Low CG, Belly dragger rc crawler detailed build and parts list

Рет қаралды 67,546

4 жыл бұрын

This is the detailed build of this low CG Belly dragger rc crawler to find the best class 1 rc crawler and best class 2 crawler. Parts from G-speed, team garage hack, ottsix tires and 3brothers. Buy it links:
⁃ SCX10 iii builder’s kit (parts used from the kit) - snp.link/ab5dc96d
⁃ (2) AR44 universal axle - snp.link/d2ac68b4
⁃ Body mounts - snp.link/fc214079
⁃ WB driveshaft set (cutting is needed to get the correct length) - snp.link/0b11c563
*The SCX10 ii builder’s kit is not needed as the only remaining items from it were the driveshaft and body mounts that were used.
Ottsix tires - snp.link/72fcd27d
⁃ (2) Voodoo KLR 1.9/4.7 tires (red)
⁃ (2) 1.9 Halo WebWrap Foams (blue/red)
⁃ (2) 90mm Voodoo Scale shocks (42.5wt oil)
⁃ No slop shims
Robinson Racing Pinion - snp.link/3ed50486
⁃ 32p pinion gear 13T
Team KNK hardware - snp.link/f1a5e816
⁃ SCX10 ii stainless hardware kit
⁃ (4) 3x6 aluminium spacers (for shock mounting)
⁃ Aluminum body mounts (not installed yet)
⁃ * Consider buying bulk screws for future builds
Vanquish - snp.link/567df28b
⁃ (2) VP SLW 350 wheel hub
⁃ (2) Incision AR44 axle gear 30T/8T
SSD RC - snp.link/5f2556eb
⁃ Pro aluminum knuckles
⁃ Pro aluminum c hubs
⁃ Pro44 rear axle case
⁃ Pro44 HD metal diff cover (red)
⁃ Aluminum link mounts (black)
Proline Power Wagon - snp.link/734d5cc6
⁃ 1964 Dodge Power Wagon body
Tattu Battery - snp.link/075e056f
⁃ Tattu 11.1v 75c 3s 850mAH lipo w/XT60
gspeedchassis.com
⁃ GSPEED chassis TGH-V3 carbon rails
⁃ GSPEED chassis panhard mount
⁃ Team Garage Hack dual servo mount
hardcore-rc.ecwid.com
⁃ 70mm chassis braces
⁃ GSPEED V3 links
⁃ SCX10 ii offset panhard link
salinasdesignconcepts.com
⁃ ODT V1 - Complete Transmission w/skid plate (35% OD / 60T Spur)
⁃ Rock Slider battery tray (30mm / angled on a diet)
⁃ 3D printed flat bed (power wagon fit)
www.teamgaragehack.com
⁃ TGH DSM M1.5 spacers
www.3brothersrc.com
⁃ G13 direct power servo
⁃ 25T aluminum servo pinch-style horn
⁃ Yellowjacket 2000kv 14-pole non sensored brushless motor
⁃ 3s dual lipo no-solder servo and accessory connector - dual JST
www.beeftubes.com/store/c1/Fe...
⁃ Beef Patties brass hex style
⁃ SCX10 ii / AR44 Beef Tubes - brass - splined
⁃ SCX10 ii diff cover brass
⁃ SCX10 ii lower link / shock mounts - brass
home.castlecreations.com
⁃ Mamba micro X - sensored
www.fasteddybearings.com
⁃ (2) AR44 axle sealed bearing kit
Tech Factory Racing (Facebook)
⁃ 1.9 beadlock Carbon wheels
www.homedepot.com
⁃ Velcro Brand (extreme outdoor strip)
*If you do have the kit most items will transfer over to a GSPEED packaged deal that is offered. The only items needed in addition are the servo mount, servo mount spacer, panhard mount, electronic sliders, hardware
Buy your kits and upgrade parts from this Amainhobbies link to support RC Review: snp.link/6640d084
Join the RC Review Facebook Group here: / 302319827122846 for early videos and extra footage.

Пікірлер: 189

@shanemattson1024 4 жыл бұрын

I really enjoyed this one. A regular series with guest builders, and a breakdown of their set up would be an awesome idea. This thing was extreme, and far beyond any level I'll reach, but I still found it very entertaining, and informative. Great episode. Keep it up.

@RCReviewChannel 4 жыл бұрын

Glad you enjoyed it! It was something different and a little beyond our wheelhouse or comfort zone since we are not experts. But even I like watching it as it shows our learning and enthusiasm. Didn't even have to edit it. Our errors and laughs are all in there and it adds to the flavor.

@rcvurooom8837 4 жыл бұрын

Glad you enjoyed it. So much fun to learn. Lots of coffee too

@coinhawk 3 жыл бұрын

I have watched this like 4 times, I think I finally understand..... Great build..

@tmdario 4 жыл бұрын

I'm planning to build a custom Truggy using that Salinas transmission, NWSD chassis rails, and VP rockjock axles, this video was really useful, it goes directly to my favorites, thanks for sharing. You should show more custom projects like this

@RCReviewChannel 4 жыл бұрын

Sounds great!

@prestonakins1532 4 жыл бұрын

Thank you soo friggin much for making this video. It's hard to find a video on this type of build with running video AND a detailed commentary. This is why I subscribed to this/your channel almost a year ago!

@RCReviewChannel 4 жыл бұрын

Glad it helped!

@JamminJim42 4 жыл бұрын

VERY nice ! Thanks so much to you both for doing this vid. It really opened my eyes about a class 2 rig. Keep the belly dragger vids coming !!!

@seanmcpherson7962 4 жыл бұрын

Just came across the idea a couple days ago and tried it today. Why not Buy teflon spray from dupont and coat(or dip) the brass(or anything else) in teflon. Its easy to reapply and teflon has a lower coefficient of friction than any rc part materials.

@rcvurooom8837 4 жыл бұрын

That’s an idea. Doesn’t hurt to try

@bryanshull7976 4 жыл бұрын

L.c.o.g. is the hot set up for crawling. Belly draggers rule.🐍🐍🐍🐍🐍🐍🐍🐍🐍🐍🐍🐍🐍🐍🐍🐍🐍🐍🐍🐍🐍🐍🐍🐍🐍🐍🐍🐍🐍🐍🐍🐍🐍🐍🐍

@talllivingsmall 4 жыл бұрын

Very informative! I started ordering parts weeks ago and I’m almost ready to start the build. Thanks to you both

@michaellenheiser3157 4 жыл бұрын

Cheater chassis are everyday questions on forums. This was a great forum and I was introduced to company's that I have not heard of before. I hope you are able to do more of these Nice job Francis and Vu

@RCReviewChannel 4 жыл бұрын

Really appreciate the compliment. We are not experts but we have inquisitive minds and try to learn everyday and think clearly about the questions and answers that keep folks like us up late at night. :)

@rcvurooom8837 4 жыл бұрын

Thanks so much. I gotta give it up to the rc community here and on FB. It’s a learning process and more than one solution for sure.

@ruftime 4 жыл бұрын

Thank you guys! Makes sense in this case just to direct power the servo, since it already has a regulator circuit built into it.......course the stand-alone bec market may take a small hit😎. Less failure points and weight too.

@RCReviewChannel 4 жыл бұрын

Yes, exactly

@michaelgravlund9194 2 жыл бұрын

So awesome. Just what I am looking for.... a video which shows it all 😄👍🇩🇰... knew I had to look here Francis 👍... you are the best

@MrAljackie 4 жыл бұрын

Great setup!

@matthutch5919 4 жыл бұрын

I've just got into crawling totally loving it. Coming from a 4x4 background it's awesome fun pulling up at camp & getting the crawler out for a run. Gr8 video, gr8 information. Thank you for your help 👍 much appreciated

@RCReviewChannel 4 жыл бұрын

That is awesome! Appreciate the compliment

@Pablosan7 4 жыл бұрын

YES!! Thanks guys!!!

@seanmcpherson7962 4 жыл бұрын

Siiick build! Science this stuff. Find some tungsten to replace your brass.

@andyrichey1192 4 жыл бұрын

Awesome build, really love that power wagon body , Great job.

@RCReviewChannel 4 жыл бұрын

Thank you very much!

@malfunk7192 4 жыл бұрын

Digging that bike influence on the wheel speed along with the flipped shocks. Details on details. Thank you guys on the non ferrous metals tip too. And thanks for sharing the rig guts. Lots of care went into this build. Dope.

@RCReviewChannel 4 жыл бұрын

Our pleasure! Metallurgy better than jewelry

@OldMan4of4 4 жыл бұрын

I now know what I want to build for my second crawler. Thank you for putting this video together. Very informative.

@rcvurooom8837 4 жыл бұрын

Glad I could help out

@danielsonhobbies 3 жыл бұрын

@@rcvurooom8837 hey Vu, how and where did you get the post that mounts to the flatbed for rear cab of powerwagon body? Kinda stuck, any help would be appreciated.

@4GregF 4 жыл бұрын

This truck should be available as a kit!

@old-rcplane-phart 4 жыл бұрын

OR at least a conversion!

@brianmoreno3 4 жыл бұрын

Toyzuki has a kit. Sorta.

@johnrobholmes 4 жыл бұрын

The sherpa from team garage hack is a full comp kit minus links and axles.

@rcvurooom8837 4 жыл бұрын

You can get this as a kit which includes the rails, skid, panhard mount, and slider. gspeedchassis.com

@ericvangampler2887 4 жыл бұрын

Somebody call a doctor because that rig is sick 😷. Thanks for sharing the build with us all. Stay healthy & safe gentlemen.

@RCReviewChannel 4 жыл бұрын

so sick!

@trashPanda416 4 жыл бұрын

Great freaking explanation! On the belly crawlers ! 👌 nice!

@Firewlkre 4 жыл бұрын

Looks really cool and great for niche crawling like smooth rock surfaces but not for deep sand, tall grass or mud or large rock strewn hard pan.I'm not anywhere near anything like Mt. diablo.

@Ferra3904 4 жыл бұрын

Well now I need to build one of these. Didn't even get my scx10.3 kit yet and I'm ready for the next build lol. Good stuff!!!

@ashleyconnelley556 3 жыл бұрын

Man Iv watched this video like ten times checking this truck out. An man I love it

@xxrfmxx 4 жыл бұрын

love the build great work

@RCReviewChannel 4 жыл бұрын

Thank you! Cheers!

@Mrrootsfull 4 жыл бұрын

Very nice video! Fresh, new and i learned something. I have posted negative reactions about your video's in the past because sometimes it is more of the same but this is a very good one! Love it.

@RCReviewChannel 4 жыл бұрын

Right on. I sense a turnaround. We love everything about the hobby. Just so little time.

@baxrok2. 4 жыл бұрын

Very impressive build! Also, a very nice video both showcasing and detailing it. Thanks!

@comeandtakeit5709 3 жыл бұрын

Sick build!

@thotho7869 4 жыл бұрын

Awesome man, thanks for doing this vid. Just here to leave a thank you as this was the video i was really interested in :)

@RCReviewChannel 4 жыл бұрын

Glad I could help!

@RcScaleTales 3 жыл бұрын

Awesome ! Great build

@peternorin8554 4 жыл бұрын

love the build. See you there wiggling the drivetrain thinking "too much slack" :P

@RCReviewChannel 4 жыл бұрын

No man, I was just blanking out. I should have torqued that chassis!!!!!

@ztwntyn8 4 жыл бұрын

Man that was awesome! I can relate to a few of these mods that paid off big on my wraith. Now I have a few more ideas 👌✌️ I really dig those little brushless motors.

@sitlos. 4 жыл бұрын

Lol. Na, he was thinking how could I make one, and make it better🤔🤔😂😂.

@darrenconnor6919 4 жыл бұрын

That rig is SWEET!

@RCReviewChannel 4 жыл бұрын

Isn't it? So cool to have that in the stable. Different level and different driving experience. The old trail is new again.

@rcvurooom8837 4 жыл бұрын

Thanks so much.

@MrFruitflan 4 жыл бұрын

i just bought nearly all these parts of the back of this video! cant wait for it all to arrive in UK may have to wait a while :)

@RCReviewChannel 4 жыл бұрын

Hope you enjoy it! That is very cool to hear!!!!!

@jla1137 4 жыл бұрын

Muchas gracias Amigos, gracias ¡¡

@BobL1 3 жыл бұрын

This video is the best!

@derricksazrc3411 2 жыл бұрын

This content was amazing.

@dfwnick5309 4 жыл бұрын

Always enjoy your videos.

@RCReviewChannel 4 жыл бұрын

When we're happy, hopefully, the viewer smiles as well.

@dfwnick5309 4 жыл бұрын

@@RCReviewChannel I am more into off road and on road but your crawler videos are awesome...totally engulfed with crawling now and learning from your videos...rock on bro..

@Tuidkskiwjdhdbd 3 жыл бұрын

Thank you

@cmalt-z7171 4 жыл бұрын

Love it. Great idea, great info.

@RCReviewChannel 4 жыл бұрын

Glad it was helpful!

@cmalt-z7171 4 жыл бұрын

@@RCReviewChannel I've seen these rigs on all of the competition videos, but being a noob had no idea where to get them. Or the parts to build one. Finding most all of your videos very informative and helpful.

@rectown 2 жыл бұрын

One of the best you have done was a real delight.

@DEMON_CHILD709 2 жыл бұрын

Great vid this helped a lot and was fun to watch! Got a trx4 im debatin modding! Thanks....Cheers

$@Fluffracka$

@Fluffracka 4 жыл бұрын

Great stuff! Very informativ and interesting. You should bring guests to your studio more...

@EugeneRCDrezgalovo48rus 4 жыл бұрын

Super cool 👍🔥

@billderas3420 4 жыл бұрын

We asked and you provided...in a hurry! Kudos FC and Vu.

@RCReviewChannel 4 жыл бұрын

Right on buddy. We skipped dinner and got within 6 feet but it's worth the effort.

@rcvurooom8837 4 жыл бұрын

So glad we could make it happen.

@Adamsracing15 4 жыл бұрын

I started rubbing candle wax on my aluminum diffs and it’s works great

@travispratt6327 3 жыл бұрын

Good idea, I use a wax Teflon chain lube, I can’t say it’s a huge difference but any little bit helps.

@jameswagner5098 4 жыл бұрын

Excellent Overview, thanks for sharing some knowledge and enlightening me to a different view!

@RCReviewChannel 4 жыл бұрын

Glad it was helpful!

@roberth5370 4 жыл бұрын

So interesting ...I learned a bunch Now teach us tuning tricks...ie. changing oil in shocks or the mounting locations etc.

@rcvurooom8837 4 жыл бұрын

I’m learning as I go. So many options

@RCReviewChannel 4 жыл бұрын

Great suggestion!

@CarminesRCTipsandTricks 4 жыл бұрын

Wu really pushed the envelope with this!! BARELY a Class 2 Rig though. 😲😲 But its capabilities can not be denied. 😎👌 It moves with FINESSE. Very smooth. DEFINITELY out of my price range... But some great ideas, that I could translate some of, into my own Rigs! Thanks Francis!! 😉 Stay SAFE Bro! Carmine ✈🚂🚙

@RCReviewChannel 4 жыл бұрын

My thoughts exactly. Cool avenue for hardcore crawlers to explore

@rcvurooom8837 4 жыл бұрын

This specific rig is the lightweight version of my C2, which has metal wheels, winch and bumpers. Super fun

@CarminesRCTipsandTricks 4 жыл бұрын

@@rcvurooom8837 I can only imagine!!

@kwad3d10 4 жыл бұрын

Hi Guys. this is Josh from Tech Factory Racing. Thanks for Plugging my wheels. You said you have a online store or physical shop? Contact me if you would like to add some of my products to your store. I have wholesale pricing available for retailers

@nloomis7836 4 жыл бұрын

Really love this video and keep going back to it. Very informative and as somebody new to crawling, I learned a lot. Maybe you would consider doing a build series, where we can actually see how a custom rig is built from scratch? Thanks for your great work on these videos!

@RCReviewChannel 4 жыл бұрын

You learned a lot cause we learned a lot. Hopefully you smiled with us since that's what it's all about.

@Jjcustomsllc 4 жыл бұрын

VU... My brother 🙌

@rcvurooom8837 4 жыл бұрын

Much love my brother

@mojaverc1585 4 жыл бұрын

Reckon you could could turn a capra in to something like this? Obviously not the same but same idea? Take off all the rollcage and scale stuff, lower the suspension, put some brass, and make some body mounts and try to find a fitting body.

@johnrobholmes 4 жыл бұрын

Look at the sherpa kit from team garage hack. Exactly what you are asking for

@mojaverc1585 4 жыл бұрын

John Holmes ok thanks! Will check it out

@rcvurooom8837 4 жыл бұрын

Yes you can. A few of the guys have done it. I never got around to trying it, but you can always check out the GSPEED page on FB

@brent042081 4 жыл бұрын

You hit my Rc Heart!!! This is my passion! I have two Lcg builds, #GMRC Drag Queen G10 chassis & #GMRC Zfg G10 chassis!! I hope you build a Lcg on your channel!!!😎👍

@RCReviewChannel 4 жыл бұрын

Right on! I know. We're thinking about it.

@chinonaz 4 жыл бұрын

Gmrc is superior

@mtkidrc2307 4 жыл бұрын

There are a bunch of great LCG chassis out there, but few come with the chassis designed for cantilever rear suspension like ClassiCutCustoms. Just one more improvement for cg that is built right into their chassis ; )

@houstonrccrawlers6445 2 жыл бұрын

Not alot of people run cantilever suspension so i guess thats why chassis designers dont make a chassis for only cantilever suspension

@tiny_the_200 2 жыл бұрын

@@houstonrccrawlers6445 and they are admittedly more difficult to tune.

@houstonrccrawlers6445 2 жыл бұрын

@@tiny_the_200 oh yeah i had a cantilever setup in my first trx4 sport and i hated it a pain to tune i went back to stock setup and performs better but now i have a different trx4 lcg setup

@mtkidrc2307 2 жыл бұрын

@@houstonrccrawlers6445 whoops, I responded from my 1:1 account but these comments are all me 🤦🏻‍♂️ …yes, a standard shock setup is easier 👌🏼

@houstonrccrawlers6445 2 жыл бұрын

@@mtkidrc2307 yeah way better in my opinion

@DESOUSAB 2 жыл бұрын

I think this will be my next project... :)

@Bidle78 7 ай бұрын

Very nice build, would only turn those shocks back around.

@sitlos. 4 жыл бұрын

It would be cool to try to make a trx 4 low rider. Already one of the best, wonder if it could be done🤔🤔🤔😂. Great vid. Keep em coming my friend! 👍

@RCReviewChannel 4 жыл бұрын

That would be cool!

@mtkidrc2307 4 жыл бұрын

@RC Review There are a few chassis specifically designed around the TRX4 Portal axles. Brazin Scale ATL (All Time Low), North West Scale Designs (NWSD) Scattergun (however, they just released a newer one today that looks very well thought out!), TGH Sherpa, (edit: add the GMRC 2Timer to the list). Do some research on these and get your own build going!

@Tinkfan53 4 жыл бұрын

What did you use for the two body mounting pins in the back on the flatbed?

@garretdykstra9015 4 жыл бұрын

Arrma Mojave or kraton 6s which runs great on 4s. Just a hunch you would prefer those instead of something with a "stunt" label.

@leobanco597 3 жыл бұрын

thanks for this video. i just found a solution on how to mount my rc crawler body.for real..hahaha

@nitrocrew_ 4 жыл бұрын

Nice video I have 2 gspeed and a HH Sherpa great cheater comp 2 rigs now everyone will know the Norcal cheater rigs we build see you at Linda Vista....

@dragonflyjoyride 4 жыл бұрын

Now you can bring him back with his Class 1 build.

@rcvurooom8837 4 жыл бұрын

I’ll gladly come back or we can bring the man himself in. Gabe Flemming. Come check out the GSPEED FB page or KZfaq as well for information.

@dnafpv 4 жыл бұрын

Yes please

@hondofourfivetwo9347 4 жыл бұрын

All these TVP chassis style rigs are throw backs to the OG comp crawler rigs from the past they kinda sit between the past and the current C channel chassis scale rigs. It’s awesome but not my cup of tea I still prefer to keep the looks of realistic class 1 & 2 i.e. scale looking overall vs all out performance (I know that’s subjective considering what some 1:1 rigs look like) I’ve done the whole comp rig thing before and Scale is just where I’m at now.

@discusdog 4 жыл бұрын

At least its still a shafty...lol

@johnrobholmes 4 жыл бұрын

fellow comp crawlers unite! Not many people have seen a proper comp rig.

@jameslyons1978 3 жыл бұрын

Any soft metal can be clear coated will slide better

@sparkmastermeow6926 3 жыл бұрын

Hoping you can help, i am trying to follow this build exactly. I purchased the Salinas Design ODT V1, it's skid plate/motor mount is 84mm wide. The Team Garage Hack dual servo mount is only 67mm wide. I contacted GSpeed and they said "You can use those parts together but will need to use spacers so the difference in the spacers and skid plate is not more than 11mm" I have a 17mm difference. In the video i see he is running 70mm chassis brace, so he must have a much narrower skid plate than i received from salinas design. Any advice you can give on where i have gone wrong would be greatly appreciated.

@rccvs4355 3 жыл бұрын

Hi Francis, great rig, who makes the rear body mount? Love the idea no clips

@secret5. 4 жыл бұрын

The low cg is really cool. I want to build a kit around the hobbywing axe 3300kv but don't know what to get. I was thinking the trx4 but just can't decide.

@rcvurooom8837 4 жыл бұрын

Thanks. I’m not experienced with a TRX build, but check out the GSPEED FB page for inquires.

@HBFTimmahh 2 жыл бұрын

Those look like SSD Pro44 axles. Got a SSD TK (2 actually) adn a 3rd set of axles Im going to diamond pumpking up. May add the SSD Portals.

@morercthanclassy1543 4 жыл бұрын

I guys, great video, what type of hardcore links are they?

@aggercoastcustoms9364 4 жыл бұрын

what about the rear body mount 4 the dodge?

@charliemurray468 4 жыл бұрын

I love your vids but you should make more cinematic trail crawls that would be awesome.

@RCReviewChannel 4 жыл бұрын

Working on it!

@joseamaldonado6469 4 жыл бұрын

Does he have something inside the shock likens spring it doesn't extend much

@MrHart-fd1wf 4 жыл бұрын

What’s the wheelbase on this rig? 12.3”? 12.5”? Also, with the heavy emphasis of weight down low and forward, why not do a servo on axle compared to CMS where the servo sits higher mounted on the chassis. Great video and awesome build. Please post more build videos like these in the future. 👍

@rcmindset2876 4 жыл бұрын

You want it to be slick buy some skateboard wax. They used to use it for rail slides. It’s not wax but some compound.

@YouSoundButtHurt 4 жыл бұрын

Axial has the SCX10 III builder's kit available? I just see the SCX10 II kit.

@RCPropaganda 4 жыл бұрын

lol Spam. remind me of Joe Dirt. You might want to spray this down with pam ahaha

@wrhythm 3 жыл бұрын

Coat the brass and surfaces with graphite if you wanted them slick.

@BossNachoFPV 3 жыл бұрын

Im sure waxing the bottom would give a pretty decent slide.

@Truth_Spoken 3 жыл бұрын

How do you meet the C2 bed requirements with that rig? Or does your group not worry about them?

@jasonroberts5542 3 жыл бұрын

My traxxas trx4 bronco crawls straith up a wooden slick bord at 62°...i think he’s doing fine for trx4.

@marc9164 2 жыл бұрын

Awsome video, where can I get a flatbed for my GSpd like this?

@-Ola-. 4 жыл бұрын

Didnt mention total weight? Just built a very similar rig with trx portals ble 500 v3, stubby 2700kv... Loving it!

@rcvurooom8837 4 жыл бұрын

I’ll have to put it on the scale.

@danielsonhobbies 3 жыл бұрын

@@rcvurooom8837 hey Vu, awesome build!! Where did you get the rear body mount setup?

@jimmyravello8148 4 жыл бұрын

#gmrc is where its at

@808grapplemonkey 3 жыл бұрын

Question: Is it $500 a $1000 or $250? Answer: Yes

@michaelgravlund9194 2 жыл бұрын

They say 700$

@covecityboys Жыл бұрын

The hex is not rotational? The hex is attached to the axle and sit inside the rim and turns or is there a different hex you’re speaking of?

@hardlinelandco.3059 3 жыл бұрын

Who supplies the Rear Body Mount piece for the the Power Wagon?

@RCReviewChannel 3 жыл бұрын

salinasdesignconcepts.com/

@rccvs4355 3 жыл бұрын

Great rig Sir, question about your front shocks, since they're leaning backwards I'm guessing you have positive caster ?? Thank you !!

@traviskarrle503 3 жыл бұрын

where is that crawling spot in all of your videos 🙏🏼🙏🏼🙏🏼🙏🏼🙏🏼 I live in santa cruz looking for more crawl spots 🙏🏼

@shane0675 3 жыл бұрын

What is the wheel bace to this rig

@rcjoe406 4 жыл бұрын

Awesome build..but now those carbon rails are gonna be out of stock for awhile lol

@baxrok2. 4 жыл бұрын

That and most of the other stuff!

@rcvurooom8837 4 жыл бұрын

Keep checking on the GSPEED FB page or gspeedchassis.com.

@brent042081 4 жыл бұрын

Is that a class 2 crawler or class 3??

@juanlechuga9200 3 жыл бұрын

How much does it weigh? Looks like less than 2kg

@brianchong4134 2 жыл бұрын

Impressive rig, but how is this C2? Thats TVP chassis, no? This new breed of "belly dragger" is basically a comp rig. Amazing performance.

@mercilessradio1770 2 жыл бұрын

Hey dude, you wouldnt know a rim that is 2.2 and looks like those old 60s-80s steel standard rims would you?

@TheCaliforniakid72 3 жыл бұрын

what is the total weight of that rig?

@andrewlarcom9554 3 жыл бұрын

Almost impossible to find a set of klrs in any compound 😔

@ianteuscher9467 3 жыл бұрын

Same problem🤝😭

@pjtacdol7816 4 жыл бұрын

Good morning

@dunepred 3 жыл бұрын

No way $700 more like $1000 from the ground up

@danielkonrad1444 4 жыл бұрын

I love you Francis.

@proraptor4146 4 жыл бұрын

I really dont understand the carbon wheels....and yes those beef patties add rotational weight. This dude needs to install delrin links on his truck and he will be a lot happier

@peternorin8554 4 жыл бұрын

Basically most motorsports want low rotating mass, makes it easier to turn and spin up. If you ever held a bicyclewheel by the nubs while spinning it you understand.