READY FOR THE FIRST FLIGHT, 6 Meters C-17 Globemaster RC airplane

Рет қаралды 1,011,132

3 ай бұрын

Watch the first flight here: • Worlds biggest RC C-17...
4 months is the making, I'm super happy with how it turned out.
Stay tuned for the maiden flight next Monday!
Support the channel on Patreon: / ramyrc

Пікірлер: 1 200

@RamyRC 3 ай бұрын

Stay tuned for the maiden flight next Monday!

@Radowanhossainsajid 3 ай бұрын

Bro make emirates 777 and use turbine engine not ducted fan ❤❤😊❤😊❤i know u can make

@UK_Adventurer 3 ай бұрын

can't wait! awesome content!!!

@Dailyplugs229 3 ай бұрын

Next challenge: Make one of your rc planes totally automated from takeoff to landing 🔥 It’s going to be an exciting project I promise you 🔥

@aerialbugsmasher 3 ай бұрын

@@Dailyplugs229 no. that's idiotic and defeats the purpose of flying RC planes.

@aerialbugsmasher 3 ай бұрын

@@Radowanhossainsajid his boss has a hatred of turbines for some idiotic reason. such a waste, all his models are begging for turbines

@leokimvideo 3 ай бұрын

I'm certain he's going to ride this into the air like a incredible magic carpet

@Dan-yk6sy 3 ай бұрын

r/whywomenlivelonger

@pilotprogaming8202 3 ай бұрын

@@Dan-yk6sy💀💀

@MatthewCrawford0 3 ай бұрын

Hello Ramy! When it comes to the battery and electronics latch, you could have considered a redundant design where it opens in the opposite direction, thus meaning a failure of the latch wouldn't lead to it flipping open mid flight as the air flowing over it would keep it more-or-less closed. Just my thoughts. Fantastic build regardless!

@jovanblackman2608 3 ай бұрын

My thoughts exactly. The hinges should've been on the opposite side.

@user-mx3uc8mk7c 3 ай бұрын

I agree. With what he flies I was surprised thT put the hinges on the rear of the hatch.. Fred Weaver

@fanflv 3 ай бұрын

i think he did that for better access from the front,not having that door in the way to get inside

@donanders2110 3 ай бұрын

I made the same comment before seeing yours! I agree!

@Orion40000 3 ай бұрын

@@fanflv This guy has skills that I can only dream of as a large-scale scratch-builder, so I assume that he had a good reason for hinging that access panel at the back. But nothing about that board/battery tray would need to be hinged at the rear for access purposes, even if he was planning on modelling a cockpit. I'd love to hear from the man himself, (and I doubt I will) but I would guess that it was to increase the width between the hinges for strength? I need to know, because ths really seems like a nonsensical choice.

@realflight1572 3 ай бұрын

Thank you Rami for the magnificent plane. I live in Ukraine and before the war I was involved in aircraft modeling; I learned many interesting techniques for building aircraft models from you. Now I can’t launch model airplanes because of the war, but I don’t lose heart and watch your channel and rejoice at your successes. Thank you.

@DEADB33F 3 ай бұрын

Is there not a huge market for folks with model aircraft & drone building experience in Ukraine right now?

@ShuRugal 3 ай бұрын

I don't know your situation or how close you are to the fighting, but from the widespread usage of RC drones for this war, I'd wager you have a real opportunity to make a difference for your fellow countrymen. Even if your circumstances preclude your direct participation, you could probably make a difference offering your services in training troops in the maintenance and use of RC drones. Either way, shitty situation, wishing you the best of luck, and voting to keep my nation's leaders on track supporting your nation's defense. You guys got this, and we've got your backs.

@mateuszl7890 3 ай бұрын

Man, you have perfect opportunity now! You can bulid drones and help your country ;)

@rjm7151 3 ай бұрын

@@ShuRugal Not the place for misguided political opinions. Colonel Douglas Macgregor

@ShuRugal 3 ай бұрын

@@rjm7151 misguided political opinions? The man's country is being invaded. If you don't like hearing about it, then go crawl back under your rock.

@Norminal1 3 ай бұрын

I’ve been flying RC for over 42 years and always thought about building a plane big enough to lay down in. Funtastic work guys. Can’t wait to see it fly and see what’s next.

@malcolmdeboo3794 3 ай бұрын

They sell seats on actual flights pretty cheap 😂😂😂😂 what a muppet . Did you not have toys as a child

@b.v.6077 3 ай бұрын

Would love to see if you use some jetcats Or build a one mancarrying congcord Queenof the air

@b.v.6077 3 ай бұрын

Dont think about it dreams only have one reason inspirieren the dreamer to bring it real

@snoozy8456 3 ай бұрын

next project: building an actual airplane

@shelbyseelbach9568 3 ай бұрын

Every plane he has ever built is an actual airplane, my friend.

@AK2I47 3 ай бұрын

@@shelbyseelbach9568 an actual scaled up version

@snoozy8456 3 ай бұрын

@@shelbyseelbach9568 true but a humain flyable one

@shelbyseelbach9568 3 ай бұрын

@@AK2I47 Actual? Scaled up? All planes are models, no matter the size, whether they can carry people or not. It just amuses me when people say "real plane" or "actual plane" as if a remotely controlled plane at any scale is somehow a fake plane. No big deal.

@shelbyseelbach9568 3 ай бұрын

@@snoozy8456 This plane will be flown by a human, every time it flies......

@VectorX2712 3 ай бұрын

14:20 This is some serious power!💀🔥

@raptorsean1464 3 ай бұрын

I think they better use at least 3 people to hold that plane back to test the thrust! Possibly 4, 1 per engine.😮😅😂

@drewcagno 3 ай бұрын

I jumped out of a C-17 over northern Iraq in 2003, so ive got a bit of a soft spot for this aircraft. This model is AWESOME! GREAT WORK!

@ytsjcuser 3 ай бұрын

I hope you stopped by my FOB. I was working an airfield in northern Iraq in 2003. My guess is that you passed through FOB Warrior at some point. Best DFAC in the AOR... Not even kidding about that. Thanks for your service my brother in arms!

@user-ik3mk5vi8m 3 ай бұрын

Is this a C17 ?

@paulmorrow8372 3 ай бұрын

Amazing build, and thank you Mr Perry for letting us follow along with this build.

@manassehitegi 3 ай бұрын

This has to be among the largest and most powerful rc plane in the world rn, Rammy, Perry and the team are really doing a great job... Watching from Kenya 🇰🇪

@stwright84 3 ай бұрын

The original large scale C-17 uses gas turbine engines and is much heavier, so it is more powerful. This is a great plane as well

@jespermikkelsen4416 3 ай бұрын

Amazing project! That top-hatch WILL open at some point, WHEN the latch fails. There is lift along the top, and you will then get a giant speedbrake. With your experience there must be a reason for hinges aft. Good luck!

@JoseArzacSolis 3 ай бұрын

Yes, I was wondering the same thing. What is the reason for putting the hinges aft?

@relentlezz 3 ай бұрын

Closer to the center of gravity maybe?

@ScarabChris 3 ай бұрын

I 'm not an RC plane hobbyist or in aviation and I thought the same. My guess for the aft hinge is because if it opened forward it might get in the way while doing work in the plane. I think a front hinge with the ability to easily remove the entire hatch when doing extensive work inside would have been a good compromise.

@MickB235 3 ай бұрын

I think the shape of the hatch is dictating the position of the hinges

@CalMariner 3 ай бұрын

Good point. Whatever the latch, should be backed up with a short safety cable or secondary latch, like a car hood.

@Lithonion1 3 ай бұрын

Your craftsmanship and builds never cease to amaze me. Each build always seems better than the previous.

@glenndelconte2648 3 ай бұрын

Put the hatch the way you want it. When it is locked, it will be locked! You are so very Talented, and fortunate to work with Tyler. You guys might be an hour away from me. I put my first 14 ounce LJ-50 (Learjet) in the air in 2001 and here you are 23 years later, making a plane to carry animals around the North Georgia mountains! Best wishes on all you do. God Bless.

@thehazbinpilot 3 ай бұрын

The C-17 taxiing sounds a bit like an IL-76 or 62, holy smokes! Amazing as per the usual Ramy, never failing to amaze me

@mracer8 3 ай бұрын

Is the jet engine even install? I thought the C-17 is taxing around from those power wheel set you tempory have underneth the plane? 9:40

@ipadize 3 ай бұрын

@@mracer8 these are electronic brakes not motors

@theoriginalrabbithole 3 ай бұрын

This has got to be the ultimate R/C flying gig of all time! A passionate, expert R/C enthusiast with an unlimited budget and time to create and fly planes, most R/C fliers could never dream of building and flying. Bravo! Can't wait to see the first flight. 👍

@Craig_Ewan 3 ай бұрын

The fact that Tyler Perry commisioned Ramy to build him a one off C17 is just the best thing. Who woulda ever thought we'd see this collab 😍 what's next?!

@emanuelcosma8329 3 ай бұрын

that's the way to start a week, got the food for lunch, got back from university, have some spare time before exams, Ramy dropped new video, life's good man!

@osomeric3277 3 ай бұрын

Swrs Man 😅

@jasonrc5240 3 ай бұрын

sir your builds are killing me, sir you are so so talented... I wish I can view the madeian flight... keep pushing sir.. the sky is already your home...

@rytiski 3 ай бұрын

Big bro Tyler got a new hobby! Forget them haters. We're in a different realm.

@sambuvca22 3 ай бұрын

Ramy is so skilled. I love the modeling part of the hobby but you got to learn patience. Just painting the aircraft takes so much time!

@outermarker5801 3 ай бұрын

Incredible work as usual Ramy! Shout out to Mr Perry, what a gorgeous property, looks like a peaceful place to be and enjoy flying. Can't wait for first flight upload, then completion when real gear and livery applied!

@mkroeseler 3 ай бұрын

Thank you so much for thes new Video Ramy ! ❤

@AVOWIRENEWS 3 ай бұрын

Wow, a 6-meter C-17 Globemaster RC airplane getting ready for its first flight sounds absolutely thrilling! The C-17 Globemaster is such an iconic aircraft, and seeing it replicated as a large-scale RC model must be a remarkable sight. The engineering and skill involved in creating and flying a model of this size are truly impressive. The anticipation of the first flight adds an extra layer of excitement. I bet the experience of watching this model take to the skies will be unforgettable! Wishing smooth skies and a successful maiden flight! 🛫✨

@MrPeyregne 3 ай бұрын

Rami you are the man! I have learned some much from your videos and Thanks to Tyler for making this happen. Good luck next week.

@michaelkennedy7709 3 ай бұрын

The build and size of this thing itself is already crazy. But those electric turbofan's power and thrust is unbelievable to think how strong and powerful they are.😲

@SimiSimington 3 ай бұрын

Next Project: Build a Plane to actually go inside the cockpit

@BobbyTucker Ай бұрын

Did you mean to put the Plane inside the Cargo hold? lol

@jweiselii 3 ай бұрын

Obviously, this is your business; not just a hobby. I am retired and have an outdoor G-Scale railroad with battery powered engines and radio control. You are light-years ahead of the model railroad industry. Absolutely amazing process to watch. Thx.

@smooth-juice10101 3 ай бұрын

Wow. Need lines on floor and a cab to sit in and then fly. Fantastic job. Love it.

@JohannNorris 3 ай бұрын

Now we need to stick a seat right in the centre of gravity and then you gotta sit on it and fly on top of it. Great job awesome. for the big day maiden flight ✈️ 😂😂😂👍👍👍🇨🇦🇨🇦🇨🇦

@cloudstreets1396 3 ай бұрын

I remember not that long ago your models were made of foam board and covered with shrinkage plastic film. Look how far you’ve come!!!

@thundervusn 3 ай бұрын

Dear Ramy!No words..... Ramy on a magic carpet !!!!!!Congrats on living a dream, beautiful work!!! I am watching you from the begining, it is nice to see your path, so many nice models and so much joy and no words on advancing in technology!!All the best Ramy enjoy!!!

@randallfawc7501 3 ай бұрын

Remy.... That is absolutely AMAZING! Great work and creativity!!

@edwinthomas618 3 ай бұрын

EPIC. I bet Tyler will be nervous as heck when he maidens it

@rjung_ch 3 ай бұрын

12:07 Tyler looks really happy, he must be impressed by your talent Ramy!

@ronnienutter529 3 ай бұрын

if he wasnt impressed i dont think hed fly him around the world to build this lol..but he is the most talent builder ive seen so far

@jessejimenez8150 3 ай бұрын

Thank you Ramy, looking forward for the next built!

@boldrbangr9834 3 ай бұрын

Thank you for bringing us these beautiful aircraft!

@bruces1g 3 ай бұрын

That shop! Beautiful paved runway! An RC modelers wet dream! Such a far, far cry from the old Goldberg balsa 3-4 channel planes I used to build . Makes me feel sooo old!

@jamesbizs 3 ай бұрын

Lol an actual pilots wet dream

@Dochorahan 3 ай бұрын

I think this is Tyler Perry's runway that he shares with Remi. Great duo for the RC community.

@missyandjoey 3 ай бұрын

Watch the FAA notices this! Lol. Amazing job fella’s!

@shaunmcdaniels2460 3 ай бұрын

Wow!!! That is incredible craftsmanship!!! The airplane is simply amazing!!!

@pricelesshistory 3 ай бұрын

Me and my friends built this too, used 4 jets instead of ducted fans, Kevlar composites on aluminum structure, hydraulics here and there with electros. Getting the landing gear to look right was a pain! It was a HUGE 1:1 scale! Really turned some heads. What a ride! Amazing job with yours!

@resadrecebli2263 3 ай бұрын

Ramy to A380 : I can sit on it! Ramy to C17 : I can taxi on it! Ramy to his next project : I can fly on it??

@jesselopez0008 3 ай бұрын

peter sptripol joins the team

@muhammadridwanfirdaus9223 2 ай бұрын

Can the plane fly with you?

@WyattMarshall-nq6ct Ай бұрын

Fr I would just lay down on the inside of it lol

@Negev-Israel Ай бұрын

@voornaam3191 Ай бұрын

Does he have a war head?! No, he has a normal head.

@multirotormanish7220 3 ай бұрын

I have no words, Excellent work Ramy!!!

@akalaification 3 ай бұрын

You have come soooo far in such a short time. I'm sure it felt like a lifetime, but few achieve what you have done. You are an inspiration.

@tonycamplin8607 3 ай бұрын

It's looking great, what a fantastic 'plane, can't wait to see her flying. That hatch, why didn't you hinge it at the front so that it couldn't fly open. It's such a obvious thing to do that there must be a reason why you didn't.

@aeronaut1906 3 ай бұрын

I love the anhedral wings on the globemaster. Pretty sure they’re there to reduce static loads because it can’t roll unless there is an instability. I wonder how those aerodynamics scale to RC.

@creativealtone 3 ай бұрын

Awesome!!! So inspiring! Thanks for sharing!

@christianbenzinger770 3 ай бұрын

I remember that was 8 years ago. There I enthusiastically watched the video of a Ramy who built an A330-300. Even back then I was excited and subscribed to your channel. I think you still had around 300 subscribers. I have been able to witness how your model and your channel have continued to grow and I would just like to say thank you Ramy. Thank you for the 8 years in which you built so many models, even having to bleed here and there when you crashed. Thank you Ramy and many greetings from Bad König. PS Ja klar hätte ich es auch in Deutsch schreiben können aber dann würden alle Englischsprachigen Abonenten nichts von haben was mir auf dem Herzen lag.

@underbird 3 ай бұрын

Awesome. Gonna be a lot of low pressure on that hatch

@Bob_Burton 3 ай бұрын

I was surprised that it was not hinged at the front rather than the back

@darrinswanson 3 ай бұрын

Why would you not hinge the hatch at the front so airflow will prevent a catastrophic event in case of latch failure?

@PrestonVanLoon 3 ай бұрын

The hinge placement seems like a really silly decision. It's not too late to fix it!

@randomnickify 3 ай бұрын

Hatch will be blocking access to the interior, it's almost at the wings level.

@darrinswanson 3 ай бұрын

@@randomnickify I don't see how placing the hinge point on the forward edge of the hatch could possibly limit access any more than the current configuration. What do you mean?

@rhdtarga1a192 3 ай бұрын

Remy has built most of his planes this way. He must have a resin.

@Clownworldmatrixviewer 3 ай бұрын

Absolutely inspirational ‼️

@FotoCreatives 3 ай бұрын

Build like a (beautiful) tank! What a plane Ramy. Can't wait to see the lovely finish on this one....grey color and markings all over.

@UKMike2009 3 ай бұрын

Yes, I think you have enough power for flight! Outstanding work

@robwagner4615 3 ай бұрын

That is absolutely AMAZING!!!!! WOW RAMY OUTSTANDING!!! 😮

@imbok 3 ай бұрын

Man, my hat's off to you and the team. Y'all knocked it out of the park with this one. I'm sure it's a good flier.

@Insane823 3 ай бұрын

I get exited every time a new Ramy RC video shows up. Keep up the great work and awesome planes.

@JH-ck1nr 3 ай бұрын

Simply amazing, cannot wait to see it fly! Awesome.

@1971VoiceoftheMummy 3 ай бұрын

Nice work! It was great to see the special gear get installed. And then the maiden flight. Awesome

@TheBobby416 3 ай бұрын

Thank You for sharing. ❤

@fnitschke21 3 ай бұрын

Awesome, great work. I've been following your work for a long time and I'm always impressed. I wish you all the best for your maiden flight.

@anthonycapanas2932 3 ай бұрын

Well done Ramsey. When you and your crew was taking the c-17 out of the hangar, the lighting and interior look like a full scale assembly line production with roll out. You even had to wing walk the aircraft for clearance at the doorway because of its size. It’s all about teamwork that made this project possible. Can’t wait to see as it lift off on first flight. Plenty of power for flight.

@jimratliff2753 3 ай бұрын

What a shop, what a talented group and what a plane!

@flyingwing1 3 ай бұрын

Amazing work, congratulations.

@charlescouncill 3 ай бұрын

I am “chomping at the bit” waiting on her maiden flight!! You guys have made an awesome plane!! Blue Skies!!

@merlavery5057 3 ай бұрын

Absolutely amazing .

@philb1167 3 ай бұрын

So impressive, ..... and so much fun!! I'm grinning just watching it!

@shanekennethjamesaustin3949 3 ай бұрын

What an incredible work of art! You must be so proud of the build & fit of this machine. It is a credit to you.

@dinodinosaur2930 3 ай бұрын

👏🏽👏🏽👏🏽👏🏽 That's wonderful workmanship

@tcon1479 3 ай бұрын

Incredible work

@DakaEditzz 3 ай бұрын

Wow this is an insane build respect

@robc.5745 3 ай бұрын

Your planing and work is amazing!

@jimmarburger611 3 ай бұрын

Wow, awesome build Ramy.

@Airman_Fu 3 ай бұрын

Awesome build, looking forward to seeing it complete.

@stevestonrcguy5393 3 ай бұрын

Awesome, beautiful location as well👍

@Freysn 3 ай бұрын

I'm so hyped for the maiden flight, can't imagine the pressure not to mess up but you got it!

@MikeJamesMedia 3 ай бұрын

Awesome! Good luck with the maiden flight of this beast!

@mickboakes7023 3 ай бұрын

Words fail me Ramy. Brilliant

@prospect8696 3 ай бұрын

This guy is an artist. Nothing short of amazing.

@JeffsCustomRC 3 ай бұрын

AMAZING!! Beautiful work Ramy👊🏼👊🏼

@derjoh1986 3 ай бұрын

Your skills has blossomed over the years! Very impressed. Well done.

@DonDegidio 3 ай бұрын

Hi Ramy, Awesome taxi tests. Good luck on the maiden flight.

@Spr04MQ 3 ай бұрын

@Ramy, outstanding build. Make this aircraft FPV ready, so that you are not attaching runcams to the outside. The view from the cockpit would be amazing.

@FredWhosDead 3 ай бұрын

Great work Ramy and team. She’s looking good.

@shanesdiy 3 ай бұрын

Oh man! That takeoff teaser at the end gave me goosebumps! Can't wait.

@supercat380 3 ай бұрын

Well-done on building this excellent model, guys!

@sand450rstar 3 ай бұрын

That is so awesome! You build some truly great aircraft!

@tiemji 3 ай бұрын

Beautiful!! Eagerly waiting for the first flight

@glenb785 3 ай бұрын

great workmanship as always ,cant wait to watch the maiden-good luck guys

@koiyujo1543 3 ай бұрын

so awesome you guys have your own runway

@FlyTimeRC 3 ай бұрын

This is just a amazing plane. Great work!!!

@garyclark24 3 ай бұрын

It’s crazy how good this man is at his trade, a true master of his craft

@Rich77UK 3 ай бұрын

That is super impressive!

@BobbyTucker Ай бұрын

I can see you and Tyler both being perfectionists in this project, I admire you both.

@Raptor50aus 3 ай бұрын

Amazing work as always !

@zxguy747 3 ай бұрын

You guys are awesome! Love all of your projects

@mitchellmartin2505 3 ай бұрын

That's awesome can't wait for the next video

@simonsutherland814 3 ай бұрын

Awesome, you guys are amazing👍🏻

@RCnerd74 3 ай бұрын

Congrats to this insane rc project🎉 Wish you all good luck for the maiden flight🛫👍🏻

@ltfadl1 3 ай бұрын

Outstanding, I can't wait to see the flight video.

@rogerwells6229 3 ай бұрын

Can not wait to see it fly! Awesome!