RAMPS 1.4 - LCD (REPRAP DISCOUNT SMART CONTROLLER)

Рет қаралды 86,188

6 жыл бұрын

This explains the process of adding LCD display.
One Time Tips, You Can PayPal Me:
www.paypal.me/EBraiman
buymeacoffee:
www.buymeacoffee.com/ebraiman
Required Hardware:
Arduino 2560 with USB cable
RAMPS 1.4
RepRap Discount Smart Controller kit
Required Software:
Arduino studios 1.8.2 or higher
www.arduino.cc/
Pronterface.exe
www.pronterface.com/
MarlinFW (Firmware 1.1.6)
marlinfw.org/meta/download/

Пікірлер: 109

@makespace8483 5 жыл бұрын

Good job. Clear, concise and helpful.

@EdwardBraiman 5 жыл бұрын

@gianandreacavallo9855 3 жыл бұрын

I NEED TO THANK YOU !! THANK YOU VERY MUHC! WITHOUT YOU I WOULD NEVER EVER BE ABLE TO MAKE MY RAMPS 1.4 WORKS.

@EdwardBraiman 3 жыл бұрын

You're welcome.

@johnfreddyvasquezmunoz1574 6 жыл бұрын

it was very help full. thankyou very much Edward

@sahilgupta-hd8gi 6 жыл бұрын

Thanks sir...that just save my couple of bucks...as my usb on board is not working properly...but now...i dont need a usb...all thanks to you.

@EdwardBraiman 6 жыл бұрын

No problem

@richardtapia6791 Жыл бұрын

thanks you bro, you saved me, I had been unable to fix the LCD problem for days. Blessings!

@EdwardBraiman Жыл бұрын

You're welcome.

@gabriel-tu6td 5 жыл бұрын

Good job , Edward .

@EdwardBraiman 5 жыл бұрын

Thank you.

@ikmalxhakim4419 2 жыл бұрын

Thank you very much, sir!!! You really helped me a lot! I love your video! Straight to the point😀😮😃😇👍👍👍

@EdwardBraiman 2 жыл бұрын

You're welcome.

@svenland6892 4 жыл бұрын

Thank you for this Sir!!

@EdwardBraiman 4 жыл бұрын

You're welcome.

@big_led 5 жыл бұрын

Very good , Very thank

@humanlife1968 4 жыл бұрын

very important video

@djmassive9326 4 жыл бұрын

muchas gracias maestrazooo!!! me funcion a la 1ra

@EdwardBraiman 4 жыл бұрын

De nada

@samoohalex 4 жыл бұрын

Hi, I have been watching your videos for a while and found them very interesting and useful. They really helped me to understand for ramp 1.4 in a better way. I had a little issues with my LCD (Reprapdiscount smart controller) which I managed to solve them after watching this video, but still one thing can't figure it out. I want to adjust the contrast (it is very high and I can hardly see the letters). unfortunately, the option of potentmeter is not available in the back of the LCD. I'd be grateful if you gave a hint how to solve it.. thanks in advance

@EdwardBraiman 4 жыл бұрын

Thank you. I'm unsure how to fix without a potentiometer. There maybe a wiki someplace with the information.

@isharamadushan7170 4 жыл бұрын

Good job

@funnkyone7659 6 жыл бұрын

thx , very helpful

@EdwardBraiman 6 жыл бұрын

You're welcome.

@piotrnod6489 4 жыл бұрын

ja ci dam po poliska mowić! subbed, thanks dude

@EdwardBraiman 4 жыл бұрын

Jestem polski, nie biegle po polsku. Mój dziadek jako dziecko mówił mi po polsku.

@cruzo2355 5 жыл бұрын

Am I right thinking that I need to have any programing board with USB like this Arduino one? Do I need to programi it? There is no way to just connect that to 12V supply so it can go with base program which I thing should be there allready? :/ thx

@EdwardBraiman 5 жыл бұрын

Arduino mega needs to be programmed for using. The Arduino mega might not be loaded with the configuration you require.

@acgkplh 6 жыл бұрын

Found you video which was helpful but hasnt solved my issue. I am using the mks gen L board and just have square blocks displayed on screen. Any help would be appreciated. Thank you

@EdwardBraiman 6 жыл бұрын

Thanks. So where are you seeing square blocks? What speed are you connected to device? What speed is specified in Marlin fw?

@acgkplh 6 жыл бұрын

Edward Braiman Hi. Really thank you for your reply. I solved my issue with the info from your video and also commenting out full graphical display which the originator of the MPCNC had enabled.

@chuckstoffregen8632 5 ай бұрын

I received an Anet A8 3D printer with no documentation, so I did some Google searching to see what I could find. I got it up and running with a couple minor setbacks but while adjusting a limit switch, I touched a couple of solder joints on the small switch pc board. I saw a bit of a spark and my controller screen showed rectangle shapes filling the screen. I hooked up my USB cable to my laptop and the screen went to the normal view but the main board was not powered up. When I plugged in the main power the screen went back to the rectangles and my laptop shut down. Now whenever I plug in the printer it blows the GFCI. Any ideas as how I can fix it?

@to-dodesigns 3 жыл бұрын

thnx for the tutorial very usefull, but I have a question, but if I no connect to usb the arduino the LCD not work. it's works only with conection to usb? how to configurig lcd for with no conection to the Computer?

@EdwardBraiman 3 жыл бұрын

Could you give me more details about you hardware?

@comachiu9658 3 жыл бұрын

I love you.

@justthings1483 3 жыл бұрын

Bro, i have a question, you can use cura while this is connected? Because when i put this all my config was delete and now i cant print with cura

@EdwardBraiman 3 жыл бұрын

This video was recorded in 2017, Cura version 3.0 came out and started to become popular in October 2017. Not sure I understand what you're saying.

@fazlaykhan 4 жыл бұрын

Should I get this one or the 12864 one? Does it really matter & does this one uses less computational power? Thanks.

@EdwardBraiman 4 жыл бұрын

Well the amount of processor usage is very low, but on RAMPS 1.4 I prefer Reprap Full discount Smart controller.

@fazlaykhan 4 жыл бұрын

@@EdwardBraiman Thanks for your quick reply. I might upgrade to a ultimaker gantry system. As the Arduino Mega(I've been told) sometimes can be bottlenecked, I'm a bit tensed about the processor usage... Thanks again

@EdwardBraiman 4 жыл бұрын

You're welcome.

@AndreMaxP51 6 жыл бұрын

Hi Edward, I have copy All the LCD part to my Arduino and my LCD is the same as your . The LCD lights up but no numbers only white squares. Any idea Thanks

@EdwardBraiman 6 жыл бұрын

Do you know if you ribbon cables are plugged in opposite connections? I have another video for this on MKS Gen L which is a similar process and better video quality ... kzfaq.info/get/bejne/fNhpdcybvp-toIU.html

@AndreMaxP51 6 жыл бұрын

hi. already check on your videos and follow proocesses an nothing hapens.

@EdwardBraiman 6 жыл бұрын

Could be a broken cable or LCD. It lighting up says power is working, but something else is not. What's the serial number on the LCD? It might be another selection in Marlin firmware.

@AndreMaxP51 6 жыл бұрын

the only nunber I can find on the LCD is KQP2286W2-00A .

@EdwardBraiman 6 жыл бұрын

Do you have a link to where you purchase it? Also how many pieces is it?

@shreyaskumar5366 2 жыл бұрын

Sir please give Discord link so I can discuss my problem with you... Link is not there in this videos description

@EdwardBraiman 2 жыл бұрын

Discord is KZfaq page. Click printer icon in KZfaq or my account name then discord link is there.

@MahitaSreekumar 15 күн бұрын

WHICH VERSION OF MARLIN SHOULD I NEED TO DOWNLOAD NOW

@EdwardBraiman 12 күн бұрын

Any version will work 2.x.x on Marlin website is most current.

@marekwilk9466 5 жыл бұрын

Uncommand of #define SD support made this error: pasting "* SPI Master In Slave Out pin" and "DDR" does not give a valid preprocessing token. Any help?

@EdwardBraiman 5 жыл бұрын

Which version of Marlin firmware?

@marekwilk9466 5 жыл бұрын

@@EdwardBraiman 1.1.9

@EdwardBraiman 5 жыл бұрын

Okay, I've tried, "#define SDSUPPORT" with a fresh download of Marlin 1.1.9 and compiled in Arduino IDE without issue. I also tried, "#define REPRAP_DISCOUNT_SMART_CONTROLLER" and both compiled separate and together. Is something else in the Marlin Firmware version 1.1.9 modified having to do with SPI support?

@marekwilk9466 5 жыл бұрын

@@EdwardBraiman I also downloaded fresh Marlin 1.1.9 and have the same error. Could you send me your working version? Thanks for your help. My email: wilkmarek11@wp.pl

@EdwardBraiman 5 жыл бұрын

What version of Arduino IDE are you using? My current version is 1.8.7. what is the operating system as well?

@glendooer6211 3 жыл бұрын

What reason would use the sd card for??

@EdwardBraiman 3 жыл бұрын

If you want to load print file (*.gcode) from lcd.

@glendooer6211 3 жыл бұрын

@@EdwardBraiman ok thanks or use the usb cable from pc?

@shreyaskumar5366 2 жыл бұрын

Sir I copied you steps in my Marlin.ino file and uploaded the code to my Arduino Mega 2560 with the Ramps 1.4 and its Full Reprap Discount smart controller connected But still there is nothing showing on the display... Just the backlight is on .. but that was on even before I changed the Marlin.ion code

@EdwardBraiman 2 жыл бұрын

This might be easier to explain in Discord chat in link below.

@shreyaskumar5366 2 жыл бұрын

@@EdwardBraiman ok sir I will join and ask my question there By the way you are the Quickest in whole youtube to give your fans attention

@shreyaskumar5366 2 жыл бұрын

Sir there is no Discord link.. please can you provide it?

@EdwardBraiman 2 жыл бұрын

@@shreyaskumar5366 Discord: discord.gg/JzhdGgr

@darksideadv 4 жыл бұрын

Hi how are you, I installed the marlin 1.1.9, but I get an error, the screen does not work the knob, I am using a 2004A screen. Another problem is in pronterface I move the axes, and they don't work, they get stuck, locked sometimes they move. I have 2 types of screen and in the 2 the same thing happens to me. 2004A LCD screen 2004 LCD screen They come in Kit with RAMPS 1.4.

@EdwardBraiman 4 жыл бұрын

Does the screen illuminate?

@darksideadv 4 жыл бұрын

@@EdwardBraiman No

@EdwardBraiman 4 жыл бұрын

Try reversing plug connectors to LCD.

@darksideadv 4 жыл бұрын

@@EdwardBraiman But they have a form factor, they need to change the connector,

@darksideadv 4 жыл бұрын

@@EdwardBraiman You think that the arduino IDE could be the cause of the problem, if you want the marlin I am using is a variant of the original marlin, since it is for the Prusa Bear, or prusa I3 MK3.

@UzunKamis Жыл бұрын

Is this LCD compatible with Ramps 1.6+

@EdwardBraiman Жыл бұрын

Maybe. I think there was an issue with this display way back when I tried to make a tutorial about 4 or 5 years ago. I can attempt it again this weekend.

@UzunKamis Жыл бұрын

@@EdwardBraiman Actually, I have ordered Rmps 1.6+ and 128x64 LCD yesterday. Probably, I will give it a shot in the weekend too. But it is the first time I will be doing this. Thank you.

@subscribetopewdiepie7073 4 жыл бұрын

i got a blank screen, please help

@EdwardBraiman 4 жыл бұрын

Have you tried reversing ribbon cable slots for exp1 and exp2 for the board?

@subscribetopewdiepie7073 4 жыл бұрын

nvm, i didnt realise i had a different screen to yours my was a full graphic smart controller I just downloaded the library and remove "//" on a different line and everything worked.

@EdwardBraiman 4 жыл бұрын

Cool.

@koresz35 Жыл бұрын

Sd kártyáról is gravíroz?nem ír hőmérséklet hibát?

@EdwardBraiman Жыл бұрын

Elméletileg ha gcodes fájlt használ, akkor képesnek kell lennie a gravírozásra.

@koresz35 Жыл бұрын

@@EdwardBraiman pontosan milyen alkatrészek kellenek ehhez a prjekthez?

@EdwardBraiman Жыл бұрын

@@koresz35 Szükséges hardver: Arduino 2560 USB kábellel RAMPÁK 1.4 RepRap Discount Smart Controller készlet

@koresz35 Жыл бұрын

@@EdwardBraiman hőmérséklet hibát jelez

@koresz35 Жыл бұрын

@@EdwardBraiman igen g kódot használok.de akkor is hőmérséklet hibát jelez.

@skystar80kmrider91 4 жыл бұрын

it not working i am very......................................

@EdwardBraiman 4 жыл бұрын

Could you give me a little more detail?

@gyaanvigyaan1349 4 жыл бұрын

Only the sound is coming

@gyaanvigyaan1349 4 жыл бұрын

But display don't response it show blank

@EdwardBraiman 4 жыл бұрын

Which version of Marlin firmware are you using? This was made several years ago. In new Marlin firmware you need to remove comments for x, y, z and E0. Search on A4988 in configuration.h if you're using Marlin firmware 1.1.9 or above.

@logiclandco 4 жыл бұрын

@@EdwardBraiman I am using 1.1.9, LCD lights come on but shows blank screen, although pressing knob makes sound through speaker. Edit: I adjust the contrast now, its showing garbage characters.. with 1.1.9. However with 2.0.4.4 it shows boot screen with Marlin version then shows garbage characters again.