Probably the best guide I've seen to adjust FD.

Can't thank you enough, i've been messing with the cable for hours, after your video I fixed my gears in one minute flat.

Thats a perfect explanation! Thanks a lot!

Highly efficient video! Cheers!

Honestly best, most straight to the point video I’ve seen.

Very good. Efficient explanation. Thanks...

Thanks so much! Sorted this in minutes!😁

Great guide. Just bought a batch 707 and the front derailer keeps giving me problems. Took it into the mechanic once seven days later I had to take it back because somehow when I pedal from a fresh start my foot just drops with zero tension momentarily then catches in gear again. It's so annoying

I've solved the problem of chain rubbing in the higher gears but now it's doing the opposite 😂 even with this guide I don't know what im doing, the cable no matter what I do is never loose.

Very good video and a great quick guide

For a 2x yes.. But a 3x, I find it so difficult.

Great video, thanks!

THIS GUY IS A LIFE SAAAVERRR

Thank you for the video. Currently taking the gamble of tuning bike up instead of buying new one

BUT REMEMBER WHAT. How are we supposed to sleep at night not knowing what to remember

Thank you so much!!

something to understand THANKS!

Thanks bro! I bought my first actual mountain bike a couple of weeks ago and the front tube was worn and got a random hole. When changing it I noticed rubbing when in the highest cog. I naturally panicked and tried myself, failed, found your vid and now I have no more rubbing in either of the two cogs!

Perfect. Thanks buddy.

It works bro thank you❤❤

Thank you😅

Easier way. Completely remove front derailleur, dump in the garbage bin and convert to a 1X.

Thanks a lot

What if the cable is loose :(

i tried adjusting it it worked but it doesnt wanna switch now. Its not like a very bad thing as i dont usually switch the front gears i think its probably because the cable disconnected

wait so with the barrel ? ... -.- ughhh that barrel throws me off .... so i loosen the barrel to make the wire loose and then adjust h and l screws?

2 things 1: r u south african like me 2: it really helped

How would I change the height of it

Friction schifters are the best way to use a front derailleur

fixed the issue by brute forcing the problem : I run non indexed front

I unfortunately don't have one of them things

I bought cycle last week, these gear cycles are not as simple as we think, adjusting them need more trial and corrections. And disc brakes they're another subject altogether. Now i need to work on wheel truing.

Woah that’s a big cog

How do you make in straight

Bro what type is your front derailleur

It won't work idk why what do I do

My limit screws don’t adjust. It’s an old xtr

kzfaq.info/get/bejne/sNt2oM53mqzTdI0.html This is a video from "RJ the bike guy". Years ago I've learned to align and adjust the front derailleur from his video and no problems with a 3X since then. Once you learn the correct procedure it's so easy. I've learned from experience that some indexed front shifters have different pull ratios, talking about Shimano stuff and not all front derailleurs work with all chainring sizes. It's trial and error if you mix stuff. If you had enough of adjusting just throw a friction shifter for the FD.

I NEED AN ADULT AROUND ME!!! I DONT UNDERSTAND ANYTHING!!! I WANT MY BIKE TO BE FUNCTIONAL AHAIN!!! WAHH!!!! ToT

the what?😂

Get rid of this old technology😮 time to move on to a new design

Really - nightmare? Just learn how the component works, my brother. The only nightmare is clients who refuse to care for their bikes.

Front derailleur. 1995 called, can you come home 😢

Bad method