No video
R&DURO Easy Clutch Review | Easiest Clutch I Have Ever Used | Highland Cycles
Рет қаралды 11,839
Жыл бұрынThe R&DURO easy clutch is the easiest clutch I have ever pulled!
Get One Here www.rnduro.com/?ref=nwflodu0
Join Our Crew : bit.ly/2SHy1Fk
Want to buy me a coffee www.buymeacoffee.com/highland...
Want to support us and save money?
1sttrackmoto.com/highlandscyc...
veemototires.com/ Use code “highland"
chinmounts.com/?ref=HIGHLANDC...
If you want to support this channel on Patreon, here is our page:
/ highlandcycles
If you like to shop on Amazon and you want to help us out, use this link www.amazon.com/shop/highlandc...
And then shop for whatever you want. It really helps us out a ton and we appreciate it very much
Want some Merch? bit.ly/39rkdXm
Check out our social media too:
Facebook : / highlandcycles
Instagram : / highlandcycles
TikTok: @highlandcycles
Now…. Go Ride Your DIRTBIKES!!!
#gospeloftwowheels #dirtbikes #highlandcycles
Please support our sponsors
www.tbtracing.com/
xcgear.com/mako-360/
www.2strokeheads.com/
nitromousse.com/
www.systemtechracing.com/
ddcracing.net/
enduroeng.com/
bulletproofdesigns.com/
www.evanscoolant.com/vehicle-...
www.wlfenduro.com/
extreme-parts.com/
veemototires.com/
@highlandcycles Жыл бұрын
The affiliate link is live www.rnduro.com/?ref=nwflodu0
@Tlisotta2010 Жыл бұрын
Thanks Morgan! When I click link no discount added. Is there one? Really interested.
@highlandcycles Жыл бұрын
@@Tlisotta2010 right now there isn’t. His margin is too small this early in production
@Tlisotta2010 Жыл бұрын
Got it! Still ordering! Thx for what you do!
@highlandcycles Жыл бұрын
@@Tlisotta2010 you will love it
@GrayRidesEnduro Жыл бұрын
This company is the real deal. While at Silver Kings I broke my clutch perch and remembered that this clutch system had the redundancy to fix my clutch and give it the EZ pull. I tried to buy it but he stopped me and asked to see my bike to make sure it would fit up alright. I rolled my bike around, went to the award ceremony, and came back. He told me that the system wouldn't work with how my clutch was broken and instead of selling me a very expensive part that I couldn't use, he repaired my clutch with his repair kit FOR FREE. He not only gave and installed a $75 part free of charge but more importantly he didn't take advantage of the situation and sell me something that I couldn't use. He launched the company at Silver Kings and immediately had lifelong respect from me
@BERZERKERSV4 Жыл бұрын
until you need spare parts as Morgan pointed out... at that point your SOL..
@highlandcycles Жыл бұрын
Only for a bit. They will be available within a month
@GrayRidesEnduro Жыл бұрын
@@BERZERKERSV4 dont think that reply really makes sense to my comment. but even if something breaks with the EZ clutch pull system like Morgan explained in the video, you just back out a screw and youre back to youre old clutch. Not leaving you stranded
@averykienbaum2904 11 ай бұрын
Hehe he's a killer dude! I think I might cheat and buy the system maybe🤷
@GrayRidesEnduro 11 ай бұрын
@averykienbaum2904 bro im hoping to get a new bike soon and I 100% am gonna get it on it
@jeffmurphy7600 Жыл бұрын
I totally agree with how this could be very beneficial for hard enduro or someone who does not have a normal functioning left hand. Anything that will help keep people riding dirt bikes longer is a good thing!
@olliechristopher467 Жыл бұрын
The Midwest is really hard to get dialed in. This is the first I heard of this one. Ingenious!!! Thank you Morgan. Anything that can help out my 62 year old arthritic hands is welcome. This might be a better option to try than relying on a Rekluse....
@jeremybraswell6858 Жыл бұрын
Really sir you've had lots problems with you mid-west leaver? What kind of problem sir ? Just curious mine have been excellent yes you have 2 adj. it 1 a month if you ride evey weekend or week but that was normal clutch wear 2 me gess I'll Starr double check that it really clutch needed adj. or the adj screw is moving? Haven't thought about that till right now could always a dot of blue locktite on it if this is happening.
@joesmith71 Жыл бұрын
Thank you Morgan and Ran!!! Rode with mine today for the first time. Amazing. Ordered the night I watched this video.
@rz350yam Жыл бұрын
At $400, I'll stick with my Midwest. Mine works fine on my TE300, and definitely helped reduce clutch pull and my fatigue towards the end of the day. I'm 65 and still riding...
@theelmoreteam9097 Жыл бұрын
Love the vids. Thanks bro. Keep it up
@brookefawcett4116 Жыл бұрын
Awesome review Morgan!
@FrankL-io1ou Жыл бұрын
Awesome! Thanks for the overview and link. I did not like the feel of the Midwest Mountain lever either.
@P4ddyC4ke Жыл бұрын
Great review on an exciting product!
@dynamitecreekvet 11 ай бұрын
Worth checking out. I hated the Midwest, but I LOVE MY CLAKE one finger clutch. They are a bit finicky to bleed but an amazing piece of aussie engineering.
@highlandcycles 11 ай бұрын
Agree. This is a really cool solution
@panic-revv85 Жыл бұрын
A nice aftermarket lever like the streamline work very well.
@coreyseefried6222 Жыл бұрын
Great review!
@highlandcycles Жыл бұрын
Thanks!
@jerryhamilton8003 Жыл бұрын
I just adore that white and black checkered floor can't wait to meet you
@highlandcycles Жыл бұрын
Thanks.
@MikeRay1978 Жыл бұрын
I think I understand it and what w great idea. Something like this doesn’t happen looking at things head on. Thinking outside the box.
@richardhartley1705 Жыл бұрын
Very clever device 👍
@milesstandish7907 Жыл бұрын
I have bad arthritis-to the point when I go to tap the rear brake in the air, my left hand can screw up and I end up tapping the brake before I get the clutch pulled in. I installed a Recluse so I no longer have to pull in the clutch, but simply putting a Flo clutch lever on eliminated my slow pulling left hand problem. Flo's adjust in more than stock, so you don't have to extend your fingers out nearly as much, which obviously makes clutch pulling quicker, but also easier as well. They install in a minute and only cost $70
@jimmyneutron6127 Жыл бұрын
Some parts are just Gucci bag equivalent like anodized axle blocks. This actually has a purpose. So great innovation.
@d.brayman3165 Жыл бұрын
Very cool!!!
@MitchOfCanada Жыл бұрын
best help I ever had is move your levers in so you are grabbing near the ball not the middle of the lever. end of my lever is on the middle of my grip (middle finger clutcher) If you are a pointer finger person, then you need to move it even further away from the end of the bar... I understand having it that far over if you have short fingers, but you never really need to fully disengage your clutch, maybe when its cold.
@highlandcycles Жыл бұрын
That is great advice. I move mine as far in as possible
@SkankHardEnduro Жыл бұрын
I got mine yesterday - got my first dirt bike(2020 300XCW)at age 49, now 52, all I do is hard enduro, after hours of torture I'd go from 1 finger to 2 and 3 fingers working that clutch, Id get slower and sloppier making more mistakes and dropping my bike. If this can help a little bit, I got no issue spending $400. BTW I can see why its cost is $400, they put in lots of R&D to build this unit and from what I see it's a quality product. I will install it today and give my honest opinion after a long day of torture. I guess suspension and gummy tires makes you less of a man as well?🖕🤣
@MechShark Жыл бұрын
I look forward to your follow-up. I have bad wrists, strongly considering one to replace the drag issues of Midwest, despite the ridiculous cost.
@Bigbodysquid250x Жыл бұрын
How was it?
@SkankHardEnduro Жыл бұрын
@@Bigbodysquid250x installed and the next day I broke out with shingles. soon as i can ride i share.
@tarded400 Жыл бұрын
That’s super cool
@billdeck9766 Жыл бұрын
Looks like it is an updated easy-clutch. Even better. I have the easy-clutch on my 85.5 Husky 400wrx
@philipsmith6152 Жыл бұрын
Another great review, MidWest gave me a wider clutch engagement, which I like, but to set it up right, you end up with bad clutch drag. Not for me either
@SM-yq9ig Жыл бұрын
Thing could be great for riders with injuries, Or arthritis .. good alternative to a rekluse
@WildAzzRacing Жыл бұрын
LOL! I think it's funny that now guys with hydraulic clutches are wanting it even easier! I love my cable clutch on my KDX with the extended actuator (at the clutch) and my cable clutch is super reliable and low maintenance. I have a hydraulic on my GasGas and yet my KDX has better feel and is a lighter pull. Anyway, I do like that Rnduro product as it's a really clever solution. I hope they are successful with it. Lastly, why you don't have to take tension off the Rnduro unit spring is that springs only die from work and not due to a constant state of tension or compression. A perfect example of this is magazines for firearms. You can keep them loaded indefinitely without issue. However, use a magazine a lot, cycling from compressed to relaxed hundreds of times, they will lose strength and eventually fail. I've even proven this on one of my dirt bikes that lived in the back of my pickup. It was strapped for almost a year (with no stupid fork brace) other than when being ridden or maintenance was being done it. Never a problem and my suspension performed like always.
@highlandcycles Жыл бұрын
The YZ I rode last week’s clutch was so nice and light
@stevenasommes Жыл бұрын
The site says for Brembo master cylinders. I guess I'm out with my Husqvarna then. Tok bad. I have used a clake before and it was very nice to use. Easy and good feel.
@highlandcycles Жыл бұрын
They are working on the husky part now. Hopefully soon
@Matthew-wn8oq 4 ай бұрын
There are less and less cable clutches , even Suzuki has gone hydraulic 😂 miracles do happen.
@lbever454 Жыл бұрын
While I considered one of these for my 2024 300 XC-W. After much consideration I decided to stick with a Rekluse. I have had them on my last 4 bikes. At 67 years old, and bad wrists a Rekluse has several additional advantages than just reducing the clutch lever pull.
@highlandcycles Жыл бұрын
Do both! Would be a wicked combo
@outfitr9703 Жыл бұрын
Me too, 68 years old, LOVE my rekluse. I'll never ride again without it.
@onthethrottle7104 Жыл бұрын
@@highlandcycles I was thinking the same thing since the Recluse makes the clutch pull much harder...I don't run Recluse
@C3Enduro 5 ай бұрын
Morgan, are you still running this? How about a long term review video. I am looking at either this or the Clake. Lot's of information on the Clake and would love to see a long term review of the R&Duro. Thanks! Love your Beta content.
@highlandcycles 5 ай бұрын
I am and I will do a follow up vid!
@davenawahine4428 5 ай бұрын
Looks like a clake copy. I didn't get along with the clake, currently using a 9 MC and Midwest lever. I'd try it if it were not so pricy.
@racerrick39 4 ай бұрын
Sweet Rexy hat!
@highlandcycles 4 ай бұрын
Heck yeah
@chopshopchopper 6 ай бұрын
Awsome design. Kind of like a compound bow cam...
@highlandcycles 6 ай бұрын
Yep. Super cool
@MechShark Жыл бұрын
It's reeeaallly tempting, but that $400 price tag I've decided is pretty insane for this tiny little gadget. I already thought the Mako price was asinine and I love that stupid thing. I think the "it's only $400" list is getting too long 🐒💸
@highlandcycles Жыл бұрын
Careful. If you try this you’ll feel the same way
@MechShark Жыл бұрын
@@highlandcycles I'm turning into Jeff. "Yea I think I'll throw 10k into it" 🤡
@highlandcycles Жыл бұрын
@@MechShark hahaha. Just testing for you guys.
@SkankHardEnduro Жыл бұрын
How adjustable is the lever itself? from the looks of it in your video it seems pretty far out, I use 1 finger, as the day goes on a second and third finger come into play. Lol. I like the clutch grab just pass my closed finger knuckles, don't like to reach too far. Can it be adjusted closer and still grab and disengage? Maybe 1 more video showing the adjustability?🤔 Thanks for posting.
@highlandcycles Жыл бұрын
Very adjustable. You can bring it way in.
@shanenetter2015 Жыл бұрын
I like the concept, but not the price. The clake one clutch is also only $28 more.
@highlandcycles Жыл бұрын
Gotcha.
@flingndirt_UT Жыл бұрын
I agree, not sure how this really stacks up to the Clake and it's the same price pretty much. Only benefit to this over the clake is that you can run flag guards and not be forced to run wrap arounds.
@highlandcycles Жыл бұрын
@@flingndirt_UT and if it has problems you can disable it fast. We have a customer with a clake and he has had it fail a few times. It needs to be bled often. Both are good. I just like this better because the lever feels like a normal one. The clake feels weird to me.
@flingndirt_UT Жыл бұрын
@@highlandcycles Gotcha...!!
@stoplogicmotorsports Жыл бұрын
It's like a fancy new version of that old moose clutch pull assister.
@highlandcycles Жыл бұрын
Exactly
@flingndirt_UT Жыл бұрын
@@highlandcycles I'm not sure that's a compliment as that old moose puller was jenky at best..
@highlandcycles Жыл бұрын
@@flingndirt_UT I have a buddy who runs one on his KX500 all the time with no issues. And yeah, even now. He rips on that KX
@orlandoberry4031 Жыл бұрын
“I kind of wish I never felt that”
@1176hambone Жыл бұрын
Its the break over in the stock clutch that bugs me for fanning the clutch for manual traction control. Like a gun trigger, the "wall" is undesirable...for me. I was hoping this would solve that. For me, this would just make more difficult to modulate with precision.
@highlandcycles Жыл бұрын
I wish you could feel it while riding. It goes away. My good friend (foxy bibs) who is much better than me, loved it even though at first it felt funny.
@natipinko8484 Жыл бұрын
True, it should start soft, that’s the key to it
@1176hambone Жыл бұрын
@@natipinko8484 I've improved the leverage ratio on my stock setup by moving the perch as far in(to the right) as possible. This puts my pointer finger towards the end of the lever. Doubles the resolution of the action. Helps. Will try the RNduro at some point.
@rztrzt Жыл бұрын
Clake ftw.
@scottphillips445 Жыл бұрын
If you are a clutch abusing 150SX pilot you use the clutch to control your rpms. Auto clutch is a totally different animal.
@caseyyork641 Жыл бұрын
Would this work on a 2016 SX 65? The web page says works on Brembo....Not sure it the 65 uses Brembo....Don't have access to the bike to check.
@robtoole1480 Жыл бұрын
I was sooo ready for the spring and innards to go SWANG across the shop. How much does the system weigh? I can feel the weight of Full wrap Bark busters compared to flags so do you notice it and is it unbalanced just the left side?
@highlandcycles Жыл бұрын
I can’t feel it at all. I’m not sure the actual weight. I’ll see if I can find out
@RROSS399 Жыл бұрын
Do they make this for braktec clutch?
@Enduro.Trials Жыл бұрын
Hey Nancy I got a question for you - J/K I don't. I just figured it was cool to call you Nancy now. 🤣
@jamesking4225 Жыл бұрын
Do a verses video against the Clarke one light
@highlandcycles Жыл бұрын
Don’t have a clake
@alexad669 3 ай бұрын
This device is more expensive than Clake. The lever is still huge compared to Clake, which is very inconvenient to operate with one finger like on Clake.
@highlandcycles 3 ай бұрын
All true but I like the feel of this better.
@MrBrandonh98 Жыл бұрын
Curious if you're still running the coutershox. If not why not? I almost bought one of those awhile ago. Money better spent on the RNDURO clutch lever? Does it work with a cable clutch?
@highlandcycles Жыл бұрын
I do still run the countershox. It wasn’t on in this video because I took it off for the hard enduro. I don’t think they help Much for that kind of riding. But my normal style they help a bunch.
@deonmcdaniel7123 3 ай бұрын
Great vid do you still use this ?
@highlandcycles 3 ай бұрын
Yes I have one on my Beta too! I love them
@flingndirt_UT Жыл бұрын
Having wrist issues and now getting arthritis in my hands anything that helps with relief is certainly a welcome item. I however still question how much it really helps, I'm currently using the MidWestEng lever on my 2020 300 XC but for some bizzare reason it's just not helping much on this bike where it's been wonderful on other bikes. So I've been looking at the Clake which is $425 but it's supposed to relieve up to 75% of clutch pull and this EasyClutch is only up to 30% for $400. Seems to me there is a significant desparity in what you're getting per dollar here?? The only reason I've not bought a Clake yet is that they are honking huge and you really need wrap around guards and I won't use those ever again as they were the cause of my jacked up wrist so yea, I'll pass!!! This new option sure looks nice but for $400 I really wonder if it's worth it for only a 30% reduction......
@highlandcycles Жыл бұрын
I 100% guarantee you will notice a massive help with this. It’s incredible
@highlandcycles Жыл бұрын
I may have misspoken about the amount of help. I’ve felt the clake and I think this does more.
@scooterprint Жыл бұрын
Hey Morgan, I've been off a dirt bike for a while now, and I'm looking to get something noob-friendly for single track/trail use. I have experience with the honda CRF250F that I enjoyed, and a YZ450F that I didn't enjoy (way too snappy/too much power). I've been eyeballing the Beta 200 RR and Husqvarna TE150i, and a friend mentioned possibly the Beta Xtrainer 300. I am a bigger guy and all of my friends are saying that the 150/200 won't cut it. Any input? Thanks!
@Riddz41 Жыл бұрын
300 rr
@scooterprint Жыл бұрын
@@Riddz41 unfortunately I think that's just a bit too much bike for me.
@onthethrottle7104 Жыл бұрын
Have you ever just tried a 9MM clutch master cylinder? Those 9MM have such an easy pull, so smooth and silky...
@highlandcycles Жыл бұрын
Yes. This is even better
@onthethrottle7104 Жыл бұрын
@@highlandcycles Wow, could you imagine both together?
@highlandcycles Жыл бұрын
@@onthethrottle7104 I know
@edog5707 Жыл бұрын
Can i use my ASV or stock levers with this system?
@highlandcycles Жыл бұрын
No. It requires their lever. It is an exact copy of the stock shape.
@tself77 Жыл бұрын
Would it work on a Magura set-up on a Husqy?
@highlandcycles Жыл бұрын
Not yet. They are working on it
@stangindude99 Ай бұрын
Morgan! I saw that you got shorty levers?! Did the clutch lever for this reduce your leverage at all? 🤘
@highlandcycles Ай бұрын
It does but with the easy lever system it’s still less pull than stock
@stangindude99 Ай бұрын
@@highlandcycles thanks man, I was between this and a clake after riding my friends with clake.
@highlandcycles Ай бұрын
@@stangindude99 both are good. I like the R&Duro better because if at anytime you break something or have an issue (which I’ve never had), you can pull one small bolt and it’s back to normal.
@robertbaker9329 Жыл бұрын
I have a yz250x and I’ve never rode a ktm but I’ve always heard ktms have a light clutch pull is this not true?
@BERZERKERSV4 Жыл бұрын
the KTM clutch is hydraulic and is beyond smooth and a super easy pull...if you have a physical ailment on your left hand , sure this $400 no spare parts available gimmick may help.. The Yz250X clutch is cable , prehistoric and feels like pulling a boat anchor compared to hydraulic... BUT I ran a 6 hour NPEG event (Cancun Classic 2019) after racing a YZ250 for years and switched to a KTM 300 with a hydraulic clutch...zero arm pump and the Brembo felt like butta throughout the entire race... Why Morgan is pushing the grossly overpriced gimmick is beyond me...
@highlandcycles Жыл бұрын
Because it works. Not everyone needs it for sure. If you’re strong and you ride easier stuff then it’s not necessary. But if you ride the really hard stuff it’s awesome. Like I said, I could have skipped plastic and graphics and paid for it. Why are you being so angry. If you don’t like it then fine. If you think it’s dumb then fine. You’ve spoken your mind. Does it make you feel better to keep going? I’m not sure where you live or even who you are but if you’re ever near us, let’s go ride and I’ll let you feel it.
@PBmxer Жыл бұрын
cool product. only works with brembo. i guess once you start using it you atrophy and can't go back. i'm a clutch abuser since I ride hard enduro on a 4 stroke. this looks promising.
@highlandcycles Жыл бұрын
You don’t atrophy if you exercise
@shinebright78 8 ай бұрын
Does it work on crf 22 hydraulic clutches
@highlandcycles 8 ай бұрын
No. Right now it’s just for brembo master cylinders
@shinebright78 8 ай бұрын
Thanks appreciate the response.
@snowrider4495 Жыл бұрын
Can you rebuild crankshafts
@highlandcycles Жыл бұрын
No. We have crank works do it
@snowrider4495 Жыл бұрын
@@highlandcycles what's the website or phone number?
@highlandcycles Жыл бұрын
@@snowrider4495 Google
@snowrider4495 Жыл бұрын
Captain obvious! LOL I keep getting strange websites.
@scottcoplin8322 Жыл бұрын
Great video, waiting on affiliate link.
@highlandcycles Жыл бұрын
It’s there. Look in description
@scottcoplin8322 Жыл бұрын
I saw that, was hoping there would be a discount and a kickback to Highland Cycles.
@highlandcycles Жыл бұрын
@@scottcoplin8322 there is a small kickback but the margin right now is too small to discount. Brand new company
@scottcoplin8322 Жыл бұрын
@@highlandcycles Understandable, at least you are getting something out it. Great work, keep it coming.
@ronhartle3268 Жыл бұрын
It looks like the spring goes through the pin. Optical illusion.
@highlandcycles Жыл бұрын
Pin stops just before the spring.
@robmccauley1073 Жыл бұрын
If your using a hydraulic clutch and you need an easier pull….. You may need Vagisil instead. Lol
@johnmccool7551 Жыл бұрын
Didn’t they make an ez pull along time ago .??????
@highlandcycles Жыл бұрын
Yeah. The cable one
@sandysmith7485 Жыл бұрын
-Interesting, but how many fingers does it take? Ride safe my 2 wheel friends
@highlandcycles Жыл бұрын
1 or 2
@chadmanproductions Жыл бұрын
I love the idea, but I use a Rekluse😁 I will say I'm a little suspicious of any dirt bike part that comes in a waterproof-looking Pelican style case. It just screams Apple to me.
@highlandcycles Жыл бұрын
Hahaha. Fair enough. If you use a rekluse you probably don’t need a lighter pull.
@motogp1gprix1 Жыл бұрын
The Clake is better and costs less actually. Cool product but I'll take a Clake over this any day.
@racesla Жыл бұрын
How would you compare.them?
@motogp1gprix1 Жыл бұрын
@@racesla The Clake essentially does the same think with an adjustable, spring loaded cam however, the lever is much longer giving ton of leverage. The lever itself is unbreakable and for the same money, instead of just an add-on piece, you get an entire master cylinder assembly so you're stock one can go in your spares box. Also, because the lever is designed for true, one-finger use, you can adjust it to sit against the grip when fully disengaging the clutch if you want without hitting your other fingers. This is how I have mine adjusted and the engagement point is set about 1/2" from the handlebar. This lets me operate the clutch in the strongest part of my grip and feels very natural. There is no other clutch lever that can be setup this way and there is really no going back for me now.
@stevejones6647 Жыл бұрын
@@motogp1gprix1I have to agree that even though I’ve never seen or heard of this device until now, I have a very hard time believing it’s better then the clake one light. My buddy has a one light and you can almost “feel” what the rear tire is doing through the clutch lever. I honestly thought the clake was a gimmick until I tried it. It works far better than I ever thought it would
@richardhartley1705 Жыл бұрын
How much is it👍
@user-gf1yg6nj1v Жыл бұрын
$400…OUCH !!!!
@PrimalEnduro Ай бұрын
Meh, it would be nice if it was $200, but for $400 why not get the Clake One Light clutch? Bolt it on, bleed it...done!
@highlandcycles Ай бұрын
All depends on what you like. I don’t like the feel of the Clake.
@rjthomasindyusa Жыл бұрын
Your killing me….. lol Looks like it’s time for a new set of handlebars and levers. 🤦♂️
@jeremybraswell6858 Жыл бұрын
You made fun of people like me using the Midwest engineering easy pull clutch lever and stag pegs and all those cheat
@highlandcycles Жыл бұрын
I didn’t make fun. Just said I don’t like them.
@jeremybraswell6858 Жыл бұрын
@@highlandcycles I just picking Mr.Morgan I had 2 take my opertunity 2 keyboard fued with you like you did me about a year back when you made the Rotella & the cheats as I call them I use video have a blessed summer keep posting 4 all of us & don't stop the fun keyboard war we got going 😂🤣😂I like my cheats & my cheap Rotella & enjoy your videos & would enjoy a chance 2 meet & ride 1 day but be lil hard 4 me 2 do I'm in Alabama but hopefully next summer I'd like 2 come out mid west area UT,CO,MT mabey AZ idk we see
@BERZERKERSV4 Жыл бұрын
An answer to a non existent question.., Who has ever complained about a stiff, hard pull KTM/GG clutch?????? Um.. no one… and at $400.. YES $400 !… it is an absolute NO SALE…
@marcusmccormick498 Жыл бұрын
Fact
@highlandcycles Жыл бұрын
Have you raced a hard enduro? No matter how light the clutch pull is, your arm wears out. This helps. Do you need it for casual trail riding? Probably not. Are there also people who have damaged and less than perfectly functioning left hands? Yep and they would love this.
@BERZERKERSV4 Жыл бұрын
@@highlandcyclesnfortunately in Florida , Hard Enduro is no where to be found…. We have sugar sand, mud, humidity and mosquitoes….. I can see the value for the less fortunate with limited left hand function… but numerically, that number is insignificant …. Big fan of your channel and hairline !
@olliechristopher467 Жыл бұрын
When you are riding tight black diamond with constant bulldogging over and over it doesn't matter who you are. It wears you down. This looks to be a great product. As Morgan said a lot of parts on these bikes are expensive. Especially the ones you break because of poor clutch control due to fatigue.
@highlandcycles Жыл бұрын
@@olliechristopher467 amen
@Briank-ef5iq Жыл бұрын
People really spending money on a clutch pull assist!!? Lol most ridiculous thing I ever heard !
@elvispusley3515 Жыл бұрын
Nah, stock is pull is fine. I like my stock brembo. This is Poopoo cockah
@highlandcycles Жыл бұрын
Just like your face
@olliechristopher467 Жыл бұрын
Why do we even have a thumbs down if we can't see it. Keyboard warriors are out in force today!! I'm in the camp of being grateful to Morgan for presenting and reviewing this.
@highlandcycles Жыл бұрын
@@olliechristopher467 hahaha. They are all in their mom’s basement banging away 🤣
Highland Cycles
Рет қаралды 2,9 М.
Cross Training Enduro
Рет қаралды 13 М.
IRC Tire USA Moto
Рет қаралды 130 М.
The Old Man and the Dirt Bike #52
Рет қаралды 867
Highland Cycles
Рет қаралды 23 М.