Follow these instructions to assemble the RadRunner and RadRunner 2 electric utility bike. Be sure to perform all safety checks in the owner’s manual including a handlebar twist test, handlebar push test, ensuring the front wheel is properly secured, and all parts are tightened and torqued properly.
Ebike models with rigid front forks now come with a bolt-on axle mechanism for the front wheel. Depending on when your bike was manufactured, you might still receive an ebike with a quick release axle, in which case use the instruction found in this video and your owners manual. If you received an ebike with the bolt-on axle, follow the installation steps in the link below, in place of the front wheel installation steps described in the assembly video and your Owner’s Manual. This link will also help you determine which type of axle is on your front wheel if you are unsure: support.radpowerbikes.com/Mai...
Assembly Sections:
00:00 Unboxing and Removing Packaging
00:51 Included Hardware and Tools
01:10 Recommended Tools
01:17 Install Handlebar
01:44 Install Pedals
02:01 How to Identify What Type of Axle is on Your Front Wheel
02:38 Install the Front Wheel with a Bolt-on Axle
06:31 Install the Front Wheel with a Quick-release Axle
10:46 Front Wheel Safety Check
11:50 Inflate Tires
12:01 Install the Headlight
12:47 Check Chain Tensioner Alignment
13:01 Adjust Seat-post
13:30 Final Steps/Additional Resources
NOTE: The brake pad spacer at 3:23 is not included with all bikes. It is not needed for the proper assembly or safe operation of the bike. If your bike has one please remove it and recycle it.
Download the latest version of your owner’s manual at www.radpowerbikes.com/manual
Get help from a local, reputable bike shop if needed, and contact Rad Power Bikes Product Support if you have any questions.
www.radpowerbikes.com/help
The RadRunner 2 is available now at: www.radpowerbikes.com/collect...