Quick Tips for Using Effects with Pioneer DJM Mixers

Рет қаралды 83,223

Күн бұрын

Mojaxx demonstrates three simple techniques to make the best use of the effects section of any recent Pioneer DJM mixer.
www.djcity.com
/ djcity
/ djcity
www.mixcloud.co...
/ djcity
/ tvdjcity

Пікірлер: 50

@djmadbwoy4806 4 ай бұрын

Wowww I needed this video 9 years ago

@lcdjloucherifi9019 3 жыл бұрын

Wow thank you for this video!! I’ve always been a vinyl queen but have finally got my new set up, CDJ-2000 nxs with the DJM-750....have been struggling with the effects a lot, especially the delay and echo. I didn’t even know about settings the tempo for the effect. Would explain my struggles. This tutorial has literally changed my life! 😆

@Mssngmrblz 9 жыл бұрын

that doubling effect tip is deadly!!! NICE ONE!!!

@florenthacq6963 4 ай бұрын

Thanks for the tips, the one about choosing the channel crossfader in order to avoid cutting the effect is super useful 🙏

@olegiezer 2 жыл бұрын

That delay tip is money! Thank you!

@derrickmartinez6854 7 жыл бұрын

I'm about 2 years late on this comment so I'm sure many of you watching know this, but I've also discovered that if you apply the delay level depth to about 1 o'clock, you can also use the up fader in the same motion as you would if you were doing a post-fader echo out. It would be an up down motion with the fader. It sounds pretty much identical. Seems like the post-fader also applies to the delay. However, I'm not sure if that's possible with the post-cross fader. Hope that made sense.

@jemmanuellrt 2 жыл бұрын

Thank you for all your superb teachings brother‼️👍🏿💯

@djayr1soulfulhouse838 Жыл бұрын

Cheers bro been watching DJ spen using echo trick. Just purchased and xdjrx3 and didn’t know how to do it

@hoojchoons2258 3 жыл бұрын

Arh the Hooj Choons T shirt :) I had one back in the day that had something along the lines of "occasional providers of half decent house for a fucked up world" on the back :) Man I miss the early 90's!

@conormorgan1182 9 жыл бұрын

Any chance you could do a video on mastering your recorded DJ mixes?

@Mojaxx 9 жыл бұрын

I'll certainly add that to the ideas pot, thanks.

@JadoreAllan 9 жыл бұрын

Yeah, I agree with Conor Morgan. Please do a video on mastering recorded mixes.

@conormorgan1182 9 жыл бұрын

MojaxxVDJ Thank you :)

@Mojaxx 9 жыл бұрын

Conor Morgan It's in the works, schedule is pretty full at the moment. Hold tight.

@samarthdora4490 6 жыл бұрын

Seen LAIDBACK LUKE do the delay effect trick

@badrix6 9 жыл бұрын

Quick question: I've got a ddj sz, are the effects post fader on this thing?? It doesn't seem to work for me! Thanks in advance. Great vids btw, I really enjoy them!!

@festaloteltv6482 2 жыл бұрын

Can we do that “echo” cut effect with djm 400? Thanks!

@thebachelordj 9 жыл бұрын

Cool tshirt! RIP Hooj

@DJSTEVESTONE 8 жыл бұрын

+Chris W You can get them from ebay naughteesclothingltd and a lot more old skool & DJ T's I have and very good quality lots of colours £8.99 + £2.50 p&p

@MrFullyCharged 6 жыл бұрын

So you just defined a "session tempo" to the tempo-based FX module, which remains in place regardless of the tempo-destination knob, correct?

@MrFullyCharged 6 жыл бұрын

I ask specifically because I have the Denon Prime setup (X1800 and dual SC5000s) and cannot do as stated in the manual to "define a session tempo for the fx", which is really breaking my heart! It makes mixed-genre and mixed-source sessions impossible for the fx module to appropriately process.

@mrjfadams1 6 жыл бұрын

Hi moe, needing to connect the rmx 500 to the djm 450,,, was under the impression I could do this with the top USB input send/return. It's not working

@lustforlow-end6022 3 жыл бұрын

Just go over the master output via rca. My DJM400 doesn’t have send/return so that’s what I had to do & it works well. Go master out rca to send on rmx, then return on rmx to your speakers 👍

@mrjfadams1 3 жыл бұрын

@@lustforlow-end6022 hi thanks... No longer running with this set up... Switched over to the S8 and Maschine 👍

@SuperBaconFishing 4 жыл бұрын

Does any software still support the DJM-800?

@brendanwaldon2117 2 жыл бұрын

Super helpful!

@26szachy 9 жыл бұрын

great, thx

@marcelmarechal1420 7 жыл бұрын

Well what if I got 2 cdj 1000 mk3's with this exact mixer?

@MrTech1210 8 жыл бұрын

Hi.... I've just bought a DJM-700 and was experimenting with this roll feature. I'm confused!!! After creating a 8/1 roll sample, when i assign the roll back to a channel, i cannot use the 3 band equaliser on that roll sample! I would really like to create a loop and be able to use the 3 band equaliser on it. Am i doing something wrong? I hope you can reply to my question, it will be very much appreciated. Cheers, Andy

@maranezzi21 7 жыл бұрын

on djm 800 you can't use equliser on loop (roll), so i think it is the same on your mixer. But it really sucks not being able to eq the loop!!!!!

@davidlogan8905 7 жыл бұрын

You could kind of split the difference between the sample and the main track, if layering like that is something you think would sound good. Just set the roll effect depth around, say, 8-10 o' clock and EQ the track as per usual. You can also use the colour FX here to create some nice layered combinations.

@davidlogan8905 7 жыл бұрын

Also, it's a good idea to use the decimal feature mentioned in the video when creating roll effects that long (4/1 or 8/1). Some BPMs are not entirely accurate loops. So, for example, 134 BPM roll will not match up with a track playing at 134. The DJM automatically sets it to 134.2, but even 134.0 won't be right. In this event you will need 133.9 BPM to create a perfect loop.

@MrDjFrisco 9 жыл бұрын

Good stuff to know.

@marcelmarechal1420 7 жыл бұрын

I have old Hooj Choons on vinyl.........cafe del mar, game master and some others

@jtv0 5 жыл бұрын

Does the S9 have post fader effects?

@7t272 6 жыл бұрын

If your playing a track that is say 80bpm and the next track you want to play is 120bpm can you set the echo to 120bpm on the track that is playing at 80bpm ? This would be great if you can as thinking about buying Djm 750 Thanks!

@davidlogan8905 6 жыл бұрын

In this particular example, you probably could do it. Setting the echo to 5/8 or 6/8 can produce some funky effects - kind of like the 3/4 beat tempo and the 1/1 beat tempo brought together. So in your example, since 120bpm is 1 and 1/2 times 80 bpm, you could set the effect to 120bpm and at 1/1 beat tempo, and this would produce (in the 80 bpm track) an effect of 6/8 beat tempo. It could get messy, so you would probably have to choose your tracks and moments wisely.