Thanks for the video. So the steering remote next track and previous track doesn’t work? It requires the additional stalk?
@ishanperusinghe3 жыл бұрын
Not with android module . You need additional stalk . I can see why this is because it’s essentially running two operating systems and oem system is still the master . In the 10 .25 inch set the android is the master os and oem secondary so steering wheel buttons work for that
@Crazytown2 жыл бұрын
How much did it cost you?
@ishanperusinghe2 жыл бұрын
Links in description. Around 270 quid all in
@patelankit5173 жыл бұрын
Hey.I just want to know if the small dongle u connected to usb is the only devive we need, if not can u specify which device we need to buy.
@ishanperusinghe3 жыл бұрын
I had added links to my setup in description
@luisGonzalez-wb3mp2 жыл бұрын
Can I do this for 2013 Range Rover evoque
@ishanperusinghe2 жыл бұрын
Yep should be able to . Speak with seller on AliExpress. They will want a pic of dash . I believe 2013 still had bosch system
@IgorRaihlin3 жыл бұрын
Hi, thanks for the video, it was quite helpful. Can you please explain a bit about the stalk? Any Bluetooth remote control will do? Does it connect to the carplay unit or the phone?
@ishanperusinghe3 жыл бұрын
I looked at bluetooth ones but they had bad reviews. So I went to hardwired stalk ( see description ) it has two wires KEY 1 and KEY 2. these match up to ones coming out android box. You then use the inbuilt steering remote app to map buttons to what you want Eg forward track , pause Etc . you have to map twice. once for android unit and one in autokit.apk ( carplay ) settings. depending on what interface you are in the mapping will work as set. Hope this helps
@vishal53402 жыл бұрын
Hey can please send link for cable that u used or like thank u
@ishanperusinghe2 жыл бұрын
Which able? All parts used in install are in description
@tonymilligan40862 жыл бұрын
I have the exact setup but the carlinkit doesn’t work when plugged in 🤷♂️
@ishanperusinghe2 жыл бұрын
What you mean when you open the auto link app does it say box is connected
@tonymilligan40862 жыл бұрын
@@ishanperusinghe I’m using an Android phone so android auto connects automatically. As soon as I plug the carlinkit into the USB port a message on screen appears saying usb not supported .
@ishanperusinghe2 жыл бұрын
@@tonymilligan4086 so do have the same android box (car Navi )as me . If so try another USB port . USB not supported looks like a rom issue
@someplanes43213 жыл бұрын
How do you get android on the system to begin with ? The link for the car play unit says you need to have android installed on the car unit for both android auto and CarPlay. Is that correct ? Thanks
@ishanperusinghe3 жыл бұрын
In description there should be link to both items . Android module and carplay dongle
@someplanes43213 жыл бұрын
Ah thanks. Sorry me being thick. Have you buy the android unit and then the car link. Got you. Thanks
@jjbtheflyguy3 жыл бұрын
What if I don’t have nav
@ishanperusinghe3 жыл бұрын
I’m sure you just need the button . I would message the sellers in description and send them a picture of your dash . And mention you don’t have nav button . And let them know what button you have
@sarfarazshimul55683 жыл бұрын
Hi i Have land Rover discovery. Am from Birmingham. Can you setup on my car, i can come Down to your place if you can.my car 66 plate
@ishanperusinghe3 жыл бұрын
Sorry I don’t do installs . It’s not difficult . You can probably find someone in brum to do it