Raspberry Pi Tutorial (Model B+) - Using a Breadboard and LED’s

No video

Raspberry Pi Tutorial (Model B+) - Using a Breadboard and LED’s

Рет қаралды 52,871

5 жыл бұрын

Welcome to a new Raspberry Pi Tutorial series! This video will show how to turn on/off an LED using the pins on your raspberry pi model B+. Specifically we will use a breadboard, jumper wires, LED's and a raspberry pi model B+. We will start by creating a basic circuit using the 5V pin on our pi and then learn how to write code using python that can toggle the LED on/off for us.
Note: This should work for other versions of raspberry pi.
Playlist: • Raspberry Pi Tutorial ...
If you need the supplies you can get them from the kit down below! Or you can click the specific links.
Supply Kit (Everything you Need): www.amazon.ca/...
Jumper Wires: amzn.to/2WxlSsx
Bread Board:amzn.to/2WuWzYd
LED: amzn.to/2MQ1u1J
Resistor: amzn.to/2XyUneF
Raspberry Pi B+: amzn.to/2Wt0QeR
◾◾◾◾◾
💻 Enroll in The Fundamentals of Programming w/ Python
tech-with-tim.....
📸 Instagram: / tech_with_tim
🌎 Website techwithtim.net
📱 Twitter: / techwithtimm
⭐ Discord: / discord
📝 LinkedIn: / tim-rusci. .
📂 GitHub: github.com/tec...
🔊 Podcast: anchor.fm/tech...
💵 One-Time Donations: www.paypal.com....
💰 Patreon: / techwithtim
◾◾◾◾◾◾
⚡ Please leave a LIKE and SUBSCRIBE for more content! ⚡
Tags:
- Tech With Tim
- Raspberry Pi tutorial
- How to turn on/off led raspberry pi
- Raspberry pi model b+
- Python Tutorials

Пікірлер: 82

@TechWithTim 5 жыл бұрын

Hope you're all as excited for this one as I am :)

@tbm5k 5 жыл бұрын

Try making a smart mirror 🙌

@wanamir2497 5 жыл бұрын

Ur awesome.... Thx

@harshavardhanakrishnakommu2555 4 жыл бұрын

Can u make a video on raspberry pi set up

@lones-old-account 3 жыл бұрын

This vid was helpful thx!

@the_kid777 11 ай бұрын

Of course! I'm pretty sure I'm even more excited than you are!

@matiu7276 5 жыл бұрын

Damn, there is basically everything on your channel, many useful things, love that man.

@TechWithTim 5 жыл бұрын

;)

@pushpajitbiswas3752 5 жыл бұрын

I saw many videos, related this topic but the way of your explanation is awsome and you covered all the details about raspberry pi, gpio pins, breadboard, register. Really good job man I like it.

@stevebaryakovgindi Жыл бұрын

thanks, 3 years after, this was just what I needed, that the breadboard is a long row for power and short columns for putting stuff and to connect the GPIO into the power. That's what I wanted and that's what I got!

@raffy_rodriguez 4 жыл бұрын

i've been coding for years - this is the first time i've ever written code that affects the physical world

@devprakash5320 5 жыл бұрын

Actually I'm an electronics student and I used to hate raspberry pi , but u made it quite interesting for me ... Thanks

@Atharva_Vashist 3 жыл бұрын

You teach almost everything, Thank you for your wonderful tuitorials

@ambrose5728 3 жыл бұрын

Finally yes! I got my LED working and it was due to the problem with the library I was using. But you cleared this up. Thank you!

@bruskis8685 5 жыл бұрын

Thanks man! I look forward to more tutorials, I've had a pi for a few months but haven't been able to use it. This really helped!

@TechWithTim 5 жыл бұрын

Glad to see it helped!!

@trevormontgomery6795 5 жыл бұрын

Just got mine running today, impeccable timing

@alimihakeem841 10 ай бұрын

Thanks for this great content. It's really helpful

@kiravd5392 3 жыл бұрын

OMG, been looking for these sort of videos for a while. Thank you for this series!

@R3IMYSS 2 жыл бұрын

Congrats on the 1mil subs my man. :)

@shawngreene1 2 жыл бұрын

Thanks Tim. You've helped me build my first electrical circuit :)

@luisblum4416 2 жыл бұрын

thank you very much 😊

@propolipropoli 2 жыл бұрын

I love this video thanks

@ima9969 2 жыл бұрын

THANK YOU. I was super close to fry my pi 4

@luca-cj5nn 11 ай бұрын

Thanks a lot it's perfect ! Tried the 5V without the resistor and burned the led ahah

@JamesHertan 2 жыл бұрын

Thank you for the video. It was very helpful!

@MaddaloniBruno Жыл бұрын

Great video, thank you for taking the time to record that! 💯

@odinburk347 3 жыл бұрын

could you do the same things using java?

@giannismakarounas5966 5 жыл бұрын

You are getting updated so fast I realy like it

@ammaral-harazi1235 3 жыл бұрын

10:15 The resistor value was too high (generally a value between 220 - 250 is good) so its difficult to see the LED. Remember the more resistance the less current

@1377sv 4 жыл бұрын

Excellent video...thank you

@GameplayCrush 4 жыл бұрын

So if i understand your initial explanation of the rows correct, you don't actually have to put the resister in the same hole as the led right? just the same row. Thank you for making this video

@mdmarcaassport 3 жыл бұрын

good video. i encourage you to do more videos on your raspberry playlist

@avvn9331 5 жыл бұрын

Wow this is awesome sir, thank you..., thanks for making this easy to understand. This is exciting sir..

@abdulsalamaboubakar4059 5 жыл бұрын

Tim, check out the particle photon its really nice the way it uses wifi to flash ur code without the need to connect ur device back to the pc to update the code!!! looking forward for more vids like this good luck

@heidik1757 2 ай бұрын

Is there an upgrade raspberry pi model that is also compatible with this breadboard? Maybe another video link you can send me so I can get the newest and best? Thanks!

@zacharyjuhlke6541 5 жыл бұрын

Yay!!! I have been waiting for a raspberry pi series I've had one for about 6 months they are so cool!

@brodecoder8893 2 жыл бұрын

thanks

@lennoxreid4188 4 жыл бұрын

You should do a raspberry pi video on the RFID sensor

@nathanedwards3057 4 жыл бұрын

Great video man, new sub here 👋

@arjunsahlot Жыл бұрын

My light has 4 wires coming out of it. How do I wire that?

@paraglide01 5 жыл бұрын

Hi Tim, if you put your hand behind the object your camara will focus on the hand and the object.

@TechWithTim 5 жыл бұрын

Thanks!

@tudor-4222 5 жыл бұрын

Hey sorry for off topic as this is a video for raspberry but are you going to do a tutorial on the written digit recognition application on neural networks? Would be awesome

@ClaytonXL1 3 жыл бұрын

Is there any way to do this without using a male-to-male cable? I only have male-to-female. Asking regarding the thing you did in 9:28. Help is greatly appreciated

@hemitpatel4758 3 жыл бұрын

My birthday is in 2 months I have been coding for 3 years now and I am going to get the raspberry Pi to make a diy NAS can I use to that for this project too?

@depressedyouth 3 жыл бұрын

I didn't used resistor. My LED fused up

@ThreeDubs Жыл бұрын

10/10 niceeee

@davidm3210 2 жыл бұрын

Very nice, thank you. Can you recommend a manufacturer for a beginner breadboard, not too tiny for my middle-aged eyes?

@gitarmac Жыл бұрын

There are full size and half size depending on the number of pinholes. The holes and numbered rows are tiny regardless of the size of the breadboard. I have the same problem, I have a large square magnifying glass I use constantly and even then sometimes it's a challenge. I use large flat tip tweezers or needle nose pliers a lot to put those little wires in. Sometimes when my circuits don't work I get out the magnifying glass and find I'm a hole off. Hope this helps. :)

@lukehanak 4 жыл бұрын

Does this actually works with Raspberry Pi 4?

@MS-wr4xs 4 жыл бұрын

where can i find the pinout for raspberry pi model 3b+ (2017)

@xyaman425 5 жыл бұрын

Awesome!

@sainco3036 5 жыл бұрын

thanks.

@intellichicken144 4 жыл бұрын

Heed this man's warnings and use a resistor! I didn't and it burned out the light I had.

@trad3mark394 4 жыл бұрын

Would the TI breadboard pack work with the Pi

@bolics6560 2 жыл бұрын

Quick question will this work with a raspberry pi 4

@zelioz848 2 жыл бұрын

Usually you don't want to remove the resister. The resister is protecting the led from high voltage, if the current has too much voltage the led can burn out. You were only able to do it here because the led was able to handle the small current flowing through it. I'm only saying this because you were acting as if assuming people didn't know how electricy worked, so i don't want new people to try this with regular voltage on another project and fall into the same hole i did were i broke like 15 leds til i realized the importance of resisters. They limit the currents the led can handle it, any new people should look into ohm's law to know what value resister they should use.

@camaronruss9476 3 жыл бұрын

How do I get idle python?

@dev4life 5 жыл бұрын

can you make a video for the installation of raspbian OS?

@CurtisPurnell 4 жыл бұрын

Dev I doubt you still need this but it should come on the sd card with your RP. If not you can use an sd card reader and another computer to install it on the Sd card.

@tbm5k 5 жыл бұрын

Try making a smart mirror 🙌

@rajdave9862 5 жыл бұрын

omNS Bro, please reply to me. from where u learn this all module or library please tell me

@codingboy2254 4 жыл бұрын

bro you did a mistake , use said that the shorter leg of the LED should be connected to the ground or "Positive" , which is actually negative.....................

@gitarmac Жыл бұрын

I noticed that too.