Were you having issues with the Twelves? I really wish they would have worked out for me.

Yes I’m having trouble with the contour control knob on channel 2. When I raise the upfader on channel 2 there’s no volume when I raise or lower the upfader unless I turn the contour knob all the way to the right. If I turn the contour knob to 6 o’clock the volume is very low. I don’t have that issue with the channel 1 contour knob, what do you think that could be?? Please give me your input when you have time; your wisdom on this is greatly appreciated. Thank you 🙏🏿

You're Welcome! I'm glad it helped.

Screwface Muziq it’s crazy that this info isn’t in the manual. I almost sent my Twelve back for a refund until I called Rane.

Thanks! I’m glad it helped!

Jay Werx that’s how it should be! I’m loving this Twelve, how are you liking yours?

logisticalstyles I wish I had bought the 12s sooner. I’m never looking back

You're Welcome. I'm glad this info is helping people.

You’re welcome! I’m glad it helped!

No problem!!

I’m glad you were able to figure out the issue!

Nice! I think you will really like them. They make DJing more fun than the platters that don’t spin. Hopefully you won’t have any issues. Looking forward to the video!

Good Question. I did notice that they eventually added this to a Tip and Tricks page on the website. When I had this problem a year ago the info was no where to be found. I had to email Rane to get this info.

Yeah, I really tried to work with these over a couple of years including the MKII. They all had the same issues. Every day i see new examples of them messing up. I really wanted to like them but I ended up selling them and going back to turntables and using Phase.

@@logisticalstyles i still play traditional vinyl so the fact the twelves were only a dvs solution just didn’t make sense to me. I have my Technics and phase…however i did sell my S9 for the Rev 7. The best thing about that though i can still use my t-tables with the Rev 7.

I can’t because I no longer have the Twelves. I sold them last year and got a pair of turntables and Phase.

Dallas Slim thanks!

Then you might need to get Rane involved. I ended up selling mine and going back to turntables.

If the calibration doesn't fix it then you may need to contact Rane support.

That’s just they different way the two programs react. Technically the motor always has a drag when the start button is pressed regardless of what program is used. All turntables are like that. Virtual DJ starts the music instantly and lets the turntable catch up without affecting the sound. Serato stays true to what speed the platter is actually moving at. That’s just the difference between using controllers with platters that rotate and the one that don’t. DJs like myself that started on real turntables appreciate those little imperfections.

Thanks brother I appreciate that information. I started to get irritated and take it back because I thought something was wrong with the rane mk2. I started on controllers and thats what I was expecting it to do was kick right in.

Yeah, I've been hearing that myself.

hold pitch 8% and 16% only down....than the same movement... when you're back in the middle position push all 3 pitch knobs ;)

According to the RaneDJ forum the process is the same. I haven't had to do this to my MKII

I have tried this with my MKII’s without any luck.

hold pitch 8% and 16% only down....than the same movement... when you're back in the middle position push all 3 pitch knobs ;)

Steve Bennett I never got a chance to try Phase. I wish I could compare them.

@@logisticalstyles No problem....thanks anyway

LowLife Do you mean the spindle adapters?

logisticalstyles Yes, nobody has made a video on them yet!

I ended up selling mine because they would spin out of control even after Rane tried to fix it and sent me a new one.

@@logisticalstyles Waaaaw! Ok, I think better I bring it to Rane.

Definitely do it.

It was a gift. I don't know where they got it from but I've seen someone else with one as well.

ross mr switch to high torque

Tried that, no change

ross mr change the brake speed in the Serato settings to all grey

I wouldn't think so but if the decks don't lock in at the 0 point then that's a sign that hey need to be calibrated.

I didn’t have to re calibrate after the first time. I’m not sure if this is applicable to other controllers I only have done this with the Rane Rane Twelve. I got another brand new Twelve and didn’t have to do this.

How bad is the problem and is it the same exact problem? I recently came across a thread on the Serato forum where another issue with the pitch drifting has been acknowledged by a Serato rep. Interestingly enough there are pictures of an MKII version that Jazzy Jeff used during one of his live streams. Maybe they fixed that issues with the new model and hopefully they can apply the fix to our models.

AloneInFiction They also work with VDJ.

이호종 from what I’ve been hearing, no it does not.

hold pitch 8% and 16% only down....than the same movement... when you're back in the middle position push all 3 pitch knobs ;)

My MKII has been working perfectly so far. I saw on the Rane forum where a Rane employee told someone that this method should also work with the MKII. I have one MKI and one MKII. They are both matching up as far as the pitch is concerned.

@@logisticalstyles I tried it, it didn't work for the MKII model