Quick Tip #03 - Install a PTFE and Backer Diaphragm in a SANDPIPER Pump
Рет қаралды 7,601
10 жыл бұрынA step-by-step guide on how to install a PTFE diaphragm and backer diaphragm.
Please consult your service manual for more information, or visit sandpiperpump.com/.
@fffffrankkkk 9 жыл бұрын
Is it the same procedure with the S20B3P2PPAS000 ??, the backer diaphragm in this NonMetallic S20 is a smaller diameter than the PTFE one, and in the video of the WetEnd Kit installation you guys are explaining it without the PTFE Diaphragm
@michaelcostello6991 4 жыл бұрын
I tried this but no good. The outer steel case does not fit over the white ptfe part. I had to discard it. I would have had to force the steel cover on and damage the ptfe white part. The previous two ptfe parts were in bits when I inspected the pump. Not impressed. !!!!!!
@michellemiller326 4 жыл бұрын
Hi Michael - If you have any questions, please feel free to contact our technical support team. They're happy to answer any questions you have: WRM.AfterSales.SP@idexcorp.com. Thanks!
Springer Pumps Maintenance & Repair
Рет қаралды 8 М.
PSG, a Dover Company
Рет қаралды 110 М.
Water Engineering
Рет қаралды 10 М.
KingStore_astrakhan
Рет қаралды 4,4 МЛН
ProTech
Рет қаралды 52 М.
One More German
Рет қаралды 1,5 МЛН
i-shoppers обзоры
Рет қаралды 1,9 МЛН