No video
R5D4 Star Wars
Рет қаралды 1,916
Күн бұрынSTL: fab365.net/ite...
We finally made R2D2's friend, R5D4, which we had been debating whether to make or not.
The reason we were worried is because these supporting characters are so unpopular compared to the time we put into them.
However, since there are quite a few customers who want to complete the set, we made it this time.
The method of making it is almost the same as R2D2, so it is very easy.
However, since there are many parts, there are some things to be careful about.
1. It was designed in an slanted shape to reduce the risk of incorrectly attaching parts. Checking this slope carefully will reduce incorrect attachment. Please check before gluing.
2. The arm must be pulled outward so that it can be rotated down and fixed in its original shape.
Be sure to check the video and photos for details.
Please look forward to FAB365's Star Wars items that will be released in the future, and please make many requests on the request page.
Largest part in printing, size= X 98mm, Y 196mm, Z 61mm, After full assembly size= X 72mm, Y 50mm, Z 135mm
Total Build Time : 27h 40m / Plastic Weight : 120g
@user-sv4zb1xb7z 3 ай бұрын
love seeing some less well known models, they are very cool
@fab365_official 3 ай бұрын
Thanks for watching! Please enjoy~
@Reboot153 3 ай бұрын
The fact that you can get adhesion on those little pieces @0:19 without the use of a brim makes me so jealous! I do my best to keep my bed clean but without enough surface area I just cant keep things stuck to the bed.
@bear8546 3 ай бұрын
Gostaria muito do senhor chegar a impressão de um C-3PO... Seria épico. Comprarei alguns arquivos do senhor daqui a alguns dias... Obrigado 👍🏼
@fab365_official 3 ай бұрын
Thank you for your purchasing of our designs. To make C3PO, we need a lot of plans. But, someday we will make.
@homelander1974 3 ай бұрын
펩시콜라가 떠오르는 녀석이네요. 잘 보고 갑니다~
@fab365_official 3 ай бұрын
언제나 시청해주쳐서 감사합니다!!! 😆
@leoonbee1766 3 ай бұрын
Hola. Todas al piso y sin soportes? Megustan muchisimos las piezas que arman. Voy a probar el de mario bros. Sigan a full que tienen lindos modelos!
@fab365_official 2 ай бұрын
We pursue a design without support.
@stelvio5213 3 ай бұрын
How can an Ender 3 still be used in 2024?
@madnlooney 3 ай бұрын
They are good machines once set up. The issue generally is people want something to just work but don't have or want to know how it works so can't fix simply things
@thomaspc2 3 ай бұрын
I think they use many kind of printers but use the Enders to show that their models will print on anything.
FAB365 3D Printing
Рет қаралды 53 М.