No video

RAM tire pressure threshold adjustment with ALFAOBD!

  Рет қаралды 31,177

MKS Performance & Offroad

MKS Performance & Offroad

Күн бұрын

In this video we are going to show you how to adjust your tire pressure thresholds and eliminate that annoying warning light on our 2018 RAM 2500 or any 4th gen.. You can find support at the below linked websites and purchase by clicking on product links below. Please be sure to save a copy of your configuration to your Google drive so that you may revert back to the stock configuration if needed. The step is not covered in the video but it is on the forum referenced below. Follow us as we have more content and mods COMING SOON!
Please Hit the Like button and Subscribe if you haven’t already and leave us some feedback down below. Also, hit the bell next to Subscribe to turn on notifications so you don’t miss new upcoming videos!
Disclaimer All information provided by MKS Performance & Offroad in this video is furnished for educational and informational purposes only. MKS Performance & Offroad does not make any representation or warranties with respect to the accuracy, applicability, fitness, or completeness of the Video Content. MKS Performance & Offroad does not warrant the performance, effectiveness or applicability of any sites listed or linked to in any Video Content.
The Video Content is not intended to be a substitute for professional mechanic advice, diagnosis, or repair. Never disregard professional mechanic advice or delay in seeking it because of something you have read or seen on our channel.
MKS Performance & Offroad hereby disclaims any and all liability to any party for any direct, indirect, implied, punitive, special, incidental or other consequential damages arising directly or indirectly from any use of the Video Content, which is provided as is, and without warranties.
Products used in this video can be found here:
- OBDlink MX: amzn.to/33uVGy1
- OBDlink MX+: amzn.to/33uVGy1
- Lenovo Tab 4: amzn.to/35ro5GU
- Alfaobd: alfaobd.com/
- Kaod tech SGM bypass: www.kaodtech.com
I work with an authorized AMSOIL Dealer for all my lubricant needs. When you purchase AMSOIL products from Jason, you're helping the channel at the same time! Give Jason a call and he can help you get the products you need, just mention you were referred to him by this channel.
Jason- 440-731-6607
SAVE $$$ Become an AMSOIL Preferred Customer! For details, click here: www.amsoil.com...
Need something on Amazon? Please use our affiliate link:
amzn.to/3l7STV5
See our links provided below on products we have used.
STAY CONNECTED! Follow us on:
Instagram: @mksperformanceandoffroad
My Mod List:
-Fuel D588 20X10 Wheels
-Cooper AT3 XLT 35X12.50R20
-Raceme Ultra Programmer
-Isspro R30000 Factory match Back pressure gauge
-Katzkin Leather seat covers
-Weathertech floor mats : amzn.to/2YYvLvR
- Husky Floor Mats : amzn.to/2KL86Kn
-K&N drop in Air Filter : amzn.to/2N0DAPv
-K&N Filter Cleaning Kit : amzn.to/2Z26CnW
-Autometer A-Pillar dual gauge pod : amzn.to/2Z3t8ZX
-Alfaobd programming factory features
-KAOD Tech Security Gateway Module Bypass Harness
-Spray in Bedliner
-RAM Cargo LED Bed lights : amzn.to/2KMnXIK
-Bilstein 2.3” Level Kit with 5100 series shocks for diesel : amzn.to/2YG1W81
-Obdlink MX+ : amzn.to/2H3Xt46
-Black Cummins Turbo Diesel Badge : amzn.to/2Zxwa8E
My Vlogging Gear (Affiliate Links):
Cameras
1. Iphone 8
2. Nikon D3200 amzn.to/2LA1ErD
DISCLAIMER: This description contains affiliate links, which means that if you click on one of the product links, we may receive a small commission. This helps support the channel & allows us to continue to make more videos like this. Thank you for your support!
Send us stuff (if you like) & we’ll feature it in a future video.
MKS Performance & Offroad
PO Box 16
Olivia, NC 28368

Пікірлер: 82
@mikecastillo8747
@mikecastillo8747 3 жыл бұрын
We've got a 2013 chrysler t&c, replaced the sensors then found the monitor itself is bad, can it be fixed or replaced? Btw- great video!
@MKSPerformanceOffroad
@MKSPerformanceOffroad 3 жыл бұрын
You can probably replace the faulty monitor.
@kenle3419
@kenle3419 2 жыл бұрын
Hi Charles, I did everything you said in the video and it worked like a charm. However, I was trying to find out how to change my LED lights and a new set of error codes appeared: 1) engine light, 2) ABS and 3) Park Sense. I back-tracked through what I did and didn't see where I could have made a mistake, but the lights are still shining bright. This is new to me and frankly I was reluctant, but after watching your video, I thought this would be easy enough, but maybe I shoulda left well alone after I cleared my TPMS errors. so any help would be greatly appreciated. Thx! Ken
@MKSPerformanceOffroad
@MKSPerformanceOffroad 2 жыл бұрын
What changes did you make for led lights? You will need to look at the bcm file config file and compare to new file line by line to see what has changed
@kenle3419
@kenle3419 2 жыл бұрын
@@MKSPerformanceOffroad all I did was cleared any faults. I was having a left turn signal tell me a parking light was out - that's it.
@MKSPerformanceOffroad
@MKSPerformanceOffroad 2 жыл бұрын
@@kenle3419 ok so you changed the thresholds in the rf hub and input the 4 digit pin, did you do anything else after that? What model year truck do you have?
@kenle3419
@kenle3419 2 жыл бұрын
@@MKSPerformanceOffroad yes, that worked great after I installed the 4-digit pin. I really only checked and cleared faults, but didn't make any hard adjustments. what is clear rolls info?
@kenle3419
@kenle3419 2 жыл бұрын
@@MKSPerformanceOffroad 16 Ram 2500 Tradesman Diesel
@bbruhn112
@bbruhn112 2 жыл бұрын
Is this just an app you can download off the App Store? If so what apps could work? I just got my 4 digit pin today but am located in New Mexico and nobody near me has any tablets that can adjust all four for me. Any help is appreciated! Thanks.
@MKSPerformanceOffroad
@MKSPerformanceOffroad 2 жыл бұрын
Yes download the app to an android device or windows computer and you will need the communication device like obdlink mx/mx+ or the cable ex to communicate with the truck. Any year 2018+ will need the security gateway module bypass harness such as 12+8 harness amzn.to/3z6SFVw which connects behind the radio. Kaodtech makes a harness that you can leave in the truck under the dash but the 12+8 has to be removed after configuration changes are complete.
@austinsmith347
@austinsmith347 Жыл бұрын
After I did this the low psi light won’t go away. Wasn’t there before. Any ideas?
@MKSPerformanceOffroad
@MKSPerformanceOffroad Жыл бұрын
What does it display on your dash and did you verify the procedure took in bcm?
@MKSPerformanceOffroad
@MKSPerformanceOffroad Жыл бұрын
Also, did you perform the rf hub reset and input your 4 digit pin?
@iammattjones
@iammattjones 2 жыл бұрын
AlfaOBD can read the 4 digit pin for you. Ne need to call the dealer.
@MKSPerformanceOffroad
@MKSPerformanceOffroad 2 жыл бұрын
It cannot read on all trucks, sometimes it works and others it will not.
@iammattjones
@iammattjones 2 жыл бұрын
Yeah worked on my Power Wagon. The dealer gave me shit asking for it.
@MKSPerformanceOffroad
@MKSPerformanceOffroad 2 жыл бұрын
@@iammattjones Awesome, wish it would work on every truck so we dont need the dealer for the pin. You can also use pinpuller and pay as alot of dealers are also charging for this. It would be nice for the newer trucks that roll the pin every 24 hr.
@bigdaddyshouse
@bigdaddyshouse 4 жыл бұрын
Fine job sir. You got the screen recording to work. What app did you decide to go with?
@MKSPerformanceOffroad
@MKSPerformanceOffroad 4 жыл бұрын
Mobizen, works great. Thank you sir, just trying to get some good info out there. This program is dangerous in the right hands...dealers need to watch out lol.
@bigdaddyshouse
@bigdaddyshouse 4 жыл бұрын
@@MKSPerformanceOffroad Yeees, Yes it is! Lol 😂
@teon39
@teon39 4 жыл бұрын
Will I need the 4 digit pin at all since I have completely removed the security gateway?
@MKSPerformanceOffroad
@MKSPerformanceOffroad 4 жыл бұрын
4 digit pin isnt for security gateway it is used for the rf hub.
@coletribble3210
@coletribble3210 2 жыл бұрын
I have a 2017 and followed these steps exactly.. when I get to the part where I enter in my pin, it says my pin is invalid? I called the dealer to check if the pin they gave me the first time was correct and he gave me the same one.. I’m not sure why mine isn’t working??
@MKSPerformanceOffroad
@MKSPerformanceOffroad 2 жыл бұрын
and you are doing the rf hub reset with the pin?
@MKSPerformanceOffroad
@MKSPerformanceOffroad 2 жыл бұрын
Follow this and let me know if you have the same issue. doc-14-70-docs.googleusercontent.com/docs/securesc/lavhkuaibkuef1q6qdoc8g84np12bul2/n79c9g1if2f3afiihq31htse5ej0qd08/1644702750000/16653456813080230356/16360536226333949950Z/16GbPkcfRuN0KIXkyi8ALPmXgR3QuHDZh?e=download&nonce=8hlcp6b1bp9iq&user=16360536226333949950Z&hash=apacksf9bsct4sr72pp2gruqivrft0ah
@coletribble3210
@coletribble3210 2 жыл бұрын
@@MKSPerformanceOffroad I’ll take a look at this when I get home later this evening and give it a shot. I’ll let you know how it goes. When I go to do the RF Hub reset and enter in my pin it says it’s an invalid pin for some reason.
@MKSPerformanceOffroad
@MKSPerformanceOffroad 2 жыл бұрын
@@coletribble3210 strange, 4 digit pin right? I know there is a 5 digit as well
@coletribble3210
@coletribble3210 2 жыл бұрын
@@MKSPerformanceOffroad yes, I’ve been using the 4 digit pin they gave me. It still keeps coming up as “invalid” for some reason. I was trying to get this taken care of before I got new tires but I got them installed today. Now my dash is saying to inflate the tires to the pressures I tried changing them to. 60 in the front and 55 in the back so it appears it might have worked? I’ve “cleared all faults” with the alpha and the front tpms went away and is now only telling me to check the back two tires even though they are both sitting at 57psi at the moment. Not sure how to get the light off.
@blakedexter3224
@blakedexter3224 3 жыл бұрын
I'm in France so where can i get the 4 digits because there is no dodge ram dealership
@MKSPerformanceOffroad
@MKSPerformanceOffroad 3 жыл бұрын
If you do a search for an app called pinpuller you can obtain the pin for a small fee.
@blakedexter3224
@blakedexter3224 3 жыл бұрын
@@MKSPerformanceOffroad thank you
@blakedexter3224
@blakedexter3224 3 жыл бұрын
@@MKSPerformanceOffroad i download3d the app but can't figure out how to get my pin
@rempel29
@rempel29 3 жыл бұрын
Could you not have used your MM3 to adjust the TPMS?
@MKSPerformanceOffroad
@MKSPerformanceOffroad 3 жыл бұрын
Absolutely, I have before. This was simply for those who may not have a programmer that does that or not at all. Tons of capability with this program.
@rempel29
@rempel29 3 жыл бұрын
@@MKSPerformanceOffroad ok perfect. I was looking into an MM3 over an Edge CTS3 for this particular reason. I can’t stand this TPMS light and I’ve only been dealing with it for a couple months lol
@MKSPerformanceOffroad
@MKSPerformanceOffroad 3 жыл бұрын
@@rempel29 I would honestly either buy an MM3 or a Raceme Ultra or an EZ Lynk over the edge. Alfaobd is still a nice to have program if you plan to make any other changes or additions to the truck in the future. The programmers will allow you to change specific settings where alfaobd will allow you to basically enable things in the bcm that the dealer has to add a sales code to activate. Hope this helps and clarifies.
@gunfreak565
@gunfreak565 4 жыл бұрын
Where do I go in Alfaobd to reprogram Speedo for oversized tires. Just got the app and can’t figure that out
@MKSPerformanceOffroad
@MKSPerformanceOffroad 4 жыл бұрын
gun freak kzfaq.info/get/bejne/jtdxfpigsdKtfqc.html should be in this video
@MKSPerformanceOffroad
@MKSPerformanceOffroad 4 жыл бұрын
Select the following, ram and whatever model 1500-3500, body computer, body computer my2013-17 powernet, click car open hood (bottom right corner). Select program tire size. Then go to beginning after you change tire size. Select abs at the top of drop down after vehicle selection. Then select abs ate/continental my 2013-17 powernet. Connect then hit car open hood. Select static ecu initialization. Start. Clear any codes and then go to Clearing rolls info. Start. Hope this clarifies.
@donphilippbar411
@donphilippbar411 3 жыл бұрын
Is there a way to calibrate the TPMS? I notice all mine are off by a few ILBS. Great job
@MKSPerformanceOffroad
@MKSPerformanceOffroad 3 жыл бұрын
I dont believe you can calibrate the sensors themselves only the thresholds the computer needs to see in order to turn the light on and tell you the pressure is high or low. How old are the sensors? The batteries in these things are only designed to last normally 5-7 yrs.
@donphilippbar411
@donphilippbar411 3 жыл бұрын
@@MKSPerformanceOffroad it's an18 . Thanks for responding back . Happy new year
@MKSPerformanceOffroad
@MKSPerformanceOffroad 3 жыл бұрын
@@donphilippbar411 np, batteries should be good then, the sensors will fluctuate and like anything are only accurate to within +/- a certain % usually about 3% or some manufacturers say within 1lb.
@mpbclutch33
@mpbclutch33 4 жыл бұрын
Figured out a way to disable the TPMS all together if you have Wheels without sensors?
@MKSPerformanceOffroad
@MKSPerformanceOffroad 4 жыл бұрын
13+ trucks are not capable of having tpms completely turned off.
@RoLowFilms
@RoLowFilms 5 ай бұрын
FYI, you can get your 4 digit pin USING ALFA OBD. No need to go to a dealer
@clintonsharp5111
@clintonsharp5111 3 жыл бұрын
@MKS Need some help plz!! Watched your video and bought an OBD MX+ BT with AlphaOBD. I have an 18' 2500 cummins. TPMS sensor light on. When I enter updated TPMS Threshold Settings, it basically gives me an error of failing to connect and says potentially bad OBD interface. Do i need a different OBD interface or is something in the setting messed up. It connects all the way through body computer and into update thresholds, it just wont go any farther. Help PLZ! Frustrated in WA- Clint
@MKSPerformanceOffroad
@MKSPerformanceOffroad 3 жыл бұрын
Are you using the threshold settings instructuons from cumminsforum.com?
@clintonsharp5111
@clintonsharp5111 3 жыл бұрын
@@MKSPerformanceOffroad no...just followed your video through the process...will check it out tho
@MKSPerformanceOffroad
@MKSPerformanceOffroad 3 жыл бұрын
drive.google.com/file/d/16GbPkcfRuN0KIXkyi8ALPmXgR3QuHDZh/view?usp=drivesdk
@MKSPerformanceOffroad
@MKSPerformanceOffroad 3 жыл бұрын
Try the document I posted and follow it. If nothing changes let me know.
@MKSPerformanceOffroad
@MKSPerformanceOffroad 3 жыл бұрын
@@clintonsharp5111 what year truck?
@sh0cktim3
@sh0cktim3 3 жыл бұрын
Tried doing this on a 2020 PW and the code will not work. It seems there is a 4 digit pin that keeps changing on the 2020s. I went to dealer twice already and they gave me two different 4 digit pins.
@MKSPerformanceOffroad
@MKSPerformanceOffroad 3 жыл бұрын
I heard the 2020 trucks roll the code every 24hrs. Not sure if thats accurate but they may have put a security feature in now to keep people from changing things. They have to obtain the code from fca directly each day so you have a limited time to use it. Search the forums and see what others with the 2020 trucks are experiencing. I believe this was the issue guys were having with the pins rolling for new trucks.
@MKSPerformanceOffroad
@MKSPerformanceOffroad 3 жыл бұрын
Did you use the pin within 24hrs?
@sh0cktim3
@sh0cktim3 3 жыл бұрын
@@MKSPerformanceOffroad yeah used it immediately in Dealer parking lot the 2nd time around. Im kinda stuck at this point with resetting the RFD HUB. Not sure what to do, but hopefully I'll run into some luck.
@MKSPerformanceOffroad
@MKSPerformanceOffroad 3 жыл бұрын
@@sh0cktim3 Ill do some diggin around and see what I can find, you sure they gave you the right pin?
@sh0cktim3
@sh0cktim3 3 жыл бұрын
@@MKSPerformanceOffroad yeah it was 4 digits all numbers, Not the 5 digit one that begins with a letter. Seems there isn't a permanent pin for 19+ trucks. So far Im discovering that 19+ HD trucks use a different RF Hub compared to pre 2019 trucks. Apparently no one has found a work around for updating these new RF Hubs yet. If you find anything I'd really appreciate it. I'm continuing my search.
@shanelilman3780
@shanelilman3780 4 жыл бұрын
Anyone here in Michigan willing to do that to my ram 2500????
RAM Alfaobd 101, What is needed?
8:56
MKS Performance & Offroad
Рет қаралды 113 М.
Kind Waiter's Gesture to Homeless Boy #shorts
00:32
I migliori trucchetti di Fabiosa
Рет қаралды 15 МЛН
The Joker kisses Harley Quinn underwater!#Harley Quinn #joker
00:49
Harley Quinn with the Joker
Рет қаралды 10 МЛН
Adjusting Tire Size with AlfaOBD on 2020 Ram 1500
9:06
DieselRebel
Рет қаралды 10 М.
Ram 13-18 TPMS: Change The TPMS Setting Yourself With Alfa OBD
3:43
Charles Pages
Рет қаралды 105 М.
ALFAOBD LED CHMSL & Cargo Camera Programming | 2018 4th Gen Ram 1500/2500/3500
14:22
MKS Performance & Offroad
Рет қаралды 17 М.
2022 RAM 1500 AlfaOBD Tire Size Adjustment and Speedometer
4:38
Aaron Lorentz
Рет қаралды 10 М.
Amazon TPMS Sensors for RAM truck DIY (Part 1)
18:26
anesthesiadreamin
Рет қаралды 27 М.
AlfaOBD Ram Enable DRL Daytime Running Lights Dodge RAM 1500 2500 3500
13:43