Raising a silver tumbler (Tumling)

Рет қаралды 20,363

Күн бұрын

When I say ”Tumbler” you probably think of a glass, but it comes in a silver variant as well. The Danish/Norwegian take on this is the Tumling a small cup for drinking snaps. It is designed so it will return to standing position, however it is set down, which can be very useful after a few snapses.
Raising is done by supporting the silver on a stake (in this case wood) and hitting it where it is not supported. In that way the silver bends down to the stake without being thinned.
Raising can be done with a wooden stake and a steel hammer, a steel stake and a plastic or wooden hammer or if you are very experienced with a steel stake and a steel hammer.

Пікірлер: 51

@viv5645 6 жыл бұрын

I agree, really inspiring! I love your videos showing all the stages with just enough info.- thank you. I'm also amazed you can do this in 3 hours. Much prefer no music, I need to concentrate on how you are doing what you do.

@kokotepeyac 4 ай бұрын

I have often wondered if people used wooden stakes for raising and know I see how it could be done. Thank you for showing us this!

@ShapingSilver 4 ай бұрын

Yeah, it's not so fast to raise on wood as on metal, but more forgiving and inexpensive. Good qualities if you are just starting out. I have also seen people raise with wooden and plastic hammers on steel. Thanks for watching!

@Holy_Maker 2 жыл бұрын

Recently, I also met a person who makes tumblers out of silver in Korea. I'm worried that my body will be hurt by countless hammering.

@ShapingSilver 2 жыл бұрын

If I were to mass produce them, I would do the shaping with a big dabbingdie and just do the finish by hand...

@dl7775 2 жыл бұрын

I like how you spent so much time drawing the guidelines, when the center one is all that mattered 😂

@dornwilliston1696 4 жыл бұрын

Awesome, exactly what I was looking for. Thank you so much.

@thisguylovebananas 6 жыл бұрын

I wanna do that, thank you for showing how to do it. Love your video 😄

@boodlesboodles 3 жыл бұрын

Wonderful video of amazing work. Thank you for sharing!

@ShapingSilver 3 жыл бұрын

Thank you and thanks for watching. :-)

@nunyabiznes4471 Жыл бұрын

Excellent video! ❤

@ShapingSilver Жыл бұрын

Thank you. 😊 Glad you enjoyed it.

@Makermook 2 жыл бұрын

Very nice! You've inspired me to make some tumlings :)

@ShapingSilver 2 жыл бұрын

Thank you. Good to hear!

@dandalgleish1137 2 жыл бұрын

great video - thanks

@DEdens1525 Жыл бұрын

Nice work.

@ShapingSilver Жыл бұрын

Thank you. 😊

@guytiips3906 4 жыл бұрын

Amazing Tools (D. I. Y) Thank god !! I found your video clip.

@ShapingSilver 4 жыл бұрын

Thank you! And thanks for watching. :-)

@TheGoodoftheLand 6 жыл бұрын

You make it look so easy! Is it the schnapps?😁

@ShapingSilver 6 жыл бұрын

Thank you Justin! No, raising and snaps only leads to sore thumbs. :-) It comes from someone putting a hammer in my hand and telling me to practice... if you know what I mean. ;-)

@quentinhaney1378 3 жыл бұрын

Nice

@quentinhaney1378 3 жыл бұрын

Nice

@doledesigns5938 6 жыл бұрын

Oliver this was amazing!! How long approximately does this process take from beginning to end once you have your piece of silver prepped??

@ShapingSilver 6 жыл бұрын

Thank you Cheryl. With moving the camera around, pickling and polishing about 3 hours. I'm not the fastest raisier in the world. ;-)

@doledesigns5938 6 жыл бұрын

Shaping Silver ok so I can count on about 5 hrs because I’m not fast either. I really am looking forward to doing this, I will show you when finished. I doubt it will be anywhere as nice as yours but it would be a great learning experience!!

@lisae.7851 5 жыл бұрын

This is great! I am going to try on copper first (and maybe second, third....). I like the wood stake and I think I can make that. I have seen the other method of "sinking" first, elsewhere. I like your method better.

@ShapingSilver 5 жыл бұрын

The wooden stakes are easy to make and even wittel them with a knife, if you don't have a woodworking shop. Sinking and raising differs quit a bit, as you thin the metal by sinking. So if you want to make deep items like bowls, goblets etc., raising usually the way to go. :-)

@ohev1 5 жыл бұрын

Shaping Silver I agree. I usually sink first. This method looks like it can compress versus thin. Using wooden stakes is better in many respects.

@rajusoni3217 Жыл бұрын

Very awesome work brother ji🌹❤❤🌹👌👌

@ShapingSilver Жыл бұрын

Thank you, I appreciate it! 🤜🤛

@wladimirtrabsky6653 3 жыл бұрын

This is what my wife wants me to forge. Looks so easily done!! Very good and instructive clear videoclip. QUESTION: I want to make a tumler of, say, 10 cm diameter. What diameter should the silver circular plate be then? Should it be 16 ? (then the surface of the plate is 4 times latger, which seems logical)

@ShapingSilver 3 жыл бұрын

Thank you. It depends on the depth and I would recommend making a prototype first. If you draw it from the side in real size and measure from the rim to the buttom and back to the other side, you will a good indication of the diameter you need. Thanks for watching!

@michaelparsons6537 5 жыл бұрын

Hey there, where do you get your silver from? And what form is the t in?

@ShapingSilver 5 жыл бұрын

I buy mostly scrap cutlery and remelt it after testing for nickel. Ask in your local secondhand silver/coin store. New sheet, tube and wire I get from "Dansk ædelmetal" in Denmark. "Rio Grande" would be a good source in the US.

@Bhuvikasoni 3 жыл бұрын

Love from indian goldsmith

@sran666 3 жыл бұрын

wonderful.. do u sell one of this small tumbler

@ShapingSilver 3 жыл бұрын

Thank you. No, sorry, my work allows me wery little time in the workshop as it is now. Thanks for watching.

@istvanfulop3110 4 жыл бұрын

Tanulómnak 1 óra alatt, fel kell húznia egy ilyen félgömböt ! Kicsit más technológiával!

@ShapingSilver Жыл бұрын

Yeah, today you would probably spin or stamp them out. Thanks for watching.

@angelalambert3318 3 жыл бұрын

Hi oliver, would you consider making me and silver dinnerware set with cups, plates, bowls, knives, forks and spoons? I could pay for your services?

@ShapingSilver 3 жыл бұрын

It would be an interesting project, but quite an undertaking. Send med a mail and we'll talk about it.

@ohev1 4 жыл бұрын

Hi. I am making a tumbler and following your method. I like how you are pushing the metal over the stake vs thinning the metal. What gauge did you start with? What gauge did you end with?

@ShapingSilver 4 жыл бұрын

Excelent! As far as I remember it is 1 mm, so about 18 gauge. Supposedly 18, but more like 16 at the rim. Let me know how it turns out. Thanks for watching!

@ohev1 4 жыл бұрын

I will let you know. I have made other cups and bowls. I enjoy seeing other techniques. Many people start with sinking. As you demonstrated this is not always necessary. When I was taught years ago, we just used metal stakes. I had to figure things out myself to use wooden stakes. When you bough (?sp), why not use a leather mallet? Don’t you risk thinning the metal? I strike around the edge of the cup so as to keep edge thick. I think doing this helps prevent cracking. What do you think?

@ohev1 4 жыл бұрын

Bouge

@ShapingSilver 4 жыл бұрын

@@ohev1Abramowitz yes, you are risking thinning the metal and could use a leather mallet, but if you have metal to metal contact you are planishing not bouging. ;-) Cracking come from overworking the metal, like if you roll down a sheet more than 50% of the thickness. I only striking the edge from the top to thicken it so the piece will appear made from thicker stock. If you don't have it, I can recommend the book "Silversmithing" by Finegold and Seitz. It's an excellent book on silversmithing techniques.

@ohev1 4 жыл бұрын

Shaping Silver Thanks. I will have to locate the book in my basement. I bought that book 30 years ago. It is a good book, but as I remember, it shows the use of metal stakes and hammers. Very traditional. I like how you hold the cup. I am holding the cup in a more “traditional” way and as the diameter is shrinking, it is harder to hold with my fingers.

@dordiwesterlund2528 2 жыл бұрын

You got a really nice result, but - I'm sorry for saying - I think that your technique is wrong. You end up putting way too much work in this. The hammer you use for the raising is not wide enough. You need a hammer with a face of 7 or 8 mm wide and you need to hit the metal harder: the silver will move as if it is chewing gum and you will have less hammer marks and less bumps, so there is less planishing to do. The correct hammer really makes all the difference. If you need to count your working hours, you simply have no time to raise this in 12 courses.