How does it perform?! Trail Running my SCX10ii Leaf Spring Conversion (Pt. 3)

Рет қаралды 51,253

4 жыл бұрын

Welcome to part 3 of my Axial SCX10ii RC4WD leaf spring conversion! In this video, I trail test it for the first time. How does it perform? I share my initial impressions and things I want to continue to modify and adjust!
Part 1: SCX10ii Leaf Spring Conversion (& my Jeep turns into a Truck!): • SCX10ii Leaf Spring Co...
Part 2: My SCX10II Gets a Mojave 2 Body! (LEAF SPRING CONVERSION PT 2) • My SCX10II Gets a Moja...
*******************************************
SUPPORT MY CHANNEL
Become a Patron: / rcgirl
CONNECT WITH ME
On Instagram: @RC_girl / rc_girl
On Facebook: / thercgirl
Vinyl RC GIRL decals: www.etsy.com/shop/the...
RC Girl Tees: teespring.com/stores/rc-girl-merch
*******************************************
ITEMS IN THIS VIDEO
RC4WD Leaf Spring Conversion Kit: bit.ly/38vCQJy
RC4WD Mojave II 4-door hardbody (fits 12.3" wheelbase): bit.ly/35MgpnT
Axial SCX10ii Cherokee XJ Kit: amzn.to/2xbUQIi
MyTrickRC UF-7 Lighting controller: www.mytrickrc.com/shop/uf-7c-...
LED Headlights: bit.ly/2OqGj6P
Xtra Speed Cantilever shocks: bit.ly/2vP4N0N
RC4WD Roll Bar Rack: bit.ly/3b8UZyR
RC4WD Toyota Decals: bit.ly/2SewKXu
Proline Scale Accessories: www.prolineracing.com/accesso...
Traxxas 3628 Receiver box: amzn.to/374xiEV
Bucket - Scale by Chris: bit.ly/2Ou6zLo
Tamiya TS-78 Field Gray spray paint: amzn.to/37j6AZP
RC4WD Onyx 1.9 beadlocks: bit.ly/2jLBKWd
Pro-Line Racing BFG Mud Terrains, Predator (1.9"/4.19"): bit.ly/2sLMvfI
ELECTRONICS
Tekin RX4 ESC: bit.ly/2ICG2sM
Tekin Roc412 motor: bit.ly/2XWQwM7
Gens Ace Adventure 5000mAh 2s lipo: bit.ly/2jMAzpt
PowerHobby 729MBL high voltage waterproof servo: amzn.to/2ulQCzN
MOJAVE II 4-door MOUNTS FOR SCX10II
DinkyRC: bit.ly/2RhDEvK
ShrinkRC body mounts: bit.ly/2UqfAcc
MY OTHER AXIAL SCX10II BUILD SERIES VIDS
Vinyl Body Wrap: • HOW TO VINYL WRAP YOUR...
Set-up Tips & Upgrades: • SCX10ii Cherokee XJ Ax...
Lighting Kit Install: • BRIGHTEST Light Kit fo...
Winch Install: • Control a scale winch ...
Music: "Leading You On" The Greatful 7
Music from Epidemic Sound: www.epidemicsound.com/referral/oe4bav/
#SCX10ii #LeafSpringConversion #RC4WD
*******************************************
MY KZfaq FILMING GEAR: amzn.to/2yJE2wd
KZfaq BACKGROUND MUSIC: Epidemic sound - www.epidemicsound.com/referra...

Пікірлер: 226

@wvbassassassin 4 жыл бұрын

I couldn't agree more that the leaf springs give the truck a more scale look; I like the way it moves over the obstacles. Great job!

@henrockmarte187 3 жыл бұрын

So freaking dope the way the front wheels matched the spiraled stairs when you backed up and turned the front wheels ...gorgeous set up btw!

@beesod6412 2 жыл бұрын

only a year late, But this is by far the best looking crawler I've seen period. I may be abit biased since I love that truck, but the color, the parts, just perfect in every way. New desktop background! thanks!

@O.L.D_RC 4 жыл бұрын

Watched a handful of vids and had to subscribe. Enjoy the heck outta watching you tearing up more than one hobby. I thought I was bad for having multiple "toys," throwing on mods, and building. Good to see a girl that gets so involved! Great info too, thanx!

@tomlucasrccrawlers9108 4 жыл бұрын

Rig look good. The grub-screw mod is a Trailfinder mod we've been doing from the beginning.

@edwinnegron7761 4 жыл бұрын

looks awesome, especially love the bucket!!!! the turning radius is unreal coming down the incline

@udoworner4399 2 жыл бұрын

You created a wonderful model there. I like the color scheme and the cantilever shocks and everything is so harmonious. The only thing that bothers me are the amber colors, rear side markers. .I have a HG P407 myself and for lack of two red 3mm LEDs I had to use the amber-colored ones, because the kit I use only includes four amber LEDs as side markers. .you are doing a great job and I like to look over your shoulders. LG, Udo from Berlin / Germany

@nathanstewart2018 3 жыл бұрын

Im trying to get into the scale side of crawlers. You have some great videos to learn from. Thanks 😊

@derekpirie9188 4 жыл бұрын

Agree, leaf springs all the way. Brilliant job with the upgrades. You nailed the wooden steps 2.37 ~2.52... Excellent driving. I remember this Hi-Lux being built to the production Line that i looked after in the early '80's, in Durban South Africa. The best 4x4 for its price.

@mfp5 4 жыл бұрын

Love the build!! Looked great out on the trail! Also, just grabbed a sticker for my tool box! Keep up the great and informational videos.

@RCGirl 4 жыл бұрын

Thank you!!

@billcox87 4 жыл бұрын

nice!!!!! i've been thinking about this kit for awhile and since i have 3 scx10 ii's i think i might just 'have to' convert one;) thanx Rc Girl, the truck looks fantastic by the way!

@andyrichey1192 4 жыл бұрын

Yeah RC girl Love your rig looks awesome, I have the marlin crawler lots of fun to drive. Yeah the grubs screws for the body first thing I did. Appreciate you sharing. I enjoy your videos a lot from Manchester Michigan. Have a great day

@markfehrenbach4204 4 жыл бұрын

Your leaf spring conversion worked great! Nice flex also. Wonderful job and the scale look is perfect👍👍👍

@julito3054 4 жыл бұрын

Awsome build...I can't believe I actually liked the leaf springs....awsome watching it go down the spiral steps...it handles very scale! RC U LATER RC GIRL.

@bcherbs 4 жыл бұрын

lol I love the little bucket . You are a good host , no high pitch fake tv voice , great vid

@jeffussery4884 4 жыл бұрын

I love the scale 5 gallon bucket. I'm a nitro buggy or truggy type myself, I love the scream and the speed. But I've always thought Axial makes some real cool stuff. Your Toyota pickup is vary cool.Thanks for sharing your experience with us. I can't wait for you next video.

@mitch_smith 4 жыл бұрын

love the old school paint job. reminds me of the one my oldest brother had in the 80's.

@sut2910 4 жыл бұрын

Great video! thanks for sharing. I wish that Toyota had really offered an extended cab/crew cab when I bought my 1982 SR5 new, but they did not. Looks pretty cool. Lighting and accessories add a lot. You need an RC Girl in the drivers seat to complete the look!

@waynetate9895 4 жыл бұрын

You could get a fanny pack, or some people call it a hip pouch to keep a few tools on your person and that way you won't have to go back to the pit. You can have a few of the most common tools in a very small bag that is only on your hip and won't make you hot in the heat, especially if you are in a endurance competition, or are out on the trail. Great build.

@3srandy 4 жыл бұрын

One of the best looking scale rigs I've ever seen, NICE JOB!!!!

@stevenf0 4 жыл бұрын

Kicking ass and looking good doing it! I ended up fashioning wheel wells out of black gorilla tape for my truck.

@dragonflyjoyride 4 жыл бұрын

Great video! You can get aftermarket fender flairs if you do decide to run C1. Keep doing what your doing ✌🏼

@boldrbangr9834 4 жыл бұрын

Great job! The leafs look scale, but as you said, you need to drive accordingly, as they can't compete with 4 links. Miss Dante supervising the outdoor shots. Hope he's doing well.

@dronecamps 4 жыл бұрын

One handed driving skill like a Queen Boss. Like the color of that truck. Looks good!

@CarminesRCTipsandTricks 4 жыл бұрын

Looks GREAT Hayley!! Almost makes me want to try Leaf Springs! 😉 The Grub Screw idea does work. Some think that Scale Shocks are better.... Don't know why! Actual Oil Shocks seemed to give your Rig more stability. Carmine ✈🚂🚙

@brmscalecustoms9788 3 жыл бұрын

Recently found your channel and subbed. Love your videos, keep them coming!

@kinslersrccustoms6945 4 жыл бұрын

RC Gril nice driving. And with the setup you have on the backend of your Toyota and being able to see straight through from wheel to wheel' I it was me I would cut off the hole floor of the bed and drop it right down to the frame and then make new bed walls. This way you can't see through and under the truck bed because this mod gives you a true full drop bedand that is going to be all the more scale and then later on if you cut out your tailgate to make it open and close now your bed floor is flush the tailgate when it is down. Your Toyota looks very well done and given better outside. Love the video.

@linlinlixin2637 4 жыл бұрын

Just finished my LC70 following your instructions from your blue wrangler video. It's dark grey. Now i want to get this body and do it yellow like the pizza planet truck in toy story 😂

@fixedgear.fl.4225 4 жыл бұрын

I watched with interest. Because if I'm correct, you added leaf springs. And I just bought a toyota w leaf spring on purpose because it was completely scale. I have a spring over shock dedicated crawler. But I enjoyed your video very much and regardless that it doesnt articulate as well, its great. Also, maybe you know about REVOLVER AND Z BOX Accessories for leaf spring articulation. Thanks for fun and informative video.👍👍👍👍👍👍👍👍😊😊😊😊😊 .....by the way...took your advice and bought the same 5 gallon bucket....only blue. Love it.

@u_t_d_s_h-1_a 4 жыл бұрын

Hey, I got a solution for the problem of seeing through the wheel wheel wells. To fix it, I manufactured a wheel well cover with aluminum sheet in a truck I built, and hardened it with epoxy hardener to help strengthen it and help stave off rust and, sprayed it flat black, then attached it to the body with strong loop and hook straps, a really strong one and it worked perfectly.

@u_t_d_s_h-1_a 2 жыл бұрын

An interior would be a good addition to the Mojave pick up, aside from covering the wires, it adds beauty to the tiny truck. .

@ResslersRC Жыл бұрын

Amazing build, I want to do a leaf spring conversion as well! Love the attention to detail!

@akirafromwiisports5096 4 жыл бұрын

A cheap resolve for the wheel wells is duct tape they make actual lexan ones but I never used those. Love the realistic tire conformation to the stairs.

@uncletom1971 3 жыл бұрын

Good job on your conversion, it looks very realistic. And you crawl very well :) What I'd like to see though, which I've not seen much of because obviously you don't use it while crawling, is sway-bars / anti-roll bars. You know trucks aren't only for crawling, there are beach races and open road races where 4x4 vehicles go pretty fast, like in the movie The Goonies (from 1984) where you can see this annual beach truck race at the beginning of the film. I'd really like to see you drive your 4x4 vehicles not only crawling in heavy terrain, but also experiment some on gravel roads at a little more speed, like turning on gravel, perhaps taking smaller jumps, things that challenge the stability and maneuverability of the car.

@scale6039 4 жыл бұрын

Sooooo in the future more leafspring builds 😋. Looks great and trail too Have fun with it

@mattwheelden3647 4 жыл бұрын

Had to watch the video again I like that truck and how it came out, keep on trailing RCgirl

@RCGirl 4 жыл бұрын

✌🏼

@CentralVAracer 4 жыл бұрын

Great video series. The leaf spring setup definitely looks more scale. A+

@JeffsCustomRC 4 жыл бұрын

Great video and shooting , thanks for the ride👍🏼👍🏼👊🏼

@Cliffolaus 4 жыл бұрын

Hello RC Girl! I've been watching your channel more and more lately and must say, I like your content, your projects, and your style. So I just subscribed, to better keep up with what's going on. I am relatively new to RC, but got hooked real quick and it has become one of my main passions. The other one is music and my guitars. So naturally I couldn't help but notice a guitar on the wall in just about every one of your videos. Have you considered maybe including a musical intro now and then, or playing us out with something you're working on at the moment? Thanks for all the nice projects, insight, great infos and tips!

@Nordmann61 4 жыл бұрын

Thank you for a nice video as always! Even if the leaf spring mean less articulation, I think the super scale trail truck owner will not care so much about it, super scale trail trucking are not about reaching a finishing line first, "the journey is the goal", and they will just select a trail that the truck can handle. It made the truck look good and I am sure they are durable, nice choice. About the inner fenders, you can mould them yourself, using plastic from emty plastic bottles for instance. Make a mould from wood or clay, place the plastic sheet on it heating it with hot air gun, and forming it with your hands using gloves. You can fasten the innerfender to the body or the chassis, whatever is most practical of look the best, and after painting it will add much to a scale look and keep much of the dirt away from the interior. Good luck if you want to give it a try. Here are a few videos to get you started: kzfaq.info/get/bejne/geBmm8Jk1LjUh5s.html , kzfaq.info/get/bejne/j650i9Ko29uqgaM.html . Cheers.

@robbrcnstuff4220 4 жыл бұрын

That's a cool rear spring setup, looks like it works pretty well.

@dennis586 4 жыл бұрын

heres is a brand of inner fenders for the scx10 II you can get them at rcmart or ebay! It is a good looking truck!

@j.m.y.t.5440 4 жыл бұрын

I love your Build, looks great. You're also a super Driver! Very nice to watch .😊👍

@EmotionalRc 4 жыл бұрын

The details of the vehicle look good. Thank you for the good explanation👍👍👍

@natalramos4988 4 жыл бұрын

Great truck RC Girl you are the best, your truck looks so real, I love it

@peterbleil9169 4 жыл бұрын

Grate looking truck ! You can search for inner venders for scx 10 on eBay or wish you just cut them to fit. Once again grate looking truck very scale nice colour as well

@WNYOutdoorAdventures 4 жыл бұрын

Very Cool RC girl -- enjoy your RC content thumbs up EJ ,I had my drone skydio track my xmaxx my last vid :) still learning

@BlueDually4x4 4 жыл бұрын

I wouldn't worry about hiding the frame rails in the rear of the truck. As for tire coverage, just make some fender flairs. It is a good looking truck and though a bit stiff does seem to handle well.

@NorthStarDrones 4 жыл бұрын

Beautiful Build😉👍 I have some 3d printed wheel wells for my SCX10 II that work pretty awesome, they keep all the mud and grime out of there too. Gorilla tape also makes great fender/ wheel wells and stuff like that. also the gorilla tape looks kind of like carbon fibre, if you do it right it looks great 👍 . Just a thought.

@bryanmcmanus9079 4 жыл бұрын

I love that you did this! Been very interested in doing this myself. Where are you from? Id love to see your rigs on the trails sometime

@rogerpenndorf5221 4 жыл бұрын

Look and Drives SUPER Stock love the Springs You must be sooo Proud

@joetheado5864 4 жыл бұрын

There is a video of someone taking plastic lunch meat containers and using the ends. And they painted them black and they looked really good. 👍

@fcastanedas4937 3 жыл бұрын

Your Truck look like original. I love it. Profesional job.

@kinslersrccustoms6945 4 жыл бұрын

RC4WD has beadlock wheels that will move your tires in so it will be a class 1. And G Made has a set they do the same thing and they are heavy so they will help it to be more planted as well.

@serg.r4860 4 жыл бұрын

Pretty cool, looks like it could be in a shot for a movie.

@chaoticadventure 4 жыл бұрын

Excellent job. Love the color choice.

@HBFTimmahh 4 жыл бұрын

Use Oleo Tubs or Cool Whip Tubs, some sort of Plastic bowl (Tupperware perhaps). Find ones that are the radius of the well wells, and cut and mod them to fit. add paint or truck bed liner and roll.

@Chon-c 4 жыл бұрын

Hi. Im the one who said you’re “cutest gal in RC.” Lol. But I’d advise 3-d print or do a press/stamped plate metal for your stuff to cover under your bed & inner fenders . So “Look on Harley designs” last KZfaq vid ,it has a section in it about all these solutions that might fit your needs. And look up “push rod 3-d” & “Make it RC (company names fir 3-d printed stuff ) for your interior & other accessories . They both have really kool stuff.Hope this helps 😉. Again. Nice job. Tyrs are perfect.

@Chon-c 4 жыл бұрын

Btw. In the Harley designs vid. ? The are a ready made cad download you can get where you ,or a friend, can 3-d print those fender well cover ups. The rear should be the simplest just by printing something black ,that’s flat .

@bluesimon13ify 3 жыл бұрын

Well it worked out, I think you have done a great job, hopefully you will find an interior,😀

@fernsolo 4 жыл бұрын

Excellent work RC girl 👍

@jnsfrahm 4 жыл бұрын

The leafs make the truck look and drive like a full scale truck. I also think it'll make you a better driver because you have to lean to drive with more finesse.

@Jstall7543 4 жыл бұрын

That’s really nice! Back bumper hits just like a real Toyota! Lol! Great Work!

@brentpollock4137 4 жыл бұрын

Great job on the build paint color is awesome keep up the process with rc. 👍👍👍👍

@RCGirl 4 жыл бұрын

Thank you! ✌🏼

@RCCarRacing 4 жыл бұрын

Great Video! Love this conversion.

@whitecompany18 4 жыл бұрын

Rc4wd Land Rover 90 wheelarche flares would fit and cover a percentage of your tyre if you did think about going that way.

@jahmenrcbuildingasone4254 4 жыл бұрын

Tupperware makes incredible wheel wells. There are videos on KZfaq about could be a good option. Ebay has them as well. You 4got Connecticut😢

@RCnerd74 4 жыл бұрын

The color scheme is not girly at all :o) Love it!

@nunodias3331 4 жыл бұрын

Greeting from Portugal 🇵🇹 Nice video, thats a realy nice truck, love that paint job

@woodyirl5842 4 жыл бұрын

I just got iner fenders off Amazon for my scx10 ii and they will cover all what you want to cover. Could get some one to 3d print them or get crafty and make them out of plastic or what ever... and fender flairs will bring ur fender out which if it's the same as real vehicles legally should work I think... i don't know rc comps though

@alanhafer828 4 жыл бұрын

Great rig ! You did a great job!👍👍👍👍

@svincentr 4 жыл бұрын

Nice truck & cool video! Let’s see you play the strat hanging on the wall 🎸👀

@Adamc0607 4 жыл бұрын

great review! Love the new body

@RcCrawlerGuy 4 жыл бұрын

Looking good! Color is badass! ❤️

@donharsh5469 3 жыл бұрын

Awesome truck and nice color too RC Girl 👍👍👍👍😎😎😎😎❤️

@barajastony0 4 жыл бұрын

You can add fenders to cover more of the tire and make it class 1 ready

@rodrigoairesmatiassebastia1294 4 жыл бұрын

to me it looks like the problem is not the long wheel base, but the departure angle. If you chop the back at the axel it should solve the problem.

@davidmussack4529 4 жыл бұрын

So, the undercarriage of your truck is what is left of the old SCX10, right? The axles, transmission and all. I just, mostly, finished an RC4WD TF2, and just took it out for its initial run, first truck with leaf springs. Pretty different, but the truck is very capable as well. I like it a lot. Great video, keep them coming along.

@adammorgan7874 2 жыл бұрын

It looks great!! Good job!

@mtgoat4434 3 жыл бұрын

Amazing truck! Great engineering 👍

@RCReporter 3 жыл бұрын

Nice video I also got the desire to convert mine!

@rccrawlerextreme 3 жыл бұрын

Awesome place to crawl! Nice video taken

@MauzyrockRC 3 жыл бұрын

Hey, great content! I am new to RC, I love your detailed look into your builds. I am curious about this rigs left turning radius, seems very wide compared to right turn. I noticed on the wooden spiral descent. I hav similar issues on my crawlers... How to remedy?

@Jjcustomsllc 4 жыл бұрын

Nice job Haley 🙌

@tombaker1516 4 жыл бұрын

Awesome build series!

@davidhazelden2054 4 жыл бұрын

Ye put interior in it n u can get inner fenders for scx10ii which will look good or make 1 Hun it rearly nice truck Hun 👍👍👍👌👌👌👌

@lief.a6938 4 жыл бұрын

Awesome rc trailfinder☺

@tombaker1516 4 жыл бұрын

Got me really motivated to build one!

@logjammin084 4 жыл бұрын

Love the color! Let me ask now it’s all said and done and the amount of work and money you’ve put into it... looking back would you have rather gotten the RC4WD kit and built a new rig or would you convert a scx10 again?

@tomlucasrccrawlers9108 4 жыл бұрын

Good question. Why take a 4-linked rig and leaf it? You're literally going backwards in performance and technology. Why take an RC4WD TF2 rig a 4-link it?....if you're going to do that...why not just buy a "plastic" rig that's linked already. Really...the best answer is it just a hobby , right?! Have fun.

@TheBastiBmx 4 жыл бұрын

Looks clean, I like it good Build :)

@slam854 3 жыл бұрын

That is one COOL looking truck!

@JesseBMotors 4 жыл бұрын

Great video and good looking truck 👍🏁

@christopherrowley8788 4 жыл бұрын

You can get a drop bed or make the bed and for front you can buy inner fenders or diy them

@ozboy8144 4 жыл бұрын

Looks sweet nicely done 🙂👍

@mje19D 4 жыл бұрын

Sweet truck. Sure looks like it needs some inner fenders like you said.

@WorldControlRC 4 жыл бұрын

Great video and the Toyota looks just great! Do you have the camera on the remote control or how do you film and drive at the same time?

@RCGirl 4 жыл бұрын

Film and drive just holding everything!! I have a dx5 rugged so I was able to drive one handed, but it was not easy!! haha

@WorldControlRC 4 жыл бұрын

@@RCGirl That doesn't sound easy but good to know :D maybe I'll try that too :)

@ezeNdog 4 жыл бұрын

Truck build is awesome.. looks great and awesome A.T.D. love what your doing and I would like to see more women get into the RC world...IMHO I think alot would like it and r good with the A.T.D. of scale building.