RCExplorer BICOPTER BUILD/setup video

  Рет қаралды 586,839

David Windestal

David Windestal

6 жыл бұрын

Update: Use this electronic schematic rather than the one shown in the video: rcexplorer.se/blog/2018/09/co...
Get your Bicopter here: rcexplorer.se/product/bicopte... or here: rcexplorer.se/product/bicopte...
Bicopter Electronics Kit used in this video:rcexplorer.se/product/bicopte...
Betaflight setup guide from Joshua Bardwell: • Betaflight 3.3 Ultimat...
Say hello to the RCExplorer Bicopter. Yes, Bi as in 2! This copter only uses 2 motors and 2 propellers to generate lift.
Pretty cool eh? But you don’t get much control with just 2 motors, you need something more; Servos! Pitch and yaw are controlled by tilting the motors in either the same or opposite direction
This makes the RCExplorer Bicopter look freaking fantastic flying around. In full forward flight with the motors at full tilt, it’s reminiscent of the V22 Osprey.
The RCExplorer Bicopter is designed to look as badass as possible, and I think we succeeded. The frame is entirely made from high-quality 3k twill weave matte finish carbon fiber. This makes the RCExplorer Bicopter frame lightweight, durable and worth drooling over.
Just picture yourself rolling up your flying buddies and pulling this thing out. Guaranteed instant +10 to street cred and coolness (guarantee not guaranteed).
The sharp-looking backend not only looks like a formidable stabbing weapon, it also makes the copter fly better. The weight is distributed more evenly and the leverage arm is longer, which should make the pitch axis more stable.
This thing is not like a crazy locked in quadcopter that obeys your every command. No, you have to fly this the way it wants to be flown. It is not easy and it will take some getting used to. Tuning is tricky, fiddly and might vary greatly depending on the electronics used (Pre-tuned starting PID’s available for the recommended electronics kit.). You can get yourself into weird situations very quickly and it currently doesn’t like flying backwards.
What it does like is forward flight (both slow and flat out), lazy turns and hovering (as long as it’s not drifting backwards). You can do tricks as well, but be ready for some fun recovery manoeuvres. It is a very different flying experience compared to most other crafts.
Building the RCExplorer Bicopter is also a bit of a challenge. Designed to be as cool looking as possible lead to some awkward spaces. Cable management skills will for sure make things easier, but you will probably still want to curse us a couple of times during the build.
RCExplorer.se - Exploring the RC world, one crash at a time.

Пікірлер: 429
@pmm4177
@pmm4177 6 жыл бұрын
The mad sweed just doesnt stop making awesome grown up toys! Love this guy!
@thiyaguramya7836
@thiyaguramya7836 5 жыл бұрын
Smash
@WarChest
@WarChest 6 жыл бұрын
I want to build this frame up just to look at it. Forget how it flies, it’s a work of art! 👊🏻
@cine_motard
@cine_motard 6 жыл бұрын
That frame is a work of art david! Like carbon fiber origami!
@mkdzr72
@mkdzr72 6 жыл бұрын
Another great product Dave came up with. Dude is smart. Thanks for the video!
@GrandadIsAnOldMan
@GrandadIsAnOldMan 6 жыл бұрын
Great build David, I enjoy your video style and your projects even though I have never progressed beyond toy quads.
@crucialfarmsurbanandfresh
@crucialfarmsurbanandfresh 6 жыл бұрын
Finally I've been waiting for a video for at least 3 years. 😂😂😂
@zero00tolerance
@zero00tolerance 6 жыл бұрын
He disappeared from the world grow a beard and back with a new drone.
@jonnyt1132
@jonnyt1132 6 жыл бұрын
A pioneer of rc models. Well done david! Keep up the awesome work!
@valiant360420
@valiant360420 5 жыл бұрын
David... as I went out to do a little flying today with my 5” quad, I was reminiscing on all your old videos, which are the ones that specifically sparked my dream of flying fpv. That Domain du Planet ( or whatever ), the funjet fpv flights out over the water looking sideways. Good times... Thank you David... and all the best to you. 🤓🤘🏼
@davidf2281
@davidf2281 6 жыл бұрын
Very, very cool. Well done on the design. I'd love to see another video about flying technique with this thing.
@whome7004
@whome7004 6 жыл бұрын
That's a wild looking two prop craft I look forward to seeing what that mind will do next!
@speedrag0n12
@speedrag0n12 6 жыл бұрын
This looks absolutely beautiful lad! Great job!
@Vijimn1
@Vijimn1 5 жыл бұрын
One of the Best drone building video I ever seen. Thank you Brother.
@redheron
@redheron 6 жыл бұрын
One of the most entertaining voice overs for a building have ever listened to 👉🏽🤟🏼 and I freakin love the little pointer dudes. 🤪
@rcpatapouf
@rcpatapouf 6 жыл бұрын
I love your mini hand 😂😂😂
@NavJordaan
@NavJordaan 4 жыл бұрын
I know right!
@TheBoatPirate
@TheBoatPirate 4 жыл бұрын
way better n a chopstick
@aerofpv2109
@aerofpv2109 5 жыл бұрын
Simply superb. Looking forward to your mono copter build someday mate. Cheers -Aero
@philmcgladdery1398
@philmcgladdery1398 3 жыл бұрын
Best build videos ever. Even the voice of reason sitting next to me doesn't complain.
@kensmith8832
@kensmith8832 5 жыл бұрын
Glad to see your time with Flite Test has not been wasted!
@potjnkye86
@potjnkye86 6 жыл бұрын
oh this is a must. just gotta wait for payday. Thanks david. i always love the odd ball multirotors
@Jake-pc4fd
@Jake-pc4fd 6 жыл бұрын
This is big. Mark my words, David, you are going to changes things in a big way.
@SamnissArandeen
@SamnissArandeen 5 жыл бұрын
The thing with tilting a rotor as a control input is that gyroscopic precession will also cause a roll force 90 degrees ahead in the blade rotation. The anticlockwise rotor will impart left roll when pitched forward, the clockwise rotor will impart right roll. In your current configuration, yaw left is accomplished by sending the right rotor forward and left rotor backward. The right rotor is the anticlockwise rotor, and the left the clockwise, so the craft will roll to the left while the rotors are being moved. This is cancelled by commanding a little roll right, but by slowing the right and speeding up the left, the dissymmetry of torque will yaw left - and this is continuous while the input is being held. In the video, you did say you were thinking about reversing rotor directions. I think that's worth playing around with. After all, with ACW on the left, commanding left roll will also yaw left with the dissymmetry of torque, and that's already the direction you're yawing to coordinate the turn.
@BMSWEB
@BMSWEB 6 жыл бұрын
Absolutely Insane build!! Love this so much.
@MrSmartiz77
@MrSmartiz77 6 жыл бұрын
I probably will never build that, but I really enjoyed watching this video !
@yersontorrescastillo1066
@yersontorrescastillo1066 5 жыл бұрын
Over all the little hands, really cool
@NavJordaan
@NavJordaan 4 жыл бұрын
Same
@AfterFiveMidnight
@AfterFiveMidnight 4 жыл бұрын
Great tutorial....good to see this out there so kids canplay with something other than video games, this teaches them. Excellent!
@tomrosch8690
@tomrosch8690 6 жыл бұрын
That looks so cool and it seems to fly not to bad. I remember seeing bicopter videos a few years ago and they flew terrible.
@Tyrivh
@Tyrivh 6 жыл бұрын
Mate thats an amazing work, I hope this subject will evolve even deeper because thats new and fresh. You're a pioneer so keep it going :D GJ!
@engineeredlifeform
@engineeredlifeform 6 жыл бұрын
LOVE the little rubber hands,... helps make the point, and are quite amusing. : -)
@eddyfpv652
@eddyfpv652 6 жыл бұрын
Awesome David you did it again
@davdaya
@davdaya 6 жыл бұрын
tis is a working crazy art.. bro.. u kill it.. cool !! keep it up..
@joshsimmons8178
@joshsimmons8178 Жыл бұрын
I remember my 1st tricopter I saw your 1st tri copter build and later updated mine. Sucks no one really talks about them anymore. planning on making my own v3 here in a bit .. 9 years later
@IanTanLK
@IanTanLK 5 жыл бұрын
Love those little helping hands...
@TheKumra
@TheKumra 6 жыл бұрын
yay a video, I missed ya! More rocket videos are needed :D
@iROMine
@iROMine 3 жыл бұрын
Well you did a goo job making it look as cool as possible!
@adamletchford4018
@adamletchford4018 6 жыл бұрын
That is the frakkin' coolest drone ever 😍
@dylanc2806
@dylanc2806 5 жыл бұрын
the mini hand is literally amazing, so is your advertisement style. "buy this thing"
@ColtonCampbell
@ColtonCampbell 6 жыл бұрын
Have you tried the Oblique Active Tilting method, where the arms angle in ~30deg or so? If i understand correctly this will give you more torque / moment to correct the pitch, and not just move the center of thrust
@johncarold
@johncarold 5 жыл бұрын
I seen you on RotoRiot ×with la drib and this is Great bicopter, Thanks for being nutty-enough to come up with this. JohnnyDRC
@RagicaltheUnhallowedKnight
@RagicaltheUnhallowedKnight 6 жыл бұрын
Would a Chinook design be an option as well? Because it has less weight on the sides, as such the servos don't have to compensate as hard? I mean I've seen those lumbering beasts in action and they are quite nimble for their huge size.
@Guide504
@Guide504 6 жыл бұрын
Great stuff Dave!! I am still waiting for the DW no prop levicopter, using 'clean outa this world flight' zeroth motor theory.
@yosayogi539
@yosayogi539 6 жыл бұрын
I love this idea. Wish I had one to test out. Lol thanks buddy for the vids
@cheif10thumbs
@cheif10thumbs 6 жыл бұрын
Hey Genius! Maybe you could invent some props that will quiet this beast down? Love your stuff Dave!
@briandoesathing3478
@briandoesathing3478 4 жыл бұрын
i love this so much. i want to take this and make a tinywhoop sized version!
@darkswami
@darkswami 6 жыл бұрын
Quick tip for everyone not knowing this: use nailclippers to trim zip-ties. They cut flush so you don't have that nasty piece of plastic with the razor sharp corners sticking out. Especially with the slightly bigger zip-ties. Keeps you from wondering where the bloody smudge on your model/workbench/tools comes from. Oh, and BTW: this is how ALL instruction videos should be! Nice!
@jae_tv2666
@jae_tv2666 5 жыл бұрын
Most detailed vids. Thank you for that bro...
@alecjahn
@alecjahn 6 жыл бұрын
Great looking Qua... Tr... Bicopter!
@CORINKERSTEN
@CORINKERSTEN 6 жыл бұрын
Awesomeness mate great build!!!!
@RCLoversan
@RCLoversan 6 жыл бұрын
Great tutorial, David!
@PESKII
@PESKII 6 жыл бұрын
the little hands tho!!!!! love it!!!
@galihargo6997
@galihargo6997 6 жыл бұрын
Been waiting for this one
@ashleycruz7730
@ashleycruz7730 5 жыл бұрын
so this Bi-copter will have more flight time compare to a Quad-copter using the same battery?
@videoleaks
@videoleaks 4 жыл бұрын
I love your channel and crafts.
@ddegn
@ddegn 5 жыл бұрын
I've finally decided to *GO CRAZY* after being told so many times not to by David. Bla waka waka bingo do finkle zedro beda day!
@alpha434
@alpha434 5 жыл бұрын
Hi Dave, have you tried running the two propeller assemblies in line longitudinally so that forward movement is throttle based without needing to rotate the servos against the counterweight? Stability and rotation would still be reliant on the servos.
@andrepacheco6067
@andrepacheco6067 6 жыл бұрын
Wow great video! And I learned something new today, carbon fiber is conductive? Holy crap!
@sergioreis3287
@sergioreis3287 5 жыл бұрын
I like the "hands". Nice idea.
@painJm1
@painJm1 5 жыл бұрын
that mini hand is awesome :)
@bragee
@bragee 5 жыл бұрын
This video is pretty damn well done. 👍
@marshalldog1074
@marshalldog1074 5 жыл бұрын
Do I need a separate receiver? (I bought the Kakute F4 v2)
@johngabrielherrera8687
@johngabrielherrera8687 5 жыл бұрын
Wow, that was the fastest small rc copter flight I've seen
@hanger9uk
@hanger9uk 6 жыл бұрын
Love those little hands!!!
@David__
@David__ 6 жыл бұрын
Thanks for sharing David!
@rjredd
@rjredd 5 жыл бұрын
could you fpv the bicopter, of cause the electronics can but would weight distribution be a factor to worry about?
@MadMarcWinnipeg
@MadMarcWinnipeg 6 жыл бұрын
Dude, sick video ! Those little hands just kill me. lmao !! Very cool bi-copter. I just subbed. ❤😊
@g.s.3389
@g.s.3389 5 жыл бұрын
absolutely amazing!!! great job 👍
@takoza5396
@takoza5396 6 жыл бұрын
wow that's so cool :O i was never interested in a Bi-copter but now i am ! :D i need a micro though
@kkrampus
@kkrampus 6 жыл бұрын
Do you have STLs for a 3D print version of the tilt? I know it won't be as good but I would love to make multiples of them easily
@DAKOROB
@DAKOROB 6 жыл бұрын
Do you think you can turn this into a tricopter by adding a tail prop..ad leaving the to tilt arms in the front for yaw.?!. I know it can be done but don't know how.
@gbresaleking
@gbresaleking 5 жыл бұрын
I've been telling myself and the wife I wont buy anymore quads and helis ... but no one said anything about a bi copter... man that thing is awesome ! I gotta have one
@hugodeanda
@hugodeanda 2 жыл бұрын
this little copter is RAD!
@SeriusSim
@SeriusSim 6 жыл бұрын
Looks awesome!
@indiantechnology261
@indiantechnology261 5 жыл бұрын
Awesome biycopter 👌👍
@slaupen
@slaupen 6 жыл бұрын
That looks awesome, need to get that in the future. Only needs FPV and gopro mount. And some LED lights :D
@South4everrwe
@South4everrwe 6 жыл бұрын
I love it. Great job.
@chintanvaghani2175
@chintanvaghani2175 6 жыл бұрын
Hi! Great! ! How to make bi copter for just standing an object in the air. Without any remote and as possible as small circuit, for just holding an object stable in the air where it put. Do you have any materials? Or can you help in this regard??
@flytechinnovation
@flytechinnovation 4 жыл бұрын
Which flightcontroller are you using?
@biohazardjackson63
@biohazardjackson63 5 жыл бұрын
David try soft mounted FC as an experiment also am I able to just use a foxeer f405 AIO for the baby tricopter? Cause it's all I'm willing to use for it
@harmoes7342
@harmoes7342 4 жыл бұрын
Hi David Building one but cant't find the pid setting in closed shop Could you please post them
@tiemanowo
@tiemanowo 6 жыл бұрын
I'm not sure if mounting a PDB directly on carbon-fiber plate is a good idea. It should have some spacers underneath. (except it is a single layer board. Is it?)
@CD-rt8wj
@CD-rt8wj 5 жыл бұрын
still the best outro animation on youtube
@yokesh159
@yokesh159 4 жыл бұрын
You deserve a biggg like dude
@Migueldeservantes
@Migueldeservantes 6 жыл бұрын
If cool is what you are looking for... perhaps you need to try and make a mock of the Terminator aircraft!! I mean in this moment you have the front head of it the rear end shouldn't be a challenge at all, and it will be something that most people recognize and remember about the movie!!
@cyberbruiser2515
@cyberbruiser2515 5 жыл бұрын
This is a fun build...cheers
@Bkzshen
@Bkzshen 6 жыл бұрын
I try to use the spracing f3 but after I copy the cli from website, my motor 2 don't have any response, after I take sometimes to make it work. But my servo cannot move. Under the beta flight motors the motors 3 and 4 are moving,but I plug my servo in,the servo doesn't move.
@CapApollo
@CapApollo 6 жыл бұрын
fantastic.... tip.. dont use the iron nuts include with this motors. use aluminum nuts.. they vibrate at certain speed.. i made a video about it.
@mongobaer
@mongobaer 6 жыл бұрын
you should think about doing something with the guys of flite test dude. you have some talent!
@masterdon3821
@masterdon3821 2 жыл бұрын
Yes. Bicopters are the future,as it becomes easier to make tilting parts. Osprey is unstable, because a lot of weight is outside the center of gravity. But something like a Chinook with wings and tilting propellers will be very stable
@excellenceinanimation960
@excellenceinanimation960 2 жыл бұрын
Im trying to make a custom bicopter but I cant figure out the mixing. How can I learn this?
@TonysRcTechboom
@TonysRcTechboom 6 жыл бұрын
Great video brother, good tips , liked and subbed you my friend well done 😀😁😀
@fmg337
@fmg337 5 жыл бұрын
i want to build a car/bicopter, any suggestions on how to go at it ? (was thinking of using an arduino and bicopter parts)
@jrayfpv4963
@jrayfpv4963 6 жыл бұрын
Dude it looks sooooooo cool! Do you plan to make it fpv?
@donsero5330
@donsero5330 5 жыл бұрын
Wow! That's awesome! Gimme this!😊
@SuicideNeil
@SuicideNeil 6 жыл бұрын
It's a baby Hunter-Killer drone...
@thomasrobson6370
@thomasrobson6370 6 жыл бұрын
it is about a HK, but he needs to mount some guns (or something) under the nose www.bing.com/images/search?q=T2+HK&FORM=HDRSC2
@SuicideNeil
@SuicideNeil 6 жыл бұрын
That won't make the government(s) want to ban drones even more than they already do, for sure. Lol. If he builds a larger version then mounting an airsoft gun or nerf blaster would be fun though...
@ramudukuruva3268
@ramudukuruva3268 5 жыл бұрын
Why don't you build custom body like the avatar helicopter
@bayuizzy690
@bayuizzy690 5 жыл бұрын
you know what... you explaint it very clear.. thanks.. you good.. 👍👍👍
@GeorgeTsiros
@GeorgeTsiros 6 жыл бұрын
how's the efficiency compared to a similar weight quad? it should be better, i expect
@BenHickok
@BenHickok 6 жыл бұрын
The frame design really is great. Not sure how the video has any dislikes.
@aliboy7320
@aliboy7320 5 жыл бұрын
Awesome job Sir soo cool love it 😘😁😍
@marcusmckay8120
@marcusmckay8120 6 жыл бұрын
Curious why dont you do a tri copter with the bi copter front motors so all 3 motors move and see hoyw that fly
@rizzler05
@rizzler05 5 жыл бұрын
Great video. Where can I buy something like that? Is it expensive?
@Chamorristaxd
@Chamorristaxd 4 жыл бұрын
Hello everybody, I wanted to ask how can you control YAW in a BICOPTER without tilting the rotors? Id appreciate brainstorming and examples. Thank you
@Jim0i0
@Jim0i0 6 жыл бұрын
You are awesome.
Bi-Copter!? (and Tricopter!) with David Windestål
13:18
Rotor Riot
Рет қаралды 1 МЛН
39kgのガリガリが踊る絵文字ダンス/39kg boney emoji dance#dance #ダンス #にんげんっていいな
00:16
💀Skeleton Ninja🥷【にんげんっていいなチャンネル】
Рет қаралды 8 МЛН
Summer shower by Secret Vlog
00:17
Secret Vlog
Рет қаралды 12 МЛН
Drone Helicopter Hybrid
9:01
Tom Stanton
Рет қаралды 3,6 МЛН
HYDRAULIC PRESS VS ARMOR, USA AND RUSSIA
10:16
Crazy Hydraulic Press
Рет қаралды 597 М.
How to make induction stove. Great idea needed in your home
12:13
D. Creative
Рет қаралды 1,4 МЛН
Bladeless Drone: First Flight
5:49
Stefano Rivellini
Рет қаралды 3,3 МЛН
The BICOPTER - TERMINATOR inspired RC Copter - only 2 motors?
5:51
David Windestal
Рет қаралды 73 М.
How to turn a DJI MAVIC into an FPV DRONE!
15:46
TMS Productions
Рет қаралды 186 М.
The Spinning Drone Paradox - Part 1
8:44
Nicholas Rehm
Рет қаралды 2,2 МЛН
RC Electronics for Noobs
5:45
Samm Sheperd
Рет қаралды 1,7 МЛН
$15 Drone Build within 24 Hour - Challenge
12:01
DD ElectroTech
Рет қаралды 3,5 МЛН
ВАЖНО! Не проверяйте на своем iPhone после установки на экран!
0:19
ГЛАЗУРЬ СТЕКЛО для iPhone и аксессуары OTU
Рет қаралды 6 МЛН
iPhone 15 Pro в реальной жизни
24:07
HUDAKOV
Рет қаралды 467 М.
Самые крутые школьные гаджеты
0:49