Radiant Half Bridge Circuit, For Longitudinal Waves

Рет қаралды 18,066

Күн бұрын

The Radiant Half-Bridge Circuit is presented, explained into great detail, and shown working. It shows the impulse electricity, that Nikola Tesla used.
LMD resonance and TEM resonance are shown along side with phase shift anomalies.
******************************************************************************************
update July 4 2021: This circuit has a flaw, it does not work as intended,
See this video for explanation of the modification:
• Radiant Half Bridge Ci...
******************************************************************************************
For ordering the new V6.2 isolated gate driver MOSFET switch PCB:
magstar.eu/mosfet/
Donations to fund my research are appreciated, click here:
PayPal.Me/masterivo
Time stamps (click to jump to that part):
0:00 introduction
0:55 Topic list
1:12 Recap of 2019 Radiant power circuit
3:02 The new radiant Circuit
3:40 Basic Schematic (for more details, see links in description)
5:58 Switching the mosfets
7:26 Symmetrical power supply
8:24 The MOSFETS (C3M0065090D)
8:41 The Diodes (MUR8100E)
10:05 Isolated gate drivers
12:49 Experiment setup
16:24 Experiment 1: current amplification
24:44 Amplification explained
31:22 Experiment 2: TEM and LMD resonance + anomaly
35:40 TEM resonance
37:42 LMD resonance
41:06 Conclusion
43:25 Almost forgot
44:03 TEM lamp burning
45:51 LMD lamp burning attempt
47:54 Open source research
48:19 Epilogue
I mention the MUR8100E diode, but only the MUR8100EG is available. it has the same functionality.
Link to my website with more information (under construction, best looked from PC)
www.Magstar.eu
Several PDF's including Nikola Tesla's april 6 1897 important Lecture:
magstar.eu/pdfs/
dual channel square wave generator :
Cleqee JDS6600-60M
a.aliexpress.com/_BO92qb
Instagram:
/ master.ivo

Пікірлер: 155

@MasterIvo 3 жыл бұрын

update July 4 2021: This circuit has a flaw, it does not work as intended, See this video for explanation: kzfaq.info/get/bejne/mNJkq85pqLPJaH0.html Don't forget to look in the video description. there is a time stamp list and I provide several links, with more detailed information about the circuit.

@Greg_Chase Жыл бұрын

Around time 22:30 when you present the fact that the L1 magnetic field collapse creates the brief voltage spike pulse into L2 - and you point out that this brief pulse into L2 creates a steeper current growth in L2 - the reason could lie with the fact that capacitors block DC but pass high frequencies so the capacitor connected in series-resonance with L2 is just allowing that spike from L1 to pass right through it. This occurs because the driving frequency is no longer the frequency of the series-resonant L2 + capacitor. That is just my guess at looking at your discussion around time 22:30. If the driving frequency was still the resonant frequency of L2 + capacitor, the pulse would be utilized by that series-resonant path instead of just blowing right through the capacitor.

@stevewilson8267 3 жыл бұрын

Oh Goodness Ivo! I am very impressed! I will try to duplicate this work. I must mention, you are a valuable resource.

@jvon3885 3 жыл бұрын

Absolutely

@MasterIvo 3 жыл бұрын

Thanks. Please do!

@LstfxLstfx 3 жыл бұрын

Excellent work! Well done Ivo!

@MasterIvo 3 жыл бұрын

Thank you! Cheers!

@michelgrenier1568 3 жыл бұрын

I explained many times on forums, energy source is the earth magnetic field, this field is steady, compass prove this. Now displace the field and it will bounce back, like back emf people called. Now resonant circuits is widely used in fluorescent ballast and ccfl ones. The tube act as a discharge capacitor tuned to the half bridge circuit. In radio transmitter, the antenna is the capacitor and displace directly the earth magnetic field propagating what we call radio waves. This concept must be understood by all for understanding what happens. Now we cannot push power and take it at same time, the trick is only this, then for a resonnant circuit, we charge the capacitor and it discharge into his coil, trick is to discharge the capacitor when he reach his full voltage and power the load, charge and discharge cycle, give take exchange in balance as Walter Russell explained. Also power can be extracted by differential output coil, this mean half is CW and other is CCW, source in the middle. One side is grounded and other side is connected to a capacitor the primary can be moved to tune the system to get the best COP. The other concept is to use harmonics: with a square wave input like 1khz a resonnant coil/cap will work at 3 times the frequency input, this mean it will resonate a 3khz and 5khz and 7khz and 9khz etc. Tesla understand this simple fact like music and frequecies symphony, this where all the power can be extracted, between phase shift and also with harmonics. I hope I inspire here some people's with my explanation.

@michelgrenier1568 3 жыл бұрын

Also remember a magnet or an electromagnet don't create a magnetic field, it only concentrate the actual field, this is basic fact. Do a air blower or a vacuum cleaner create air ? No it only displace or concentrate the actual air, magnetic field is exactly same, this is why radio wave propagate as growing a stone in a pool, the actual field is here and steady, we only move it and with coils relationship we extract energy called electricity, Donald Smith was wright about this !

@MasterIvo 3 жыл бұрын

I like your concept, of energy being in the field. As I explained in my Faraday tubes video, Mass, or better said Inertia, is a attribute of the AEther.

@Teslaundmehr 3 жыл бұрын

Hey my friend, i'm really impressed by your work and the video! I think it was a lot of work. Thank you for the valuable knowledge, I'm looking forward to more videos from you ;)

@MasterIvo 3 жыл бұрын

thanks neighbor, yes I took a lot if work. and you can know. Maybe you could build a Real Tesla coil, with an impulsed primary?

@MS-ef1gy 3 жыл бұрын

Looking forward to seeing your bridge circuit as applied to the ongoing LMD/TED energy/power experimentation. Well organized and delivered presentation!

@MasterIvo 3 жыл бұрын

thanks!

@tetraederzufrequenz7896 3 жыл бұрын

Hello Ivo. That was an interesting research. A lot of applications can be used. Thank you for sharing!

@MasterIvo 3 жыл бұрын

My pleasure!

@brandonfranklin4533 3 жыл бұрын

I love this work, its so inspiring! Can’t wait to see more, and I’ll definitely be visiting the website for those schematics.

@MasterIvo 3 жыл бұрын

Thanks!

@tiffanyhouze1886 Жыл бұрын

Run about 60 pulses which is our principle for alternating current 50 to 60 oscillations. Or match whatever ratio if amperage however your trying to configure. I have some ideas too. I've been reading electric circuits principals and applications. Great book on circuitry. Nice works😊

@ZincFold 9 ай бұрын

Brilliant! Thank you for sharing. Subscribed!

@niktesla3939 3 жыл бұрын

LMD analogue (Tesla Transformer Coil) amplifier is for speaker microphone tranciever feedback loop. Connected coil to magnets (interacting.) Self oscillating tranciever coil.

@kurbanovmurad2738 3 жыл бұрын

Don't forget brother, getting reactive power is only the first step. It is necessary to reconcile the current and voltage in the load in phase. for this a high voltage must be used. That is, first dissolve the current and voltage, and then bring them together in the load using high voltage. If interested, write.

@MasterIvo 3 жыл бұрын

already have that. no high voltage needed

@kurbanovmurad2738 3 жыл бұрын

@@MasterIvo I'm surprised I can't get free energy without high tension. How did you do this? Show me please!

@zeljkolukac4170 Жыл бұрын

@@kurbanovmurad2738 I agree. Non linear dependencies voltage and current are critial. Doubling both gives 16 times increase. Good starting point.

@MasterIvo Жыл бұрын

I already showed resonant voltage and current being IN phase in the extra coil (L4). I do agree high voltage is needed. but how high is relative to capacity (plate area and plate distance). I'm currently working using current impulses from capacitor diacbarges (using parallel mosfets). based on the insight we need single direction displacement current into the coils (implosion)

@upmperthay Жыл бұрын

You're definitely catching up with Tesla! Thanks ALLOT!! & please keep going!!! 🙂

@Buzzhumma 3 жыл бұрын

I really was looking forward to this latest installment and you really have delivered some great content. Very interesting with behavior of L2 tuning capacitor etc. Well explained Master Ivo! I have watched a few times now and i feel i have a good grasp of what you are saying. Maybe a few more illustrations like with the paper covering parts of the circuit would have helped as its very detailed in its nature.Great Work Man!

@MasterIvo 3 жыл бұрын

thanks!

@poopabaloo1249 3 жыл бұрын

Very nice! Thank you!

@Buzzhumma 3 жыл бұрын

In respect to the current amplification it sounds like a similar concept of the Marx generator and Cockroft Walton voltage multiplier circuit Hybrid accept with current increasing instead of voltage.

@tribulationcoming 3 жыл бұрын

Do many understand Nikola Tesla's most important discovery of the 1890's. The radiant particle, the aether in action. Master Ivo, your presentations are excellent, I understand the principles but as a blind monkey, I grope for a banana, finding only the pealing. I enjoy just looking for one in a qualitative manner.

@pierrecotnoir5186 3 жыл бұрын

I forgot to mention that you do a great job and I believe like you that there is a lot of potential in reusing the feedback and it is the key to some bigger things

@MasterIvo 3 жыл бұрын

thanks, yes I feel that is the key

@hambekgueftham1352 4 ай бұрын

Thanks so much 🎉, God bless u,

@harrymetsker420 3 жыл бұрын

Hello Ivo I enjoyed the style and the time taken to explain your working concepts, also how you interact with your followers in progressive thoughts. Yes I read all the comments. Today we work with premanufactured items to create a device from a concept. Concepts inspired by historical great people like Tesla and others also ourselves of today. Yet Tesla created the items to create a device from a concept and tested them with his created testing tools. Our Advantages are very great today, yet the items Tesla created where created with the intent of a result. Meaning his created items and tools were much simpler in thought and in creation to achieve his goal. We today tend to over complicit in thought and how to do things. Tesla had very little at his disposal, we have to much for our brain to handle and keep looking for what we think is needed to do the job. Simply put Tesla was a free thinker, observer and intuitive. More importantly he keep things simple. How many times did it take Thomas Edson to come up with the light bulb. How many times did it take Tesla the come up with the AC system. What you folks are doing is needed. Keep the team work up.

@MasterIvo 3 жыл бұрын

thanks! yes intuition, open heart and the right tools

@dogstar167 3 жыл бұрын

hey Ivo great to see you back my man

@MasterIvo 3 жыл бұрын

thanks :D

@dmtechdm 3 жыл бұрын

Bravo Ivo,samo naprid.pozdrav iz Kanade

@MasterIvo 3 жыл бұрын

can you run this through google translate?

@Buzzhumma 3 жыл бұрын

in respect to timestamp 35 min ..... could it be out of phase because of a type of eddy current where the coils being so close together actually end up fighting each other in discharging their energy back and forth instead of straight into L3. maybe apply a spacer between L1 and L2 and see if it amplifies L3 .

@domdom4624 8 ай бұрын

thank you so much! i'm too doing thing like you but couldnt found much information as you give to link all the knownledge I had. Not much people really understand whats is happenning inside these circuit and with no text book to explain, we need to found out all by ourselve. If I can give you a hint to help you, watch the power too on the oscilloscope that help to understand certain part. I make others circuit than your but using same principle and got similar result but I can adjust different parameter to have different effect. Have Good Times. We gonna make this wolrd great togheter.

@MasterIvo 8 ай бұрын

It is all new yes. I am going to. introduce a high voltage phase shifted coil

@JohanZahri 3 жыл бұрын

Just a hunch, Water molecule has the H2O config, what if O is the L3, and the 2 H's are the L1 and L2? Since this has a lot to do with longitudinality and electrostatic-ism, may be it explains something?

@Buzzhumma 3 жыл бұрын

From my understanding so far we can only scale this for more power by using more mosfets as they can only handle so much power compared to what a spark gap can. Do you envisage being able to use multiple mosfets in parallel per coil to gain higher power and if so how well will they need to be impedence and gate resistance matched ? I am thinking along the lines of any higher quality inverter having this considerered or a zvs driver mosfet as they operate at very high frequencies . Is it possible with these diodes and sillicon mosfets to be within the specifications necessary for it to work or would it be more reliable to just scale it by complete extra units?

@MasterIvo 3 жыл бұрын

yes more mosfets, but In series not in parallel. this provides many problems. Scaling up would probably be best by developing parallel units. whereby multiple coils provide parallel power

@Buzzhumma 3 жыл бұрын

@@MasterIvo yes i agree it may be the best way to avoid so many complications . 👍🏻

@magtu96 3 жыл бұрын

You could try an FPGA to make a square wave signal, in it can be programmed the duty cicles at will, changing frecuency without changing pulse duration.

@MasterIvo 3 жыл бұрын

field-programmable gate array? Not looked into that. Would love to have a auto tuner.

@TitofBee 3 жыл бұрын

Hi Ivo, thanks for this work. Understanding the cycle, duty mastering, coil spacing, now let's maybe grow up in CpS and impulse voltages to get more Powaaa... i mean renforce the quantity of pulses and energy temporary storage. true RMS on L3 possible? have you tried any earth ground connection ?

@MasterIvo 3 жыл бұрын

I always use Earth ground. power is already generated out of L3, but its not tuned properly, I need both forms of induction simultaneous from L2 and L1 into L3.

@ThinklikeTesla 3 жыл бұрын

It would be super interesting to put some of these circuits in a simulator to see how much they agree with measured results.

@MasterIvo 3 жыл бұрын

yes, indeed. It will probably show the flaws of the simulator, as it is based on flawed math, which has excluded the longitudinal wave interaction

@dabbia4900 3 жыл бұрын

amazing JOB.!!

@MasterIvo 3 жыл бұрын

thanks

@sidster64 3 жыл бұрын

Very good I do believe the answer is in the magnetic field/Permeability of core Yes frequency is very important . Yes you can do it with bifilar coil ,Conductor have limited magnetic permeability

@MasterIvo 3 жыл бұрын

thanks!

@sidster64 3 жыл бұрын

@@MasterIvo Remember Tesla was a innovator looked at hundred's of perspective and merge them, Water flow to every perspective of nature

@allanlind676 3 жыл бұрын

When creating Ether stress with the intention of creating Radiant Energy it has been stated that the stress polarity must be always in the same direction such that you are continually pushing the Ether in the same direction with each pulse rather than pushing and then a half cycle later pulling the Ether. Does this make sense? I other words is your half bridge doing a push, push, or a pull, pull, as opposed to a push, pull?

@MasterIvo 3 жыл бұрын

as we deal with oscillations, the direction swings back and forth, by using the right polarity impulses, we get a pull pull situation. Amplification comes from both polarities, as they lign up with the polarity of the oscilation. You see it is all relative. it looks push pull from a distance, but if you look at the movement of the Aether field, it is a pull pull.

@allanlind676 3 жыл бұрын

Troll Alert

@MasterIvo 3 жыл бұрын

@@allanlind676 Indeed Allan. Troll removed and blocked

@walteralter1686 10 ай бұрын

Heads up on a typo on your website home page. You have used the word "today" twice where once will do the job. Cheers. "This website is dedicated to my continuing open source research into Nikola Tesla’s Radiant energy. Today the Tesla Coil today is well known, but is actually only a resonant coil. "

@williamgreenhouse6418 3 жыл бұрын

Hi Ivo, good to see you putting out videos again! Have you considered looking at the properties of the pancake using Joseph Newmans (The Energy Machine) unified physical theory, basing all electro magnetism and much more on electron spin and torque, it makes the properties much more predictable as a model. You could then better predict outcomes, that currently you observe as unknown or strange with this method and you can more easily determine the parameters to alter the running of the circuit. Interestingly what he does not cover in his book is resonance, however extrapolating his concepts, I believe that in the physical universe energy can be re-purposed or transformed from A to B. At Resonance we see a jump in energy availability and I believe it is an access point from the zero point energy field outside space and time, being brought in, hence a new input into the universe. Keep up the exploration! Will

@MasterIvo 3 жыл бұрын

I consider the "electron" as to be more or less the connection of the dielectric field line (faraday tube) to the conductor. And The "electron" can be used to calculate, thats why JJ Thomson invented the corpuscle, that led to the nobel prize, as it was recognised as the "electron" (which is falso in my opinion). I basically know the work of J Newman, but it has no value to me

@williamgreenhouse6418 3 жыл бұрын

@@MasterIvo Just a thought!

@HenryB51 3 жыл бұрын

I realize that this is a solid-state circuit, therefore my question may seem silly. That having been said, is there any spark discharge anywhere in the circuit, however slight? If there is, is it green?

@MasterIvo 3 жыл бұрын

No there is no spark, the energy is directly transformed. much more efficient. a spark has great losses

@Xeno_Bardock 3 жыл бұрын

What if you power a Plasma Globe with your Radiant Half-Bridge Circuit instead of Halogen Bulb? Will we see a visual difference between transverse and longitudinal electric waves with how plasma behaves inside a Plasma Globe?

@MasterIvo 3 жыл бұрын

A plasma globe could show interesting results. but it needs much higher voltages to work.

@pierrecotnoir5186 3 жыл бұрын

hello mr ivo, the problem when having the coil one above the other is when one is cut to give the voltage peak there is unfortunately the magnetic field which reverses on the bifilar coil so it may be that it creates some ridge cancellation so maybe some weird results i am translating this text because i am french canadian so i hope the translation is correct

@MasterIvo 3 жыл бұрын

Ridge cancellation? It is probably not translated correctly. yes the magnetic field changes, but actually it is also a current sine wave

@florianpolster2211 3 жыл бұрын

I like that you use sacret geometry (Phi) in your coils and i also had the idea using audio cable for a bifilar coil but i think i realised that this just suboptimal. the bifilar technique focus on dielectric component of the energy field and not on the magnetic as you already explained. So a side-by-side-winding would be better than a on-top-winding, isn't it? Could you try to build a side-by-side-winding as the tesla patent shows? And on the next step: whats about using a flat ribbon of copper instead of a wire -> the dielectric component (capacitor) will rise a lot because there is more area where charge can be gathered, more turns (smaller gaps) with the same properties of the coil because the ribbon is about 0,1mm thick and not 2,5mm, and with the right width of the ribbon the resistance would be still very low (it would also support the skin effect on high frequencies that you also use). Please think about that ;)

@MasterIvo 3 жыл бұрын

yes, I have done it in the past. but both components are important. to produce power you need the dielectric field (voltage) and the magnetic field (current).

@craftymulligar 11 ай бұрын

I heard on some video on the hairpin circuit maybe you will more perspective.

@danielvanachterbergh8103 2 жыл бұрын

Ivo why do you connect everything to earth ground and not the ground from the power supply?

@MasterIvo 2 жыл бұрын

The L1 coil to produce a solid high voltage on one side, must be grounded stable on the other side with no fluctuations. psu is also earth grounded, but has thin leads.

@omidyousefian4109 3 жыл бұрын

Thank you. Just donated a small amount.

@MasterIvo 3 жыл бұрын

Thank you very much, I have received it.

@khwezimngoma 3 жыл бұрын

No doubt, this covers a lot of my questions. I wonder, if you kept on stacking them, what the effect might be, without changing you input power but rather changing your tuning parameters...? That anomaly was strange for sure wow

@MasterIvo 3 жыл бұрын

I also wonder If I can stack it. but that will be answered in the future. first I want a single setup to work. If it can be stacked to output can be paralleled for more power (would love to power a boat around the world)

@khwezimngoma 3 жыл бұрын

@@MasterIvo You have gotten me to think very hard about this subject, one of the things I wondered about last night: the smartest thing Evo did was to limit his working voltage to 1000V, the inductive spikes will always be there. Then what if one could enhance the experiment by increasing the total size of say each pancake coil, one mile wiring each, hollow tubes etc... as a means to harmonize with much larger systems of frequency, and increase the sensitivity of the device? Would probably need some kind of special amplifier right in the middle of the super large pancake coil. Anyway, just a random thought on how one could get a closer look at what is possible with these clever yet so simple coils. Tesla used spark gaps, you used MOSFETs, very interesting. This prompted me to go look at high voltage MOSFETs, found some, but the higher the frequency the lower the voltage supported and more money. Very wise decision to limit this to 1000V.

@bmind23 3 жыл бұрын

What is your scope program?

@MasterIvo 3 жыл бұрын

r&s 2004

@Buzzhumma 3 жыл бұрын

What is the best way to send some funds yourway without paypal leaching away like last time?

@MasterIvo 3 жыл бұрын

if you send me an email we could talk about it

@atum7355 3 жыл бұрын

Even though the voltage polarity is reversed for the impulse, the direction of magnetic field does not change which meant current can still be amplified.

@MasterIvo 3 жыл бұрын

it looks like that

@williamgreenhouse6418 3 жыл бұрын

@@MasterIvo You might be able to increase current by increasing the thickness of wire used in the pancake, if you think about it in terms of a homopolar generator and available electrons to be pushed.

@MasterIvo 3 жыл бұрын

@@williamgreenhouse6418 I already increased the coils to 2.5mm2 for less resistance. "electron" is part of the field.it is the Fields that pulls.

@maxarnautov2618 Жыл бұрын

Hi Ivo, the PCB link is down. Will it available again?

@MasterIvo Жыл бұрын

I was flawed, I made a new design, but now the main part isn't available anymore, so I need to redesign it completely with available parts

@alanx4121 2 жыл бұрын

Did you know that the hairpin effect of potentials and nodes on the stout bar is caused by an impedance effect? Am trying to learn about Tesla's tech and found this statement I think it means that the bars become self-inductive and / or capacitive at specific frequencies, and nodes appear at resonance, but maybe it's wrong.

@MasterIvo 2 жыл бұрын

maybe the impedance effect is here: magnetic field(current) is related to space, dielectric field (voltage) is related to counter space. maybe, the sudden change in voltage (impulses) change the impedance of counterspace. changing the capacity

@bobhope102 3 жыл бұрын

What are some practical applications for something like this ?

@MasterIvo 3 жыл бұрын

This still is purely for research.

@florianpolster2211 3 жыл бұрын

In the book “Secrets of cold war Technology” is written, that the radiant energy only appeared by unidirectional pulses. The effect dont take place if there is any reverse direction. that is why Tesla used the spark gap. Could it be that diodes cant do unidirectional pulses because of leaking current? Isnt it the most important fact of the radiant energy? Do you keep this on mind while developing your circuits? cheers

@MasterIvo 3 жыл бұрын

yes. but tesla later used coil discharges instead of capacitor discharges. The coil discharges are also unipolar. I use both polarity impulses alternating as Tesla also did.

@shauthentic 3 жыл бұрын

excellent work. Your detailed explanations are valuable. Thanks for your hard work... ... can you chart the input Wattage vs the output? What is the amplification result, meaning what is your COP or coefficent of performance?

@MasterIvo 3 жыл бұрын

14kW? how did you come to this conclusion?

@shauthentic 3 жыл бұрын

@@MasterIvo sorry, perhaps my observations were incorrect... can you chart the COP?

@shauthentic 3 жыл бұрын

@@MasterIvo I saw that your peak output was 1.3Kv x 10.9amps = 14kW., is that incorrect? (The highest I saw was actually 3.7kv and 10.8amps) . At that point, what was the input?

@shauthentic 3 жыл бұрын

@@tanner1985 I saw a peak voltage over 1300 and amp at 10.9, is this incorrect?

@GerolamoUrsidYulin 3 жыл бұрын

Good work. Thumbs up. I don't have enough knowledge to judge the innovative vallue of this project. Yet I can see you've made a complicated set up using unconventional science and you've proven it does work. May I know what nationality are you?

@MasterIvo 3 жыл бұрын

thanks! I am Dutch

@DavyOneness 3 жыл бұрын

Thanks for sharing the video. I think you need to consider something in your circuit. Diodes are short circuits until they are reversed biased, so your switches are never truly "open". Instead of adding diodes to defeat the mosfet diodes, why don't you just burn those internal diodes out by running some current through the diodes on their own to burn them out. If you want a "open" that is more like a mechanical contact "open", I would recommend experimenting with using a SCR in series with mosfet for switching

@MasterIvo 3 жыл бұрын

I like your creative thoughts. But the body diode of a Mosfet is not optional, it is there as being part of the way a Mosfet works. if the body diode dies, the mosfet dies. The mosfet bypasses the body diode, when it opens. And the series diode opens for the external DC. It only blocks the impulse (reverse polarity), and does this very fast.

@DavyOneness 3 жыл бұрын

@@MasterIvo I said it because I had heard John Bedini say that he did that for something once. But he never said how he did it, I just assumed you you run enough forward current through that diode to burn it out, without anything else hooked up to the fet.

@MasterIvo 3 жыл бұрын

@@DavyOneness no a mosfet doesn't work like that. but it would be a great solution. I tried IGBT's without diodes, but they turn off to slow, so you don't get a proper impulse

@DavyOneness 3 жыл бұрын

@@MasterIvo I think Paul Babcock has the best idea, a mosfet In series with an SCR. The SCR turns on fast (like in a crowbar crk)and is the best "off" condition when compared to transistors and mosfets, but it isn't easy to turn off fast. BUT! that is where a low resistance series mosfet comes in. It will be limited in the high freq you can go with it because of the SCR limitations with reset time. I'm sure your circuit is fine like you have it, just something to keep in mind when it comes to approaching switching, especially when wanting spark gap kind of results.

@JohanZahri 3 жыл бұрын

Can we calculate the speed of "electron"/"electricity? does it exceed the speed of light?

@MasterIvo 3 жыл бұрын

Yes, Eric Dollard did, and showed this in his borderland videos. he showed, longitudinal resonance is faster (depending on coil geometry)

@williamgreenhouse6418 3 жыл бұрын

I think E=MC2 here, so it will not exceed the speed of light. Not sure how to calculate speed here though!

@MasterIvo 3 жыл бұрын

@@williamgreenhouse6418 Speed actually isn't correct, as fields are not things/ particles, it cant have speed. It is more correct to call it "rate of induction".

@williamgreenhouse6418 3 жыл бұрын

@@MasterIvo Thanks Ivo, I am still thinking about this in terms of Joseph Newman just to play with the model and would need to do tests. So am thinking that a field is actually electrons activated to spin in a certain direction and angle, this also could be used to predict gravity in a demonstratable way as well as heat and I suspect provides a way to traverse time packets, if you think of the universe as a projection, so plays like a film strip and it is possible to jump from one image to any other on the real, which would constitute what we call time travel. Just having a play and seeing what works! :)

@slobodannedic1799 2 жыл бұрын

It has not been clear to me if you did attain the overunity effect !? As for the underlying mechanisms, it looks to me that two of articles/videos of Sergey/i Dey/ina have the two constituents of your configuration, with the great contribution of yours in combining and varying the inductor discharge and the resonant capacitor charging … BTW, regarding the overunity and self-working features/ potentials of your configuration, if the L1 would be the part of a DC-motor, the more than 100% efficiency of it might be attainable without any degradation of the systems inverting part !?!

@MasterIvo 2 жыл бұрын

I did not attain it (yet)

@thecharlygroovework 3 жыл бұрын

in the experiment of minutes 19:19 aprox the suppose anomaly happen because when you add the impulse in the same direction of the wave amplitud it generate a broken symmetry bigger than the one who generate the wave, you can imaging a swing, the impulse will be add in both direction so the overall kinetic energy will be summarized with both impulse and it will produce an amplification on the kinetic energy of the swing

@MasterIvo 3 жыл бұрын

thanks for sharing, I'll take a look at the time stamp later

@thecharlygroovework 3 жыл бұрын

@@MasterIvo great video, you may want to add some negative resistance to the circuit in order amplify the current even more, the key to the unlimited energy from the vacumm is the relaxing time of the materials wich is the time needed for the electrons to flow free to the surface if you can dope a material in order to slow down that period you could get as much as you want from a battery with a flip flop circuit for example without depleted it, there's a book from tesla talking about this stuff

@MasterIvo 3 жыл бұрын

yes thw kinetic energy of the Aether volume in motion (max when current is zero) is increased by the impulse. But is the push transverse of longitudinal?

@MasterIvo 3 жыл бұрын

@@thecharlygroovework negative resistance = discharging the capacitor (negative current) Which book from Tesla is that?

@thecharlygroovework 3 жыл бұрын

@@MasterIvo it is longitudinal

@jimstamos4073 2 жыл бұрын

Hi Ivo, the links don’t seem to work

@MasterIvo 2 жыл бұрын

yes, the circuit also didn't work as expected. I am giving the design an update right now

@killyblam3 3 жыл бұрын

Master Ivo, can this be used for healing?

@MasterIvo 3 жыл бұрын

yes, it can, but it is not my focus right now.

@richardnoordhoff4288 3 жыл бұрын

@@MasterIvo when we can stop the greedy energie companies there's healing as well :-)

@MrForushani 3 жыл бұрын

My thanks for great work I sent a small paypal As I told you before, I am retired and little electronics background Can u give me the details on the capacitors please for the coils? Thanks again

@MasterIvo 3 жыл бұрын

thanks for the donation. caps: wima fkp1 or mkp10, tuning with 1nf and 10nf values in parallel

@Gacha.Cupcake 3 жыл бұрын

@@MasterIvo thank you sir

@cold3lectric 3 жыл бұрын

Got mine ordered from jlcpcb already, wo0t!

@MasterIvo 3 жыл бұрын

Super!

@chrisrosenkreuz23 3 жыл бұрын

What if the Ground isn't a drain like standard electrical theory supposes? I mean I'm no expert but the way I see this is from a musical perspective: sympathetic vibration, like when you hit a piano key and a string of the same note on a guitar you have lying around in the same room will start vibrating on its own in resonance with it. I've heard it being said that Tesla used the Ground like a pump and this makes perfect sense in this manner, with the Earth being one big capacitor. Like... what if your whole setup actually acts like one big resonant coil for the ground? What if ALL electrical circuits act like that, with the work per se only providing the resonance needed to "pump" the thingy out the ground (just with very little efficiency since they're not tuned for resonance to begin with)? Then most of the work around the world wouldn't be provided by the motors powering the circuits doing the work per se, but by the ground, with the motors themselves actually providing resistance, impeding resonance.

@MasterIvo 3 жыл бұрын

once it works, we will know

@AntonDremlyuga 3 жыл бұрын

Hallo мастер Иво!

@MasterIvo 3 жыл бұрын

Привет спасибо вам

@scouterstu5856 Жыл бұрын

👍👍🖖

@MasterIvo Жыл бұрын

🖖🏼

@lien3729 3 жыл бұрын

watching the video but still can't understand what this all about

@MasterIvo 3 жыл бұрын

That's normal. It is about resonance, and creating power from it.

@libertymouth6826 3 жыл бұрын

you think like a troglodyte, Tesla was talking about open circuits, you just closed the circuit for what application? Did you try sending the and receiving the impulse at distance? According to Teslas journal he could send and receive the radiant signal at any distance please try to do that instead.

@quantum-entanglementinmagn6728 3 жыл бұрын

Hello, With much respect, You know that we have technology that makes what your doing like child's play. We have about 1000 years into the future advanced tech hidden by the governments. They unfortunately they are laughing at us talking and watching these videos. Good luck and hope you understand my point.

@strangescience3414 3 жыл бұрын

What that has to do with something we can use🤷‍♂️

@sinsemilla9876 3 жыл бұрын

dead people don't laugh

@MasterIvo 3 жыл бұрын

I understand. I'm laughing all the time, when I discover each step that is needed to reach my goal. In the end we will all laugh

@strangescience3414 3 жыл бұрын

@@MasterIvo respect the courage to find out what is possible. And the audacity to try.

@juanmf Жыл бұрын

Radiant half bridge circuit PCB missing. Links on your site to the PCB are broken. radiant-half-bridge-900 (404: not found) easyeda /editor#id=1fa6ba959b6844d598ef1974f6bed660 (not found.)