RD350LC Engine assembly part 1

Рет қаралды 35,521

4 жыл бұрын

First part of the Yamaha RD350LC engine assembly.
Music:
Classic Rose 2 by Vibe mountain
Clover 3 by Vibe mountain
How about Nah by Roljui
Lost Time by Eveningland
Nightingale by Eveningland
Palmtrees by The brother records

Пікірлер: 37

@mikeford5106 3 ай бұрын

First class work!

@steveosborne8139 10 ай бұрын

4l1 250 casing with 4l0 350 top end. Very nice job you did.

@kennymcquinkiss8292 2 жыл бұрын

Thank you for sharing. I'm hopefully going to be putting my newly acquired rd350 motor together and this video has been a great help thanks again

@jh-tech5546 2 жыл бұрын

Thank you. Have fun on your RD and take your time.

@rayconroy9190 Жыл бұрын

Great stuff, busy stripping a 1973 rd350 American import, gonna check everything once the crankcase are separated, thanks for sharing your knowledge.

@jh-tech5546 Жыл бұрын

Thank you. Have fun on your RD!

@FuquarProductions Жыл бұрын

Man, I could have used this in 1994 when I put one of these together..... I will be working on the same project bike this winter replacing the crank that it needed in 1994.

@jh-tech5546 8 ай бұрын

Good luck and enjoy it.

@blkdna748 2 жыл бұрын

Clean rebuild. Hatsoff.

@travelladdict5138 3 жыл бұрын

Good work and im ready to share your neat work and full support for your channel from my side

@frederichannon9366 4 жыл бұрын

Hoe super cool is dit....:-)

@andresoares6908 Жыл бұрын

Top !

@joseignaciozapatazapata4975 3 жыл бұрын

Buenas noches hablo desde medellín Colombia

@joaodomingosdecastro8 2 жыл бұрын

Muito bom

@johnnynewburgh9745 2 жыл бұрын

video looked great..would love if you had audio of doing work

@joseignaciozapatazapata4975 3 жыл бұрын

Cómo puedo conseguir repuestos para una RD250 GRACIAS

@RockOn74 2 жыл бұрын

Hi nice video! Do you know if it is the same approach and parts to the 31K ypvs models? //Kind regards Klas

@jh-tech5546 2 жыл бұрын

Thanks for your comment! Yes I think it is pretty similar. Apart form the clutch actuation and the top end.

@richardcranium9887 2 жыл бұрын

Nice to see an LC engine without the numbers filed off :/

@jh-tech5546 2 жыл бұрын

Unfortunately not matching with the frame. But the bike looks and rides as good so not a big problem :)

@vinm300 2 жыл бұрын

Great video. 5:24 why was only one side given a semicircular strip seal ?

@stevew6031 2 жыл бұрын

It's not a seal, it's a bearing locator/retainer. It fits in a groove in the bearing & lower crankcase.

@viggowiberg 3 жыл бұрын

Hey man! Just got a RD250 which needs some small work but i have no idea where to buy parts for it.. So I was just wondering if you could recommend any website where I could buy parts. Thanks!

@jh-tech5546 3 жыл бұрын

Hi, I bought original parts at www.cmsnl.com, and some other parts at yambits.co.uk, www.pjme.co.uk and www.rdlccrazy.co.uk

@user-kc1qk7hv1y 3 жыл бұрын

Hello, what kind of glue do you use to secure the screws? Thank you for answer.

@vinm300 2 жыл бұрын

I would guess Hermetite. It comes in many colours : for alternator bolts I used Red Hermetite. For minor fixings I would use purple.

@user-kc1qk7hv1y 2 жыл бұрын

@@vinm300 Thanks. Great video about the complete assembly of the engine !! I will completely assemble the engine and the motorcycle and I am thinking about what glue I will use to secure the screws so that they do not come loose. I bought an adhesive from the LOCTITE 243 brand. Loctite offers 3 types of adhesives. With low, medium and high strength.

@robertosansoni4421 3 жыл бұрын

Is the gray sealant you used to seal the engine silicone or anaerobic? Do you put thread locking sealant on the crankcase bolts?

@jh-tech5546 3 жыл бұрын

I don't realy know if i's anaerobic but it's not silicone based for sure. No, i did't put thread lock on the canckcase bolts.

@robertosansoni4421 3 жыл бұрын

@@jh-tech5546 What brand of sealant do you use?

@robertosansoni4421 3 жыл бұрын

@@jh-tech5546 For the engine of the 2UA I used the red sealant, I must say that after more than three years nothing has happened.

@Atupaitea Ай бұрын

some of rd have 4 shifter forks, is there another model?

@jh-tech5546 Ай бұрын

Sorry, I don't know of any model with 4 forks. Maybe older RD air cooled model?

@michaelj.kastner5165 2 ай бұрын

Parts from where? Time Machine back to 1975?

@jh-tech5546 2 ай бұрын

Mainly YAMBITS and CMS NL

@grahamlangston2101 4 ай бұрын

The important bit is not showing on this video lining up the 4 tits on the crank bearing to the housing if you don't get this right your end up with cracked bearing many people have

@jh-tech5546 4 ай бұрын

Correct. Thanks for the comment