Thanks for spending all that money and running the test. I'm sure a lot of us benefited from knowing which brands are true to their claims.

You do all these servo test but it's hard to remember which does which to compare, it would be great if you could do a round up at the end, and put them all in a bar graph with overall torque, sorted by power volt X amps, and also them sort for Oz per $ 👍

torques numbers were futaba 257 spektrum rc 351 promodeler 391 hitec hsb 506 savox 513 tekin 530 protek 552 savox 223 570 reefs 555 661 holmes 681

Thank you for taking the time and effort to test all of the top dog servos. This is the one upgrade I do to all of my rc’s over anything else! 1st mod of every build...

Appreciate all you do for the hobby Francis. Ordered the Reefs through your Amain link!

This is great edition to the series ...this is all the marbles I know there are other servos you have not covered but this was great...Thanks..

Man so glad to be a subscriber of this channel.I love these servo testing videos.Thank you so much :)

Very informative and useful! really opened my eyes to how much current these high torque servos actually pull. I've always assumed 3 or 4A were the maximum at full torque, but seeing 7A...Wow! Makes it easier to choose a BEC as well.

I really appreciate your review. Saved me a lot of money and time. I love all your videos!! Thank you.

Just ordered a reefs 555 and castle bec. Thanks for your review👍

Thank you for posting this video, I’m gonna share the heck out of it!

The tekin was crazy quiet. Cool video and nice to see someone testing all these for us.

My 1st RTR when I got back into RC was a Redcat Gen 8 Axe, and ever since Reefs has been my go to for servos, and Hobbywing for ESC and Motors. I have to Admit I have been thinking about building a purely Holmes Hobby crawler just so I can compare the two top dogs, at least from the word on the grapevine. Maybe on the SCX10iii chassis. I will add a Thank You, if I haven't already because your review was the tipping point on my 1st RTR and I still think my Axe is the best RC I Own, I did ungrade to an AXE FOC R2 540L 2800KV, for the wheel speed, extra punch, and for the dual mode to also use as a trailing truck.

Awesome ! Wanna see some more HDPower servos 🙏🏼

good stuff, thanks for that i like your set up professionally done cheers

Thanks for all your good work, very interesting.

Great video, I’m curious as to why my Futaba A700 “1000oz” servo actually would test at.

Thanks for sharing and ... One of the best Chanel!!!

Thanks for taking the time and producing real life data

Have you seen the Boom Racing Python servo made to be axle mounted? It doesn't have tabs on the ends but has one rail down the side to mount directly to the truss or an adapter bracket. It looks very streamlined and waterproof with a 45kg rating. I guess you would have a problem trying to use your rig to test it but I sure would like to see how it compares. You guys are doing an excellent job and I thank you for spending the time and presenting it for us. Have you thought about how to check the calibration of your rig? It wouldn't be hard to put a pulley up at the top and a pulley at the edge of the table to hang calibration weights.

This is the best crawler channel on youtube

I have found a very cheap, powerful, and fast brushless servo for 23 dollars!!!!!!!!!😮 Gx 42kg brushless servo on ebay. It is unbelievable for the price. It blew my mind... I've ran it at a race this past weekend, and it ran flawless. Very strong, and centered very well. Hope you reveiw it one day! Great video!

Thanks.👍 I like the hitec with the hi price just because it's so quiet.

Hey Hey !!! merry Xmass my man , I just wanted to let you know how much I appreciate this test , I ended up buying the Holmes hobby servo you tested!!

Mines the Holmes hobby one but I have the version 2 it’s been a good servo !

Finally a video where I can actually the servos being tested

Outstanding work!!! 👍

Great test thank you very much!!!!

Rc review , I would love to see you guys test the reefs 777 as i just bought one. My friend went with the raw 500. We are both pleased with the strength and speed of the reefs and at that price point there is no comparison.

Thanks for the work! A chart would be nice.

Holmes Hobbies!.... Nice... Plus we get to see the owner... He is a cool dude...

Very helpful...Thank-you!

Wow... Pretty impressive results, dude!!! 😮 Could you please test some from Banggood? Any brand, really... Because it's my only option to buying stuff here. 😕

Been using Bluebird brushless titanium alloy geared servos for my 1/10th and 1/8 crawlers and they have never failed me. I suspect they will last forever. Also have some Savox which are equallly good but more expensive...

Homes Hobbies and Reefs make some nice products.

Thank you 😊 Very helpful!

These are so helpful!! I really like these test, As I am looking for a servo to replace my stock X Maxx servo. I’ve found a few other servos that I wish I could get the true specs of like this test your doing. Hitec/RCD 36845 Hitec D845 on ebay for $108.00. JX Servo HV734MG on eBay for $50 to $60, Reefs 500 High Torque for $130.00, PowerHobby 76MG for $110.00 and the Savox SW-2210SG for $100...

Thank you very much my friend.. you are awesome 👏

I like the G13. From 3 Brothers RC running straight from a 3s battery.

You need to factor in the current draw. Some are drawing 8 or 9 amps to make that torque which they may not have when connected in RC system. Some also get hot and then perform a lot differently. In many applications it is about repeatability and accuracy more than max torque.

Thank you, thank you.

Can you test some ProModeler servos

excellent ! thanks for that info

My favorites are the Reefs 555, Protek 370TBL 650oz and the Holmes SHV500. You honestly need to test the new Holmes against the 3Brothers RC direct current servo.

Sure did enjoy this💎😎

What an awesome test! I actually saw this video a year ago, but re-watched it because I am looking for a new servo now. I noticed the hitec servo really had low amp draw, is it because of the regeneration feature? Also, does this hitec servo with regeneration (current back flow) feature cause problems with electronics like the castle esc’s or othe esc?

I would like to see you test the power HD lw25kg. I ran mine hard all summer and it held up great. It really shines with a cc bec set to 8.4v.

Yay just purchased my Holmes hobbies shv500v3!

With a bunch of them you see a downward trend due to heating up. It would be interesting to see how servos hold up with repeated pulls over an interval and where they stabilize. Something like 20 or 30 pulls, 10, 15, 20, 30 or 60 seconds apart and see how their performance changes over time.

I got a Savox 1231SG in my TRX-4. The traditional Savox hum is mostly benumbed by the stereo headphones I usually wear. I don't know if it achieves its claimed 444oz at 6.0V but it rarely suffers a 'stall' while crawling my 7+lb truck. It's NOT rated waterproof, but at $69.99 on Amazon, I don't much care being I live in the Ca. high desert. I may buy one for my RR10 Bomber if the OEM servo ever fails.

I was a fan of JR back 20 years when I was racing qscale. Are they still around and good quality?

I recently bought the Reef Triple5 and I love it, I actually think is it waaaaay too much xD

We can assume the comparison of outputs between tested servos but the values we should take at face value. Also note that if one wishes to invest in a stronger servo one should also consider the investment of replacing plastic steering components with metal ones as the strength of some servos quickly flog steering components to consistancy of soft ice cream.

Great comparison servo vid. Want to know your thoughts on the futaba hps cb700 servo. Thanks

Great Video. What would you get for the X maxx?

Which micro servo would you recommend for the trx4’s?

I would like to see a test on the reefs raw500

Shot in the dark with this question really need an answer PLEASE. Will running the blue Savox h2o proof servo blow my trx4 ESC out, even if I'm running a castle micro x and castle 2.0 BEC at 5.4 v? Appreciate any help before i install it.

thank u for the information

Would like to see where the actual rating is for the Reefs Raw 500. I really like it. Very quiet and really fast as well

also, why testing at 8.4v if it's not recommended to run these servos at that voltage?

Hi; Thanks for sharing all the info and clearing up some of the claims out there. I looked at the SAVOX SB2230SG site and they run it at 7.4v. You did it at 8.4v @ 41.6kgs if I am correct. Can you check it at 7.4v as they claim to have a torque of around 580 oz and give me an answer if it still stands up to the test.

How come the Holmes 550v3 is tested at 10V?

What about all the noise from them? What was the quietest?

Great video! What happened to that Element body your left :)

i want to ask that can i use MG995 servo motor on 7.4 V , will it burn ? or work normally ?

What steering servo would you use for the X max truck I keep blowing out the 2085X steering servo every other time I drive my ex Maxx truck

Very good info. A video on how you put together your testing jig would be good too. Why did you not just connect the servo output directly to the fish scale?

I seen you had a JX Hv servo in the line of servos to be tested in the video, but never tested it? I have 3 Jx Bls7132 HV servos they are supposed 5o have 32kg at 7.4. If you have this servo, can you test it and tell me the results? Thanks great video!

Any recommendations for a quality servo that is fully compatible with a stock Kraton 6s RTR?

Big thanx for all the servotest you put alote of money on, a huge thanx fore the rest of your videos to ofcours. Do you have av Futaba HSP CB700 sbus2 that you maybe can do a test on? (Sorry for my english its terrible) but i hope ju shild understand me. I have one of that servo and i am realy happy whit it in my trx-4 Defender butt i want to know the truth about it. Great chanel i give you five of fice tumbs up 👍🏻👍🏻👍🏻👍🏻👍🏻

I bought the Powerhobby 300BW for my plane. I can say. I am impressed. Smooth and fast and powerful. Who makes those servos for them? $49 too. I do think AGF servos are low resolution.

Can you post a list of these servos and their results?

What about the 3 brothers g13?

Is the Hitec at 2:40 really only drawing 1.8 amps at max torque? That's a few times more efficient than the other ones. How do they do it?

What steering servo should you use on the Xmaxx RC truck my 2085X keeps blowing out every other time I use it should I use the savox 2290

Great info! Do you have this for cheapo servos also? I have been using the ZOSKAY 35kg servo with great results! Subscribed!

The 3 Brothers seems to be the best deal in premium Servos... No need to announce the Savöx - the NOISE gives them away!! 😜 Carmine ✈🚂🚙

I found a redcat gen 8 that was half submerged in the mud in a stream. It had obviously been swept downstream and it was there for awhile because it was oxidized to hell. Everything was completely waterlogged.The Savox servo still works and as a matter of fact I still use it in that same redcat after rebuilding it. Testament to quality ?

Hi, Which is the best servo for traxxas trx4 defender?, which one do you recommend?, thank you

I just bought the axial scx pro with the kraken Cassie what servo would you suggest? I will be doing some small competitions but mostly trail runs thx.

What's the torque rating for the 2230 savox at 6v? I'm running the traxxas 2250 at 6v, because I don't want to harm the other servos, and it keeps stalling. I know your video shows it around 260 oz in of torque iirc and most of the 100$ servos you guys tested at 6v wouldn't be a worthwhile upgrade. I already have a jst lead off my trax-ass id plug to power the lights since I'm running a mamba x and would love to have gotten the shv500v3 but those are harder to find than a monk playing craps in atlantic city. And while I don't care for the savox noise, the mamba x is already loud and I want something reliable and strong. But I'm stuck at 6v because.

Hi, how about AR servo, do you recommend?

Will the sb-2230sg fit in a trx sport?

Tekin are the best! Very well made and totally silent with any amount of load!

no protek 370tbl?? thanks. Mine failed after 2 months... :(

That reefs 555 looks like the best deal of the bunch! thank you, spending your hard earned money 💰 💵 💰 So we don’t have to 😃

Hi can you tell me which one I have to buy I have RC car hsp Wolverine 94111

FC...Awesome effort. What voltage was the Holmes SHV500V3 tested at? Could not read the voltage meter with the banner running across it. Thanks.

The savox squealed like it was getting killed. I find my various savoxes to be usually loud and annoying. Surprised that the spektrum, Hi-tec and tekin were so quiet! I know what i will buy next.

The tekin did not make any noise. Is the sound muted or is it really that quiet?

Is the reefs Raw 500 good an will fit n a kaiju? N do I need a BEC?

Hello, i have the hobbywing xr8 SCT ESC with the built in 15amp bec. Could that esc handle two high torque jX servos for a monster truck build? and I have lights too. thank you,

any thoughts on the Pro Modeler line of servos? Great series and channel, thanks a ton:)

So, sir the final verdict for the best servo in a scx10 III?

I want known who is the winner... And mount then in the mc8..

Last one at 10v was beast

And what is a hitec hsb-0380? Did you guys mean 9380?

Fkng beautiful!👍👍👍👍

Can you please test the Sanwa PGS XR2 Servo?