Thank you to BetterHelp for sponsoring this video! If you think you might benefit from therapy, visit betterhelp.com/rcgirl for 10% off your first month of BetterHelp.
@kirkslayden8347 ай бұрын
You said something about leaving a 9-year relationship well what happened to me is my wife of 26 years was freed like a french fry to death by the doctors radiation and St Mary's hospital which is now Providence denied her healthcare two times the third time I took her less than a month she went brain-dead on 718 2020 and the doctors were telling me she's gone you're just keeping her alive on the machine so I told him to pull the plug on 722 2020 and she passed on at 1534 and that was the 10th year that we paid off for house and I love RC cars planes and helicopters and I have a massive amount of static models of all sorts I've been collecting them for a few years but not anymore I have suffered from depression for many years and this happening to me has been really hard but I'm trying to stay happy God bless
@kirkslayden8347 ай бұрын
This printer would be great for miniature houses making furniture in different types of things
@kirkslayden8347 ай бұрын
I just bought a 3700 electric bicycle it's called Ariel Rider it's got big fat tires it's so cool 😎 and I had to get it because the DMV took my driver's license from me because my vision is not so good and United healthcare is the worst ever healthcare and there's a reason why things are so messed up in the healthcare industry so I'm retired and I got to depend on them which is a joke
@smoothrc287 ай бұрын
@@kirkslayden834 I’m really sorry to hear what you and your wife went through. I went a very similar story. I started to type it but it’s too long. I was with her from age 19 years old when I met her. Married at 26 years old divorced at 57 years. Total of 40 years together. Together almost everyday for years. I was going through depression probably 10 years before that. With no support from her. I started to get into rc at 21. Raced oval carpet indoors for years. Then it died out and got into crawling and everything else RC Trying to help my depression. So I was loaded with RCs and still to this day. Very long story short!! She filed for divorce. Was not expecting it. No big fight. Never treated her bad. Total opposite she treated me bad. Had lost my job of 20yrs. Paid pretty good. But not as much as her. I had bad luck getting a good job. Lost some but she never believed my reason. Tried my own business. Had work couldn’t find help. She kept degrading me and sucked Out any confidence I had left. Sorry getting long again. So we got divorced and in the agreement it said I was never going to see her again. NO CONTACT. When I read that it really hit me and hurt. After the divorce there was nothing not even a hug goodbye. I lost my house and man cave. Built a Koi Pond in the back and a started a rock crawling course. Moved in with my mother. In her basement with tons of RCs. Then about a year and a half. She passed away. Lost her house. Had a big fight with my two sisters and their grown up kids. Was homeless for a while. Finally found a very overpriced apartment. Had to stuff all my rc stuff into it. Wasn’t into it either for a while. Just started getting back into it. Because of major depression suicidal. She didn’t die but it feels the same. Plus have no family and totally alone. Without rc. I probably would have done something bad to myself or someone else. So keep working on your RCs. It really helps take your mind off other stuff. So sorry this is still so long!! Just hang in there 👍👍🙏🙏🙏
@smoothrc287 ай бұрын
@@kirkslayden834Also are you from Rhode Island?? If you are so am i Johnston RI. Problems with same insurance!! lol !!
@johnb46892 ай бұрын
One tip I want to give is to layer in 0.4mm increments. Your printer head prints in 0.4mm and stepper motors follow that (also 0.4mm). So don't use 1.0, but go with 0.4, 0.8, 1.2, 1.6 etc. It creates much better prints and increases the speed ;)
@cnsapam7 ай бұрын
I bought this printer about a month back as my first printer. Am completely new to 3D printing. But for beginner on budget this printer takes the cake 🎂. Absolutely loved thus printer.
@briankale59777 ай бұрын
I am sorry you got duped 😢 So many better alternatives that don't pay for reviews after stealing IP of successful machines while having 0 QA. etc
@cnsapam7 ай бұрын
@@briankale5977 there are only few brand available at my place, so there is not much to choose from anyways. :)
@kensmith56946 ай бұрын
@@cnsapam I think your choice was a very good one. The printer works for you. You found it easy. Ignore the negatives
@cnsapam6 ай бұрын
@@kensmith5694 thanks for the encouragement. Using the default CA Hyper PLA profile and by changing only 3 parameters I was able to achieve functional accurate and perfect print using a sub $10 filament which require minimal to no sanding requirement. (I had to only change the speed to 150mm, Pressure Advance to 0.1 from 0.4 and max volume speed from 27 to 22).
@QuinnsRC7 ай бұрын
Sorry you’re going through tough stuff. My wife’s a psychologist and I’m glad you are putting yourself out there to take some stigma out of getting mental health help. Best to you, I’m sure your move will be exciting and scary. Can’t wait to see where you’re going and what it’ll bring to the channel. You’re doing a great job. Hang in there. All the best! Now I’ve watched and what a great primer! I know nothing about 3D printing but definitely want to get into it soon.
@wordreet7 ай бұрын
My tip for 3D printing parts for RC is to try a slightly higher temperature and slower print feed. And when fixing holes print undersize, do not use a drill to make then bigger, use a reamer, because it doesn't stress the material nearly so much and won't snatch into the sides. If you only have a drill, hold the part firmly and spin the drill backwards as you slowly push it into the hole.
@kensmith56946 ай бұрын
Yes. and keep drafts off the printer.
@jebrc6 ай бұрын
Sorry to hear that but i did it after 19 years and its hard but any bad situation we go through we come out the other end of it a stronger wiser person. You hot this girl i been a fan of the channel a long time now not to many beautiful ladies doing rc so caught my attention and im glad it did your channel is great and super informative so thank you for all you do
@AndrewAHayes7 ай бұрын
The catch is that it is a Creality product, they release their printers when they are in the beta stage and rely on the community to fix the faults, or in their K series printers keep coming up with revisions of parts until one actually works correctly. With any newly released 3D printer I would advise potential purchasers to wait 3-6 months to enable the community to figure out what is wrong with the printer as there always is a problem somewhere
@charlieross-BRM4 ай бұрын
This presentation is probably the best demonstration of this model that I've seen. It "put me in the driver's seat" about assembly and operation as well as possible short of actually having the unit. I probably will be ordering one by mid May. I've been on and off using a tiny original Ender (150mm x 150mm) for years; the cheapest way in 2017 to see if 3D printing is a thing for me.
@outcastrc80527 ай бұрын
Thanks for being real! We will be praying for you and trusting that you will have brighter days ahead!! All the best on your move and may you find peace and joy in the transition!!💝😇🙏
@vicferrarisgarage5 ай бұрын
Being older (55). I have found that we try to hold on. BUT we walk away from the bad and that is for the good! Don’t try to make it make sense, just know you changed for the better tomorrow and tomorrow is today’s yesterday! ❤ 😊
@crssbo46457 ай бұрын
I'm sorry to hear of your current situation. You are a cheerful, radiant nature and I am sure things will get better. I'm an early millennial and in the last few years lots of peers "confessed" that they have issues, negative thoughts, unhealthy habits and so on. Which makes me feel better because I'm in the same boat lol. RC and 3d printsling saved my sanity quite often lol. And I'm even debating whether to buy the KE or bambulab A1. Thanks for this great video 🤗
@RCGirl7 ай бұрын
Thank you. Yeah it's part of life and we are very good at hiding behind the "glossy" stuff we share on social media. I've also been eyeing the Bamboo lab printers. Have heard great things and people in the RC hobby seem to really like them.
@CoreyStup7 ай бұрын
I have an A1 already and a KE is arriving Monday. I'm curious to see how they compare! The Bambu products are super polished.
@crssbo46457 ай бұрын
I'm at a point where I say "screw it, I'll wait". Seems like this new generation of high speed printers started a huge flood of new models every few weeks. And then they are sold out, haha. And I hope Hayley didn't regret opening up to us. From experience, I know that letting your guard down every now and then can be relieving 😊
@waynoo7746 ай бұрын
We all hide things and we should not, let’s put our life’s out there so we can help people in the same situations, we all need help so don’t be afraid of asking for it ❤
@sci-fimodeler1701Ай бұрын
I got mine 2 months ago and it is a printing beast! I had it running non stop for the 1st 6 weeks and nice results and works great!
@supranomicon7 ай бұрын
Sorry to hear of your situation, and hopefully you will move on and find happiness again, thanks for your channel and content, really appreciated!
@RCGirl7 ай бұрын
thank you!! kind of scary to share with strangers on the internet but that's life!
@arnhaldhalvorsen72237 ай бұрын
Love your enthusiasm for the hobbies. You have one of the most in-depth channels and a beautiful spirit! And cant wait to get my decals on my Scout ll. Best of luck on your journey.
@mikefly5624 ай бұрын
So sorry to hear about you going through tough times. It so important to be able to talk to someone when in need. I grew up in a home where my mom (now retired) was a psychiatrist and psychologist and worked with many people over a long career. She always explained to me growing up about the importance of talking to someone close or to a professional when help is needed. We are all human and no one is perfect and the importance of being able to talk is so important. I really love your channel and I consider you one of the best RC reviewers on KZfaq. I've been following you on KZfaq for many years and really enjoy your content. I also just got into 3D printing as well and enjoying your 3D printing videos. I hope everything goes well, and remember to take time for yourself as well, and thank you so much for everything you do.
@bencleveland58677 ай бұрын
I have watched a ton of your awesome content but have never commented. I wanted to say i really appreciate you being vulnerable. Im impressed. Keep up the great RC content and good luck.
@RCGirl7 ай бұрын
thanks for your kind message! ❤
@matty82727 ай бұрын
Best wishes in your new adventure. Thank you for the work you put into these videos.
@markrusk28707 ай бұрын
Good for you to have the courage to prioritize yourself and put your personal life out there to get help. I’ve been following you for about a year now and find your mature approach to real life and RC refreshing. Keep going and chin up.
@bigeyefpv7 ай бұрын
You're so strong to share something like with us. You're a beast. Keep doing what makes u happy, and it's good to talk about this kind of stuff to clear your mind and soul
@echobeefpv85307 ай бұрын
Hoping better things are on the way for you. As for the 3D printer, I'm still using an original Ender 3 that I have fully upgraded. I've learned so much this way, though it has cost a lot more. I've had it for about 3 - 4 years now, and I still use it all the time for hobby stuff, etc. The feature list VS price point on this model looks pretty great ! As for software, etc. , someone will have more options out very quickly, as this is going to sell well.
@surfacepro551921 күн бұрын
Great video and walkthrough ! Thank you for doing this. I think I might just take the plunge and try this as my first 3d Printer. I noticed that you hadn't pushed for a subscribe, and along with your honestly and integrity, I think you deserve it. So, I am now subscribed to your channel. Cheers .
@hikeaphoto7466 ай бұрын
Too funny to see you doing 3D printer now. My wife has one and loves it, she makes a lot but, she not yet done any for my RC cars stuff needed. I did not use my RC cars last year, I got into eBike. Now into indoor plants. That was good what you had done so far with 3D printing. Amazon what ones make now. Good to see you back from me doing RC. Thanks!
@wordreet7 ай бұрын
Argh! Don't remind me about my Ender5 sitting over there that started failing every print! What it did prove to me is that I don't actually need a 3d printer, as I haven't touched it in almost 2 years.
@LehtusBphree2flyFPV6 ай бұрын
Thank you for the information about better help. I currently go to mental health myself and bring into FPV and 3D printing it keeps me happier in life when everything else seems to bring me down. But good therapy is what I do love going to and taking out my feelings. Thank you for this video you got my sub. I look forward to seeing more of what you have to offer. RC & FPV 4 LIFE
@CoreyStup7 ай бұрын
My V3 KE arrives on Monday. Helpful content for anyone getting a new printer especially this model! thanks!
@RCGirl7 ай бұрын
Very cool, let me know how you like it!
@DavidPalazzolo-pe2dy2 ай бұрын
I purchased my Ender 3 KE about 3 months ago. Has worked great for me. I have had some beautiful prints from this. My only down side is that the company is based out of China. Their support is in China. Communication with support is via e-mail on China time, which means they reply around 2:30AM Eastern Time. Should you need parts, they will need to be shipped from China. I started getting a key:2094 unknown error which is being caused by the auto leveler. I have been down for a couple weeks now and will remain down until the part arrives 2 weeks from now. Don't get me wrong, this has been a fantastic printer but support is also a factor.
@mikehensley783 ай бұрын
Thank you for making this video. I just got an E3 V3 KE and it is my first 3D printer. You answered all the questions i had and taught me a lot i didn't know i needed to know. I recently got out of an 8 year relationship too. IT SUCKED! If i could make a video to help you i would do that. I would probably have to watch another video to learn how to make a video though. :) Thanks again!
@GhostH2o6 ай бұрын
Sorry for what your going through those are life lessons you get stronger as you I hope you stay focused and keep rc alive
@Yan70019787 ай бұрын
Great video! I'm new in 3d printing and this video really help me to understand that world! With A.I. these will progress really fast for sure. I wish you the best for the year to come. Keep mountain biking with your crawlers and don't be too hard on yourself. Let your life find its flow.🚵♀️
@GTARC-20237 ай бұрын
I've dipped in and out of depression for years. Whenever I get out my RC's I'm very happy! Keep up the great content and thank you for your candidness. Wish you well for the future!
@HeidiWild-sr3to7 ай бұрын
RC Girl! I love your videos and content! Your videos have helped me many times with build kits as well as items to buy or not buy! Appreciate your time and knowledge and excitement of the sport. Cheers from Alaska!!
@cadbuildflyrc37846 ай бұрын
It is funny a few years ago, I had never heard of 3D printing, now I can not live without it.
@danweiss13717 ай бұрын
I enjoy your channel from time to time. Everything you post is entertaining just don’t have enough time to watch videos. I’m sorry to hear you’re going through a stressful time. Just know you’re strong and you can recover from this. And the 3-D printer is my next big RC purchase
@rexwalker69627 ай бұрын
So glad you keep moving forward!! All of your content is so balanced between Professional and Real! Thank You ! Thank You ! Thank You !!
@user-2df90a0z17 ай бұрын
Talking about your mental health really helps you get things off your chest and realize you're not alone. As someone who has constantly gone through dramatic life changes their whole life.... it took me years and I waited to the point where I'd had completely broken down and my health deteriorated dramatically to get help. I wished I would have gotten it sooner but I'm a bit hard headed. 😅 But I saved my most of my hair from falling off lmao! Keep your head up... Things will get better... Time heals all wounds.
@normundsdrznx7 ай бұрын
Tip. You can drag and drop gcode file to Creality Print sliced in Cure and send via wifi to printer.
@3DRC-printing-and-design7 ай бұрын
You are not alone. There are a lot of us that are in the same position. I am a veteran from the army and a normally big, tough guy however, I have found comfort in counseling.
@Waltkat3 ай бұрын
I don't think you'll have any problems finding someone else when you're ready. Enjoy this new adventure in your life. As far as 3D printing in concerned, I've been printing for about ten years and am still using my first 3D printer, a Creality Ender 3, first generation. I've made a few modifications to it since then but even from new it printed great with the only issue being a failed filament feeder due to it being made of plastic. Even though, it took a year before it broke. I now have 8 printers (FDM and resin) in addition to the Ender. I'm also a long time RCer and make lots of stuff for my crawlers and boats. I also made a much needed accessory for my Vitamix. Lol. Enjoy life.
@ximetcarbonell27336 ай бұрын
Mucha suerte con tu nueva vida RCgirl Una ruptura nunca es agradable y menos de 9 años de relación. El RC es un buen refugio, y darte vueltas con la mtb también. Saludos desde España!!
@AlexWienold-so1uo7 ай бұрын
Rc girl you are amazing. Love your show thanks and keep it up. From Jacksonville Florida.
@BennyTygohome5 ай бұрын
I just got into 3D printing a few months ago and already have two printers. I consider myself a professional now 😂. I'm not really a professional. But i am loving the 3d printing. Endless possibilities
@3DJapan6 ай бұрын
I love mine. It's so fast, wireless, and easy to use.
@felixdahousecat53317 ай бұрын
Thats a huge commitment. You'll be ok with time, stay strong fall in love with a new beginning ❤
@randysmith85157 ай бұрын
Thank you for being vulnerable and sharing a bit of yourself with us. You are a strong young lady. It will take some time to heal. Take one day at a time. I enjoy you and your channel and the RC hobby. Thank you for sharing some things regarding this 3D printer. Hugs 🤗.
@skeetarus2 ай бұрын
Thank you for normalising therapy! It’s a basic human need to have good mental health. Thank you also for this great review, I’m about to order the KE as an upgrade from V2 Neo and I can’t wait for the slick prints and faster speeds! I haven’t seen anyone else show the set up, thank you for doing that. I’m so excited for full auto bed levelling and auto Z-height, that will save so many headaches! Some of your RC accessories don’t even look 3D printed. Love the video, thank you.
@MrDiMaggio55 ай бұрын
Also - try tree supports next time, print really fast and super easy to remove!
@jasongooden9175 ай бұрын
Canada and Mexico are also 115-120 volts.. We share the same grid
@ketlee39407 ай бұрын
I'm sorry to hear of your current situation. Just dont think too much ok . We all love you , and love the video u make for us. Stay strong . And thanks for making this wonderful for us .
@MrAnderson27447 ай бұрын
You have our support, you got this, and I have also got me my first 3d printer making things for my rc cars
@shaunewing89736 ай бұрын
so glad your looking for support . im in the same state of heart as well. i feel ya
@donaldcarter12067 ай бұрын
I bought my KE 3 weeks ago. Upgraded from a s1 pro. Liking it so far.
@RCGirl7 ай бұрын
Oh awesome, yeah honestly really happy with mine. I'm actually leaving the more expensive Ender 5 S1 and sonic behind for MtnMyke in the move and taking this one with me because it's so good, compact, and easy to use. 👌🏼
@MrDiMaggio55 ай бұрын
Not sure what slicer you're using but start learning Orca Slicer (its free and open source). I've been using Cura since getting my first printer 2 years ago. Just learned about Orca and there is so much you can do in the slicer for RC. Like taking 2 different model and mashing them together, adding more shapes, filiment profiles. Yes Cura has some of the features but I find Orca so much more intuitive...plus if you move away from Creality, it supports a ton of different printers.
@stacygardner79597 ай бұрын
I'm so sorry RC girl about your separation keep your head up, moving forward, and talk about things that bother you ❤
@augieschultz25305 ай бұрын
Well done video. Very interesting for a guy with zero 3D printing knowledge. Good luck on your future.
@williamray80007 ай бұрын
Super cool...I have used my son's Ender printer that came out about 2 years ago and kinda got frustrated with things not turning out very well but this model seems to be able to cure all of that. Thanks too for sharing your life challenges. I am going to check out the link to see if it would be a good fit for my own challenges. Take care and stay busy, stay positive!
@brianmorrison28467 ай бұрын
I’m sold on this printer thanks for the suggestion
@SouthFLRCCrawlers6 ай бұрын
been looking to upgrade my ender 3 pro, thanks for your review!!
@owenscott77757 ай бұрын
Stay strong lady! You got this! Onwards and upwards! 🏴
@Osrszombie5 ай бұрын
Rc and 3d printing ❤❤❤❤❤ My favourite hobbies together ❤️
@jdadventures96685 ай бұрын
RC Girl, was only looking for information on the KE version of the printer (and thanks for that information), but you talking about where you are and needing help was amazing. Good luck with your journey and mental health is SO IMPORTANT, and understanding how to deal with things is important. Thanks for the video!!!!
@123dorsoduro1236 ай бұрын
Forget therapy, Come visit us in sunny Scotland! Natural therapy!
@hooligantimes91327 ай бұрын
I'm winning, and I don't intend on losing again!
@ryand47867 ай бұрын
Thanks for sharing even though you don’t need to. 9 years is a long time , it does get better , keep doing what you’re doing, keep up the great content !! 👍
@edwardranno71197 ай бұрын
Great video,now I have a basic idea on how to 3D print
@slinginlead83536 ай бұрын
I use a elegoo resin printer for doing lost wax casting for jewelry.. never really tried Rc parts but I’ve done 2mm diamond mounts and it was great
@stananderton68826 ай бұрын
Thank you for being brave and putting yourself out there. Enjoyed your video!
@emmanuelskolinos13617 ай бұрын
a good choice the KE is a beast of a printer for under 300 and you get 1.Klipper.2 speed 3 and most important (open sorce)
@aguyinnc28657 ай бұрын
Thanks Hayley, this looks very cool. Life always has ups and downs, wishing good things for you moving forward. Your fans support you. And if you happen to scratch anything, well that okay with me! LOL!😁
@elus896 ай бұрын
Hi RC Girl, First time watcher here and fairly new to 3D printing (though I have been researching it for years). The KE is my first printer and while my experience is similar to yours, everyone has different quirks (I think yours is a later batch and has the least of those so far). My auto bed level works fine in the centre of the bed (with a minor lowering of the Z-offset), but on the edges it is out too far and sometimes my print fails if I use the whole bed or fill it to the edge with copies. I will probably need to use spacers and tape to get it right. A few pointers: 1 . I noticed that when you were on Creality Print, you had the setting of 100% infill density. But if you looked at the g-code breakdown in Preview, there was zero allocation to infill. This is due to the bizarre way that Creality treats infill. You are better off setting it to something like 30 but then pretend you didn't set it all. This is because to adjust the infill amount, you have to go to the setting below, infill distance. In order to increase the infill you make this setting lower and vice versa. It's right in Creality's Wiki, but it's completely non-intuitive. This is why I advise abandoning Creality Print and instead use Orca Slicer. It's a derivative of Prusa/Bambu. It has a lot of good presets, you can use wireless printing (though it's not perfectly integrated) and the support and infill settings are much easier to work with. 2. This leads to my 2nd point. You can use wireless printing without Creality Print, it's just one extra step. There is a webpage GUI that you can access through any browser (including mobile phone) by just typing in the IP address that your printer has been assigned via DHCP. To get from your slicer to the point of using the web gui, you just need to export the g-code. Then you go to the web gui, press import in the window with the list of files on your printer, then you can select that file and choose print. This is a touch buggy though, so sometimes you still have to go to your touchscreen and select the print from there. It works 8/10 times though and you shouldn't be too far away from your printer when starting a print anyways. 3. Orca Slicer actually has a tab for the web gui that you can use as soon as you've registered your IP with the software. So IMHO, it is currently the best slicer to use with the KE. 4. You can root the KE either with Creality's latest firmware or destinal of D3vil Design's patch. Then you can use the wireless print option from any slicer that works with Klipper. You can also change the config file from here, install Mainsail, Fluid, Kamp, KlipperScreen, Moonraker, Guppyscreen, etc. GuppyScreen works in landscape on the KE touchscreen (Nebula Pad) and has a lot more options than Creality's default interface. Happy Printing!
@legendaryboss65444 ай бұрын
is there a way to print colorful objects using different filament colors with this printer?
@SoundRelaxus6 ай бұрын
This is just cool my friend 🧡. I am thinking about getting one in the near future. Thank you for sharing this with us ❤❤
@billwiththeb6 ай бұрын
Stay strong girlie,you have done more than most be proud of that.
@christalbott84467 ай бұрын
Great video! Keep up the great content! Keep your head up an keep moving in a positive way! Just changed companys today because was not happy working their for the last two years! Let's all keep positive!!!!
@swells17 ай бұрын
Looking at 3D printers and this was helpful. Thanks!
@outdoororiginal43646 ай бұрын
So sorry to hear the news. I have been there myself …. Mine left after 24yrs of marriage. But, God blessed me even bigger several years later far greater than I could imagine. Keep moving forward and love the channel. God bless ma’am.
@farhadkhorasanee80396 ай бұрын
Thanks for being so brave to talk about yourself.
@denalijordan2 ай бұрын
love your content from nz, picked up one of these and it works perfect and Im tempted to try print a chassis or to just for fun 😂😂
@b3n5chn31d3r4 ай бұрын
Temps were too high. 200 for the print head and 65 for the bed produces the best results with PLA!
@A1948C5 ай бұрын
You are strong! And you will always be! That's your blueprint! Don't worry about! Time will solve everything! God bless you!🤗
@ThreeDigital5 ай бұрын
Guessing KE is in a competition with AtomStack Cambrian. Interesting shocked with TPU. Does KE work well with TPR? So awesome see this one
@WOLFTRAXRC5 ай бұрын
Now... I know what to use my gopro 10 black for HAHAHA 💥💥💥
@paulmftiАй бұрын
Thanks for being so vulnerable...we love you and your authenticity...you are helping so many ppl...
@canadiansparky646 ай бұрын
All the best for your future endeavors, hope everything works out well. Marriage #3 going on 10 years now. When it ain't right, it ain't. Sucks but blue skies ahead, I hope. About the 3d printer, I read alot of problems online, have you had any with yours ?
@davidthurman39637 ай бұрын
Change is sometimes really hard, but growth sometimes requires it. Here in the forests on the oregon coast and other locations south, fire sometimes is required for new growth to occur. Therapy is a good thing. That said oh no maybe i need a new bed slinger. Well need isnt the correct word i dont need 3d printers i want a new bed sling to co alomg woth my Core yx creality k1max which btw works awesome
@jasoncrow28197 ай бұрын
That rod was not to un clog the nozzle it was way to big in diameter mabey to push the fillement through the boden tube? Either way no worries great prints and amazing ideas you have with your machine.
@jimbolaya657 ай бұрын
Wishing you all the best as you move forward on your journey. Thanks for all the great content and for promoting BetterHelp. We’ll continue to support your channel, Fix products, scale goodies etc 🙂🫡 keep on tiny truckin’ !
@poepflater6 ай бұрын
I find it harder and harder recommending a single filament printer, unless it is very high speed.
@kenely83287 ай бұрын
Take the time you need to heal, take care,
@johnconnell14247 ай бұрын
Wish u the best love your videos ❤ that is an awesome printer I'm amazed of their low cost.thanks for sharing 😊
@conradlapointe81877 ай бұрын
Sorry you are feeling down. Love your chanel.
@jasonjones52137 ай бұрын
The price always put me off picking up a printer.This one under $300 though I might have to pick one up.
@8poundquark7 ай бұрын
Nice printer. Thanks for the good advice. Hope you do well. Vulnerability is sometimes mistaken for weakness. You are displaying bravery. Walking away is hard. Not looking back is harder. Be strong. ❤BTW, you're totally rocking that hair.
@matthopkins62866 ай бұрын
Dang, I hope everything works out. Good luck and God bless.
@andyb99947 ай бұрын
Me and my daughter love your channel and you are 💯 awesome, take care of yourself first and everything else second, We will be waiting, and I'm sure all other viewers will be waiting also if you need some time!!! 👍👍💪
@gsrider5697 ай бұрын
I really had no idea how inexpensive these printers are. I'm impressed and might pick one up. For me, it would be RC accessories. For starters anyway lol BTW, I'd be willing to buy your misprints in the meantime, they look pretty damn good. Totolly love the jerrycan set up you made and rack. Find the ones for sale at the 1:10 scale small looking. Tough times now for you eh, (I'm Canadian). The sun will shine again for you kiddo, just takes a bit of time. Stay strong!
@Hero1117a7 ай бұрын
Be safe and take care
@TS_Mind_Swept7 ай бұрын
Definitely seems like it has notable advantages over the SE; guess the two of them will be swapping places on my wish list
@RCGirl7 ай бұрын
I think it's worth the extra spend to get quite a bit more. BUT I have also heard that people also like the SE
@TS_Mind_Swept7 ай бұрын
@@RCGirl the SE definitely seems like a valid printer, but since I would end up switching out the things for what this one has anyway, I feel like it's worth getting pre-assembled 🤷🏿♀️ (just wish it had the accelerometers and camera as well... I guess that's just the bambu lab A1 though 🤔 ..who knows, by the time everything is said and done I may end up getting that one anyway SuperVinlin )
@RCGirl7 ай бұрын
@@TS_Mind_Swept they sell a cam and vibration sensors separately
@TS_Mind_Swept7 ай бұрын
@@RCGirl yeah, ik; butt again, kind of going back to the whole "may as well buy it pre-assembled" thing (tho the option to put the camera wherever you want is definitely appealing 🤔)
@unogno6 ай бұрын
You are just an awesome and interesting person. Love your work. Talented, smart AND pretty. Ya got the whole package.
@Cameron28746 ай бұрын
Great video. Now you have two 3d printers, which one would you recommend? Which one is your preferred? Keep up the great work
@RCGirl6 ай бұрын
This one! Simpler to use, bed seems to stay level better, smaller footprint. I think the ender 5s1 is slightly better at printing finer details though
@Cameron28746 ай бұрын
Thank you for quick reply. My birthday coming up( best excuse in the world for a new toy) so looking to pull the trigger on one. Thanks again and keep up the great work.
@mistergamerguy3 ай бұрын
The scraper tool you showed, is that metal or plastic blade?