thank you.

Could u make a vid? I can't find the screw ur talikn about....

I know under the big black thing there’s a screw across the one he unscrewed your have to take the whole cover off and unscrew it and you can take it off!

palletjak jr There are four screws for the top cover by removing those four screws you’ll see two screws holding on the front end removing those two screws will allow you to pull the Front end off

Thx i was struggleing and was probably going to break it

@@rccincy I just broke it

keshon woods thanks

keshon woods try a stronger battery that fits so it will go faster

You’d have to take out the old one and make some room under the hood but BOU does it zoom

I used to have it but my steering motor burend so i returend it for this one but imma get it in the future

Nice i have both r34 and rxy i put in leds in R34

Wilbert Meaway 😂

Yeah still haven't figured out a good way to upgrade the tires. If they would've just gave us a better set a tires it would be a great rear wheel drive car all about the traction at this point until I figure out a mod it would be better to stay with all-wheel-drive

The nitro is kinda like a clutch kick

Np.👍

What do you think about mine? kzfaq.info/get/bejne/n7N8aKqglZ6qn6s.html

Is the battery or playtime a long time? I heard the play time is like 10 minutes?

@@Elyas700 it’s like 1 hour and a half for mine

@@cringeski4177 how the hell? Mines like 15 mins

Thanks soo much for commenting this. I had the same problem and it really helped me!!!

np. 👍

np 👍

What does the rear wheel drive mod really do? I’m a bit confused because I really don’t know the difference

@@xxvergeecoxx7801 So if we had proper traction which I plan on upgrading or modding the wheels the wheel wheel drive makes it easier to drift and more realistic and scale. It's fine drifting we're all wheel drive that's why the designer that way because the tires don't have that much traction we are working on a man and seeing what I can come up with but either way which ever way you prefer is fine

ty

nice

I got the rx7

@@txxmariioo nice

Same

@@miata-tg2nm nice

thanks. ✌️

@@rccincy the rear wheel drive mod does not work I tried but that is the only one that I undid it just won’t accelerate or anything

@@rccincy but all the other mods work

Where is the screw located

Where's the screw at ?

What screw???

@@rebeccathompson7230 towards the front of the car, unscrew every screw that holds the plastic cover that’s over the awd driveshaft, take the driveshaft out and put the cover back on, that should work😁

@@rebeccathompson7230 if it doesn’t let me know and I’ll take a look at mine

Thanks 👍

you typically can do it on a hobby grade car not this one it's when you adjust the angle and tow it the way you need it

@@rccincy i was just about to say that

No it's not you did something wrong

Don’t worry. It’s NOS 😂

That's a lot of work you need to post a video Of everything working and I'll share it.

Back in the days when people had to use pens and paper or landlines in the family kitchen to communicate I got tired of tyco rc cars being just one step behind hobby grade in the electrtonics and motor area ...so ide make trips to the hobby shop one upgrade at a time witch was 50 miles away and my family traveled every two weeks on Saturdays . I earned my allowance and was given 15 minutes to go in the hobby shop and buy my part ...so I would plan it out carefully ....what made it so hard was there was no internet I only had knowledge of hobby grade rc cars because I watched my uncle run his tamiya mud blaster a few times and took mental notes of how it was built so hit and miss factor was a bitch but within a summer I was able to mod the tyco bandits and hammer along with nikko rc cars to be cable of amazing speed ,run times prolonged , handling and way stronger ....mechanical speed controllers and recievers over a circuit boards, 370 motors , steel ball bearings over white plastic bus bushings inserts , servos over whatever that magnetic sorry steering box ...ball joints and adjustable control rods over wire bent and stuck in a plastic hole and of course oil dampend shocks , back then hobby grade rc cars usually had 4 double AA batteries to power the servos and a 7.2volt battery pack for the motor... Because tyco did not run full power to the motor it was cut down I think by almost half and 9.6 v battery's were the power and god forbid getting the circuit board wet one drop of water and smoke show with malfunction nervouse twitch type thing when you turn it on ....not repair friendly unless you were the aashole that came up with the design .... So ide fix all that nonsense because I could not afford a nice new mud blaster and I love rc anything . It's the same now to .my current rc is an exceed 1/10 brushed rally short course monster truck ....was brushed that is ....it's 3s brushless motor and esc and some other mods ...it cost 149.00 rtr. And ran at 23 mph......now it's at 210 dollars and it's all pavement lowered and grabs 53 mph if it can keep it's footing ......it will burn the tires sideways at 35 mph and go into drift mode .... I'm learning how to handle it. .. so buy a cheap rc and mod the fuck out of it .....amazon cheap. ..lol.

Back in the days when people had to use pens and paper or landlines in the family kitchen to communicate I got tired of tyco rc cars being just one step behind hobby grade in the electrtonics and motor area ...so ide make trips to the hobby shop one upgrade at a time

your welcome. ✌️

Referring to My dog yes

thanks

Thanks that means a lot

@@rccincy anytime, keep up the great work

👍

true

Thanks 👍

No problem my guy

thanks. 👍

RC Drones And More thanks

I love when that happens

Thanks I appreciate that. Got a love the 513

Yo make a video of this?

Yes, of course, you can mod anything

thanks

thanks

@@rccincy no problem

np your welcome And thanks for stopping by

ty.

all you need a connector that you can have made at most hobby shop if you can't make it and the battery and charger you just buy. or go to my channel and if you live in the usa mainland can win a car with 2 bodies adapter, voltage alarm, battery and charger. comes with free shipping But if do not live in usa mainland then you have a chance to win $20 Amazon gift card. you never know

I would love to do proportional steering but it would honestly require to change the receiver board the controller add a servo a bunch of rework it will literally be replacing 90% of the components in the car there be no point at that time and emails are just buy a hobby grade vehicle by the time you back to the cost and labor

Walllz Yeah definitely looks better lower

@@rccincy tried a custom roll on mine and messed them up 🤦‍♂️

Or you could always trim it a little bit make sure you make both sides of even though

You have to buy a cheap $10 soldering iron or if you're really good you can strip enough wire press it on there and hot glue it. its sucks Because there have been cars that came out of the box with those wires loose or disconnected so don't feel bad because they're honestly soldered really cheaply. A lot of guys a literally just got in the car and it would not work out of the box. I'm not the best one to do a soldering tutorial but I did do a video on how to repair the steering on the Jayda actually did a video on my channel.

Thanks for the sub!

don o driscoll under the big black cover there’s a. Screw across from it I screw that then u can do it

😂 thanks.

i'm sorry to hear that. I do have a revised mod list I did recently if you want to check those out.

It does my friend i have one same brand only different shell

ty

There's more screws under the middle cover take that off and you will see the other screws holding front on.

So if it's the same size as the other one they're all the same exact vehicle underneath just different bodies long is the same size. It's just a shell so they perform really well for a toy

GOLDBAT 3S 11.1V 3000mAh 30C Lipo Battery with Dean-Style T Connector and XT60 Connector for RC Car Airplane Helicopter Boat Drone FPV and Quadcopter Remote Control Toys www.amazon.com/dp/B07LGZ3TVM/ref=cm_sw_r_cp_api_glt_fabc_BRZ9GWMVY2HKBMNJBQ8J?_encoding=UTF8&psc=1

do you want at least 2200 ma-3000ma and the one I put all my time and tested was only a 30 C

if you buy cheap $10 hobby grade rubber wheels will actually fit on there but the problem is he won't be able to dress because I'll have too much crap it'll be more of a track car. Is it the plastic driveshaft or the metal one?

@@rccincy plastic

@@rccincy Ik I’m asking a lot of questions, but, what size tires should I get? Is 1/10 a size?

@@rccincy 4X RC Tires & Wheels Rims Sets Y Shaped Width:26mm 12mm Hex Drive Hub for 1/10 Scale On Road Touring Racing www.amazon.com/dp/B01MTSMNAZ/ref=cm_sw_r_cp_api_glc_fabc_UDgbGbSNP7AJ1 when I upgrade the battery, could I mod these on? Might be able to just screw them on

Watch the newest build series On my channel

it's 1/12 scale 1/10 scale bodies are to big

yeah I ended up going one up from where I was before but it doesn't hurt it too much long as you can still have the full turning radius in the wheels don't get slow down by the body.

No problem 👍

nice

Same

@@dieselduramax0955 nice

Nice

Can you put a link for the wheels? I've been trying to look for different options for this car on my channel and test different wheels

Ok the link is BQLZR 5 Spoke White Wheel Rim & Tyre Tires White+Black for RC 1:10 Drift Car & On Road Car Pack of 4

@@isntheleo9737 do they fit just like the original ones?

Did you like the wheels?

Hey do the battery’s last long for playtime?

Amazon.com banggood.com Local hobby shops and online hobby shops.

It'll be a little bit of work but it's definitely doable

Got it apart and thanks I'm going to stop up at hobby shop tomorrow. Def would be pretty badass! Connected 12t titan motor to it and it ran pretty fast especially when I hit turbo button. But it's way to big to fit in there.lol

Create a channel post it and then send me a link and I'll share it long as it's family friendly

You're welcome!

np 😉

I was looking to do a video on something around that price range maybe I'll look up a few products and get back with you

repent and have faith in Jesus alone He will save you

You should remove the entire top part I think the screw is under there it’s been a while since I’ve taken apart but I’m thinking of the same we’re just a different body

Rc Cincy thanks a lot I got it and also can u drop a link of some wheels that fit or body’s that they fit also this Quarantine with my son got me back into it lol

There is no new wheels or different rims you mean just comes with the 8 tires the 4 in the box and 4 on the car. I saw this video and i wanted to do to much to it but idk to much about electronics, so i just swapped the rims for a regular hobby grade rims and tires but i had to get new hardware due to them falling off. I also used thread lock to keep them in place it work after time the use wears the thread lock i will make a video about it!!!

yes 😂

The car is 1/12 scale so there's basically nothing out there That I could find

@@rccincy ok tysm bro god bless.🙏

Once I figure out the tires and get better traction I will remove the gears in the front that will free up the wheels to spin freely

I found that if the front screws are too tight they won't turn but that doesn't matter in AWD

I ll let you know soon

@-Xb_A1A7ツ 3s 30c lipo battery

If you had some Lexon body scissors it's easier but you're right without those I would definitely sand it. Just make sure you do a little at a time

in the end honestly there's only four organ mods for it. Battery mod, lights, Removing the bumpers and slamming the car. If you watch the most recent video on the Jada car it will show all this and I also have a video for repairing the steering.

Honestly I thought it was a 1/10 scale But is eight 1/12 and it's so much harder to find anybody for that

Unfortunately I went through several well mods and what they provide is the best for all wheel drive currently

I would say 1/12 scale

no i did a video how to do lights for 6 bucks plus a hot glue gun. its on my channel.

go to my channel and i have a few videos on it and mods

Honestly I would leave it all wheel drive because the tires that I went through all that trouble to upgrade it's just good for track not drifting. The best thing to do is to remove the front and back bumper to make it look better. Lower it a little bit and then do the bigger battery mode. that's what I recommend look on my channel for the last video I did on this particular car and it will show you all the mods .

True but in this case I've had it for close to two years and still hasn't crapped out. so far so good. That's why I always test at first and put it through the ringer

I honestly think it wouldn't be worth it. the cost and amount of work to do that would out weight the return.

Walmart.com or Amazon.com

sorry I didn't understand what you were saying. but looks like The last word is drift and I do have a video for that on my channel. ✌️ kzfaq.info/get/bejne/bdibf6uGq66bmnU.html

I've done 3 or 4 videos on this just go to my channel

I just very carefully removed the four screws off the cover then I removed two more on the front slid it out careful not to pull the steering wires out and remove the driveshaft straight out. Make sure you have some better tires or you'll have traction issues

You might want to use a screwdriver tip or something to push out the clip. I know some of those clips are harder than others depending which clip you got. My supra and my Mustang have totally different clips and the mustang one was really hard.

Buy an extra one for the shelf and Mod the other one either way enjoy the way you like

My fiancé was playing with My nephew. I can barely focus on one thing at a time.

It depends on your budget,,,,

@@rccincy what id i have a 70-100$ budget

Alex2.0T nice

I'm leaving out of town and won't be back till Monday so as soon as I do I will show you I did make a how to fix the steering video on my channel please watch it

Rc Cincy thanks!

@@accordmods np

Thanks