Raising the first arch of our Quonset Hut

Рет қаралды 23,921

Homesteadin' Ain't Easy

Күн бұрын

We learned a lot from raising the first arch of our Quonset Hut. It was some high anxiety, but we got through it!

Пікірлер: 20

@coolkatz6695 3 жыл бұрын

Good teamwork guys. Ill be watching closely since I plan on doing this also. Thanks!!!

@philliplawson2001 3 жыл бұрын

I woulda at least tried assembling one of them and using that lift to bring it up in the air, but I like life on the wild side.

@theRonnor58 2 жыл бұрын

That's exactly how I've done it in the past, it's tricky, but you don't fight the assembly. The lift does all the work. I've put up six of these years back before you tube was a thing for me. I would have filmed the build.

@Ridin599 3 жыл бұрын

Awesome! I just finished a Q-42 myself. Pro tip I used 3/8 diameter Phillips screwdrivers as drift pins. Works way better since you can go full depth.

@homesteadinainteasy5143 3 жыл бұрын

Thanks! We actually ended up using a bench grinder and ground down our drift pins so we get a much easier fit.

@billbridges5251 2 жыл бұрын

Good luck on your build. I believe you got real lucky on some your roughing steps. Better lucky than rich.

@jacquelinewood714 2 жыл бұрын

Found your video thank you so ☺ Helps me understand 😌 🙂

@rockandrattleretreat5830 3 жыл бұрын

Had to put up our Qounset one piece at a time with just the two of use working on it.

@homesteadinainteasy5143 3 жыл бұрын

Wow! Much respect! That had to be time consuming. But it's a labor of love!

@johngouker3887 2 жыл бұрын

Nice job 👏👏👏

@walterhynson2898 2 жыл бұрын

Yes you got it pull from the top.

@john6218att 3 ай бұрын

I would have had the rope draped over the railing and back down to the ground so the help could pull and help you lift at the same time

@stevehendrickson3425 2 жыл бұрын

How did you have your scissor jack you were on supported at the base? Were you concerned it might tip over? In retro spec would a crane to lift the 1st piece, at least, or maybe the 1st 2 pieces together to start the process been easier? Where does the water go that comes off the hut go? I haven't seen anyone address this issue.