Cafe Racer (Honda CB750 by MEISTER MEGERLE)

Рет қаралды 307,341

3 жыл бұрын

(Legendado em Português)
If you looking for the right wheels/tires for your Cafe Racer project, than this is video is perfect for you.
Here you can see how the choice of the right tires/wheels, can be very important to get the right stance on your project.
The beautiful honda CB 750 presented on this episode, was built by Andy Megerle, Owner of "MeisterMegerle", in Germany.
The other 2 bikes shown on the beginning of this video, were also built by Andy.
One of them is based on a Honda CB900 Boldor, and the other is based on a Yamaha CX 650.
I hope you like it.
My special thanks to Pedro Torres, for his great help with my English.
Photography by Thomas Minde
Here are some interesting links about this Builder:
/ meistermegerle
/ @meistermegerle
Ethereal Dream by Artificial.Music & ASHUTOSH
/ artificial-music
/ grandakt
Creative Commons - Attribution 3.0 Unported - CC BY 3.0
Free Download: bit.ly/3mx5cLS?
Music promoted by Audio Library • Ethereal Dream - Artif...
Track Info:
Title: Ethereal Dream by Artificial.Music & ASHUTOSH
Genre and Mood: Dance & Electronic + Inspirational
Available on:
Spotify: spoti.fi/39WKyPU?
iTunes: apple.co/3wByk97?
Deezer: deezer.com/us/track/1214235532?
KZfaq: • Artificial.Music & ASH... ?
SoundCloud: / ether..
KZfaq Music: music.youtube.com/watch?v=aDe...
Contact the Artist:
Artificial.Music:
aryll@aryllfae.com
artificialaryll.bandcamp.com?
deezer.com/us/artist/9997970?
/ artificial-music
open.spotify.com/artist/2URqg...
kzfaq.info/love/C49uNuU...
itunes.apple.com/us/artist/ar...
fiverr.com/aryllfae/produce-k...
/ aryllfae
paypal.me/artificialmusic?
ASHUTOSH:
akt01feedback@gmail.com
/ grandakt
kzfaq.info/love/zmwQl35...
open.spotify.com/artist/3s8RV...
/ proakt

Пікірлер: 249

@stringfellowbalk2654 3 жыл бұрын

Keeps cafe racer in the living room. You are a man among men.

@RACER_TV 3 жыл бұрын

Lol. Thank you my friend for sharing your perspective. :) Cheers.

@DARIVSARCHITECTVS 2 жыл бұрын

This is not just a motorcycle, it's a labor of love and a work of art.

@albertoschmid6795 3 жыл бұрын

Beautiful job, this motorcycle is the best, in my opinion engine and cyclist are the main points of the strong success since it was made....🇧🇷🇧🇷🇧🇷🇧🇷

@RACER_TV 3 жыл бұрын

Thank you my friend for sharing your opinion. :) Cheers.

@albertoschmid6795 3 жыл бұрын

@@RACER_TV thank you!!!🇧🇷✌🏻

@peterford9369 3 жыл бұрын

Everytime I see any CB 750 builds, makes me wish I'd never had sold my '75 CB. Such is life.

@mrkang4080 2 жыл бұрын

Cheap to buy, get a new one :-)

@Scorpionreturned Жыл бұрын

if you are waiting for a sign to go and buy a new one this is the sign

@peterford9369 Жыл бұрын

@@Scorpionreturned 🥲. Yeah thanks. That was a long time ago. I've upgraded to a 2005 triumph Bonneville T 100. Still old, but looks new and is all I need. New is nice but after a year, its not new any more anyway. But thanks for the advice 👍.

@hitman9414 Жыл бұрын

Oh yes ! It's captivating, Supremely elegant.

@FauR3 2 жыл бұрын

There is something poetic about motorcycles and cars. It's been a while since I want to learn to drive a bike and cafe racers caught my attention. I am not a mechanic, but I would love to design one on my own and make it built. Nice videos! I've even been listening to them to improve my English listening skills. Salvadorean here.

@georgemcmillan9172 3 жыл бұрын

Obviously, this has been a labor of love build. The result is a perfect example of a Cafe` racer. Stripped down, light wieght, simple and fast. A beuatiful and elegant machine, with many hidden and well thought out details, like the seat latch and master cylinder. Perfect dimension, nothing over stated, and a beautiful machine...

@ps3shakes123 3 жыл бұрын

The brake feature is called a "remote reservoir". My '78 r100rs had it. It puts the reservoir on the frame under the gas tank, and makes the handlebar look less cluttered.

@RACER_TV 3 жыл бұрын

Thank you. I'm glad you liked my friend. :) Cheers.

@RACER_TV 3 жыл бұрын

Indeed. Some BMW R series had this feature in the past. I didn't know that sytem was known by ""remote reservoir". Thank you for sharing it. :) Cheers.

@paulheath6882 3 жыл бұрын

@@ps3shakes123 thanks for the detail on this. I would like to include it on one of my builds, but we having trouble finding it. Much appreciated!!

@lylemacdonald6672 3 жыл бұрын

Honda CB fours from that era just make great cafe platforms! I drooled over these 750s when they first arrived in my town in 1968/69. I still would like a clean original up to about the mid 80's.

@RACER_TV 3 жыл бұрын

Thank you my friend for sharing your personal perspective about those days. That is why their value as a classic motorcycle is higher and higher. :) Cheers.

@WillysPerformanceCycleCtr 3 жыл бұрын

This is a very beautiful example of a CB750 Café racer. Your analysis is certainly correct. The details are so subtle, they are almost hidden, yet, define this machine. As always, thank you for Racer TV, the Café racers only choice! Ride safe my friend.

@RACER_TV 3 жыл бұрын

Thank you my friend for sharing your opinion. I am glad you agree with my point of view. You too. :) Cheers.

@rickfilho3686 2 жыл бұрын

That is the # 2 for 2022.

@RACER_TV 2 жыл бұрын

I am not so sure about this one. :)

@DrewMonge 3 жыл бұрын

Goals. Roomy living room with hardwood floors, so I can park my café racers inside.

@RACER_TV 3 жыл бұрын

Lol. But only if you are not married. :) Cheers.

@DrewMonge 3 жыл бұрын

@@RACER_TVIf my wife insists on having the dog and cats inside the house, I will insist on having my motos inside the house. 😅👌

@stringfellowbalk2654 3 жыл бұрын

Motorcycle stays. Woman go.

@RACER_TV 3 жыл бұрын

Looooooooool.

@blacksheep6888 3 жыл бұрын

I keep my Kawasaki W800 Cafe in the lounge room, I did have 4 other motorcycle's in the lounge room as well, but it was a bit crowded so now 4 live out in an enclosed verandah behind a sliding door so I can still see my baby's.

@blacksheep6888 3 жыл бұрын

A truly great Cafe racer with a real story behind it.

@RACER_TV 3 жыл бұрын

Thank you. I'm glad you liked my friend. :) Cheers.

@alejmonzon 3 жыл бұрын

The Honda CB 750 is a motorcycle that has been used and abused in almost any direction of design or lack thereof. It is in the construction of the engine a cult object. Everything has been said and almost everything has been seen. But always, in a legendary motorcycle there is something that arises from the most diverse places. It is the case of this project that, in its apparent simplicity and repetition of old cliches, revolutionizes them to the point of not being one more of the bunch, but perhaps the only one of a herd of repetitions that is worth looking at carefully, precisely because it is something. original that stands out from the rest.

@RACER_TV 3 жыл бұрын

My dear friend, you said it all. I couldn't said better myself. Thank you Alejandro for sharing your perspective. :) Abrazo.

@tripsmytrigger7090 3 жыл бұрын

Simple, clean ... kept in living room ... perfect!

@RACER_TV 3 жыл бұрын

Thank you. I'm glad you liked my friend. :) Cheers.

@xtremluck6260 3 жыл бұрын

WOW! Nine years to build a Cafe Racer. This must be some kind of record for the longest build ever. Granted, the bike does look awesome, except for the digital speedo. I see a lot of kudos for Andy's determination in completing his bike, however, I wounder if any of those praising him would commission Andy in building them a Cafe Racer. Imagine 3 years later Andy's status report to you would be, "We're 1/3 done now with the build. Just finished disassembling your bike. We'll start cutting and welding the changes we talked about 3 years ago".

@RACER_TV 3 жыл бұрын

Looool. Yes, you are right. 9 years is a long time. That is probably why this honda Looks so good. I remember when I started my own Honda CX project. It took me 2 years to create the design, and 9 months to build it. But that is also a good way of making things correctly. Thank you my friend for sharing your perspective. :) Cheers.

@meister-megerle 3 жыл бұрын

It was a side project, build several other mainly car projects in the meantime. In this bike build went around 1500h of work you see it when you look closer, look at the pipes running from the oil tank, those are weldet bents smoothed out to look like one pice, or did you noticed the rear blinkers, and how they are mounted?

@amarco5057 3 жыл бұрын

Very nice analysis, beautiful story, awesome music... Another stunning project and another stunning video. Thank you gents!

@RACER_TV 3 жыл бұрын

Thank you my friend for your kind comment. :) Cheers.

@carlocarlsson8794 3 жыл бұрын

Masterpice Well done

@RACER_TV 3 жыл бұрын

Thank you. I'm glad you liked my friend. :) Cheers.

@Reverendos 3 жыл бұрын

What a beautiful story. What an amazing job. Congratulations Andy Megerle. The effort has been worth it. Thank you very much Vito for another wonderful video.

@RACER_TV 3 жыл бұрын

As usual, thank you my friend Reverendus for your kind comment. :) Cheers.

@josepereiraribeiro6710 3 жыл бұрын

Absolutamente magnífica! A "simplicidade" que parece aparentar é verdadeiramente compensada pela riqueza dos detalhes e peças construídas pelo artesão . Obrigado por nós trazer essas preciosidades. Saúde e sucesso

@RACER_TV 3 жыл бұрын

Obrigado amigo. Fico contente que tenha gostado. :) Um abraço.

@oilinmyblood3906 3 жыл бұрын

Thank you so much brother for your video on the CB750, and I absolutely agree! That custom oil tank has to be the best-looking I have seen by far! The CB750 is one of my absolute favorite bikes on the planet! I still own three myself and I'm trying to hold on to all of them for as long as I can, I still have not forgot about your XS650 build and I am waiting patiently for you to continue that project and of course cannot wait to see what you do! Take care out there in Portugal my brother! ✌ my friend! from Anaheim California.

@RACER_TV 3 жыл бұрын

Thank you Anaheim for sharing your opinion. I see you are a faithful follower of my videos. Unfortunately, I still don't have news from my XS project. Thank you my friend for your support. :) Cheers.

@tphvictims5101 2 жыл бұрын

Absolutely beautiful. I’m going on 70 and back in the day they were terrors 👍🏻

@aftercustons 3 жыл бұрын

Que vídeo top (fixe), parabéns novamente, por nos proporcionar mais essa máquina espetacular.

@RACER_TV 3 жыл бұрын

Muito Obrigado amigo pelo simpático comentário. :) Um abraço.

@rsbharley4766 3 жыл бұрын

Great video Racer. Excellent build from Andy with an amazing story. Job well done, ride safe mate. Cheers

@RACER_TV 3 жыл бұрын

As usually, thank you my friend for sharing your opinion. I am glad you liked. You too. :) Cheers.

@DroogMoto 3 жыл бұрын

Fantastic video and great looking machines. Thanks for sharing! 🙌

@CDTSISON 3 жыл бұрын

It looks beautiful I just wish he used a classic speedometer

@RACER_TV 3 жыл бұрын

Thank you my friend for sharing your perspective. :) Cheers.

@f7serrano17 2 жыл бұрын

Absolutely beautiful and perfect!!!

@uroshavalon 3 жыл бұрын

Fifth person I know with a motorbike in a living room. Thank you for the video Victor. Muito obrigado.

@RACER_TV 3 жыл бұрын

Loool. By the way, from all those persons with a motorcycle in the living room, I bet none of them is married. lool. De nada. Um abraço. :)

@hazlal 3 жыл бұрын

I don't know if I love the bikes better or your style of describing. I feel your video are like a piece of Art inside of an other piece of Art. My regards from Morocco

@RACER_TV 3 жыл бұрын

Lool. Thank you my friend for your kind words. I appreciate your support. :) Cheers.

3 жыл бұрын

😍 *_velocity stacks induction noises_* 😍

@davyboycolon530 3 жыл бұрын

Another work of art

@n6rcan 3 жыл бұрын

So inspiring

@RACER_TV 3 жыл бұрын

Thank you. I'm glad you liked my friend. :) Cheers.

@johnkraemer5505 3 жыл бұрын

Beautiful workmanship! I love it!

@RACER_TV 3 жыл бұрын

Thank you. I'm glad you liked my friend. :) Cheers.

@marcelflo2765 3 жыл бұрын

Beautiful looking cafe racer, love it!👍

@RACER_TV 3 жыл бұрын

Thank you. I'm glad you liked my friend. :) Cheers.

@wellstone1897 3 жыл бұрын

Another inspiring video for cafe racer lovers. And as usual, I got a few ideas I will probably use one day in the future... those tires are damn hot. Obrigado!

@RACER_TV 3 жыл бұрын

:)De nada. Thank you. I'm glad you liked my friend. :) Cheers.

@martinlegrice1414 3 жыл бұрын

Great sound!

@davidsatv3096 3 жыл бұрын

That is really a piece of art !

@rreisproenca 3 жыл бұрын

Perfeito...parabens...

@eskanderx1027 3 жыл бұрын

That's what I would've done... Perfect.

@RACER_TV 3 жыл бұрын

Thank you my friend for sharing your opinion. :) Cheers.

@nicholasjon9825 3 жыл бұрын

Thank you very much for another great video.

@RACER_TV 3 жыл бұрын

You are welcome my friend. My pleasure. Cheers.

@MrSplattman 3 жыл бұрын

Sweet ride!

@paulheath6882 3 жыл бұрын

Fabulous outcome from the combination of great design skills and excellent fabrication/build skills applied to one of the best ever raw materials for such a project. I can't wait to build my CB750 Cafe Racer. In fact, I'm heading to the garage right now!

@RACER_TV 3 жыл бұрын

Thank you. I'm glad you liked my friend. Good luck for your project. :) Cheers.

@paulheath6882 3 жыл бұрын

@@RACER_TV As I posted on another thread in response to another viewers comments on one of your videos in this channel: you have taught many of us the key elements of building beautiful cafe racers, which are not only excellent examples of engineering and awesome motorcycles but also amazing works of art - capable of being displayed in a lounge room, or an art gallery! You have informed us on the Divine Ratio and why a minimalist design is key in creating a purist design.. While I am sure you have inspired thousands of owners to build their own custom cafe racer, I was already committed (2008 Thruxton) which is how I found your channel. But you showed us Sacha Lakic's CX500 (plus many others) and a range of CB750s, which compelled me to find original examples of both these bikes and plan two more builds (I always loved CB750s, since I was a kid). You also brought the DGR to my attention, which I now attend each year. To make matters even worse, you recently posted a video on an excellent CB1100 build and 'Whitehouse' in Japan which provides parts to replicate the 1970s K series CB750 look on the CB1100. Now I have to find a CB1100 as the end result of that conversion is just too good to not have one. So, from all of us who appreciate your channel, thank you!

@RACER_TV 3 жыл бұрын

@Paul Heath Wow. I am impressed. I see that you are loyal follower of this Channel. And you are also very good listener. You said some things that correspond to some of my goals on most videos. Thank you for all your support. I am very glad for knowing that my videos are being very useful. :) Thank you. Cheers.

@rognvaldjaegerdandy4340 3 жыл бұрын

Never before this video today have I seen hardwood floors in a garage. Weird, but cool-looking.

@RACER_TV 3 жыл бұрын

Good point. To be honest, I think that is not real wood. It seems to be a vinyl covering imitating wood. :) Cheers.

@ralfuhlmann8341 3 жыл бұрын

@@RACER_TV it is real :)

@mikestewart7322 3 жыл бұрын

Very nice indeed. I would keep it in my lounge as well. The guy has a very cool pad. 👍🏻😎😎✊️

@oshadaattanayake7313 2 жыл бұрын

Your voice is so satisfying .

@alexdacosta6130 3 жыл бұрын

Realmente um trabalho ardo, mas gratificante

@ediris 3 жыл бұрын

Olá Meu Amigo. Mais uma joia pra coleção. incrível como um projeto "simples" pode conter tantos detalhes importantes que a primeira vista passam despercebidos. Suas observações foram mais uma vez fundamentais para apreciar essa obra de arte. Por sinal (retomando uma conversa antiga): Não imaginei você trabalhando na indústria fazendo projetos comerciais mas sim projetando essas joias que vemos nas oficinas e estúdios que aparecem aqui. Abraços e Thank you fot the Race Tv

@RACER_TV 3 жыл бұрын

Obrigado amigo pelo simpático comentário. Em relação à sua sugestão que esclareceu agora, para ser sincero, já tinha pensado em algo do género. O problema é que para que um projecto Cafe Racer funcione bem, tem que ser acompanhado pessoalmente, de forma a corrigir ou até melhorar os detalhes. Digo isto pela experiência que tive com a minha Honda CX. Tive que alterar muitas coisas ao longo da construção da moto. Mas obrigado pela sugestão.:) Um abraço.

@bjohnson2219 2 жыл бұрын

Character In the video It's great, I like it a lot $$

@clutchrider5009 3 жыл бұрын

yeah very beautiful that cafe racer,.

@aGentleUser 3 жыл бұрын

Take my NC, THAT would be a challenge to customize :D Very sophisticated work! ...and as always looking forward to your next video!

@RACER_TV 3 жыл бұрын

Lol. Nothing is impossible. Even a Honda NC can be transformed in a Cafe Racer. The problem is the amount of money and work labour that it will require. Thank you my friend for sharing your opinion. :) Cheers.

@1frogass1 3 жыл бұрын

Legos are bad enough , I couldn't imagine stepping on that bottle cap in the middle of the night !!!

@akarimomo9219 Жыл бұрын

Spledid work,kudos to Andy🙌 I'm genuinely interested on getting one🤔

@rallyzamora8356 3 жыл бұрын

Beautiful work

@RACER_TV 3 жыл бұрын

Thank you. I'm glad you liked my friend. :) Cheers.

@stephenallen3683 3 жыл бұрын

Nice 👌

@michal.mrozek 3 жыл бұрын

Great project. Kind regards from Poland.

@RACER_TV 3 жыл бұрын

Thank you my friend for sharing your opinion. :) Cheers.

@rockcjr8917 2 жыл бұрын

Projeto lindo 👍👍👍

@RACER_TV 2 жыл бұрын

Obrigado 👍

@ralfuhlmann8341 3 жыл бұрын

This thing looks even better in person ❤️

@RACER_TV 3 жыл бұрын

So, you mean you already saw it in person. Lucky guy. :) Thank you my friend for sharing your personal perspective. :) Cheers.

@rogerthat10-47 3 жыл бұрын

Another Beautiful bike this has similar lines to the ones I build, but I don't spend an entire week building an oil tank. I don't think the "Inline 4" gets the attention it deserves, they can turn out really good as this one shows, I've built 1 or 2 with open casings but that front brake set up & especially those wheels rims ad that little extra something. I've just built a fuel tank with "Dents" in it, I cut off both sides & swapped them around, the customer wanted the name "Hammering" into it so I filled it with lead & battered it with a hammer & it turned out surprisingly well, unfortunately, most of my builds are on a tight budget so no "Fancy" clocks, but I do have a number of "Unfinished" bikes out there, they come back to me "Time to time" to get things done that were not in the original build & of course my own bikes are always in a "State of Flux", speaking of "Unfinished" how's your "XS" coming along? PS I buy most of my bikes in the condition this one came in, it's a great way to get a "Seriously Expensive" bike for cheap money.

@RACER_TV 3 жыл бұрын

Thank you my friend for sharing your perspective. I still don't have news about the XS Project. The only change until now, is my disappointment with the mechanic(Leonel). I am already thinking of finding a different mechanic to build my XS. It is sad, but that is what it is. Cheers.

@rogerthat10-47 3 жыл бұрын

@@RACER_TV I am genuinely sorry to hear that I know how much of a fan of his work you are, but having a different builder can be a bonus, new eyes & ears a new perspective for the bike & the parts it's built from, I know a guy if you can't think of anyone(haha), you have showcased a few from your part of the world that I'm sure would love to build it for you, but have you thought of a "Self-build"?? It's a lot of work, but it's a hell of a lot of satisfaction when it's done & you don't have to do all the work yourself. I've just finished one for a young lady, no chrome buy Copper with Fire Engine red paint, it's my first real paint job & it looks pretty f#ckin good if I do say so myself. I hope you get sorted my friend, be safe.

@donniebaker5984 2 жыл бұрын

I'm impressed with the ignition points cover that is stock and well vented and if you noticed the holes appear to have probably do rolled edges as that points cover is very thin metal with a light coating of chrome on it and he has several holes around the front one big one in the center with something like a cap or something on it and then there are smaller holes around the beveled perimeter of the outer edge that took a hot minute or two probably spent as long on that ignition points cover he did on the oil tank.

@kevinkamaumuchai 3 жыл бұрын

Simple is beautiful

@jrferreira3 3 жыл бұрын

Linda. Acho que é justo dizer isso dessa moto. Aqui tenho observado motos maravilhosas. Está é uma delas. Adoro as motos café. Sua posição de pilotar é a que mais me agrada. Sua linha e desenho é o que me enche os olhos. 👍 "Gosto" dessa moto e só. ZéRo Kralento Nova Iguaçu RJ Brasil 👏

@RACER_TV 3 жыл бұрын

Obrigado amigo pelo simpático comentário. :) Um abraço.

@Thewatson77 3 жыл бұрын

Pretty sharp bike indeed 👌🏼

@raumiosveri9598 3 жыл бұрын

Excelente reportaje! Gracias por poner subtitulos en portugués

@RACER_TV 3 жыл бұрын

De nada. Los subtitulos No son en Español, pero creo que ayuda un poco a los que hablan Español. :) Saludos.

@stooltayartyrebangku9418 2 жыл бұрын

Happy owner

@tiagocardoso1470 2 жыл бұрын

Tenho estado a desenhar um projecto semelhante para a minha hornet 250, e este vídeo deixou várias ideias , obrigado!!, Mais uma vez adoro o canal

@RACER_TV 2 жыл бұрын

Obrigado amigo pelo simpático comentário. :) Um abraço.

@cadimol 3 жыл бұрын

Muito linda!!!

@gerardomartinez8000 3 жыл бұрын

Perfecto machine 😯😯

@droneviewssrilanka4409 3 жыл бұрын

Wow..your words...❤️❤️❤️

@romeurodrigues6471 3 жыл бұрын

Muito bom

@jackshepherd9843 3 жыл бұрын

Great story. Great bike. Some of the previous episodes/designs were a little far out (for me personally). This one is like “coming back home.” :)

@RACER_TV 3 жыл бұрын

Thank you. I'm glad you liked my friend. :) Cheers.

@ouimetco 2 жыл бұрын

Really nice art work. I’m on the other with cb1100f

@ahmadraihan906 3 жыл бұрын

I think u need to review more about 2 stroke engine build, there is not so many reference. Nice contents man!

@RACER_TV 3 жыл бұрын

Very soon, there will be a 2 stroke machine on Racer TV. :) Cheers.

@Miguel_Fortuna 3 жыл бұрын

Looks perfect 👌 less is more

@RACER_TV 3 жыл бұрын

Indeed. Thank you my friend for sharing your perspective. :) Cheers.

@olm89 3 жыл бұрын

So cool to see our German Andi.I know him from the youtube channel "Levella GmbH" who he make the bodyworks on Cars from the owner of Levella.Must see this Channel,when you also like 90s Cars,like Mercedes BMW VW Audi.

@RACER_TV 3 жыл бұрын

Thank you. I'm glad you liked my friend. And thank you for sharing that channel :) Cheers.

@dalahinpilipinas2038 2 жыл бұрын

Vote this one!

@RACER_TV 2 жыл бұрын

Thank you my friend for sharing your opinion. :) Cheers.

@georgskt 3 жыл бұрын

3:09 wooooooooooooooooOO

@Daltrogil 3 жыл бұрын

100° Comentário. Ganhei!. 😁👍

@RACER_TV 3 жыл бұрын

Obrigado amigo. Fico contente que tenha gostado. :) Um abraço.

@ethan073 2 жыл бұрын

2:18 🔥 🔥 🔥

@kungfusing1 2 жыл бұрын

The tail light is so much nicer than the thin LEDs

@RACER_TV 2 жыл бұрын

Thank you my friend for sharing your opinion. :) Cheers.

@supersteve3299 2 жыл бұрын

Thank you

@RACER_TV 2 жыл бұрын

You are welcome my friend. My pleasure. Cheers.

@HugoMNF 3 жыл бұрын

Linda

@ALEXANDERCRETA1 2 жыл бұрын

Except few motorcycles that have the charisma that you can make everything you imagine and few of those bike's is honda cbs yamaha xs etc

@RACER_TV 2 жыл бұрын

Thank you my friend for sharing your perspective. :) Cheers.

@Translitero 3 жыл бұрын

Bom diaaaa!! Que maravilhoso estudo de caso. Poderia ser uma série, com as soluções nas modificações que geram segurança, conforto e estética, como a questão dos aros de roda... Que são iguais os meus, kkk! Entre outras coisas como os espelhos retrovisores, funcionalidade e segurança, os meus, de ponta de guidão, são para cima, pois para baixo não tem boa visibilidade! E por aí vai! Abraços, continue e se cuide!

@RACER_TV 3 жыл бұрын

Olá Amigo Alex. Obrigado pela sugestão. Curiosamente, já tinha pensado em algo semelhante para um video. Mas com o tempo, apercebi-me que cada modelo de moto/projecto, tem a sua própria solução, e não dá para generalizar. Mas obrigado pela dica. :) Um abraço.

@sigma_kappa 3 жыл бұрын

Andy's uncle was a smart man

@jasongaretthatcher Жыл бұрын

Looks nice but, the front fender had a structural purpose. It’s bracket provides rigidity when the fork wants to flex in a turn.

@felipesilvadamasceno373 3 жыл бұрын

Pena q aqui no Brasil seja tão dificil encontrar motos dessa geração com um minimo de qualidade para fazer uma "real café racer" o que podemos aqui é fazer o melhor com o que temos... O importante é nunca deistir se é o que realmente queremos!

@RACER_TV 3 жыл бұрын

Pois é amigo. Eu sei que aí é complicado. Mas pelo menos a abordagem neste projecto com a CB 750, pode perfeitamente ser aplicada numa moto bem mais pequena. Até mesmo numa Honda CG 125. :) Um abraço.

@aftercustons 3 жыл бұрын

Por isso gosto desse canal, o tuga nos entende, sabe da nossa realidade, isso que é canal.

@RACER_TV 3 жыл бұрын

@Luís Gustavo Teider Obrigado Amigo. Na realidade fui aprendendo com Vocês(Brasileiros), e com os comentários que Vocês deixam aqui no canal. :) Um abraço.

@huynhminhvu8690 Жыл бұрын

💯

@TheWolfsnack 3 жыл бұрын

Pretty cool....I like the progression from barely running bike to ugly duckling daily rider....I have done the same with old Harleys, building custom bikes on a low budget, over a two or three year period....then the new paint and wheels and complete transformation to a thing of beauty;.

@RACER_TV 3 жыл бұрын

I am glad you agree. Thank you my friend for sharing your personal perspective. :) Cheers.

@The9meister 2 жыл бұрын

Andy is a bachelor

@markblundell9461 3 жыл бұрын

The origins of the cafe racer, come from taking a chassis that handles well and installing a motor that performs well , and styling it so you create less drag as you blast down the road. The original cafe racer was and still is the TRITON. Are there any other Triton owners out there other than me.?

@RACER_TV 3 жыл бұрын

From many other comments I read on this channel, it seems that not all guys who had cafe racer bikes in the 60s have the same perspective as you. What you described, seems to be on the top level of transformations of those days. But from what someone already told me, the big majority of those cafe racers of the 60's, were very simple, with only some small changes on the handlebars. But Thank you for sharing your perspective. :) Cheers.

@cantosoares 3 жыл бұрын

Linda moto. O som do motor e do escapamento ficaram ótimos. Mas a dificuldade de ligar a moto, PROVAVELMENTE deve ser por causa do cabeçote. Aquela fumaca branca que sai quando ele acelera deve ser os retentores de válvula que estão deixando o óleo do cabeçote passar para a câmara de combustão. Se ele resolver isso E com os carburadores bem regulados, a moto vai ligar mais facilmente. Mas no geral esta LINDA. Abraço.

@RACER_TV 3 жыл бұрын

Obrigado amigo. Fico contente que tenha gostado. Na realidade eram vários problemas. As bóias dos carburadores mal reguladas, e parece que o motor não estava a carregar a bateria. considerando que o motor foi totalmente revisto com pistões juntas e vedantes novos, é provável que o fumo se deva a uma deficiente mistura de Ar /gasolina. Mas obrigado pelas dicas :) Um abraço.

@ravichandel8690 3 жыл бұрын

make a video on first cafe race who build it and why when how

@queenslander954 3 жыл бұрын

Should try riding them

@SSCS26 3 жыл бұрын

Gosto de uma parte que não foi referida no vídeo, a embraiagem a seco! Vai se lá saber porque é que eu gosto disso.

@RACER_TV 3 жыл бұрын

Pois. Normalmente as embraiagems hidráulicas só funcionam bem se forem fabricadas no Japão. Loool. Abraço.

@amitarya07 2 жыл бұрын

Beautiful story but in India you will find the similar kind of motor cycle (royal Enfield) modified by local modifiers..ans they are really good

@MidniteSan 3 жыл бұрын

👍

@mewtwo.150 3 жыл бұрын

A question The inverted suspension My bike has it, which is awesome of course, but for my paint project not so much. It has this bright golden color, I've seen other inverted suspension with a more discreet golden tone, less bright we can say. My question is, can it be painted? Or is necessary to buy another one with the right color?

@RACER_TV 3 жыл бұрын

Hi. golden color is a very hard color to get it right with a paint job. Most factory original golden inverted suspensions, are made with a special chemical treatment(I don't remember the name of the process). Therefore, I think is it is better to buy an original inverted suspension, with the gold tone you most like. Good luck. Cheers.

@mewtwo.150 3 жыл бұрын

@@RACER_TV Thanks, I'll follow your advice By the way, wanted to asked, I'm sorta new on your channel, and I'm starting to love the music on the background of your videos, but... is it made by yourself? Cuz I can't find it!! And is awesome, specially from this video of yours: kzfaq.info/get/bejne/abCKl8SLmtuRcnk.html

@RACER_TV 3 жыл бұрын

Thank you my friend for your support. Here is the original song that i changed for the video: kzfaq.info/get/bejne/mNFofpVkyq7Ie6s.html Cheers.

@axel3895 3 жыл бұрын

I'm planning to convert my old cbr250r into a cafe racer. The bike originally weights around 160kg. I'm aiming to reduce weight by 10 to 15 kilos and give it a better suspension setup. Wish me luck.

@RACER_TV 3 жыл бұрын

To be honest, I think the cbr250r is still too modern for a cafe racer project. Why don't You sell it, and try it with an older motorcycle? Cheers.

@axel3895 3 жыл бұрын

@@RACER_TV Well there are not a lot of old cb's or any other retro sort of motorcycle for sale in my country. I have this bike for over 10 years and have quite a lot of memories with it. Thankyou for your opinion though.

@patrick_rosa 3 жыл бұрын

Why is your text aways this wonderful? 👏🏻👏🏻👏🏻👏🏻👏🏻👏🏻👏🏻👏🏻👏🏻👏🏻👏🏻👏🏻👏🏻

@RACER_TV 3 жыл бұрын

Lool. To be honest, I always tried to develop my scripts over the years. The essence is to be true, using simple words, and make the right pauses between sentences. These pauses give more meaning to words. Unfortunately, this is something that is becaming very rare on these days. Most youtubers speak too much words, and extremely fast. And this destroys the value of each word/sentence. :) Cheers.

@patrick_rosa 3 жыл бұрын

@@RACER_TV True! Congratulations... Please keep giving us this fantastic material!