal.

@amandacontreras7549 3 жыл бұрын

I think the point is: read all instructions and know what the product is for before conducting a demonstration; which in this case fails, not because of the product but user error. I believe if one is being paid to conduct an experiment with a product then that same person should uphold higher standards and conduct the experiment with regard to the product’s ability. For example: on the packaging the product stated it is for filling in holes and cracks on vehicles.... I’m sure you had the best intentions but unfortunately you might have mislead people to think this product isn’t any good. Now we who are looking for truth about the product, when we stumble upon your video and watch it, leave just as confused as when we came without clarification on the product. That’s the point!

@ARustyGamerPlayz 3 жыл бұрын

Or just guess how to use it ??

@NOBOX7 3 жыл бұрын

id doesnt matter how you use it it sucks buy it if you want

@NOBOX7 3 жыл бұрын

this video is not the only time i used it

@catherineharris4746 11 ай бұрын

5 year's later, how's it holding up?👍

@joemama3372 10 ай бұрын

Answer already in the video at 10:15

@ARustyGamerPlayz 3 жыл бұрын

Did you even read how to use it ???

@NOBOX7 3 жыл бұрын

yes so big de l i was close to the ma temp and i have used this worthless crapp before this test , i threw the rest away , it sucks buy all of it man its all you brother

@drtravismrtravis9394 4 жыл бұрын

Just put some on my muffler as an experiment

@NOBOX7 4 жыл бұрын

Let us no how it goes friend

@NickRoeder 3 жыл бұрын

How'd it go?

@beep_beep_beep 4 жыл бұрын

It's not a glue. It's a filler. You're using it wrong

@NOBOX7 4 жыл бұрын

this was a test to see what this stuff is all about , i wouldnt use it for anything after what i saw , jb weld is way better

@Bsktballa2324 3 жыл бұрын

NOBOX7 i was in a rush and saw this on the shelf at ACE. I’m applying it to my turbo exhaust manifold stud you think it would hold up against that temp?

@WesternReloader 11 ай бұрын

Correct. It’s not glue, it’s raw material filler, like filling weld

@noeaguinaga4018 2 жыл бұрын

Sand doesn't get muddy lol

@ThatDamnPandaKai 2 жыл бұрын

I tried using this in my grill and the stuff just fell apart; It's garbage. I cook my steaks to medium, not 2400 degrees!

@chuckychuck Жыл бұрын

Well on a grill with animal fat?? Sounds like you didn't clean it before you apply it🤣🤣 human error not product error, most of these bad review comments are from humans errors.

@UNcommonSenseAUS 3 жыл бұрын

*muddy sand water*

@gwright2001 4 жыл бұрын

its not sand, its powdered aluminum, and buy a cheap flux core welder to fix that hole, jesus. you should have watched someone else struggle and saved some time and $$.

@NOBOX7 4 жыл бұрын

its a site glass , not a hole