Thanks Bert! Loving my RAW 420 after i finally got some bugs worked out. This one is in my sights for later this year.
@RC-Heli8355 ай бұрын
What an awesome looking little Heli!
@kaidok93143 ай бұрын
Hey Bert, Just got mine built and maidened. It flew awesome. No bobble or wags or anything, man what a great heli. I noticed right away how light it feels in the air and with the egodrift 3220 900kv it accelerates without a hesitation or bog. I have the Raw 420 DD and although it's a great heli, it really is not like this. I couldn't be happier. Now, one thing that did happen during the build was on the tail bell crank on the top tail pin, when i went to screw it in i heard a pop and it cracked the top. I took the one from my DD heli for now to complete it but that was weird. Also i noticed on the rear of the side frame at the top from page 10, mine has m2.5x8 socket head screws but when i saw yours it has counter sunk screws. I'm guessing mine is one of the first production units because i had the one-way bushing taped to the box. Over all though fantastic heli and i most definitely recommend. My setup: Egodrift 3220 900kv Torq servos HW 60a(moving to 80a because of KY heat) Pulse 2400 Spirit GT FBL RT blades 12 degrees of pitch linear running about 1850-1900 rpm in IU1 and 2100 in IU2 :)
@BertKammerer2 ай бұрын
Sorry I missed your comment. Glad to hear you're happy with it, indeed feels much lighter than the DD one. As for the counter sunk screws, mine is an actual prototype one, but yours is full production first batch. The only reason why there was an additional one way sleeve outside the box is because SAB realized the incorrect one was included in the kit after they had shipped to us, so we didn't want to go through the process of opening every single kit and resealing them because it would have delayed shipment.
@kaidok93142 ай бұрын
@@BertKammerer Thanks Bert, it's cool you actually followed up and checked comments. I amongst others do appreciate this.
@JustPlaneChris5 ай бұрын
There’s one question you didn’t answer, Bert: How do I convince my wife that I really need this?!? 😂
@BertKammerer5 ай бұрын
hahaha. If you're like me, you just need a lot of luck 🤣
@frisos39445 ай бұрын
Massaging it in gradually work for me sometimes 😉
@Golgafrinchamdent5 ай бұрын
I've never had a Goblin, but the little 420 looks great... very tempting. But I thought the Raw420 was direct drive?
@BertKammerer5 ай бұрын
This is a new 420 to be released in a few weeks. There is already a direct drive version of this.
@chnel.serabutan5 ай бұрын
Mantap bosku👍
@leetrevarthen5 ай бұрын
Hi Bert. I have an OG 420 Goblin running Pyro 380/09 motor and HW Platinum 100A ESC. Will I be able to make a direct swap to the Raw Comp? Cheers Lee
@BertKammerer5 ай бұрын
Yes. That motor has 920 kv, perfect with stock gearing. You can swap everything 😎. Now you just need to order the kit 😂 www.bkhobbies.com/products/raw-420-competition
@leetrevarthen5 ай бұрын
@@BertKammerer Would do if I wasn’t in Spain 😁👍
@axelminet10955 ай бұрын
Hello, is the motor: Scorpion HK-3226-900KV compatible with raw 420 competition?
@zoof14 ай бұрын
Does the kit have servo arms included
@BertKammerer4 ай бұрын
No it does not as different servos require different types of arms.
@zoof14 ай бұрын
@@BertKammerer Thanks Bert. Which ones did you use for the Thetas? The ones included with the servos maybe are too thin?
@BertKammerer4 ай бұрын
@@zoof1 The ones that come with the servos are ok, they work perfect, that is what I am using.